Used Briquette press for sale (25,168)

Call

Condition: as good as new (ex-display), Year of construction: 2022, Available ex works * Includes 1 year warranty. Your advantages: + very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. C7m2mgj Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depends on material Throughput capacity: up to 20 kg/h. *depending on material Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, motor: 2,2 kW, 400 V - 50 Hz, noise emission: 62 dB, Requirements raw material: -wood chips and dust smaller than 15 mm in length -moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra cost: -Timer function + 690 € net Machine is started manually and switches off automatically after set time X. -level indicator for auto operation + 995 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2,2 kW, extra charge + 590 € net (delivery time then approx. 5 weeks) ---

more

Listing

Nevers

(dealership location)

7,297 km

Briquette press

REINBOLD RB 200 PLUS

€19,000

Hydraulic pellet mill or briquette press for S

Call

Condition: ready for operation (used), Technical characteristics Briquettes Ø 80 mm Hourly production 140 to 200 kg Hopper 2000 x 2000 mm Automatic control of the length of the briquettes Automatic level detection probe 90% waste volume reduction Briquettes from wood chips, shavings, sawdust and dust, OSB mixture, medium, paper, cardboard, straw, polystyrene, aluminium dust... Cycle management by 11 kW hydraulic power unit and electrical cabinet Cuzdlr73zn Power and Motors Overall dimensions

more

Listing

Hessisch Lichtenau

6,811 km

RUF RBK 55/2500/120 S

€35,000

Call

Condition: used, Year of construction: 2009, Revolver briquetting press RUF type RBK 55/2500/120 S Hydraulic pellet press or briquette press for grinding sludge, metal chips, or the like make no. 70002 year of construction 2009 Briquette diameter 120 mm Briquette length in the pre-compressor approx. 120 mm Pressing force in the pre-compressor 30 tons at 260 bar Briquette length in the main compactor approx. 80 mm Pressing force of the main press cylinder 250 tons at 260 bar Stroke size of the main press cylinder 120 mm Pressing force of the counterpressure cylinder 250 tons at 260 bar Stroke size of the counterpressure cylinder 15 mm Piston diameter of the main press cylinder 350 mm Pressing stroke cycle time approx. 30 sec. for grinding sludge with low residual oil content Hopper size of the screw conveyor 1000 x 600 mm Motor power hydraulics 37 kW Mains connection 400 Volt, 50 Hz, 45 kW - Revolver with 5 stations for large material throughput - Precompressor stage for material pressing into the turret disc - 2 pcs. opposing main press cylinders with 120 mm and 15 mm stroke - ejection cylinder for ejecting the finished briquettes from the turret disc B2afyzgv70 - stepless adjustment of hydraulic speed for each pressing stage - was used for grinding sludge from metal processing - material hopper as hopper with screw conveyor - in 2018 the machine was overhauled in the RUF factory - in 2020 a new SIEMENS Simatic touch panel was installed - only few operating hours after the overhaul very good condition grinding sludge recycling - big saving by the cooling lubricant recovery - large savings in disposal costs due to the reduction in volume and weight of the grinding sludge - Grinding sludge briquettes with low residual oil content can possibly be classified as ?non-hazardous waste?

more

Listing

Karsin

6,294 km

Briquette Press BP 500A

ump BP 500A

€35,000

Hydraulic briquette press

Call

motor power: 30,000 W, briquette diameter: 150 mm, overall weight: 3,000 kg, Condition: like new (used), Year of construction: 2014, Capacity: 450-500 kg/h Max. pressure force: 1700kg/cm2 Batch moisture content: 15% Length: 1800 mm Bhdvissdvew Width: 1800 mm Height: 1900 mm Transport height: 2200 mm Weight: 3000 kg Total power: 33 kW

more

Listing

Tylicz

5,990 km

Ach13 13

€3,900

ONO plus VAT

Call

Condition: good (used), Year of construction: 2008, Briquetting machine 18kw Works very well Bqgfpw0tw8

more

Listing

Wijchen

(dealership location)

7,087 km

Extraction system with waste press + briquette

Höcker Polytechnik

Call

Condition: used, Year of construction: 2006, Large extraction unit, currently used for paper dust. Will be dismantled mid-July. suction H&ouml cker Polytechnik Year of construction 2006 Return air Band hose coupling Dimension drawn up 8000x2500x11000mm (LxWxH) 106kW, fused 315 Amp briquette press H&ouml cker Polytechnik BrikStar C 3-19-L 4.3kW, 400V 25kg/h Funnel volume 3m&sup3 Oil tank 50l Dimensions 2015x2360x1300mm, 830kg Separator (2pcs) H&ouml cker Polytechnik Baler (2pcs) Kampwerth-Presto SHD 1600 Year of construction 2006 Empty weight 3500kg 7.5kW Dimensions 5000x2300x3700mm (Disassembled for transport) Container box for baler (2 pieces) Year of construction 2006 7snsybg0fa Volume 30m&sup3 Empty weight 3200kg Filled weight 15,000 kg Dimensions 7000x2400mm

