Used Boiler Tube for sale (3,087)

Year of construction: 2006, Condition: excellent (used), Highpressure gas vessels, gasvessels hydrogen, helium, He, H2, CNG, methane, tube trailer. Dntjhp Volume: 18m3 Pressure: 150 bar We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels. To discuss the possibilities, please contact us by phone or e-mail.

Condition: used, Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 Driven Sizing # 2 Pass N. 28 Driven Sizing # 3 NDT Prueftechnik Pass N. 29 Driven Sizing # 4 Pass N. 30 Driven Sizing # 5 STRAIGHTENING AND SQUARING SECTION Pass N. 31 Idle Turkshead #1 Roll holder plates NOT available Pass N. 32 Idle Turkshead #2 Roll holder plates NOT available Pass N. 33 Idle Turkshead #3 Roll holder plates NOT available Pass N. 34 Idle Turkshead #4 Roll holder plates NOT available Tables and tools for rolls change ABB Motors Fheeixwer Costamasnaga Reducers Centralized lubrication system Hydraulic Power Unit Complete Mill Portion Automation with diagrams (OTO MILLS/Elletre 2013) Complete hydralic system Fume and Vapors exhaust system with extraction hoods (EUROFILTER) Complete Zinc exhaust system (DONALDSON)

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, pressure: 11.1 bar, operating pressure: 6 bar, temperature: 102 °C, TECHNICAL DETAILS Design: three-pass design for low-NOx operation Installation: inside Altitude: 400 m Feed water reference temperature: 102 °C Gross steam output: max. 820 kg/h Nominal boiler output: 530 kW Operating pressure: max. 6 bar Test pressure: 11.1 bar Operating pressure: approx. 3 bar Exhaust gas loss with Eco Gas/Oil: max. 7.4/6.8 mbar Exhaust gas temperature after Eco: 119 °C Boiler efficiency with Eco: 95.2% Contents Total water volume: 3.25 m³ Water volume up to NW with Eco 200: 2.50 m³ Average working range: 2.47 m³ Steam water volume: 0.70 m³ 3Wktdmciq Feed water volume: 2.45 m³ MACHINE DETAILS Mains voltage: 3 x 400 V 50 Hz Boiler length: 3,640 mm Boiler width: approx. 1,700 mm Boiler height (incl. Eco 200): 3,760 mm Flame tube diameter: 556 mm Flame tube length: 2,100 mm Weights Transport weight: approx. 3.5 t Operating weight (pressure test): approx. 6.75 t Nominal connection diameters on the boiler Main steam: DN/PN 80/16 Safety valve: DN/PN 25/40 Feed water: DN/PN 25/40 Blowdown: DN/PN 25/40 Ventilation: DN/PN 15/40 Flue gas connection outside/inside: DN/PN 224/216

Year of construction: 2007, Condition: good (used), machine/vehicle number: 05 39 29213U, We sell 4 identical units of used radiant tube heaters. Its radiant heat warms people, concrete floors and objects. The heat is absorbed and re-radiated to warm the entire area through convection. This, combined with the fact that it is powered by gas, adds up to one unbeatable combination. Fuel – natural gas or propane. Minimum Mounting Height between 3 and 5 meters, Ignition type: Electronic Direct Spark Ignition. Supply Voltage: 250 V, Gas Connection: 1/2″ MPT (Male), Gas pressure G20 with 20 m bar, 50 Hz, Dimensions: length approx. 9.040 mm Whether you need to heat your garage, workshop, or other hard-to-heat spaces, provides both the fuel efficiency of radiant heat These units are already dismantled. . Price 1.900 Euro + VAT negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / B8Fctcdg98 Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 110 h, pipe length: 4,000 mm, Free-form bending machine J.Neu GmbH NFB 030S-4000 6-32mm Year of construction: 2020 only approx. 110 operating hours 5 axes CNC-controlled simultaneous control Mitsubishi 750 Min. tube diameter: 6 mm Cgqewofidg Max. pipe diameter: 32 mm max. tube length 4000 mm INCLUDES 1 tool set 32 mm max. Max. feed speed 300 mm/sec Mandrel bending device with manual adjustment for NFB030S-4000 with mandrel lubrication Stainless steel oil pan with grids 2200x1400x4mm Additional tool sets for NFB030S-4000 consisting of movable tool coated steel insert Fixed tool with coated inserts tool holder tube holder feed rod 22,x2,5mm

Condition: used, Used Viessmann type Vitoplex 200 hot water boiler. Heating capacity rated 900kw at 6 bar pressure with maximum 100 deg.c. Includes Oilon model GP-90 M biogas burner. Includes various heat exchanger, pumps, values & instrumentation all housed in Energytech container. Has double membrane type Tecon Biogas 215 gas holder. 78Trqutza Approximate capacity 660cumt with an operating pressure at 33mbar.

