Used Butterfly Valve Pneumatic Actuator for sale (12,756)

Condition: like new (used), Spirax Sarco BSA2T Bellows Sealed Shut-off Valve DN200 PN25 NOS Unused Spirax Sarco bellows sealed shut-off valve from stock. High-quality industrial design for steam, condensate and process media. Includes counter flanges. Manufacturer: Spirax Sarco Type: BSA2T Valve Type: Bellows Sealed Shut-off Valve Pjdezb Rdhspfx Alhsgn Nominal Size: DN200 Nominal Pressure: PN25 Series: BSA2T Design: Bellows Sealed Valve Seal Type: Bellows Seal Connection: Flange Pressure Stage: PN25 Maximum Operating Pressure: 25 bar(g) Maximum Temperature: 350 °C Body Material: Spheroidal Graphite Cast Iron SG Designation: EN-JS 1025 Flow Direction: indicated Handwheel Operation: Yes Counter Flanges: included Country of Manufacture: United Kingdom Condition: NOS New Old Stock

Year of construction: 2021, condition: like new (used), APV SPX SW44 Diverter Valve DN65 2.5" with Control Unit CU41 High-quality, hygienic diverter valve from the APV SW4 series for applications in the food, beverage, dairy, pharmaceutical, and process industries. Equipped with pneumatic drive and integrated control unit CU41. Manufacturer: APV SPX Flow Series: SW4 Type: SW44 Valve type: Diverter valve Nominal size: DN65 Connection size: 2.5" Design: NO (Normally Open) Control Unit: CU41 Psdpszb Nurefx Alhsgn Actuation: pneumatic Material of product-contact parts: Stainless steel 1.4404 Valve stroke: 25 mm Kvs value: 185 m³/h Year of manufacture: 07/2021 Made in EU Condition: Like new Location: Kusel

Condition: excellent (used), functionality: fully functional, pressing force: 3 t, Force 32 kN, stroke 100 mm Podpfjzfy Trjx Alhegn

Condition: new, AUMA 07.1-F10 Multi-turn actuator New -Auftragsnr: 23078028 -NR: 2218NS66675 -PTB 01 ATEX 1119 -SKE0 56-2/80 Podjv Uaicjpfx Alhegn -Art nr: Z048.703 - AZ F-3-S-ISO-STD

Year of construction: 2001, condition: good (used), Top closing stapler with clamping anvils. For coil staples. Closing of filled folding boxes made of single and double corrugated cardboard. Economical closing of corrugated cardboard boxes with joining and overlapping of flaps with clamping anvils. Suitable for single and double corrugated cardboard. Adjustable penetration depth to suit the type of carton. Ideally suited for use in packaging lines where a high degree of accessibility and efficiency must be ensured. - Housing made of hardened steel for long life. - Clamping anvils return immediately: up to 20 staple cycles/minute - 1,000 staples per coil: up to 10 times less frequent reloading compared to ordinary staplers For convenient operation, use a balancer in combination with a rotary arm system and a suitable spiral hose. See > accessories. MEROLOCK pneumatic stapler - For CR 1/34 spiral staples, arm length 18 mm, - with sound suppressor Pgjdpsva Nq Hofx Alhsn - With automatic return of the crimping anvil. - The clamping anvils are specially hardened to extend their life.

Condition: excellent (used), I will sell a spreader, a Lukas double-piston column cylinder. Pgodpfev Dx Ntjx Alhjn - LZR 12/300 - LZR 12/700 EN - Very good condition. - Price given for the LZR12/300 cylinder- 450€

Condition: new, VARIOUS GATE VALVES A LOT OF VARIETY Pgjdjurk T Nspfx Alhsn BRAND NEW