more

Listing

Neckartailfingen

6,836 km

Briquetting press, briquette press

mütek Systemtechnik MPP 60

€14,995

Briquette Press Briquette Press Aluminum

Call

Condition: new, Year of construction: 2022, ready produced Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt .: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW Bst09lehrk 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

more

Listing

Zielonka

6,299 km

Mütek NEM 300

€44,600

Call

Condition: used, Year of construction: 2016, Aluminium chip briquetting line with coolant recovery. Equipped with: drip tray, chip hopper, ascending feeder, magnetic separator and coolant purification system. Production of briquettes has many advantages: • Reduction in volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Inexpensive disposal • Profitable sales Fw70aj7 Technical data: Throughput: up to 300 kg / h (depending on the material), Briquette diameter: Ø 70 mm, Motor: 7.5 KW, 400 volts / 50 Hz / 3-phase, . Dimensions: 2095 x 1300 x 1400 mm l/w/h Weight: 1300 kg. . Year of manufacture: 2016.

more

Listing

Kecskemét

6,042 km

Briquette press

RUF Lignum Classic

€66,900

ONO plus VAT

Call

Condition: new, Year of construction: 2023, RUF LIGNUM CLASSIC BRIQUETTING PRESS FOR WOOD THE ADVANTAGES FOR YOU AT A GLANCE: - Fully automatic 24h operation possible - Long service life - Low maintenance costs - Compact construction - Direct incorporation into existing production facilities possible - More than 35 years’ experience Bcsoo7jsqwb The RUF LIGNUM Classic wood briquette press is ideally suited to briquetting medium quantities of wood chips that are produced as a waste product of the wood processing industry. Thanks to the process of briquetting, additional revenue can be earned and storage and transport costs are cut. Another advantage can be found in the flexibility of our wood briquette presses. They can press various grain sizes of material into high-quality briquettes, completely without the use of binding agents. As a result, as a valuable source of energy, RUF briquettes actually have a higher utilisation value and an optimum CO2 balance. Our LIGNUM range also performs well in terms of having a high level of energy efficiency and a low level of wear and tear, thanks to our innovative RUF hydraulics. - Max. throughput rate (kg/h) Wood: 410 - Power (kW): 30 - spec. Pressure, max. (kg/cm²): 1700 - briquette formats (mm): 150x60 - Size (m) Lenght x Width x Hight: 2,1 x 1,9 x 2,0 - ca. weight (t): 3,3 t - with suction hoods - PACKAGING TABLE is GRATIS

more

Listing

Göd

6,097 km

Briquette press

Mekom MiniBRIK-30

€9,900

Ruf Briquette Press Drum Dryer

Call

Condition: new, Year of construction: 2023, Hydraulic briquetting press with 4 kW main motor. It produces 50mm diameter briquettes. Capacity of the machine is: 30-50 kg/hour. The raw material hopper is 1m3, and has an agitator on the bottom. The machine has an oil cooler for the continous work. 2sfpxy

more

Listing

Elmstein

6,937 km

Ruf Lasco Modesta Nestro Zeno

Call

Condition: excellent (used), Year of construction: 2019, We sell our complete briquette production. Ruf briquette press RB1500 Bj.2019 with only 1300 operating hours. Lasco hot air furnace LA 750 Bj. 2013 with only just 6000 operating hours, Modesta extraction 45 KW, Nestro vacuum filter house 18.5 KW with discharge and as good as new rotary valve,drum dryer 2021 newly built 5.4 meters diameter 21 meters long, various screw conveyors and storage tanks. If desired, a sawmill property with a large residential house can also be purchased. Bprfcnapdk

more

Listing

Jongejans / Höcker Polytechnik PGF350-7,5 / C3/12

Wijchen

(dealership location)

7,087 km

Extraction system with briquette press dust

Jongejans / Höcker Polytechnik PGF350-7,5 / C3/12

€14,500

ONO VAT not applicable

Call

Condition: used, Year of construction: 2004, Extraction system with briquette press Rgzif Extraction Jongejans PGF350-7.5 Capacity 8650 m&sup3 /h Filter size 325x1000mm Number of filters 8 Built in 2004 Weight 1850kg Briquetting press H&ouml cker Polytechnik C3/12 L Built in 2004 Motor 3kW, 400V, 7.2Amp 30kg/h Diameter briquettes 65mm Total dimensions: 2300x1800x5000mm (LxWxH), Weight +/- 2500kg Disassembled for transport in 2 parts, need 4 loading meters.

