Used Reflection Densitometer for sale (577)

Condition: used, This listing is for 1 of 2 Biorad Gs-900 Calibrated Densitometer The unit is in full working condition and is ready for immediate release The GS-900 Calibrated Densitometer is a self-calibrating 21 CFR Part 11 gel imaging system designed for acquiring gel, blot, and film images. It is capable of reproducibly imaging gels, blots, and film and quantitating proteins across a wide dynamic range. The system uses transmissive and reflective imaging to scan chromogenic samples at the optimal detection wavelength, and its three-color red, green, and blue CCD imaging technology enables accurate, reproducible quantitation with a wide variety of common stains. Key Features: Hnedpoxv D Dcefx Akreu Imaging Capabilities: Transmissive and reflective imaging for gels, blots, and film. Dynamic Range: Wide dynamic range for accurate quantitation. Imaging Technology: Three-color red, green, and blue CCD imaging. Calibration: Self-calibrating for consistent performance. Compliance: 21 CFR Part 11 compliance for regulatory environments. Included Components Scanner and Cables: Comes with the necessary scanner and cables for operation. Optional Software: Image Lab™ Software: PC-compatible software for image analysis. 21 CFR Part 11 Module: Security edition software for compliance with 21 CFR Part 11. Installation and Operations Qualification (IQ/OQ) Kit: Optional kit to meet cGMP environment needs. Specifications: Scan Area: 29 x 33 cm (transmissive and reflective) Wavelength: 400 – 750 nm Bit Depth: 16-bit grayscale

Condition: good (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 8142, control type: manual, Equipment: emergency stop, foot remote control, Thalmann Pico 150 / 6.2 The Thalmann Pico 150-6.2 is a hydraulic long bending machine (swing bending machine) manufactured by the Swiss company Thalmann. The model designation directly reflects the key specifications: a maximum sheet metal thickness of 1.50 mm for steel and a working length of 6.2 meters. Technical data at a glance: • Working length: 6,200 mm • Maximum sheet metal thickness (steel, 400 N/mm²): 1.50 mm • Maximum sheet metal thickness (aluminum, 250 N/mm²): 2.00 mm • Insertion depth / overhang: 1,000 mm • Maximum bending angle: 145 degrees • Equipment: with electric hydraulic roller shear (motor shear) • Total weight: approx. 2,800 kg • Power requirement: 3 kW The machine is in good condition. Available immediately. Hjdpfoz Hiw Tjx Akrjnu Inspection possible by appointment. Price includes dismantling and loading onto a truck.

Condition: good (used), Year of construction: 1992, functionality: limited functionality, machine/vehicle number: 1200, Hundegger P10 – Year of manufacture 1992 – partially modernized control system – good mechanical condition For sale: well-maintained Hundegger P10 cutting machine, year of manufacture 1992, with extensive equipment. Mechanical components in good condition, control system modernized (data import via USB drive, DOS conversion). Hnsdpfszu Anwsx Akrsu 3 measuring scales are missing – the price reflects this. The machine is currently still in operation and can be tested on-site. Technical equipment: Swivel saw, notching milling cutter, rafter nail drilling unit, edge bender, blade milling cutter, horizontal and vertical drill Three-sided cutter, vertical milling cutter, finger cutter, panel cutter, ejector and transverse conveyor For an additional charge, the machine can be delivered throughout Europe – Delivery does not include unloading or assembly. Currently, the cutting system is being dismantled for transport and temporarily stored. A demonstration in operation is no longer possible. However, a video in processing mode can be provided for a better assessment.

Condition: like new (used), 10 - 30 V DC , 200 mA Hnedpfx Akjzfghporsu switchable, with on/off delay Length: 85 mm Diameter: 30 mm Weight: 205 g Condition: like new

Condition: good (used), Year of construction: 2006, operating hours: 20,000 h, Trumpf Haas HL 4006D YAG solid-state laser The Trumpf Haas HL 4006D is a 4000W Nd:YAG solid-state laser designed for industrial applications such as welding highly reflective materials, particularly for use with robots and a range of up to 100 meters via flexible fiber optics. Application areas: Welding: The main application is welding metal parts, especially highly reflective materials such as aluminum and copper, where other lasers are difficult to use. Automated manufacturing: The laser is designed for integration into automated production lines with industrial robots. Precision machining: The high power and precise beam quality enable precise work in industrial machining. Technical data: Manufacturer: Trumpf Haas Type: HL 4006D Rated laser power: 4000 W Beam quality: 25 mm.mrad Wavelength of laser light: 1064 nm Rated voltage: 400 V Rated power: 132 kW Rated power consumption: 140 kVA Year of manufacture: October 2006 Weight: 1500 kg Operating hours: approx. 20,000 Dimensions W x H x D: 3200 x 1700 x 1250 mm Laser optics incl. ILV scanner, pyrometer, and various spare parts Computer with WinLas software for controlling parameters You can find the matching cooling unit and robot in our shop: Rehsler TW HL4006D cooling unit Kuka KR 30/2 6-axis welding robot You can find more items – new and used – in our shop! Hjdpfxoxg Hpcs Akronu International shipping costs available upon request!

