Used Brandt Kdn 330 for sale (96)

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Fpodoxya Rtjpfx Adasd with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: used, machine/vehicle number: 008371, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Corner Rounding Unit: yes Max feed speed: 16 m/min Maximum panel thickness: 60 mm Fpedpfx Adex Swfboajd Operating Units: 7 nr

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! Fodpsxw Tugjfx Adaopd TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 0-261-20-4583, Edge banding machine BRANDT , Type O KDN 200 Ambition 1200, used, Year of manufacture 2010 Air pressure 6 bar The power supply voltage 400V – 3 ph - 50 Hz Total power 4 kW Work piece thickness from 0, 3, 4 to -8,50 mm Extraction diameter 3 x 60 working height 950 mm Feed speed/ Sealing side speed: 10m/min Coil cut off max: 0,4 mm -3,0x45 mm noise emission db(A) 84 to 87 Transport/overall dimensions L3.450xW1300xH2180mm Net weight 1200 kg Gluing, End cutting, Top & Bottom trimming, Scraping Price Euro 4900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. Fpsdpfeh Ak D Uex Adasd We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 2600 kg Measurements height 2300 mm Fedpex E Eggofx Adaepd Dimensions Machine Length 6060 mm This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine. Application Types Edge Banding

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, power: 25 kW (33.99 HP), workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, Equipment: CE marking, TECHNICAL DETAILS Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 12 mm Maximum feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge preheater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Corner rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Fodpfxsytr Rgj Adaopd Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total power: 25 kW EQUIPMENT Panel support guide Spraying unit Control with more than 20 control systems CE marking The machine is sold and delivered in its actual and legal condition ('as seen and agreed'), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Condition: ready for operation (used), Year of construction: 2011, Additional Equipment Fodpfx Adex D N T Eoajpd Joint trimming unit Gluing unit Snipping unit Pre-milling unit Shaping trimming unit Profile scraper blades Surface scraper blades Buffing unit Grooving unit This BRANDT KDF 890 2CU edgebander was manufactured in 2011. It features a joint trimming unit, gluing unit, snipping unit, pre-milling unit, shaping trimming unit, profile scraper blades, surface scraper blades, buffing unit, and grooving unit. Consider the opportunity to buy this BRANDT KDF 890 2CU edgebander. Contact us for more information. Application Types Edge Banding

Condition: excellent (used), Year of construction: 2017, I sell the fully equipped edge banding machine BRANDT KDF 230 AirTec, year 2017: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible / AirTec unit Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Fjdpfx Adeythxmeaepd Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 5070mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: ready for operation (used), Year of construction: 2016, workpiece width (max.): 40 mm, total height: 950 mm, product length (max.): 3,672 mm, This BRANDT Kantenanleimmaschine Ambition 1110 KDF 110 was manufactured in 2016. It is a single-sided edge banding machine designed for processing straight workpiece edges. With a total length of 3672 mm and a feed speed of 8 m/min, it accommodates workpiece thicknesses from 8 to 40 mm. Consider the opportunity to buy this BRANDT Kantenanleimmaschine Ambition 1110 KDF 110 edgebander. Contact us for further details. • Machine type: Single-sided edge banding machine for straight workpiece edges • Feed speed: 8 m/min • Working height: 950 mm • Workpiece and edge parameters • Workpiece thickness: 8–40 mm • Workpiece width: min 70 mm (thickness 8–22 mm) or 120 mm (thickness 23–40 mm) • Edge material (rolls): 0.4–3 mm • Edge material (strips): 0.4–3 mm • Max. edge height: workpiece height + 5 mm • Processing units (aggregates) • Joint trimming unit: 2 x 0.75 kW, 200 Hz motors (one climb-milling, one counter-milling) with diamond cutters • Gluing unit (A3): Quick-change application unit; electronic thermostat for temperature monitoring • End trimming unit: 2 x 0.18 kW, 200 Hz motors for front/rear edge overhang trimming • Flush/radius trimming unit: 2 x 0.27 kW motors, manually adjustable between flush, radius, and chamfer • Profile scraper: For rounding or chamfering pre-milled PVC edges (max 3 mm) • Glue joint scraper: Removes adhesive residue in glue joint area • Control and electrical • Control unit: EASY CONTROL EC 10+ with 7" widescreen touchscreen • Program memory: Up to 20 processing programs • Supply voltage: 400 V / 3 Ph / 50 Hz • Full load current: 15.0 A • Pneumatics: Min. 6 bar • Operation and maintenance • Adjustments: Manual adjustment of units (pressure beam, trimming, pressure zone) with digital mechanical counters • Lubrication: Manual central lubrication for the transport chain (standard) • Safety: CE-conform; dust-tested (TRK max. 2 mg/m³) Technical Specification Fpjdpfx Aeyir S Nodajd Feed Speed 8 m/min

