Used Pressure Relief Valve for sale (19,534)

Condition: used, Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve -Manufacturer: Superior, pressure relief valve, unused original packaging Njdpfx Adofyh Dpowecl -Type: 3220-360/360 PSI -Dimension box: 105/50/H50 mm -Weight: 0.3 kg

Condition: used, Line regulating valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: ltron, safety relief valve -Type: 275-D -PN: 16 bar -Connection: DN G 1 " -Quantity: 2 pieces -Price per piece -Dimension: Ø190 x 205 mm -Weight: 5.7 kg / piece Nodeg St Nqjpfx Adwscl

Condition: good (used), Pressure control valve, pressure control directional control valves -Manufacturer: Festo -Type: MS4-LRB-1/4-D6-A8-AS Nedpfx Aocqvprsdwocl -Operating pressure: 0-10 bar -Number: 1x valves available -Price: per piece -Dimensions: 130/60/H40 mm -Weight: 0.22 kg

Condition: good (used), Pressure regulating directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block Ncjdpfxsb S Htpe Adwol -Type: 5350210030 -Price: per piece -Quantity: 10 available -Weight: 0.2 kg

Condition: good (used), Balancing valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator Ncedpfx Aeg St I Todwjl -Manufacturer: Dungs, safety relief valve -Type: FRSBV 1010 -Connection: DN 25 -Dimensions: Ø143 x 190 mm -Weight: 1.2 kg

Condition: used, Proportional pressure regulating directional valves, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Operating pressure: 0-6 bar -Number: 2x valves available -Price: per piece -Dimensions: 110/45/H55 mm -Weight: 0.4 kg Nedpfob Nfc Rjx Adwocl

Condition: used, Screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw compressor, suction regulator relief valve, relief valve Ncsdpfsppdhnsx Adwsl -Manufacturer: Boge, screw compressor intake regulator relief valve from compressor type SL 270 -Type: 644 0041 01 -Pressure: 0.5 - 10 bar bar -Dimensions: 195/100/H140 mm -Weight: 2.0 kg

Condition: good (used), Proportional pressure control directional control valves, solenoid valves, pneumatic valves, air valves, pressure valves, valve blocks, control blocks Ncjdpfob A R Hpox Adwjl -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm -Weight: 2 kg

Condition: good (used), Proportional pressure control directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block Nedpsb A Sf Eofx Adwjcl -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm -Weight: 2 kg

Condition: good (used), Proportional pressure control directional control valves, solenoid valves, pneumatic valves, air valves, pressure valves, valve blocks, control blocks Ncodpob A Simjfx Adwjl -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm Price: per piece -Quantity: 2 available -Weight: 2 kg/piece

Condition: excellent (used), Pressure valve, pressure gauge, pressure indicator, manometer -Measuring range: 0-6 bar -Fitting: Ø 63 mm -Thread: M12/1.5 mm -Price: per piece -Quantity: 10 available Ncedpfx Aob A Nhasdwel -Weight: 0.2 kg

Condition: refurbished (used), Refurbished and pressure tested. Lot of 45 flanged safety relief valves, spring loaded. Pressure ratings between 0.5 - 9 Bar. Nsdjv Dw R Nopfx Adwecl

Condition: used, This listing is for the Spectrum Labs Krosflo Research 11 TFF System Nsdsxv Axxepfx Adwecl The unit is in full working condition and is ready for immediate use The KrosFlo® Research II TFF System by Spectrum Laboratories is a laboratory-scale filtration system designed for microfiltration and ultrafiltration applications. It is particularly suited for research and development processes involving volumes ranging from 2 mL to 15 L. The system is ideal for biotechnology, pharmaceuticals, and academic research laboratories where precise and controlled filtration processes are required.

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Ncedjtrdyropfx Adwsl Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control Nsdpfx Ajfz Dvvedwecl • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Nedpfxsfz Ax Ss Adwocl The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Nsdpfxoflpmqo Adwocl The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Ncedpfxofzrapj Adwel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Nedpfx Asfz A D Nodwjcl Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: excellent (used), Professional ATEQ F620 leak and pressure tester, designed for quality control and production testing. The device enables precise pressure-based (air) leak testing, ideal for applications in automation, pneumatics, automotive, and serial production. Very good technical condition – the device powers up correctly and is ready for use. Current calibration/service: 16.04.2024 (ATEQ) – visible on seals and labels. Features and equipment: • clear LCD display • automatic ZERO function • test programs • communication ports (RS232 / MODBUS / PROFIBUS – depending on configuration) Nsdpfx Adsyc H T Ijwscl • analog and digital outputs • integrated pneumatic system with filter • robust industrial housing • 230 V power supply Laboratory and production-grade equipment – this is not workshop or amateur equipment.