Condition: used, This listing is for Specac Quest Single reflection ATR FTIR Accessory The unit is in full working condition and ready for immediate use The Specac Quest is a high-performance single-reflection ATR accessory designed for mid- and far-infrared spectroscopic sample analysis, featuring interchangeable crystal pucks and durable optic Transparency Report and Technical Audit: Software and Media Disclosure: Hnjdpfx Akoztqgxsrou As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. [[1]()]

Condition: used, This listing is for a Grant Bio McFarland DEN-1 Densitometer The unit is in full working condition and is ready for immediate release. The DEN-1 is a compact benchtop turbidity/densitometer instrument manufactured by Grant Bio (part of Grant Instruments). It is designed primarily for life-science and microbiology applications — for example, measuring the turbidity of cell suspensions (bacterial, yeast) or other particulate suspensions. Typical uses include: Determining cell concentration in fermentation or culture processes Assessing microbial susceptibility (via turbidity changes) Identifying microorganisms in test systems Hnodpfexup Nhex Akrsu Measuring optical density / turbidity at a fixed wavelength for dyes or suspensions

Condition: used, functionality: fully functional, machine/vehicle number: SG74S34001, Year of construction: 2017, operating hours: 7,431 h, total length: 2,210 mm, total height: 1,448 mm, total width: 1,238 mm, type of input current: three-phase, input voltage: 400 V, input current: 30 A, HP MULTI JET FUSION 4200 ADDITIVE MANUFACTURING SYSTEM Located in ALBACETE, SPAIN 7,431 print hours · 2 build units · Tested and functional From a professional service bureau that has now closed. Series production of end-use parts in PA12 nylon. === THE SYSTEM INCLUDES === HP Jet Fusion 3D 4200 printer — S/N SG74S34001, P/N M0P44B, built 04/05/2017 HP Jet Fusion 3D Processing Station (powder processing) Build unit 1 — S/N SG74C35005, P/N M0P45B, built 04/05/2017 Build unit 2 — S/N SG74R35003, P/N M0P45B, built 27/04/2017 Extraction system and external powder collection container HP 3D High Reusability PA12 powder in stock, part factory sealed === ACTUAL USAGE DATA === Read directly from the machine's Printer Information screen: Print time: 445,886 minutes, approx. 7,431 hours Jobs: 718 total, 590 completed successfully Layers printed: 2,800,493 Volume printed: 1,308 litres Fusing lamp calibration: valid Material run: HP 3D High Reusability PA12 Last job on record: 1 July 2025 === SERVICE POSITION === The HP service contract has EXPIRED. The buyer will need to arrange service and, where HP requires it, recertification on relocation or change of ownership. That cost is not included in our price and is worth budgeting for. The machine has been standing since July 2025. We cannot warrant printhead condition after that time; it would be sensible to plan on replacing them. The agent cartridges are effectively empty (0.2 cc fusing, 0.2 cc detailing). The intermediate tanks hold approx. 1,470 cc and 1,142 cc. HP discontinued this model in October 2024, with supplies and support committed through October 2029. The price reflects this position. === TECHNICAL DATA === Manufacturer: HP Model: Jet Fusion 3D 4200 Year: 2017 Technology: Multi Jet Fusion (MJF), powder bed Printer supply: 9 kW, 220-240 / 380-415 V, 30 A, 3W+N+PE Build unit supply: 3 kW, 200-240 V, 16 A, single phase Approvals: UL E165854, CE, FCC Part 15, EAC Hodpfxey U H Ide Akrenu Printer dimensions: 2,210 × 1,238 × 1,448 mm === APPLICATIONS === Series production of end-use parts, short and medium runs, functional prototyping, automotive, consumer goods and tooling. High Reusability PA12 allows unfused powder to be recycled between jobs. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE2-HP Serial numbers, plate photographs and the Printer Information screen are available in the attached documents.