more

Listing

Neckartailfingen

6,836 km

Briquetting press, briquette press aluminum chips

mütek Systemtechnik MPP NEM 900

Call

Condition: new, Year of construction: 2023, Briquetting press NEM 900: machine starts at a special priice of € 69.980 net production time appr. 4 - 5 months for briquetting aluminum chips Throughput: up to maximum 420 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . Options for an extra charge: Cooling System + € 6.900 net Emulsion collecting tray with pump + € 4.980 net Bq9ixnblmu * Installed under the press For the recovery of cooling lubricants Including: pump . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

more

Listing

Bergatreute

6,798 km

Briquette press for metal dust

Ruf RB 880

€80,000

Briquette press, Briquetting press BrikPress 240

Call

Condition: good (used), Year of construction: 2003, Briquetting press for metallic waste, chips, dust Bgxnd2ypiu Plant as new , used only for trial purposes

more

Listing

Wijchen

(dealership location)

7,087 km

Strautmann BrikPress 240 HP ES 30

Call

Condition: used, Year of construction: 2016, Briquette press Strautmann BrikPress 240 HP ES 30 Year of construction 2016 Surface load 700 kg/m&sup2 Mzww3n8 400V Motor power 30kW fused 100Amp category C Press force 380kN Briquette dimensions 240x240mm User manual available Dimensions 5460x2244x2654mm, weight 5000+1600kg

more

Listing

Neckartailfingen

6,836 km

Briquetting Press / Briquette Press

mütek Systemtechnik MPP 110

Call

Condition: new, Year of construction: 2022, Machine in production Available immediately Very robust machine with high pressing force - is also suitable to produce already a saleable briquette quality *depending on the material. The large dimensioned press cylinder and the 65 mm briquette make this possible. Our best selling briquetting press series + Proven, simple technology, for extremely low error rate + 25 years of experience, further development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + 3,995 € net, (can also be retrofitted at a later date). * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber + 1.975 € net recommended for light starting materials such as wood shavings commodity code: 84793010 briquette diameter: 65 mm front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Capacity (depending on material): up to 110 kg/h*. at the last test approx. 87 kg/h. *depending on bulk density *based on a bulk density of 200 kg per cubic meter . motor power: 5,5 kW 400 Volt / 50 Hz / 3 phases length: 1925 mm width: 1100 mm height: 1500 mm Bhm2d8ztcp weight: 800 kg Oil quantity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0,7 qbm Pump: 37 liters Hydraulic pre-compressor Option cooling pressing tongs: yes, with special accessories cooling pressing tongs Cooling of pressing tongs via water tank (to be provided by customer) Option cooling hydraulic oil: yes Option filling level monitoring: yes Option strand briquette: yes (depending on material) CE conform . Raw material requirements: - Moisture content (atro) must be between minimum 6 to maximum 18 %. - Chip length maximum 15 mm - Set-up temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear can be the result

more

Listing

Neckartailfingen

6,836 km

Briquetting press, briquette press

RUF Serie R2

Call

Condition: as good as new (ex-display), Year of construction: 2023, Delivery time *depends *Prior sale expressly reserved *Round silo at extra charge Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction Hydraulic briquetting press for rectangular briquettes Type R - throughput up to maximum 500 kg / h * depending on the specific weight of material. Based on a bulk weight of 220 kg / m³. Ct33csvc8 + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics + 25 years of experience . * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material . Drive motor: 22 kW - IE 3 400 V / 50 Hz / 3 phases Oil cooler: 2.2 kW Agitator: 0.55 kW Screw: 1.5 kW . Hopper: 400x800mm Capacity of approx. 150 liters . Soft start for hydraulic motor Siemens PLC S7-1200 . Auto start and stop via a light barrier integrated in the feed hopper Up to 560 briquettes per hour . Specific pressing pressure: 1,700 kg / cm² Up to 300 bar pressing pressure Briquette format 150x60 mm Briquette length: 40 to 110 mm (adjustable) Dimensions: 2.9 x 2.0 x 2.1 m Weight: 3,800 kg. 600 liter hydraulic oil tank The control is designed for operation from + 10 degrees to +35 degrees . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - Installation temperature: temperature-controlled room at at least + 8 ° C Otherwise, we recommend heating for an extra charge - The loading must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear can be the result.

more

Listing

Neckartailfingen

6,836 km

Briquette Press Briquette Press Aluminum

mütek NEM 90

Call

Condition: new, Year of construction: 2023, Machine available ex works Basic machine from 34.995 € net Options against surcharge: Cooler + 4.895 € net *recommended emulsion collecting tray + 4.590 € net briquette transport 1,5 m + 490 € net Throughput capacity: up to 90 kg/h (depending on material), Briquette diameter: Ø 50 mm, motor: 5,5 KW, 400 Volt / 50 Hz / 3-phase, Bixvstdg pump: 40 liters, . Briquette length max.: 50 mm, Briquette length opt.: 40 mm, diameter silo: 1.000 mm, Silo: 0,5 m³ Agitator included, Oil tank 110 liters . Dimensions: 1750x1130x1100 mm lxwxh Weight: 680 kg. . Hydraulic pre-compression via slide valve Main press cylinder Vertical cylinder . Prepared for connection of a cooling unit Optional, level indicator: yes . Requirements to the raw material - Max. Chip length: 15 mm - Installation temperature: tempered room at least +5°C - Max. Weight on agitator: 200 kg. - The feed must be free of magnetic metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear can be the result

