Used Buffer Memory for sale (1,451)

Condition: used, Year of construction: 2013, Overview This KHS Innopro KZE 72 is a flash pasteurizer (short-time heating system) for beer, cider and other carbonated beverages, built in 2013 by KHS GmbH (Dortmund, Germany). Working with a plate heat exchanger, it gently pasteurizes at a nominal capacity of 72 hl/h and is designed for a product flow between 24 and 72 hl/h with a maximum CO₂ content of 6.5 g/l. The system comes complete with its 50.8 hl buffer tank and the control cabinet with touchscreen HMI. The unit comes out of a large brewery, is still installed and can be visited on request. Technical data - Manufacturer: KHS GmbH (Dortmund, Germany) - Model: Innopro KZE 72/T4-72-12/PT45A - Year of manufacture: 2013 - Machine type: flash pasteurizer with plate heat exchanger - Nominal capacity: 72 hl/h Fpsdpfezvfbcex Aatsl - Minimum adjustable capacity: 24 hl/h - Capacity during CIP cleaning: 85 hl/h - Maximum CO₂ content in the product: 6.5 g/l - Pasteurization temperature: 72 °C (beer) / 85 °C (cider) - Holding time: 30 s - Product inlet temperature: 4 °C; product outlet temperature: max. 4 °C - Supply pressures: product 3.5 bar(g), steam 3 - 6 bar(g), coolant 1.5 - 2 bar(g), CIP 4 bar(g) - Electrical connection: 400 V, 50 Hz, 3-phase - Dimensions pasteurizer skid: approx. 4,600 x 3,500 x H 2,900 mm - Weight pasteurizer skid: approx. 3,100 kg (frame incl. plate heat exchanger) Equipment - Pasteurizer skid with plate heat exchanger type PT45A, pumps and valve manifold - Buffer tank: 50.8 hl gross / 45.5 hl working volume, inner Ø 1,600 mm, H 3,420 mm, approx. 1,120 kg, operating pressure up to 5 bar(g), CO₂ and sterile air connections 6 - 8 bar(g) - Control cabinet with touchscreen HMI - OEM technical documentation (operating manual) Condition Used - good working condition. The system was in production in a large brewery until recently, is still installed and can be inspected. Availability Immediately. Location: Netherlands. Dismantling and loading by arrangement.

Condition: like new (used), Year of construction: 2019, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Screw diameter: 32 mm Shot volume: 103 cm3 Type: Horizontal Drive: Electric FANUC Roboshot α-S100iA : Basic Technical Specifications Mechanism: Double toggle Clamping force: 1000 kN / 100 tonf _(opt. 1250 kN / 125 tonf)_ Die height double platen: 150–450 mm _(opt. 150–550 mm)_ Die height single platen: 220–520 mm _(opt. 220–620 mm)_ Clamping stroke: 350 mm Locating ring: Ø 125 mm Tie bar spacing (H×V): 460 × 410 mm Platen size (H×V): 660 × 610 mm Min. mould size (H×V): 265 × 240 mm Ejector stroke: 100 mm Max. ejector force: 25 kN / 2.5 tonf _(opt. 60 kN / 6.0 tonf)_ 1. Clamping force: 1000 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 2200 bar 4. Min./Max. mold height: 150 mm / 620 mm (extended) 5. Clamping stroke: 350 mm 6. Tie bar spacing: 460 × 410 mm 7. Ejector stroke: 100 mm 8. Screw diameter: 32 mm (103 cm³) 9. Screw/barrel: W/C (hardened, high wear and corrosion resistance, up to 350 °C, 30% GF) 10. Nozzle: Standard open R19D4 Control & Software (FANUC 31i-B CNC) 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function Standard Machine Equipment Fpodszktkzopfx Aatel 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian)

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, Wendelmixer Diosna W401A - machine for 400 kg of dough - 2 speeds - control panel with program memory - 4 bowls - machine after refurbishment, in excellent condition - year of manufacture 2012 + Diosna HK1200 dough tipping device with drive and bowl scraper - complete with safety cage Fsdpfx Aoztz E Ejatspl - year of manufacture 2020