Condition: good (used), Year of construction: 2007, EDGEBANDING MACHINE WITH JOINTING AND COPY MILLING; RELEASE AGENT APPLICATION, MACHINE USED FOR PUR GLUING^ Technical Data: Workpiece thickness: 8 - 50 mm Edge thickness: * Fixed lengths: 0.4 - 8.0 mm * Coil material: 0.4 - 3.0 mm (max. 0.8 x 55 mm or 3 x 45 mm) Feed rate: 11 m/min Electrics: 400 V, 50 Hz, 3 Ph. Equipment: Adjustable infeed fence Centrally adjustable overhead pressure Central manual chain track lubrication Control panel at machine infeed Release agent application Jointing unit: 2 x 2.2 kW 1 clockwise, 1 counterclockwise Max. material removal: 3 mm Gluing station with clockwise and counterclockwise operation 1 main pressure roller and 2 post-pressure rollers End trimming unit: 2 x 0.18 kW Pulling cut for high precision Pneumatic adjustment for straight and chamfer cutting via program Flush milling unit: 2 x 0.55 kW With vertical and horizontal tracing 2 working positions selectable via program: flush and radius milling, all axis adjustments with digital counters for quick setup Profile milling unit: 2 x 0.35 kW For profile milling of edge corners Max. edge thickness: 3 mm Max. workpiece thickness: 55 mm With pneumatic 2-point adjustment for chamfer/radius Scraper unit with quick-change heads Tracing above, below, and laterally With 2 additional quick-change heads Glue line scraper device, Pneumatically controlled Tracing above and below Cleaning agent application Fodpfx Adeyrfh Nsajpd Buffing unit: 2 x 0.09 kW With cleaning agent application Control system: POWER CONTROL PC 20 +

Condition: used, machine/vehicle number: 008160, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Fjdsxqm Iyjpfx Adaepd Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 006603, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Fpsdpoyngz Aofx Adasd Operating Units: 8 nr

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Pre-milling aggregate Glue station for granulate Pneumatic pre-cut guillotine Fpjdpfxox I A Duo Adaod Trimming unit with two saw blades Profiling milling unit with profile cutters Profile scraper Polishing units Year of manufacture: 2009 Machine length: 3.7 m

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Fpodpfxevvkd To Adajd Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Fjdpfx Adevvkfwjaspd Storage location: Nattheim

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Brandt KDF 430C edge banding machine for sale in very good condition! EDGE THICKNESS: 0.4-8 mm Fpedpfjytb Smjx Adaod WORKPIECE THICKNESS: 8-60 mm with motorized height adjustment FEED RATE: 11 m/min TOTAL LENGTH: 4770 mm Radius scraper with pneumatic adjustment Surface scraper Buffing unit

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Edge banding machine KTD51 for shaped profiles and straight edges, with direct glue application. Minimum workpiece length: 160 mm, workpiece thickness: 10 – 40 mm, edge thickness: 0.5 – 1 mm, inner radius approx. 25 mm. Year of manufacture: 1993, feed speed adjustable from 4 to 9 m/min, 2.6 kW, 400 Volt. Fjdpfx Adevf H I Tjaspd

Condition: good (used), Year of construction: 2004, Machine equipped with groove milling cutter, cross-cutting unit, 2 saws, milling station, corner copying, radii with surface pull blade. Total connected load 10 kW, 6 bar compressed air connection. Air consumption per cycle: 43 l/min. Dimensions: 4740 x 1635 x 1706 mm. Body size: 3100 x 1040 x 1706 mm. Edge thickness: 40 – 8 mm. Good condition. Transport possible at extra cost! Fjdpfxeyl Uure Adajpd