Condition: used, Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Tank has a working volume of 700 l and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 152 l and is designed to operate at pressures ranging from -1 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall line 1,200 mm. The tank has a welded dished top equipped with an inspection manway with an internal diameter of 450 mm and 9 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic valve type NA and 2 stub pipes with mounted accessories. The machine is mounted on 3 legs equipped with tensions cells with a display. The equipment includes full technical documentation of the manufacturer and UDT in polish. Specifications: Capacity: 207.5 gal Diameter: 850 mm Height: 1,200 mm Type of stainless: Stainless Steel AISI 316L and AISI 304 for The Jacket Type Of Heads: Dished Vertical/Horizontal: Vertical Legs/Lugs/Skirt: 3 legs equipped with tensions cells Njdpfx Adoyanzhewocl

Condition: used, Unused Elektror stainless steel radial ventilator/fan directly drive by Hoyer 55kW/400V/2975rpm el. motor. Air output 18 000 m3/hour. Max. static pressure 7000 Pa. Max. temperature 55 deg. C. New 2017. 6 identical pieces available. Specifications: Motor Power: 73.8 hp Ncjdpfx Ajyanzbsdwjl Airflow Capacity: 10,594.4 ft³/min. Total Pressure: 1 PSI

Condition: used, tank capacity: 313 l, GENERAL Design: upright Notes: 3-legged frame, steel (painted; 1 leg shortened); clamp screws steel (with signs of corrosion) Internal diameter: 700 mm Total height: 3,050 mm Heating/Cooling: present Power: 4 kW Max. allowable operating overpressure: 10.0 bar Max. overpressure: 3.00 bar Nsdpfxoxqbbhs Adwjcl Top cover: removable / liftable top cover Agitator: anchor agitator Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Volume: 313 liters Jacket volume: 90.0 liters Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4439 (AISI 316) Condition: used Cylindrical height: 630 mm Previous use: chemicals VESSEL Support type: frame HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / Dome: handhole Outlet: present Note: slight residues AGITATOR Voltage Volts: 220/380 Volts Agitator arrangement: centrally mounted on the top cover

Condition: used, tank capacity: 630 l, GENERAL Design: suspended Remarks: Support ring and vessel flange made of Fe; handhole cover plated Internal diameter: 1,000 mm Total height: 2,000 mm Heating/cooling: available Max. admissible operating temperature: 300 °C Nedpexqba Defx Adwscl Max. admissible operating overpressure: 32.0 bar Max. overpressure: 6.00 bar Top cover: removable / hinged top cover Agitator: anchor agitator Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 630 liters Jacket volume: 14.5 liters Cylinder wall thickness: 7.8 mm Jacket material: V4A 1.4571 (AISI316) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Previous application: chemical industry VESSEL Max. admissible operating temperature: 300 °C Stand type: ring HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole/Dome: handhole Outlet: flange DN50 AGITATOR Agitator arrangement: centrally mounted on top cover Agitator equipment: motor/gear unit missing TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15.3 mm Top cover wall thickness: 15.8 mm

Condition: used, tank capacity: 1,150 l, GENERAL Equipment: Crane lugs Design: hanging Remarks: Halar coating inside (very good resistance to acids, alkalis, and solvents); no nameplate available; several connections have been modified by the previous operator, including one new outlet that was welded in (no coating in the weld area of the bottom plate and in the new outlet itself; no coating on the manway cover either); 5-legged frame made of Fe (galvanized; one leg slightly bent) Outer diameter: 1,250 mm Inner diameter: 1,100 mm Overall width: 1,660 mm Overall height: 2,600 mm Overall length: 1,850 mm Heating/cooling: available Insulation: available Max. overpressure: 0.60 bar Top head: bolted cover Agitator: agitator flange Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Vacuum: 1.00 bar Volume: 1,150 liters Cylinder wall thickness: 4.0 mm Jacket material: V4A 1.4571 (AISI316) Product contact material: Halar E-CTFE coating Condition: used Cylindrical height: 870 mm Previous application: gasoline TANK Max. permissible operating temperature: 120 °C Support style: frame HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation shell: bolted Insulation shell material: aluminum EQUIPMENT Manhole / dome: on top head (DN 400) Outlet: flange DN100 Note: minor residues, dents on insulation shell MATERIAL SPECIFICATION Head material: AISI316 (V4A) 1.4571 Cylinder material: AISI316 (V4A) 1.4571 Njdpfoxqbaksx Adwscl AGITATOR Agitator arrangement: eccentric in top head TECHNICAL DATA / DIMENSIONS Head wall thickness: 4.0 mm