Condition: used, Year of construction: 2021, Year: 2021 Condition: good Counter: N/A Technical specifications: Fodpfozulidsx Aatopl - Maximum sheet size: 370 × 750 mm - Minimum sheet size: 210 × 210 mm - Paper weight: 120–400 g/m² - Maximum number of slits: 6 per sheet - Maximum number of cuts: 32 per sheet - Maximum number of creases: 16 per sheet - Minimum finished product size: 55 × 45 mm Main Features: - Automatic cutting, slitting and creasing in a single pass - CCD camera for precise print registration - Automatic print registration correction - Touchscreen control panel - Job memory for storing and recalling repeat jobs - Automatic sheet feeder - Ultrasonic double-sheet detection - Processing of digitally printed sheets without the need for die-cutting tools

Year of construction: 2017, condition: used, Safety control, safety door switch, switch buffer, bumper, safety contact buffer -Manufacturer: Haake, switch buffer - bumper Fpedpfofnln Hox Aatjl -Type: HSB 1112-10 -Voltage: 50 V AC, 75V DC -Price: per piece -Number: 2 pieces -Dimensions: 2830/180/H110 mm -Weight: 7.2 kg/piece

Condition: refurbished (used), functionality: fully functional, Year of construction: 2013, operating hours: 4,400 h, machine/vehicle number: PB8579, lifting height: 17,600 mm, overall weight: 2,530 kg, transport length: 5,500 mm, transport width: 140 mm, transport height: 200 mm, construction height: 2,000 mm, fuel type: hybrid, fuel tank capacity: 10 l, tire condition: 80 %, color: white, working height: 18,000 mm, Self-propelled crawler telescopic work platform with 18m working height, 9m lateral reach, in very good condition! Radio remote control, diesel and electric operation, fast and slow gear Automatic setting up/leveling of the 4 supports, good condition, completely overhauled, newly painted, charger for battery charging built into the device, including 2 batteries, very simple design, therefore very easy to service, Kubota diesel engine with slow (quieter operation) and fast gear All functions that are possible with diesel work just as well as electrical Power in the basket Water and air piping from the base to the basket. Slewing ring completely new!!!, hydraulic hoses replaced, accelerator for Kubota engine, speed controller, ball bearings for electric motor new, rubber buffer new, return filter, engine oil, fuel filter, air filter, complete platform repainted, ... last repair invoice for € 7,920.75 net carried out Fpsdpovktqlsfx Aatsl

Condition: used, mileage: 1,00,000 km, power: 75 kW (101.97 HP), first registration: 01/2020, fuel type: diesel, overall weight: 2,800 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, soot filter, Vehicle number (for inquiries): 149 MERCEDES-BENZ Vito 110 CDI EXTRA LONG Paint code: * 5389 Paint color: Steel Blue Interior * VY2 Tunja fabric: Black Equipment: * C447 SERIES 447 * CF0 Basic chassis * CL4 Multifunction steering wheel with trip computer * D50 Continuous partition * E07 Hill start assist * E34 Buffer battery for starting * ED4 12 V 92 Ah fleece battery Fpsdpfxjwciwwe Aatel * EL8 Two-way front speakers * EN6 Audio 10 with Bluetooth * EW6 Remote Services Plus preparation * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * EZ7 Active Parking Assist * F447 SERIES 447 * F66 Lockable glove compartment * F68 Heated and electrically adjustable exterior mirrors * FKA Panel Van * FY7 Multi-button remote control * GC9 6-speed manual transmission Fsg 350 * H12 Auxiliary hot water heater * HI1 Climate zone 1 (cold/comfort) * IB6 C447 Vito/V-Class series * IG4 Standard * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 EU/EFTA region * IL5 Left-hand drive * IN3 Wheelbase 3430 mm, long overhang * JH3 Communication module (LTE) for digital services * JK3 Instrument cluster with pixel matrix display * JW8 Attention Assist * JX2 Maintenance interval 40,000 km * KB6 Main tank 57 liters * KP6 SCR Generation 3 emissions control * L Left-hand drive * LC2 LED light strip in the cargo area * LE1 Adaptive Brake Light * LX5 Europe * M44 Alternator 14 V/185 A * MG9 Alternator Management * MJ8 ECO Start-Stop Function * MS1 Cruise Control * MT2 Emissions Class Euro 6D-TEMP N1 * MX0 BlueEFFICIENCY Package * MX4 Engine OM622 DE 17 LA 75 kW (102 hp) * R21 Wheel Size Group 1 * RF1 Tire Brand Continental (10) * RG1 Tires 205/65 R16 * RM0 All-Season Tires * RS3 Steel Wheels 6.5 J x 16 * S23 Two-Seater Passenger Seat * SA6 Passenger Airbag * SB1 Comfort Driver Seat * V43 Wooden Floor * VA2 Interior Trim for Cargo Area up to Roof Height (Wood) * VV9 Attachment Points in Roof Frame * W65 Tailgate * X99 Manufacturer: Mercedes-Benz AG * XC9 COC papers * XG6 weight variant: 2,800 kg * Z41 truck registration * ZM0 panel van Optional equipment: * Reinforced rear axle suspension (proof of proper modification) * Roof rails UP TO 36 MONTHS WARRANTY AVAILABLE. FINANCING AND TRADE-IN AVAILABLE. You can also find more vehicles on our website:

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, clearance between the columns: 480 mm, displacement volume: 247 cm³, injection pressure: 272 bar, injection weight: 107 g, mold height (min.): 150 mm, ejector force: 40 N, ejector stroke: 100 mm, plate width: 705 mm, plate height: 705 mm, total length: 5,037 mm, total width: 1,590 mm, total height: 1,850 mm, overall weight: 5,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF120 IU320 D=30 Fully electric IMM. Ejector, nozzle system, core pulls servo-hydraulically controlled. Clamping force 120T Tie bar spacing 480x480 Tool installation height 150 to 580 Robot interfaces Euromap 18 and Euromap 67 Warranty can be optionally extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Optional equipment: CE Maximum tool height increased to 580 mm Bimetallic plasticizing up to GF 30% Interface for conveyor belt Electric quick-change system for the cylinder with Harting interface 2 additional hydraulic core pulls with limit switches 2 air blow devices, permanently mounted on the stationary platen Dosing signal interface with HAN-3A connector Additional power supply: 220 V, 10 A, Schuko socket 20-mA interface for mold temperature controller One water distributor 4 × 2 on the rear of each platen with 3/8" connections 2 water distributor batteries with 4 lines each Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable input/output signals Centering rings on both platens according to Euromap 18 / 67 Standard equipment: Clamping unit · Clamping unit with automatic central lubrication · Clamping movements via proportional valve control · Hydraulically operated ejector plate · Tool protection · Variable adjustment of the clamping force possible · Ejector protection · Mechanical robot interface Euromap 18 · Footboard protection under the clamping unit from D1 1100 and larger · Precision leveling shims between machine frame and customer floor · Platens with threaded holes and T-slots, see technical data · Automatic central lubrication (with grease) · Ejector plate Injection unit · Hydraulic dual-cylinder injection · Thermally insulated plasticizing unit · 10-stage adjustment of the injection speed · (Control parameters: speed; pressure; position) · 10-stage adjustment of the holding force (Control parameters: speed; pressure; position) · 5-stage adjustment of the plasticizing speed · (Control parameters: speed; pressure; position) · Plasticization supported on linear guides · Hydraulic nozzle system · Cold start protection · Screw retraction function · Automatic shut-off · Measuring system for screw position Electrical system · Plasticizing heater via PID control · Manual, semi-automatic and fully automatic operation possible · Maintenance interface · Automatic alarm system with horn · Unlimited technical parameter memory · Automatic tool height adjustment · Emergency stop function · Online cycle analysis · 12" TFT touch operating panel · Visualized graphic program · PDP interface · Injection monitoring · Tool closing monitoring · SPC interface · IP54 standard · Screw speed measurement · 16-level password security · Euromap 12 · Automatic overheating protection Hydraulic system · Quiet servomotor hydraulic system · Energy-saving servomotor hydraulic system · High-performance servopump system · Back pressure control via proportional valves Fpjdpjzzn Hlofx Aatol · Oil preheating · Injection and tool closing monitoring · Automatic pressure and flow calibration · Oil temperature and oil level alarm