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, - Max. feed rate: 11 m/min - Max. edge thickness: 3 mm (coils), 8 mm (strips) - Max. workpiece thickness: 50 mm - Joint milling cutter - Gluing unit - End trimming unit Fjdpfx Aoypbzyedaopd - Milling unit - Corner copying unit - Scraper blade – radius & flat - Buffing (polishing) unit

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, - Max. feed rate: 16 m/min - Max. workpiece thickness: 60 mm - Max. edge thickness: 3 mm (rolls), 12 mm (strips) - Jointing cutter - Gluing unit - End trimming - 2x milling Fpodpfx Asypbugodajd - Corner copying unit - Scraper (radius + flat) - Buffing - Release agent spraying !!! Including return conveyor !!!

Condition: used, machine/vehicle number: 008363, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Fpodpfx Adsx Swddjaed Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2005, machine/vehicle number: 0-261-06-3662, functionality: fully functional, operating hours: 6,635 h, power: 16.2 kW (22.03 HP), input voltage: 24 V, input current: 35 A, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, actuation type: electric, We offer this used Brandt KDF-670 edge banding machine, year of manufacture 2005. Technical specifications: Manufacturer: Brandt Kantentechnik GmbH Model: Brandt KDF 670 Year: 2005 Workpiece height: approx. 8 – 60 mm Edge thickness: approx. 0.4 – 8 mm (depending on material) Feed speed: approx. 11 m/min Glue system: Hot-melt adhesive (EVA) Edge material: ABS, PVC, melamine, veneer, solid wood strips Operation: Control panel on the machine Aggregate equipment: Fpedpfoyr S Enex Adaed - Jointing unit - Glue application with gluepot - Pressure section with multiple pressure rollers - End trimming unit (front / rear) - Flush trimming unit - Radius trimming unit - Scraper unit (radius / flat) - Buffing unit Condition: Used machine Fully functional, with age- and use-related signs of wear Other information: Machine inspection under power possible by appointment Loading possible by arrangement. If you have any questions or require further information, please do not hesitate to contact us by message or phone.

Condition: used, maximum load weight: 400 kg, overall weight: 2,600 kg, axle configuration: 1 axle, first registration: 03/2000, total width: 2,500 mm, total height: 3,200 mm, For sale: Brandt beverage trailer, type with superstructure. 4.50 m long, 2.50 m wide, and 3 m high. Equipped with a cooling cell and counter with tap system. The trailer has a new hatch on the right side, which is not yet wrapped. Full wrapping to your specifications can be arranged for an additional charge. New roadworthiness certificate (TÜV) upon purchase. Fodpjyrk E Tefx Adajpd

Condition: refurbished (used), Year of construction: 1995, machine/vehicle number: 0-261-03-5668, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 55 mm, edge thickness (max.): 12 mm, height adjustment type: mechanical, feed rate X-axis: 13 m/min, actuation type: electric, total height: 1,840 mm, total length: 4,985 mm, overall weight: 1,700 kg, year of last overhaul: 2021, Equipment: CE marking, documentation/manual, Due to a shortage of personnel and the closure of our carpentry shop, we are selling our Brandt KD 83 edge banding machine with the following technical specifications: Workpiece thickness: 10-55 mm Workpiece length: min. 160 mm Workpiece width: min. 65 mm Edge thickness: 0.4-12 mm Roll splitting: 3x45 or 0.8x60 Feed speed: 13 m/min Pneumatics: 7 bar Further technical details can be found in the attached brochure. Fpsdpsyr H U Rofx Adajd The machine was completely overhauled in June 2021 by Kaul GmbH in Düsseldorf for a net price of EUR 5,415.94. The invoice is available. A cabinet (W x D x H = 1130 x 680 x 1960 mm) including several hundred meters of ABS edging without hot-melt adhesive is also included in the offer. The machine is fully operational and can be thoroughly tested on site. A forklift for loading onto a truck is available. Sale including invoice, plus 19% VAT, ex works Essen.

Condition: good (used), Code: 0134 Brand: BRANDT - GERMANY Fpjdpfx Adewq Sc Soaod Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280