more

Listing

Neckartailfingen

6,836 km

Briquetting Press | Briquette Press

mütek MFP 35

Call

Condition: as good as new (ex-display), Year of construction: 2022, Available ex works Demonstration machine with approx. 10 operating hours Your advantages: + very robust, simple technology Cn7ytuppw + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 35 x 35 mm (square), briquette length: 5-40 mm *depending on material throughput capacity up to 25 kg / h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height), weight of the machine: approx. 250 kg, capacity of the silo: approx. 250 liters, motor: 2,2 kW, 400 V - 50 Hz, noise emission: 62 dB, Requirements raw material: -wood chips and dust smaller than 15 mm in length -moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: -Timer function + 690 € net Machine is started manually and switches off automatically after set time X. -level indicator for auto operation + 995 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2,2 kW, C7m2mgj Additional price + 590 € net (delivery time then approx. 7 weeks) ---

more

Listing

Neckartailfingen

6,836 km

Briquetting press, briquette press

mütek MPP 450 S

Call

Condition: as good as new (ex-display), Year of construction: 2022, Basic machine from 49.995 € net *Production time approx. 4-5 months Bqpezqpxro very robust machine with high pressing force and permanent agitator - is also suitable to produce already a saleable briquette quality *depending on the material. The large dimensioned press cylinder and the 80 mm briquette make this possible. + Proven, simple technology, for extremely low error rate + 25 years of experience, further development and know-how + More than thousand machines of this series in operation with satisfied customers + Good price-performance ratio Product tariff number: 84793010 Briquette diameter: 80 mm Front bushing: 125 mm Briquette stroke max.: 100 mm Briquette stroke opt.: 80 mm capacity (depending on material): up to max. 300 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter . motor power: 15 kW length: 2500 mm width: 1500 mm height: 1730 mm Weight: 1800 kg Oil quantity: 550 liters Silo diameter: 1200 mm Silo capacity: approx. 1 qbm Pump: 90 liters Hydraulic pre-compressor Option cooling pressing tongs: yes, with special accessories cooling pressing tongs Option cooling hydraulic oil: yes Cooling of pressing tongs and hydraulic oil with cooling unit (special accessory) Option filling level monitoring: yes Option strand briquette; yes (depending on material) Option enlarged filling slide: yes, with special accessory enlarged filling slide CE conform . Raw material requirements: - Moisture content (atro) must be between minimum 6 to maximum 18 %. - Chip length maximum 20 mm - Set-up temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and / or increased wear can be the result

more

Listing

Nevers

(dealership location)

7,297 km

Briquettes Press

E60 SUPER

€12,000

Briquetting press, Briquetter aluminium

Call

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Snvjh Pluging: Three-phased Power: 7,5 Kw Motor: 10 CV Overall dimensions Lenght: 1850 mm Width: 1170 mm Height: 1510 mm Weight: 800 Kg

more

Listing

Sidzina

6,087 km

Briquettes press

PRODECO

Call

Condition: as good as new (ex-display), Year of construction: 2014, 7,5kW 100kg /h only 300 mth 8t2rezgffq

more

Listing

Neckartailfingen

6,836 km

Muetek MPP NEM 300

Call

Condition: as good as new (ex-display), Year of construction: 2023, basic machine: Special price of € 39,995 net Oil cooler + € 4.895 net (recommended) U9ud82upt Options at extra cost: Emulsion collection tray + € 4,590 net Briquette transport 1.5 m + 490 € net Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

more

Listing

Radom

6,026 km

Proofing press

Proofing press 55x65cm Antique

Call

Condition: good (used), Proofing press 55x65cm Antique The machine is in very good condition, can be used as an exhibit or as a printing machine. Max. format 550×650 mm Weight 650 kg Flow table, system of claws holding the sheet. Bilj83mwldh Electrically driven spreading roller.