Condition: used, Year of construction: 1999, machine/vehicle number: LC652, Used KRONES filling line for beer - glass - 24000 BPHTechnical Specifications & Performance DataThis used bottling line is a second hand complete glass beer bottling line engineered for industrial packaging and beverage production. It is configured around a Krones Mecafill VK2V filling monoblock and complemented by bottle washing, pasteurization, labeling, and crate handling equipment. The line is optimized for glass beer bottles and delivers reliable output with precise control of product quality parameters.Rated capacity: 24,000 bottles/hour at 0.5LCompatible formats: 0.33L and 0.5L beer bottlesContainers: GlassFilling monoblock: Krones Mecafill VK2V 066-103/KK (1999), 66 filling valves, double air evacuation, integrated rinser with 60 heads (pressurized water) and 11 capping headsLabeling: Krones Prontomatic 720-18-86-130 (1999), cold glue, front/back/neck applicationBottle washers: Krones KES-1-1-190/19-80 (1998, retrofitted in 2013) and Robak PBSzPasteurizer: Fischer (1999) HTST module; nominal 130 hl/h, 5°C inlet, 72°C for 30 s (30 PU), 11°C outlet; buffer tank 6,000 LElectrical & utilities (pasteurization system): 3x400V, 50Hz; compressed air 6 bar (dry, oil-free)Additional Fischer heat-exchanger modules: EUROPA 40PI and DUBACAL 400P plate pack references (PS 16 bar; plate pack Cmax 780 mm, Cmin 770 mm)Advanced Automation & Control SystemsThe line integrates robust automation for consistent, repeatable performance in beverage production. The pasteurization system is automatically controlled with supervisory monitoring of all key process variables, enabling precise quality assurance at high throughput.Monitored parameters: pasteurization temperature, holding temperature, inlet/outlet temperature, temperature and pressure during pasteurization, flow volume, pasteurizing units (PU), buffer tank level, and filling pressure after buffer tankOperating modes: manual operation with automatic control for stability and safetyElectrical specifications: 3x400V, 50Hz (pasteurization system)Quick changeover between 0.33L and 0.5L formatsProduction Line Integration CapabilitiesThis complete bottling line is engineered for inline operation and smooth integration between washers, filling, pasteurization, labeling, and crate handling. It suits breweries seeking an industrial packaging solution for glass beer bottles with stable, high-speed performance.Integrated bottle washers upstream for returnable glass handlingHTST pasteurization between filling and labeling for microbiological stabilityCold-glue labeling with multiple label positions (front, back, neck)Crate washer and crate load/unload equipment for returnable logisticsMachine TypeManufacturer / Model Fpjdpfx Aeziyyyoatsl