Condition: used, We are offering this used GESIPA FireFox 2 F axial pneumatic-hydraulic riveting tool, year of manufacture unknown, for sale. Podpfozfg Suex Alhogn Manufacturer: Gesipa Blindniettechnik GmbH & Co. KG Type: FireFox 2 F axial Maximum operating pressure: 6.0 bar Serial number: If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, functionality: fully functional, We are offering this used GESIPA FireFox 2, pneumatically and hydraulically powered, with an unknown year of manufacture. Manufacturer: GESIPA Model: FireFox 2 Drive type: pneumatically and hydraulically powered Pgodezfg Ngspfx Alhen If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale: EFCO Maschinenbau PS 15 Valve Testing Bench. Pedpfjy R N A Asx Alhjgn The bench is pre-owned and in excellent working condition. It is currently connected and can be inspected and tested on-site. EFCO PS series test stands are designed for pressure and tightness tests on various types of valves. Suitable for testing shut-off, control, and safety valves. Specification: Model: EFCO PS 15 Vertical Test Bench Clamping Force: 15 t Suitable for testing: Shut-off valves, control valves, safety valves Working Range: DN 50–600 DN 2″–24″ The working range can be extended using external testing Test Pressure: Water up to 1380 bar (20000 psi) Air / nitrogen up to 300 bar (4350 psi) Quick specimen clamping Convenient and safe operation Robust industrial frame More information: EFCO PS 15 Professional German equipment suitable for repair workshops, energy, oil, gas, and industrial companies. If you have any further questions, we will be glad to assist you.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, machine/vehicle number: L030748, overall weight: 2 kg, warranty duration: 3 months, pressure: 7 bar, The Scell-it® E-312NP pneumatic riveting tool for self-clinching nuts offers reliability, precision, and functionality, making the installation of self-clinching nuts quick and easy. Below, we provide additional information regarding the replacement of the nose/mandrel, stroke adjustment, and self-clinching nut installation, to enable you to fully utilize the potential of this tool. Nose/Mandrel Replacement: Detailed instructions for replacing the nose and mandrel can be found in our comprehensive operating manual. If you intend to use self-clinching nuts of different diameters, it will be necessary to change the nose, mandrel, and adjust the tool accordingly. Consult the instructions to learn how to make these changes and adjust the mandrel length to the size of the self-clinching nut. Self-Clinching Nut Installation: After performing the startup procedures and adjusting the stroke, insert the self-clinching nut into the pre-drilled hole. Place the mandrel in the self-clinching nut and press the tool. The mandrel will automatically seat itself in the self-clinching nut. Press the tool trigger to clamp the self-clinching nut onto the component. The release will occur automatically after the self-clinching nut has been clamped onto the component, allowing you to release the tool. If the tool is not released from the self-clinching nut, press the button on the back of the tool to force the release. Stroke Adjustment: The tool stroke must be adjusted to the component on which the self-clinching nut will be clamped. The E-312NP riveting tool allows stroke adjustment from 1 mm to 7 mm. To adjust it, follow the instructions below: Precise stroke adjustment is crucial for effective self-clinching nut installation. Here are some tips for controlling stroke adjustment: The stroke can be set from 1 mm to 7 mm. The graduated scale on the tool accurately indicates the set stroke. To increase the stroke, move the adjustment slider towards the front of the tool, while simultaneously turning the knob to the left. Then release the slider, ensuring that it is re-seated on the head. The cursor will indicate the range of the set stroke. To decrease the stroke, follow the same procedure, turning the stroke adjustment knob to the right. Our self-clinching nut riveting tool is designed to allow precise stroke adjustment and ensure optimal installation results. Pgodpfx Aljzc Dx Iehon If the stroke is incorrectly adjusted or the self-clinching nut has a quality defect, the mandrel release may be difficult. In this case, use the "anti-block rod," which is included in the kit. Insert it into the hole in the base of the sleeve and turn it to the right to release the self-clinching nut, as shown in the illustration in the manual.

Condition: used, Year of construction: 2018, Manufacturer : SPXFLOW Lightnin Podpfx Alozcznyjhegn Model : HP-25 A Year: 2018 Type : Stirrer Diameter of the stirring blade: 110 mm Length of the stirring shaft: 825 mm Shaft diameter: 12.5 mm Required pressure: 6 bar Manual pin-type lifting system Lifting stroke: 36 cm Maximum width of a container: 72 cm Dimensions: floor to >mixing head (lower position): 55 mm Dimensions: floor to >agitator head (top position): 415 mm Dimension : 110 x 103 x 150 cm Technical documentation available

Condition: used, Manufacturer : DMN Model : BL 200/1 Podsx R Axwspfx Alhogn Type : Rotary valve External diameter : 345 mm Nominal diameter : 205 mm Leroy Somer motor : 0,75 KW Atex class : EX II 20 Tightness : Air purge

Condition: used, Year of construction: 2003, Manufacturer: TBMA Model: H-AR 300 Year : 2003 Type : Rotary valve External diameter : 450mm Pedpfx Aex R Axqjlhogn Nominal diameter : 300 mm. Motor power : 0,75 KW