more

Listing

Bosna Hersek, Konya Sk. No:5 D:408, 42250 Selçuklu/Konya, Türkei

4,846 km

Hydr. H Frame Press with movable Plate

Intemach Press IHS 400

Call

Condition: new, Year of construction: 2023, Hydraulic H Frame Press with movable Plate Capacity: 400 Ton Controll : by 2 Hand Bottom Main Cylinder : Ø 430mm. Auxilitary Cylinder : 2 pcs. Ø 110 x 55mm. Main Motor : 37kw. - 75hp. ( IE-3 ) Pumpe : 140cc. - 204LT BOSCH/REXROTH Speed: Down-140mm/sec. Working Speed13 - 5mm/sec Upspeed:150mm/sec Daylight : 1000mm Stroke: 700mm Movable Plate: 1500x1000mm Upper Plate : 1500x1000 Hydraulic: All the Hydraulic System will be top of the Machine Hydraulic System : BOSCH/REXROH Pressure & Speed Adjustment Side Cover doors Hydraulic Top Plate Lock system Bewekcrsenv Mechanic Top Plate Lock System Automatic Lubrication System Oli Capacity : 1100 Lt Controller: Controller: SIEMENS S/7-1200 Electric Cabinet ( CE) Portable Control Panel Remote Connection System Security PLC Soft Starter Light Curtains on Front & Back Side Movable 2 Hand Control PLC Touch Screen: SIEMENS 12'' Working Area Ilimination 8 pcs free IN & OUT put-on PLC Movable Table: Stroke of the Movable Plate:1200mm Hydraulic Movement with external Motor and Pump Support Sliding System Table Paralelity: 0,05mm/ per m² All the Capacity,Dimentions and Options can be offered according to Customer Requirements Pls Contact us more Informations.

more

Listing

Avižieniai

5,862 km

Metal Strip Unwinding - Winding

Clark’s press equipment

€1,300

HEAT PRESS T-SIRT AUTO PNEUMATIC

Call

Condition: used, Metal strip unwinding - wrapping machine for the production of fencing strips. Specification: Model: Clark's press equipment Maximum sheet thickness: 0.5 mm Other: speed is not adjustable Made in: England Bhswc8xu39q Available in two units. If you have any further questions, we will be happy to answer them.

more

Listing

ΕΟ3, Εορδαία 502 00, Ελλάδα

5,806 km

GREEN PRESS GREEN PRESS 4060dGR PS-7A

€2,800

Call

input frequency: 50 Hz, input current: 220 A, power: 3.5 kW (4.76 PS), Condition: new, Year of construction: 2023, Automatic pneumatic heat press for transfer stamps and vinils on Tshirts or other materials.Press size 40X60cm. Qvzzr

more

Listing

Strassberg

(dealership location)

6,847 km

Cold Press for Multi layer Parquet

PROFI PRESS PPCT - 60

Call

Condition: used, Year of construction: 2023, Press capacity: 60 ton Stroke: 400 mm Rhljv Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 150 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1500 x 1400 x 2600 mm Weight of machine approx.: 3,5 ton

more

Listing

Hydraulic Press For Engineered Flooring Deck Art CP 300/2500(3800) MK3 Digital

Vrbas

6,028 km

Hydraulic Press For Engineered Flooring Deck Art CP 300/2500(3800) MK3 Digital

Call

Condition: new, Year of construction: 2023, Introducing Deck Art Machines Digital Flooring Press: C8ten7xxm Our Cold Hydraulic Gluing Press MK3 Digital Series is more than a machine – it's a testament to engineering excellence. Created specifically for the engineered flooring landscape, these machines encapsulate efficiency, precision, and simplicity in one sleek package. Dive into a realm where every output is nothing short of perfection. Standout Features: • Intuitive Operation: Navigate seamlessly with a 15'' touchscreen interface. • Precision Guaranteed: Digital pressure monitoring ensures immaculate lamination each time. • Adaptive Pressure Mechanism: Modify pressure settings to suit varying flooring dimensions. • Automated Mastery: Automatic pressure adjustments and clamp releases to enhance workflow. • Eco-Driven Performance: Our hydraulic pump prioritizes power efficiency without compromising on performance. • Stay Connected: Remote online control and diagnostics to keep your operations smooth. • Versatility in Gluing: Multiple gluing cycles, complemented with stop valves for varied flooring lengths. • Consistency in Every Press: Self-aligning plates and hydraulic beams ensure every lamination is impeccable. • Adjustable Back Supports: Our specially designed back supports keep the material centered, enabling even pressure distribution for different flooring widths on a single press. • Motorized Conveyor System: The built-in motorized conveyor system effortlessly transports material from the glue spreading machine to the press, with digitally controlled speed for precise operation. For those who envision the future of flooring, the Deck Art Machines Digital Flooring Press is your answer. Join hands with us, and let's shape the flooring industry's next chapter together. - Max gluing widths - 310 mm (Up to 500 mm upon order) - Max gluing length - 2560 mm to 7680 mm (Unlimited upon order) - Max gluing height - 800 mm - Working height - From 800 to 850 mm - No of pressing cylinders (total) - From 16 to 24 pcs (Unlimited upon order) - No of independent pressing cycles - From 4 to 8 cycles (unlimited upon order) - Pitch between pressing cylinders - 320 mm - Each cylinder has its own stop valve - Yes - Single stroke - 80 mm - Single cylinder pressure - 9.100 kg - Cylinder pressure in total - From 145.600 kg - 218.400 kg (Unlimited upon order) - Working pressure - Adjustable - Max working pressure - From 14 kg/cm2 (For 200 mm width) to - 10 kg/cm2 (For 300+ mm width) - Pressing plate type - Self Aligning! - No of front aligning beams - 4 pcs (Unlimited upon order) - Front beams type - Hydraulic - Front Beam Pressure - Up to 1000 kg; adjustable - Max system pressure - 18 Mpa - Motorized material transfer conveyor - Yes, on both sides, independent - Speed of material transport - Up to 30 m/min - Speed regulation of transfer conveyor - Yes, both sides, independent - Power of hydraulic pump - 5.5 kW (1 pc) - Power of motor for transportation - 2x0.18 kW - geared - Voltage - 3x400v/50 Hz - Electricity protection IP 54 Apart from our standard models of presses, depending on the buyer's needs and budget, we are able to offer you custom-designed, bespoke presses with various parameters. (Either one-sided or two-sided presses; up to 500 mm max gluing width; unlimited max gluing lengths;...) Feel free to contact us for more information! Deck Art Machines