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: CR2340 89/221260, Demag ELKE bridge crane, overhead crane, crane, crane system, crane runway Payload / lifting capacity: 3.2 - 3200 kg Track gauge: approx. 14,000 mm, overall width: approx. 14,200 mm With floor control and fine positioning Demag PLV168 wire rope hoist, 3200 kg Lifting height: 6 m Fedpfx Ajzf Uphsatopl Overall height from top of crane to hook: approx. 1100 mm Head beam length with buffer: approx. 220 cm Crane is dismantled and immediately available Good used condition We also have pillar-mounted jib cranes and wall-mounted jib cranes available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Pickup is preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: CR2431 90-240381, Demag ELKE bridge crane, overhead crane, crane, crane gantry, crane runway Load capacity / lever load: 3.2 - 3200 kg Gauge: approx. 12,200 m, overall width: approx. 12,400 mm with floor control and fine positioning Demag DH hoist 3200 kg Lifting height: 6 m Overall height from top of crane to hook: approx. 1050 mm Head beam length with buffer: approx. 220 cm Crane is disassembled and immediately available. Good used condition. Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Fpsdpfx Aezf Upboatsl Shipping by freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 2,600 h, controller model: Fanuc 32 C, control type: CNC control, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Magnetic chuck 400 x 200 Fpjdpew I Tt Sefx Aatel 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Nominal force: 500 kN (50 tons) Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Fsdpozh Nnwjfx Aatjpl Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling BSV 75T DOUBLE SERVO FEEDER Type: tandem dual-feed servo unit, independently controlled tracks Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,000 mm, Equipment: documentation/manual, SEPRO Success 11C (2023) Linear cartesian robot , 1500mm Number of axis: 3 X = 1500 mm Y= 500 mm Z= 1000 mm Payload: 5 kg Euromap 67 More information in photos of this robot, complete manuals available. SEPRO SUCCESS 11 – Technical Data (Summary) Robot type: Success 11 Serial number: R009519 Mechanics 1. Payload: 5 kg 2. Robot weight: 204 kg 3. Robot dimensions: 2430 × 1200 × 1570 mm 4. Max. pneumatic pressure: 7 bar 5. Air consumption: 140 l/min (normal), 260 l/min (peak) Stroke axes X-axis (horizontal stroke): 1. Stroke: 1500 mm 2. Speed: 2.0 m/s 3. Repeatability: ±0.1 mm Y-axis (horizontal take-out): Fsdpfxex Dnc Se Aatspl 1. Stroke: 500 mm 2. Speed: 2.0 m/s 3. Repeatability: ±0.1 mm Z-axis (vertical): 1. Stroke: 1000 mm 2. Speed: 3.0 m/s 3. Repeatability: ±0.1 mm Rotations 1. R1 pneumatic rotation: 0–90° 2. R3 pneumatic rotation: 0–180° or 0–90° Control system – Visual 2 1. Weight: 43.5 kg 2. Dimensions: 550 × 400 × 295 mm 3. Power supply: 3×400–480 V ±10% 4. CPU: i.MX537 / Cortex A8 @ 800 MHz 5. Memory: 512 MB DDR + 512 MB Flash 6. SD card: 4 GB 7. I/O: 8. Robot: 16 inputs / 16 outputs 9. Cabinet: 7 inputs / 8 outputs 10. USB ports: 1× Master USB, 1× Slave USB 11. Ethernet 10/100 Pneumatics 1. 2 pneumatic circuits 2. Vacuum and pressure functions available Environmental conditions 1. Operating temperature: +5 to +40 °C 2. Storage temperature: –25 to +55 °C 3. Humidity: 30–95% (non-condensing) 4. Protection rating: IP22 / IK07 Options 1. PC Editor (Windows XP to Windows 7) 2. Conveyor control (3×42V AC to 3×550V AC) 3. Safety kit for access door 4. 1× conveyor

Year of construction: 2016, condition: excellent (used), Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration test system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. Displacement Continuous (deflection) 51 mm Max. Displacement at shock 51 mm Max. Vibration velocity (sine) 1.8 m/s Max. Acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without payload 2,250 (Hz ± 5%) Max. static payload weight 500 kg Axial frequency of the vibration isolation < 5 Hz Flux density < 1 mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency > 90% - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 2 to 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (without grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Design with ground-isolated ground to avoid ground loop problems Scope of delivery: (See picture) Condition: Used Signs of wear and tear due to age and use Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone. Fpodjzu Nxijpfx Aatsl

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Fedopvlf Sepfx Aatspl Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: excellent (used), The device performed only 140 measurements. NITON XL3t 980 GOLDD+ – a portable X-ray analyzer with a next-generation SDD detector featuring GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral databases for alloys enables the identification of stainless steels, tool steels, chromium-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, and zinc, zirconium, and aluminum alloys. The analyzer provides very fast measurement. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys such as: cast alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: all iron-based alloys (0.00x% – 100%) and non-ferrous metal-based alloys (0.00x% – 100%) and rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x%-100%). The NITON XL3t 980 GOLDD+ analyzer operates based on BASIC PARAMETERS, meaning that it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: Fpedpfxezlccis Aatsl an identification program that assigns a name, symbol, number, etc., to a known sample, and such samples will be identified by that name. a program for quantitative chemical analysis (SuperChem Teach Mode) – based on its own standards, we create our own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch-screen display. The screen is color and tiltable, which facilitates reading the results during field work. It includes an integrated scanner and backlit alphanumeric sample identification codes. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two interchangeable batteries. One battery enables continuous operation for 8-10 hours without the need to recharge. It has two libraries, 900 and 800.