Condition: excellent (used), machine/vehicle number: 27639, Part: 3265 - 36.21.43 Hjdpfx Akoymnlasrenu

Condition: used, mileage: 24,613 km, power: 130 kW (176.75 HP), first registration: 06/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,051 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * Exhaust system, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * 4-cylinder turbo diesel engine, 2.0 l / 130 kW (4V) BIT * Start-stop system with brake energy recuperation * Front tow hook * Towing hitch, fixed * Fuel tank, 75 l * Approved as 3.5t * Front axle, reinforced * All-season tires * Battery, 520 A (92 Ah) * Engine immobilizer, electronic * Electrical connection block and preparation for external equipment * 'Climatronic' air conditioning in the driver's cab * Daytime running lights with automatic activation and coming/leaving home function * LED main headlights with LED daytime running lights * LED interior lighting concept in passenger/cargo compartment * Fog lights incl. cornering lights * Side marker lights * Headlight cleaning system, windshield washer fluid level indicator, heated windshield washer nozzles * Step lighting * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirrors left and right, convex, with integrated LED turn signal and wide-angle view * Rear step, over half the width * Grab handles on the rear pillars * Rear wing doors with enlarged opening angle * Windshield wiper intermittent operation with light and rain sensor * Sliding door, right * Laminated windshield with heat-reflective glazing, heated * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots, and reading light * Sun visors, foldable and swiveling sideways * Electronic parking brake * Premium interior noise reduction measures * Glove compartment with lockable lid, illuminated * Leather multi-function steering wheel, heated with Tiptronic * 12V socket, cup holder * Three-point automatic seatbelts with height adjustment * 12V socket in the driver's cab (in the instrument panel) * Seat belt warning, electronic contact in the seat belt buckle * 2 remote control keys * Keyless Go * Auxiliary water heater with remote control * Chrome package * Suspension seat 'ergoActive' left * Front passenger double seat bench, right, with storage compartment and foldable center backrest * Seat covers in 'Toronto Grid' fabric * Seat heating for driver and front passenger seat, separately adjustable * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van Navigation Business (12.9 inches) * Digital radio reception (DAB+) * MAN SmartLink Hnodjz Swnropfx Akrju * MAN Connect * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip control (ASR), and ABS * Park assist front and rear * ACC Stop & Go * Traffic sign recognition * Rear view camera system with dynamic guide lines * High beam assist 'Light Assist' * Driver alertness and fatigue warning system * Lane change assist * Crosswind assist * Blind spot detection on both sides and starting assist * Turning assist * Emergency assist (active lane keeping assist and emergency assist and traffic jam assist) * Intelligent speed assist * With multi-function camera Cruise Assist Plus * Wooden floor in the passenger and cargo compartment with wheel arch lining * Load securing rails (airline) in the cargo compartment: side walls and bulkhead * Grab handle on the bulkhead in the cargo compartment * Side interior paneling in the cargo compartment made of plastic hollow chamber plates, up to the