more

Listing

Radom

6,026 km

Hot stamping press

Hot stamping press HFS 310R

Call

Condition: good (used), HFS 310R hot stamping press Year of production 2021 Description: HFS 310R is a manual toggle press for gilding, embossing paper and plastics. A device useful in every advertising agency and digital printing house. The manually activated pressure makes it independent of the compressed air installation. The elbow design of the press ensures repeatability of work and very high pressure of the matrix on the material. The device is equipped with an automatic foil feed, which significantly shortens the time of a single gilding cycle, a worktop, adjustable embossing depth, a heating plate polished with an accuracy of 0.01 mm, which significantly increases the quality of embossing with large dies, a touch panel and modern OMRON control. Specification: MODEL: HFS 310R Heating plate size: 310 x 210 mm Worktable area: 490 x 350 mm Heating temperature adjustment: from the display to 300°C Gilding foil adjustment: Automatic Potentiometer adjustment Heating plate pressing mechanism: Manual Working gap (piston lifting height): 68 mm Height of the gilded stack: 40 mm Press pressure force: 3 T Power consumption: 850 W Dm2mzj Power supply: 230 V Machine dimensions: 750 mm (W) x 530 (D) x 820 mm (H) Machine weight: 130 kg Instruction manual included.

more

Listing

Bosna Hersek, Konya Sk. No:5 D:408, 42250 Selçuklu/Konya, Türkei

4,846 km

C frame Presses up to 250 ton

Intemach Press ICS

Call

Condition: new, Year of construction: 2023, Chrome Plated Cylinder Adjustable Variable Speed on LCD Touch Screen Steel Welded Frame Oil Pressure Gauge LCD touch Screen Control Panel Air Cooling Safety Cover and Light Barrier T-Slotted Top and Bottom Table Two Hand Button Control Safety PLC Adjustable Variable Pressure on LCD Touch Screen soft Starter Adjustable Stroke on LCD Touch Screen 2 Years Warranty Bosch/Rexroth Hydraulic System According to CE Norms Two Hand Button Control User Manuel Gxj8h0kxih Pls contact us for more options and Informations

more

Listing

Emskirchen

6,733 km

Spindle Press

Spindle Press Krause

Call

Condition: used, machine/vehicle number: KgS, Spindelpresse  - Spindle Press Spindle Press KrauseSerial-No. KgS-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- Jm3exmxs -Available Immediately - Can be inspect- -On Stock Emskirchen / Nürnberg - Can be test-

more

Listing

Konica Minolta bizhub PRESS 1052 inkl. Finisher, Paperdeck

Langenfeld (Rheinland)

7,003 km

B/W printing machine

Konica Minolta bizhub PRESS 1052 inkl. Finisher, Paperdeck

€2,990

Call

Condition: used, In this offer you acquire a used black/white digital printing system "Konica Minolta Bizhub PRESS 1052" Object of sale: 1 x Konica Minolta Bizhub PRESS 1052 with the following equipment: incl. staple finisher FS-532 Dmsa92 incl. relay unit RU-509 incl. paper deck Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 7,627,421 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

more

Listing

Strassberg

(dealership location)

6,847 km

Bookbinding press for gluing blocks

PROFI PRESS PPCT - 100

Call

Condition: used, Year of construction: 2023, Press capacity: 100 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 800 x 500 mm Slide area: 800 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec B80dpuvy Working speed: 10 mm / sec Return speed: 160 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1600 x 1700 x 2930 mm Weight of machine approx.: 5,5 ton

more

Listing

France

7,377 km

Bending machines

EITEL-PRESS RP 100

Call

Condition: ready for operation (used), Year of construction: 1972, This EITEL PRESS RP 100 Bending machine was manufactured in the year 1972 in Germany. Application Types Bending Bdqt9ol9f7g

more

Listing

Radom

6,026 km

Call

Condition: good (used), Bookbinding press for gluing blocks Solid construction, powder coating. Bgjsdodazfh Machine in perfect condition. High pressing force. Electric drying The structure is mounted on wheels for easy movement.