Condition: good (used), Horizon VAC-100a + VAC-100c + SPF-20A + FC-20A Booklet Maker Machine setup is via the control panel. Made in Japan. The line consists of: – Horizon VAC-100A / VAC-100M Max size: 350x500mm Min size: 120x148mm Fjdszyz D Uspfx Aatjpl Vacuum feeding 10 shelves Stack height: 55mm Basic weight: 40-270g 230V power supply Weight: 310kg/piece Touchscreen control Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Horizon SPF-20A Max size: 500x350mm Min size: 120x180mm Wire stitching Folding Two Hohner heads Horizon FC-20 Cutting thickness: 88 sheets 230V power supply Weight: 240kg Touchscreen control panel for quick format changes. With a single click, you can retool the machine for a different format. 230V power supply Weight: 490kg The machine includes: delivery, PJ-77R jogging machine, operating tools, additional components, and documentation.

Condition: used, Filling and weighing line: “Ishida” Multihead weigher Type CCW-EZ-214/30 Heads: 14 pieces max 50 programs (0-49) Performance: up to max 99 weighings/min Accuracy: average 0 to + 1.0 g Weighing volume: 50-3000 g Display: micro controller display Ambient temperature: 0°C - 40°C Humidity: 35-85% (no condensation) Smallest setting: 0.1g + Vertical flowpackaging line “Rovema” Type VPK260 - 14961 yoc 2005 Performance (mech.) Cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Fpedjzwdfcjpfx Aatel Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -20 … +50 Air humidity (max.) (%): 15…95; no condensation in good condition

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass Fpodpexmrwfsfx Aatjl ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Fpjdpfxew Hpzws Aatol Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Condition: used, mileage: 1,73,008 km, power: 100 kW (135.96 HP), first registration: 03/2022, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 03/2028, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number (for inquiries): 52 Mercedes-Benz VITO 114 LANG 9G-TRONIC 4x4 Paint code: Paint color Arctic White MB 9147 Interior: * VF4 Fabric Caluma black Equipment: * 219L Hamburg * 9147 Paint color Arctic White MB 9147 * A1O Rear axle shaft manufacturer IFA * BB7 CO2-optimized braking system * BH1 Hold function * C447 - * C70 Pedestrian protection * CF0 Standard suspension * CL1 Steering wheel adjustable in inclination and height * CL4 Multifunction steering wheel with trip computer * D51 Partition wall, continuous, with window * E07 Hill-start assist * E1D Digital radio (DAB) * E2R Radio generation 2 * E34 Buffer battery for starting * EA4 Audio 40 * ED4 Fleece battery 12 V 92 Ah * EL8 Two-way speakers front * EW6 Pre-installation for Remote Services Plus * EY2 Pre-installation for Live Traffic Information * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * EZ5 Parking package * EZ8 PARKTRONIC * F447 - * F61 Interior mirror * F68 Exterior mirrors, heated and electrically adjustable * FF1 Center console with storage compartment * FKA Panel van * FR1 Rear camera, not folding * FR8 Rear view camera * FY7 Multi-button remote control * G43 9G-Tronic * H16 Seat heating for driver * H20 Heat-insulating glass all around * HH9 Semi-automatic controlled air conditioning system Tempmatic * HI1 Climate zone 1 (cold/comfort) * I52 HU Map Data Country Set 3 * IB6 Model series C447 Vito/V-Class * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 Region EU/EFTA * IL5 Left-hand drive * IN2 Wheelbase 3200 mm, long overhang * J55 Seat belt warning system for passenger seat * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JK3 Instrument cluster with pixel matrix display * JW8 Attention Assist * JX2 Service interval 40,000 km * KB5 Main tank 70 liters * KP7 Exhaust aftertreatment SCR Generation 4 * L Left-hand drive * L16 Fog lights halogen * LA2 Headlamp Assist * LC2 LED light strip in the cargo area * LC4 Comfort roof control panel * LE1 Adaptive brake light * LX5 Europe * M40 Generator 14V/200A * MG9 Generator management * MJ8 ECO Start-Stop function * MK8 Speed limiter 210 km/h * MS1 Cruise control * MT6 Emission class Euro 6D N1 * MU2 Engine OM654 DE 20 LA 100 kW (136 hp) * MX0 BlueEFFICIENCY package * R21 Wheel size group 1 * RF1 Tire manufacturer Continental (10) * RG7 Tires 225/55 R17 * RM1 M + S tires * RS7 Steel wheels 6.5 J x 17 * S00 Airbag control unit generation AB12 * SB1 Driver's seat comfort * SB2 Passenger seat comfort * SE5 Lumbar support for driver's seat * SW3 Deletion of airbag, passenger side * V20 Interior paneling, cargo area, panels above * V30 Side wall interior paneling in cargo/passenger compartment * V43 Wooden floor * VF4 Fabric Caluma black * VV9 Fastening points in the roof frame * W65 Tailgate * W70 Tinted glass in the rear, black * W78 Window in tailgate/rear door with wiper and washer system Fsdpfozzuu Nsx Aatopl * WM0 Control code model update * X30 Vehicle registration certificate part 2 * X99 Manufacturer Mercedes-Benz AG * XC9 COC documents * XG6 Weight variant 2,800 kg * XM0 Model update * XM8 Control code development * XN1 Model year G1-II * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signage/printed materials German * XW9