Condition: repair required (used), Functionality: not functional, Manufacturer: Miic B7O8Evq023 The machine does not work. Program error! Voltage: 110 V !!!

Condition: new, Year of construction: 2024, pipe diameter: 76 mm, warranty duration: 12 months, power: 3 kW (4.08 HP), COUNTRY OF ORIGIN : TURKEY WARRANTY PERIOD :12 MONTHS Standard Hardware Self-memorizing NC Control display ensures professional and easy operation of the machine Pipe bending up to Ø 76mm x 3 mm The holder bracket supports the pipe when fixing it to the machine Blank holes for mounting special attachments Steel construction welded body Thermal - Power & Reset lamps Emergency stop button The machine has 500 internal program memory The minimum bending radius is 2 times the diameter (Ø) of the pipe (depending on the wall thickness of the pipe and the material) Dquijj Ø 33.7 mm Standard 1 Set Pipe mold included User manual MODEL NBM 76 Minimum Diameter mm 80 Maximum Diameter mm 440 Operating Speed m/an> 7 Engine Power kW 4 Weight kg 260 Dimensions (L x W x H) 850 x 850 x 1050 Curling Capacity NBM 76 Thick Wall Tubes mm 76×3 Black Steel Pipe mm 70×5 Aluminum Pipe mm 76×6 Round solid tube (black steel) mm 45 Square tube (black steel) mm 50x50x5

Condition: used, Already disassembled/dismantled. Czu97Bc3Qg

Condition: excellent (used), Year of construction: 2006, Operating hours: approx. 40,100 hours Vj9Kofuow Laser tube (replaced at the end of 2021): approx. 4,100 hours

Condition: used, Demonstration machine, slight signs of use and paint defects Broywe8Qumg

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Dq07T2 Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 1999, Manufacturer BLACKHEAT BH 50 year of production: 1997-2002 heat output: 45kw gas type: G20 nozzle diameter: 6mm nozzle pressure 8.7mbar pipe length: 9-12 meters p connection: 360mbar Bdxa3Bwtc7H Connection voltage: Max. current consumption: IP30 AC 230V 50Hz

Condition: new, Year of construction: 2024, pipe diameter: 60 mm, operating speed: 45,000 mm/s, warranty duration: 12 months, power: 2.2 kW (2.99 HP), COUNTRY OF ORIGIN : TURKEY WARRANTY PERIOD : 12 AY Standard Hardware Self-memorizing NC Control display ensures professional and easy operation of the machine Pipe bending up to Ø 60mm x 4 mm The holder bracket supports the pipe when fixing it to the machine Blank holes for mounting special attachments Steel construction welded body Thermal - Power & Reset lamps Emergency stop button Dquii9 The machine has 500 internal program memory The minimum bending radius is 3 times the diameter (Ø) of the pipe (depending on the wall thickness of the pipe and the material) Ø 33.7 mm Standard 1 Set Pipe mold included User manual MODEL NBM 60 Minimum Diameter mm 80 Maximum Diameter mm 320 Operating Speed m/sec. 3 Engine Power kW 2 Weight kg 250 Dimensions (L x W x H) 750 x 850 x 1050 Curling Capacity NBM 60 Thick Wall Pipes mm 60×4 Black Steel Pipe mm 48×4 Aluminum Pipe mm 60×8 Round solid tube (black steel) mm 40 Square tube (black steel) mm 40x40x4

Condition: good (used), Year of construction: 2014, operating hours: 29,500 h, Mazak 3D FABRI GEAR 400 II pipe laser Manufacturer: Mazak C0Kb00Vbjy Type: 3D FABRI GEAR 400 II Year of manufacture: 2014 Condition: used, good, daily in use Operating hours: 29.500h Laser power: 4KW CNC control Mazak FX 3D cutting head for processing tubes/profiles/free-form parts 8m loading and unloading for processing profiles/pipes up to 8m long Max. Workpiece lengths:8000mm Max. Diameter round: 406.4mm Max. Diameter square: 300x300mm Max. Cutting capacity 90°: - FE up to 20mm - VA up to 10mm - ALU up to 8mm

Year of construction: 2010, Condition: ready for operation (used), Additional Equipment 8.5 meter automatic bundle loader input at the rear, manual loading at the front 6.5 meter output length Filter installation 3D cutting head 8Knvinox3 This BLM Adige LT8 tube cutting machine was manufactured in 2010. It is ideal for precise and efficient cutting tasks. Consider the opportunity to buy this BLM Adige LT8 tube cutting machine. Contact us for more information. Application Types Cutting