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,044 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, laser power: 6,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 fiber L76 FMC was manufactured in 2022. It features a working format of 3,000 x 1,500 mm and a powerful 6000W solid-state disk laser. The machine includes an automatic longitudinal pallet changer and advanced cutting capabilities, such as adaptive lens systems and automatic nozzle changers. If you are looking to get high-quality fiber laser cutting capabilities, consider the TRUMPF TruLaser 5030 fiber L76 FMC machine we have for sale. Contact us for further details. • Working format/area: 3,000 x 1,500 mm; X 0–3,000 mm / Y 0–1,500 mm / Z 0–115 mm Hnedpfxjzuzwdj Akrou • Machine design: Closed machine frame; gantry drive with direct linear drives; automatic longitudinal pallet changer; integrated control cabinets and storage cabinet; working-area lighting; machine status light; water/air machine and laser chiller; CE compliant; ambient temp 5–35 °C • Dynamics/accuracy: Max simultaneous axis speed 280 m/min; Ps 0.03 mm; Pa 0.05 mm; min programmable increment 0.001 mm • CNC control: Siemens SINUMERIK 840D sl with 21.5" color MultiTouch; MultiTouch HMI; USB and RJ45; integrated technology data; programmable cutting gas/pressure; production planning; multi-sheet processing; automatic shutdown; Remote Support interface; Condition Guide; Cutting Guide; Central Link; Online Update Manager • Laser source: TRUMPF TruDisk 6001 (6 kW) solid-state disk laser; fiber-optic beam delivery; one LLK output; closed beam guidance; high back-reflection resistance; stable output over service life • Cutting head: Universal cutting unit; single cutting-head strategy; adaptive lens system; protective glass with online condition monitoring; auto nozzle centering; collision protection; capacitive height control; automatic focal position; pilot laser • Standard cutting functions: AdjustLine; BrightLine fiber; ControlLine; FastLine; FlyLine; FocusLine; NitroLine; PierceLine; Performance package; Highspeed cutting package; Copper and Brass cutting packages; Micro-weld • Additional cutting package: Highspeed Eco (fusion cutting, medium-thickness stainless steel) with up to 70% cutting-gas reduction and up to 100% sheet throughput increase • Automatic nozzle changer: 21 positions; automatic change/cleaning/re-setting tied to material/process; reduces setup/handling • Drop&Cut: Integrated camera; assigns live image of residual sheet to part geometry; live cutting preview; no separate programming needed for basic use • Process monitoring camera: Front-area monitoring (~2.5 m); remote observation; preliminary result assessment; video stream output to external monitor • Pallet/material handling (machine-integrated): Automatic longitudinal pallet changer; loading/unloading parallel to machining; pallet access from three sides • 1 x license TruTops Boost Additional equipment • LiftMaster Compact 1530 (AL34) automatic loading/unloading system • Type 1530; max sheet 3,000 x 1,500 mm; min sheet 1,000 x 1,000 mm • Max sheet thickness 25 mm; max sheet weight 900 kg; max unloading weight 900 kg • With rake lifter: max thickness 25 mm; with rake lifter + belt system: max thickness 15 mm • Minimum part size with rake lifter: 150 x 150 mm • LiftMaster equipment/options • Storage connection; extended pallet travel out of machine • Sheet separation device; double-sheet detection; synchronous loading • Thin-sheet separation (0.8–2.0 mm); loading station for 90 mm stack height • Structural-steel loading grippers, 67 mm pitch, replaceable tines

Condition: used, Bruker Type: Tensor 27 IR Spectrometer Maximum sample flexibility. Thanks to the improved QuickLock™ mechanism and the locking button on the front, even bulky accessories can be quickly and, above all, safely installed. In addition, the INVENIO can be equipped with three software-controlled beam outputs for a wide range of external modules. FPA micro and macro imaging Variable external sample chamber (left and right) for individual experiments Hsdpfx Akszh D Nvsronu Fiber optic coupling to fiber probes for liquids and solids Integrating sphere Autosampler for liquids High-throughput analysis module HTS-XT Reflection unit for the air-water interface And much more! Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, mileage: 2,75,932 km, power: 120 kW (163.15 HP), first registration: 04/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, exterior temperature display, battery 100 Ah, additional battery (reinforced), battery disconnect switch 1-pole, turn signals in the front, roof console with reading light for driver/passenger side, door entry lights, additional main key, folding cover for storage compartment, programmable special module, spare wheel Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver seat comfort, reinforced rear stabilizer bar, reinforced front stabilizer bar, fuel gauge for auxiliary heater, separation relay for additional battery, rear wall paneling, thermal insulation for the driver's cab, heat-reflective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, roof lining in the cab, glove compartment lockable, body/superstructure: standard platform body, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 L - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, service interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle/rear axle incl. stretcher and transfer chair from Stollenwerk, 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle box body * Superstructure by Fahrtec Systeme * Adjustable floating table * Stretcher by Stollenwerk * Transfer chair by Stollenwerk * Central locking for the patient compartment * Air conditioning KONVEKTA * 1 attendant seat * Refrigerator * Warming cabinet * Sink * Medical cabinets * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Roof hatch * External storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning, front and rear * Automatic transmission Hedpfx Akszn El Sersnu * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Rear axle with dual tires * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * GVWR: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti, DOT 2023, with approximately 8.0mm tread depth in the front and approximately 6.5mm in the rear. Engine, automatic transmission, and rear axle are dry. The engine runs smoothly and the automatic transmission shifts cleanly. Starter battery is new. +++ Errors, changes, and prior sale are reserved.