more

Listing

Bosna Hersek, Konya Sk. No:5 D:408, 42250 Selçuklu/Konya, Türkei

4,846 km

Hydr. H Frame Presses

Intemach Press IHS

Call

Condition: new, Year of construction: 2023, Chrome Plated Cylinder Adjustable Variable Speed on LCD Touch Screen Steel Welded Frame Oil Pressure Gauge LCD touch Screen Control Panel Air Cooling Safety Cover and Light Barrier T-Slotted Top and Bottom Table Two Hand Button Control Safety PLC Adjustable Variable Pressure on LCD Touch Screen soft Starter Adjustable Stroke on LCD Touch Screen 2 Years Warranty Bosch/Rexroth Hydraulic System According to CE Norms Two Hand Button Control User Manuel Gxkbbhlozf Pls contact us for more options and Informations

more

Listing

Press brake TRUMPF TrumaBend V130 / Year 2004. Low Price

Backnang

6,824 km

Punching and nibbling machine

Press brake TRUMPF TrumaBend V130 / Year 2004. Low Price

Call

Condition: good (used), Year of construction: 2004, Trumpf TrumaBend V130 Year 2004 Bdjbkfsz9xt 4 axis operation hours: 67000h maintenance by trump

more

Listing

Langenfeld (Rheinland)

7,003 km

B/W printing machine

Konica Minolta Bizhub Press 1250 inkl. Broschürenfinisher, Paperdeck

€2,990

Call

Condition: used, In this offer you purchase a used black/white digital printing system "Konica Minolta Bizhub Press 1250" Object of sale: 1 x Konica Minolta Bizhub Press 1250 with the following equipment: incl. booklet finisher SD-506 incl. paper deck PF-703 incl. Stacker LS-505 Yeooummw incl. relay unit RU-510 Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 25,195,467 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

more

Listing

Strassberg

(dealership location)

6,847 km

Hydr. H Frame Press with movable Plate

PROFI PRESS PPCT - 30

Call

Condition: used, Year of construction: 2023, Press capacity: 30 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 150 mm / sec Cjlxlqfo7s Required power: 7,5 kW Dimensions L x W x H: 1500 x 1400 x 2600 mm Weight of machine approx.: 2,5 ton

more

Listing

Bosna Hersek, Konya Sk. No:5 D:408, 42250 Selçuklu/Konya, Türkei

4,846 km

Intemach Press IHS 400

Call

Condition: new, Year of construction: 2023, Hydraulic H Frame Press with movable Plate Capacity: 400 Ton Controll : by 2 Hand Bottom Main Cylinder : Ø 430mm. Auxilitary Cylinder : 2 pcs. Ø 110 x 55mm. Main Motor : 37kw. - 75hp. ( IE-3 ) Pumpe : 140cc. - 204LT BOSCH/REXROTH Speed: Down-140mm/sec. Working Speed13 - 5mm/sec Upspeed:150mm/sec Daylight : 1000mm Stroke: 700mm Movable Plate: 1500x1000mm Upper Plate : 1500x1000 Hydraulic: All the Hydraulic System will be top of the Machine Hydraulic System : BOSCH/REXROH Pressure & Speed Adjustment Side Cover doors Hydraulic Top Plate Lock system Mechanic Top Plate Lock System Automatic Lubrication System Oli Capacity : 1100 Lt Controller: Controller: SIEMENS S/7-1200 Electric Cabinet ( CE) Portable Control Panel Remote Connection System Security PLC Soft Starter Light Curtains on Front & Back Side Movable 2 Hand Control PLC Touch Screen: SIEMENS 12'' Working Area Ilimination 8 pcs free IN & OUT put-on PLC Movable Table: Stroke of the Movable Plate:1200mm Hydraulic Movement with external Motor and Pump Support Sliding System Table Paralelity: 0,05mm/ per m² All the Capacity,Dimentions and Options can be offered according to Customer Requirements Ho2072mi2 Pls Contact us more Informations.

more

Listing

Langenfeld (Rheinland)

7,003 km

Black/white production machine

Minolta Bizhub PRESS 1250e inkl. Finisher, Paperdeck

€2,990

Call

Condition: used, In this offer you purchase a used black/white digital printing machine "Konica Minolta Bizhub PRESS 1250e" Kzmsque2qf Object of sale: 1 x Konica Minolta Bizhub PRESS 1250e with the following equipment: incl. paper deck PF-703 incl. staple finisher incl. relay unit RU-510 Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 14,912,732 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

more

Listing

Strassberg

(dealership location)