Condition: used, Grinds all major materials Easy operation, rotating design Grinds at any angle form 30° to 90° Grinds any diameter from Ø 20 to Ø 76 mm Suitable for tubes and profiles Cx03Cwz9 Powerful 3 kW motor Incl. 2 K36 grinding belts 100 x 2000 mm

Condition: used, Heat exchanger, shell and tube heat exchanger FUNKE Safety heat exchanger for hydraulic systems with system separation Type SWF 301-6-B13-4 Serial no. 659839 Drawing no. 748 924 0850 Year of construction 2011 Operating pressure max. shell space 16 bar Pipe chamber 10 bar Safety chamber 16 bar Jacket volume = 1.2 liters Pipe chamber = 0.7 liters Safety chamber = 0.3 liters Temperature max. 100°C Jacket pipe Ø 80 mm - Leakage indicator via ALCO pressure switch - 2 pipe fittings on the jacket pipe M30 x 2 mm thread for 22 mm pipe outer diameter (hydraulic oil) - 2 pipe fittings on the cover 3/4" (cooling water) St7Egjbr Dimensions L x W x H: 580 x 220 x 130 mm Weight: 16 kg good condition

Condition: excellent (used), Year of construction: 2004, overall weight: 3,500 kg, pressure: 6 bar, heating capacity: 140 kW (190.35 HP), temperature: 120 °C, tank capacity: 2,040 l, gas connection: g20, frequency: 50 Hz, Equipment: hot water, Viessmann VITOPLEX SX1 1400kw gas boiler, boiler with WEISHAUPT G30/2A gas burner Manufacturer: Viessmann VITOPLEX SX1 Year of manufacture: 2004 nominal heat output: 1400Kw boiler water capacity: 2040 liters Max. water pressure in the heating circuit: 6 bar Efficiency: 94% heating circuit water temperature max: 120°C nominal voltage: 230v 50Hz 6A boiler controller: Vitotronic 100 chimney pipe diameter: 390mm Sizes: length: 2900mm width: 1800mm height: 2300mm weight: approx. 3000 kg Gas burner: Weishaupt G30/2A complete assembly. design: ZM-LN year of manufacture: 2003 heat output: min 300- max 1800kw connection pressure: min 15- max 500 Mbar Ccn83T8Nlm gas type: natural gas gas control valve: DUNGS DMV-D 5065/11 pressure switch: Dungs LGW 50 A2P Siemens SQM10.16532 actuator Leakage tester Dungs VPS-504 S04 with stuffing box Tightness checker Dungs VPS-504 S04 Electrical power: 5.95 kw control voltage: 230v 50Hz 1 phase mains voltage: 400v 50Hz 3 phases

Condition: used, Demonstration machine, slight signs of use and paint defects Bf2Mlgctpnb

Condition: used, Year of construction: 2020, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, frequency: 50 Hz, Zenith 46kw dark radiator 12-15 meter black radiator Cqpgzi2Cde ZENIT-46/L dark radiator 15m long for sale in mint condition. complete unit with heat-reflecting shade, spacers, hangers, chimney if required make PAKOLE Zenit 46/L year of manufacture: 2020 heat output: 46kw pipe length: 12-15 meters p connection: 360mbar Connection voltage: Max. current consumption: IP21 AC 230V 50Hz

Condition: new, The EM pipe and profile deburring machines are the ideal addition to any cold circular saw, shear, notching or profile end processing machine. A sturdy wire brush can be used to remove chips and burrs that have not been completely loosened. The cutting edge itself remains unchanged. Ideal for every workshop with tube processing in trade and industry. T2Kbhgf

Condition: new, Mobile tube bender with manual hydraulic pump for bending steel tubes larger diameters. Bending is done via dies that come in commonly used tube dimensions allowing bends up to 90°. Appropriate attachments for various diameters are included. Brvkjrjapw0

Condition: new, The profile bending machines of the KPB series combine high bending performance with modern mechanical engineering and powerful hydraulics. You can bend medium and heavy steel profiles with great precision. A high drive power and the hydraulically adjustable bending rollers make the entire profile bending machine series a powerful solution for metal construction, locksmithing and general mechanical engineering. These machines are also used in the production of canopies, greenhouses, advertising technology and the furniture industry. Dllenj

Condition: new, The profile and tube bending machine KPB 30 can be used for arching, circular and spiral bending. This makes it ideal for locksmiths and metal construction who specialize in the repair and individual production of fences, furniture, roofs and railings. Set the bending radius manually and you can bend many different profile geometries with the universal rollers. This model can be set up either vertically or horizontally and the left and right rotation can be selected using the foot pedal. Dlkbo2