Condition: used, mileage: 29,476 km, power: 96 kW (130.52 HP), first registration: 03/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,134 mm, loading space width: 2,090 mm, loading space height: 2,160 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Errors and prior sale excepted! Internal number: 1337. NB38199 ----EQUIPMENT * Heated windshield * Battery: AGM deep-cycle high-performance battery - 2 AGM batteries - Standard battery replaced with AGM, including extended battery life to 30 minutes * Exterior mirrors, long arm - with integrated turn signals * Box body with tail lift * Transmission: 6-speed manual transmission * Anti-lock braking system (ABS) with electronic brake-force distribution (EBD) * Airbag, driver's side * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, flat * Roof, overhead storage compartment in front * Headliner in driver's cab * Roof marker lights * Tachometer * Electronic Stability Program (ESP) with Traction Control (TSC) - Hill Start Assist - Crosswind Assist - Emergency Brake Assist - Rollover Protection - Emergency Brake Support including emergency brake light - additionally with trailer stabilization only in conjunction with a trailer coupling (surcharge) * Power windows, front, electrically operated - with quick-up/quick-down function for the driver's side * Ford Easy Fuel - convenient fuel filler cap and misfueling protection * Generator, high-performance version * Headlamp, low beam: Halogen headlights with daytime running lights * Glove box with lockable lid * Interior lighting with delay function with reading lights in the front * Air conditioning, front, including dust and pollen filter * Fuel tank, 70 l * Radiator grille: 3 bars and surround in black-grey plastic Hnjdoz S Siwspfx Akreu * Paint: Solid color paint * Steering wheel: Artificial leather steering wheel * MyKey key system - individually programmable second key * Fog lights * Emergency Assistance * Technology Package 8 - Windshield, heated - Windshield wipers with rain sensor - Active emergency brake assist (camera-based) - Lane Keeping Assist with driver drowsiness warning and automatic high-beam headlights, additionally with Lane Departure Warning - Headlight assist with day/night sensor - Cruise control - Ford audio system (DAB+, MyFord Dock, FordPass Connect, speakers, antenna, controls on the steering wheel, Bluetooth, USB, hands-free system) * Particulate filter: Diesel particulate filter * Power steering * Seat belts - seat belt pretensioners and force limiters, front * Seat Package 13 - Driver's seat, 4-way adjustable (fore/aft, backrest, seat cushion tilt, height) - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests, height-adjustable - Tray integrated in the double passenger seat (fold-out) - Interior armrest for driver - Lumbar support, manual (driver's seat) - Seat cover: Fabric * Start-Stop system * Recirculation system * Immobilizer * Heat-reflecting glazing, lightly tinted * Central locking with remote control ... and more ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: used, axle configuration: 3 axles, first registration: 06/2022, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Hjdpfsz S St Njx Akrenu Body: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, made of galvanized steel up to the support structure (semitrailer construction, max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BWI) readable in the central control unit (CCU) (display), 1st axle with starting aid (new EC regulation, without CCU option). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on steel rims, silver, 11.75x22.5, offset 120. Kingpin: 2" kingpin bolted into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 tons support load with pivoting foot. Braking System: According to EC standards, EBS E system Wabco with RSS (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lights, Aspöck Europoint 3 type, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-shaped protection. Body/Container: Body completely welded on the inside, reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum container, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt. Plank profiles completely welded on the inside. Floor as a sliding floor system laid on 140 mm ALU cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special ALU corner profiles in a beveled design. Smooth rear wall in a straight design with 2 ALU wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in a welded ALU rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving discharge wall with Kevlar cover, approx. 1,800 mm long, plus side Kevlar seal. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders, plus anti-lifting glide bearings, type CF, 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed stops on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed stops. Line size NW 21. Fixed stops with a size and design to be specified. Operating pressure 190-max. 240 bar. ALU end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, waterproof box. Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU wheel chock, side ALU impact protection in a folding design, 1 toolbox approx. 860x460x400 mm in p

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm 2 wheel chocks with holders Half-shell fenders with anti-spray flaps per EC standards Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Hnodpfx Aoz R Tr Sjkrsu Note: Archive images!