Condition: new, Year of construction: 2026, Pneumatic double-diaphragm pump Cobra 40 -10 Its unique design enables operation with minimal pulsation. Consistent paint flow for a perfect spray pattern and the highest surface quality. Ideally suited for processing materials that are sensitive to shear and moisture. Minimal shear forces – ideal for processing, e.g., UV coatings. Podpfx Aebuqn Hjlhogn Ideal for processing small quantities of material and for frequent color changes. Scope of delivery: Basic unit on a stand, HD double hose 7.5m, upper container 5l Ex, AirCoat pistol AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40. Technical data: Transmission ratio: 40:1 Volume flow per double stroke: 10 cm3 Volume flow at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Available at a special price – immediately available.

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Pgjdpfx Aohkzu Aelhen Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Condition: used, Pneumatic tilting roller table 1500x2000x900mm Pedpjuglrzefx Alhegn Pneumatically tiltable roller table, stand. Size: 1500 x 200 x 900mm The height of the table in the open state: 1850 mm

Condition: used, Technical details: pressure: manuell t stroke: 15 mm machine weight approx.: 8,4 kg dimensions of machine: 600x250x70 mm Pneumatic Cable Terminal Press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 15mm - tool fork: width=30mm ; length=70mm - maunal lever Ø 30 x L:300mm equipment Pjdpeu Nfr Nefx Alhegn - toolbox with div. round and hexagonal tool jaws i.D. *

Condition: used, Valves, gate-valves, butterfly-valves, ball-valves, security-valves Pedpfotunb Aex Alhjgn

Condition: used, Technical details: pressure: manuell t distance between columns: - mm stroke: ca. 20 mm machine weight approx.: 9,5 kg dimensions of machine: L: 580 x B:280 x H:80 mm pneumatic cable terminal press Pgsdpfxju Nftgo Alhen - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 20mm - tool holder: width=40mm ; length=90mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws see the picture i.D. *

Condition: used, Ballvalves,non-returnvalves,gatevalves,filters. Pgedpfx Aletvb Iqshen

Condition: like new (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, pressing force: 1 t, table width: 200 mm, table length: 230 mm, total width: 400 mm, total height: 860 mm, overall weight: 105 kg, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Rotation stop lever height: 880mm Pgsdpfx Aev E Sazelhen length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DMN-WESTINGHOUSE PTD plug-type deflectors are specially designed for conveying powder and pellets with minimal degradation in pneumatic conveying systems. PTD plug type baffle is used in chemical, pharmaceutical, plastic, food and other related industries. The smooth passage of products is guaranteed by precision machining, good sealing and completely unobstructed passage. The user-friendly, foolproof design enables quick in-situ internal inspection, cleaning and replacement of seals if necessary. The PTD design complies with all applicable workplace safety legislation. Consequently, there are no moving parts on the outside. Pressure up to 3 bar g with static seals PTD 80 Pgedpfx Ajmgb Hholhjn Aluminum housing, tube stainless steel Ø 76.1 x 2.0 mm Pneumatic operation 5/2 with two-way valve 2 coils 24 V DC With 2 inductive limit switches

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 2 t, table width: 330 mm, table length: 350 mm, throat depth: 100 mm, air pressure: 6 bar, cylinder diameter: 28 mm, For sale in new condition HYUNDAE HP-2000 2t PNEUMATIC PRESS Pjdpsvbfbwjfx Alhjgn Brand: HYUNDAE MACHINERY & ELECTRIC CO.,LTD Type: HP-2000 manufacturing of year: 2021 Max. pressing force: 2t open height:300mm Bolster Size: 350x330mm Stroke length: 100mm Cylinder diameter: 28mm built on a press stand Two-handed operation Voltage: 110V Air Connecting Hose Diameter:12mm

Condition: good (used), Year of construction: 1999, machine/vehicle number: 165236.1, Offer 25418 Technical data: - Pressing force approx. 110 kN - Working stroke approx. 50 mm - Force stroke 12 mm - Overhang approx. 150 mm - Table size 280 x 180 mm - Adjustable installation height up to max. 300 mm - 2 manual controls - Air inlet 6 - 8 bar - Total space requirement approx. W 600 x H 2500 x D 900 mm Podpfxezfh Hyj Alhegn - Weight approx. 400 kg