Condition: used, mileage: 1,73,008 km, power: 100 kW (135.96 HP), first registration: 03/2022, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 03/2028, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number (for inquiries): 52 Mercedes-Benz VITO 114 LANG 9G-TRONIC 4x4 Paint code: Paint color Arctic White MB 9147 Interior: * VF4 Fabric Caluma black Equipment: * 219L Hamburg * 9147 Paint color Arctic White MB 9147 * A1O Rear axle shaft manufacturer IFA * BB7 CO2-optimized braking system * BH1 Hold function * C447 - * C70 Pedestrian protection * CF0 Basic chassis * CL1 Steering wheel adjustable in inclination and height * CL4 Multifunction steering wheel with trip computer * D51 Fixed partition with window * E07 Hill start assist * E1D Digital radio (DAB) * E2R Radio generation 2 * E34 Buffer battery for starting process * EA4 Audio 40 * ED4 Fleece battery 12 V 92 Ah * EL8 Two-way speakers front * EW6 Pre-installation Remote Services Plus * EY2 Pre-installation for Live Traffic Information * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * EZ5 Parking package * EZ8 PARKTRONIC * F447 - * F61 Interior mirror * F68 Exterior mirrors, heated and electrically adjustable * FF1 Center console with storage compartment * FKA Panel van * FR1 Rear camera, non-folding * FR8 Reversing camera * FY7 Multi-button remote control * G43 9G-Tronic * H16 Seat heating for driver * H20 Heat-insulating glass all around * HH9 Semi-automatic climate control system Tempmatic * HI1 Climate zone 1 (cold/comfort) * I52 HU Map Data Country Set 3 * IB6 Model series C447 Vito/V-Class * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 Region EU/EFTA * IL5 Left-hand drive * IN2 Wheelbase 3200 mm, long overhang * J55 Seatbelt warning for passenger seat * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JK3 Instrument cluster with pixel-matrix display * JW8 Attention Assist * JX2 Maintenance interval 40,000 km * KB5 Main tank 70 liters * KP7 Exhaust gas purification SCR Generation 4 * L Left-hand drive * L16 Fog lamps halogen * LA2 Headlamp Assist * LC2 LED light strip in the cargo area * LC4 Comfort roof control unit * LE1 Adaptive brake light * LX5 Europe * M40 Generator 14V/200A * MG9 Generator management * MJ8 ECO Start-Stop function * MK8 Speed limiter 210 km/h * MS1 Cruise control * MT6 Emission class Euro 6D N1 * MU2 Engine OM654 DE 20 LA 100 kW (136 PS) * MX0 BlueEFFICIENCY package * R21 Wheel size group 1 * RF1 Tire manufacturer Continental (10) * RG7 Tires 225/55 R17 * RM1 M + S tires * RS7 Steel wheels 6.5 J x 17 * S00 Airbag control unit Generation AB12 * SB1 Driver seat Comfort * SB2 Passenger seat Comfort * SE5 Lumbar support for driver's seat * SW3 Airbag passenger deleted * V20 Interior lining cargo area panels top * V30 Side wall interior lining in cargo/passenger compartment * V43 Wooden floor * VF4 Fabric Caluma black * VV9 Attachment points in the roof frame * W65 Tailgate * W70 Tinted glass in the rear, black glass * W78 Window in tailgate/rear door with wiper and washer system * WM0 Control code model upgrade Fpjdezzuvaepfx Aatel * X30 Vehicle registration certificate part 2 * X99 Manufacturer Mercedes-Benz AG * XC9 COC documents * XG6 Weight variant 2,800 kg * XM0 Model upgrade * XM8 Control code development * XN1 Model year G1-II * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signage/printed materials German * XW9