6,847 km

100 Ton Hydraulic C Frame Press

PROFI PRESS PPCM - 50

Call

Condition: used, Year of construction: 2022, machine/vehicle number: 3413, Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Cgoanuivo0 Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

more

Listing

Bosna Hersek, Konya Sk. No:5 D:408, 42250 Selçuklu/Konya, Türkei

4,846 km

Intemach Press ICS 100

Call

Condition: new, Year of construction: 2023, !!! Ready at Stock !!! Dlvw9b Can be Delivered after Blechexpo Exhibition from Stuttgart/GERMANY RAM Capacity : 100 Ton. ( 230 Bar ) Operated Controll : 1. Manuel ( from Double Hand Button, with max.10mm./sec. Speed 10mm./sec. ) with OUT Light Barrier Safety 2. Automatic ( from Double Hand Button, with maximum speed ) with Light Barrier Safety Ram Cylinder : Ø 230mm. Auxiliary Cylinder : 2 pcs. Ø 50 x 30mm. Auxiliary : 2 stk. Ø 50mm. Motor : 11 kW. - 15hp. Pomp : 16cc - 23 Liter / ASC Ram Cylinder Speed : down 110mm./sec. - back 200mm./sec. - pressure : 9mm./sec. Daylight : 500mm. Stroke : 400mm. Ram Table Size: 790 x 600mm. - with T Slotes Bottom Table Size : 790 x 600mm. - with T Slotes Tablehight : 850mm. HYDRAULIC: Hydraulic Block & Valves : BOSCH/REXROTH Pressure Adjustment on PLC Speed Adjustment on PLC Air Cooling Freefil Valve CONTROLLER: SIEMENS S7-1200 Controller System Main electrical Cabinet Portable control Panel for Operator Security PLC Light Guard SICK 700+150mm Lineer Position Sensor for Strok Adjustment 9'' PLC Touchscreen - BEIJER ( German and ENGLİSH Language ) Ethernet Connection for Remote Control 8 free In & OUT puts on the PLC for External Connections The Machine is Produced according to Machinery Norms EN.693. User Manuel & Part List on ENGLİSH and GERMAN Warranty 24 Mounths Oil Capacity: 220 Lt Weight: approx. 5.500 Kg Machine Dimentions : 1300x2000x2750mm LxWxH Delivery: After Blechexpo Exhibition

more

Listing

Langenfeld (Rheinland)

7,003 km

Xerox Versant 180 Press erst ca. 304.000 Ausdrucke

€13,490

Call

Condition: used, In this offer you purchase a used colour production system "Xerox Versant 180 Press" Object of sale: 1 x Xerox Versant 180 Press with the following equipment: incl. paper deck incl. FreeFlow print server incl. stitch finisher incl. feeder unit Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 303,805 pages Colour: Approx. 232,443 pages Black: Approx. 71,362 pages Consumables: Drum Unit BK: 72% Drum Unit C: 73% Drum Unit M: 68% Drum Unit Y: 53% Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Kmjppf2o3f The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

more

Listing

Langenfeld (Rheinland)

7,003 km

Xerox 1000 Colour Press 5-Farben inkl. Fiery + Paperdeck + Stacker

€8,890

Call

Condition: good (used), In this offer you acquire a used colour production system "Xerox 1000 Colour Press". Item for sale: 1 x Xerox 1000 Colour Press with the following equipment: incl. Fiery EX1000 (QX100-07) incl. Paperdeck JCF-1 incl. Stacker LCS-1 incl. A-GW01 incl. 5th colour Meter readings: Total: Approx. 11,193,774 pages Colour: Approx. 8,933,137 pages Black: Approx. 2,260,637 pages Condition: This is a used machine and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The machine has been tested for function A test printout can be seen in the photo Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Zswivbtc Seaworthy packaging and worldwide shipping available on request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

more

Listing

Langenfeld (Rheinland)

7,003 km

Xerox 1000 Colour Press inkl. 5. Farbe, Fiery, Finisher, Paperdeck

€6,890

Call

Condition: good (used), In this offer you acquire a used colour production system "Xerox 1000 Colour Press". Item for sale: 1 x Xerox 1000 Colour Press with the following equipment: incl. Fiery EX1000 (QX100-07) incl. Finisher A-GW01 + LCS-1 incl. Paperdeck JCF-1 incl. 5 colour transparent Meter readings: Total: Approx. 3,661,919 pages Colour: Approx. 2,892,248 pages Black: Approx. 769,671 pages Condition: This is a used machine and may show signs of use (minor scratches or yellowing). The machine has been tested for function A test printout can be seen in the photo Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Cp0vnvfpvr Seaworthy packaging and worldwide shipping available on request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

more

Listing

Langenfeld (Rheinland)

7,003 km

Konica Minolta bizhub PRESS C1060 inkl. Fiery, Paperdeck

€6,490