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Industrial automated COMATEC Solids Big Bag receiving, handling, opening and discharge station for dry bulk solids. The system was designed to reduce manual handling of the bags. The operator places the full Big Bag in the loading area and attaches its lifting loops to the lifting crossbeam. The subsequent lifting, travel and positioning operations are carried out automatically by programmable electric hoists. The installation incorporates a double gantry-type supporting structure equipped with two VICINAY electric wire-rope hoists, each with a lifting capacity of 1,600 kg. The hoists are fitted with electric travelling trolleys and numerically controlled positioning. Each hoist has a 3 kW lifting motor and a 0.55 kW travelling motor, with an approximate lifting speed range of 1.8 to 14.5 m/min. Once positioned above the receiving station, the Big Bag is opened from the bottom by means of a removable and replaceable knife system, allowing rapid product discharge. The material then passes through a COMATEC DRG-300 lump breaker, a K-900-DC circular vibrating screener and a 2,000-litre buffer hopper. From the hopper, the product is metered by means of a tubular screw feeder. The system was originally designed for handling PTA powder, with an apparent bulk density of approximately 0.9-1 kg/dm³. It may also be suitable for other dry powders or granular products, subject to verification of product compatibility, material construction, ATEX classification and the required filtration and discharge arrangements. Main components • Double gantry structure for Big Bag handling. • Two VICINAY 1.6 t electric hoists. • Electrically driven travelling trolleys. Fsdpfxszvc Due Aatopl • Programmable automatic positioning. • Big Bag lifting crossbeams. • Removable knife system for rapid bag opening. • COMATEC DRG-300 lump breaker. • K-900-DC circular vibrating screener. • 2,000-litre buffer hopper. • Tubular screw feeder. • Maintenance platform with open-grid flooring and safety railings. • Level instrumentation. • Associated pneumatic and electrical components. • Carbon-steel support structure.

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,650 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: FANUC, controller model: 0i-MF Plus 10,4", total height: 3,438 mm, total length: 4,400 mm, total width: 3,900 mm, table width: 800 mm, table length: 1,700 mm, overall weight: 13,000 kg, spindle speed (max.): 1,200 rpm, coolant supply: 30 bar, distance table center to spindle nose: 920 mm, spindle motor power: 25,000 W, spindle nose: ISO 40 (DIN 69871), number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, New vertical machining centre equipped with a FANUC 0i-MF Plus control, 10.4" display, including Manual Guide I and AICC II. Table measuring 1,700 × 800 mm with a permissible load of 2,000 kg/m². Axis travels of 1,650 mm in X, 800 mm in Y and 800 mm in Z. Table-to-spindle-nose distance from 120 to 920 mm; spindle centre to column 882 mm. Cutting feed of 1 to 15 m/min, with rapid traverse rates of 36 m/min on the X and Y axes and 24 m/min on the Z axis. Direct-drive DDS spindle with ceramic bearings, 7/24 steep taper ISO 40 to DIN 69871, 12,000 rpm and a power rating of 15 to 25 kW. All three axes run on roller-type linear guideways (PMI, Taiwan) with preloaded ball screws. Swing-arm automatic tool changer with 24 stations, accepting tools up to 80 mm in diameter, 300 mm in length and 8 kg in weight. Through-spindle internal coolant supply at 30 bar with filtration unit, oil/coolant separator, hinged-belt chip conveyor combined with two screw-type chip augers, and a rear chip flushing system with coolant gun. Fully enclosed splash guarding with interlocked front door, spindle oil chiller, heat exchanger, automatic centralised lubrication and air-conditioned electrical cabinet. Rigid tapping cycle, eight open M-functions, data server with Ethernet connection and 2 GB memory card. Three-colour signal light, dustproof electrical system, spindle air seal and levelling bolts with pads. Machine supplied without counterweight. Power supply via a 400 V / 50 Hz three-phase transformer rated at 30 kVA; compressed air requirement 6 to 8 bar. Overall dimensions 4,400 × 3,900 × 3,438 mm, extending to 5,500 mm in length with the chip conveyor fitted. Machine weight 13,000 kg. CE certified. Fsdpfszw Ex Dsx Aatspl