Condition: used, mileage: 90,161 km, power: 75 kW (101.97 HP), first registration: 05/2022, fuel type: gasoline, axle configuration: 4x2, wheelbase: 2,810 mm, fuel: super 95, CO₂ emissions: 148 g/km, fuel tank capacity: 50 l, color: silver, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 4,390 mm, total width: 1,780 mm, total height: 1,840 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, navigation system, onboard computer, power assisted steering, power mirror, sliding door, start-stop system, General information Number of doors: 5 Model range: May 2021 - Dec 2024 Cab: single Registration number: V-14-RDD Technical information Torque: 200 Nm Number of cylinders: 4 Engine capacity: 1.333 cc Acceleration (0-100 kph): 11,9 s Top speed: 167 km/h Measures length/height: L1H1 Weights Empty weight: 1.194 kg Carrying capacity: 677 kg GVW: 1.871 kg Interior Interior: black Consumption Average fuel consumption: 6,5 l/100km (43 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): tested until 09/2028 Number of keys: 2 (2 hand transmitters) Hjdpeziy H Tjfx Akrjnu Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Automatic dipped headlights - Bluetooth car kit - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Heated door mirrors - Heat reflecting glass - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Multifunctional steering wheel - Multimedia enabled - Partition - Radio - Radio with DAB+ - Rain sensor - Rear doors - Rear parking sensor - Remote central locking - Sliding side door right - Third brake light

Condition: ready for operation (used), Year of construction: 2025, machine/vehicle number: 3401721031, functionality: fully functional, operating hours: 35 h, power: 4.5 kW (6.12 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 340 mm, cutting width (max.): 500 mm, control type: CNC control, roller diameter: 340 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 15 rpm, rotational speed (min.): 150 rpm, total height: 1,870 mm, total length: 3,000 mm, total width: 3,000 mm, overall weight: 2,150 kg, table height: 800 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, History, 6-Month Warranty We offer for sale a professional CNC automatic band saw for metal cutting, PEGAS 340 KATANA X-CNC-LR, designed for both automatic and angular cutting operations in metalworking and fabrication industries. This is not a standard used machine from a production environment. The saw was used as a manufacturer's demonstration machine and has accumulated only approximately 1,000 operating hours since 2017. It has a fully documented history, has been professionally maintained throughout its service life, and remains in excellent technical condition with minimal wear. Main Features ✔ Fully automatic CNC operation ✔ Automatic programmable miter cutting ✔ Saw frame swiveling range from +60° to -45° Hnedpfezg Hvijx Akrsu ✔ Automatic material feed system ✔ Precision ball screw drives ✔ Siemens CNC control system ✔ Cutting program storage and management ✔ Heavy-duty industrial design for long-term operation Key Advantages Only 1,000 Operating Hours Exceptionally low operating time for a machine of this age, reflecting its use as a demonstration unit rather than in continuous production. Manufacturer Demonstration Machine Clear origin, documented service history, and professional maintenance by the manufacturer. 6-Month Warranty Additional peace of mind when purchasing a used machine. Immediate Availability Ready for immediate installation and operation. Significant Cost Savings Acquire a modern CNC band saw at a fraction of the cost of a new machine while maintaining high productivity and cutting accuracy. Demonstration Available The machine can be inspected and tested under power prior to purchase. Machine Condition Fully operational Regularly serviced Approx. 1,000 operating hours Ready for immediate use Available for inspection in Slavkov u Brna, Czech Republic A brand-new machine with full manufacturer's warranty can also be supplied upon request.

Condition: used, mileage: 95,924 km, power: 66 kW (89.73 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 1,740 kg, maximum load weight: 1,000 kg, overall weight: 2,740 kg, axle configuration: 4x2, wheelbase: 3,098 mm, next inspection (TÜV): 06/2027, fuel: diesel, fuel consumption (urban): 7.8 l/100km, fuel consumption (extra-urban): 5.7 l/100km, fuel consumption (combined): 6.5 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,999 mm, Year of construction: 2015, construction height: 1,950 mm, Equipment: ABS, airbag, electronic stability program (ESP), onboard computer, sliding door, soot filter, traction control, Optional equipment: Airbag, passenger side, airbag, passenger side, can be deactivated, parking assistance system, rear, tailgate with window, rear window wiper, heated rear window, cargo area partition with window, wheel covers, smoker's package, spare wheel with road tires, sliding door, cargo/passenger compartment, left side, with window, sliding door, cargo/passenger compartment, right side, with window, side airbag, front, head airbag system (windowbag) Additional equipment: Hodpfx Aoz Sfgwokrjnu Airbag, driver side, traction control system (ASR), exterior mirrors, electrically adjustable and heated, battery 85 Ah, on-board computer, tachometer, automatic headlight activation, interior filter: pollen filter, body/superstructure: standard van, fuel tank: 80 liters, steering column (steering wheel) adjustable, engine 1.6 liter - 66 kW dCi diesel, rear fog light, wheelbase 3098 mm, low emissions according to Euro 5 emission standard, seat cover/upholstery: fabric, seats in the driver's cab: double passenger seat, seats in the driver's cab: driver's seat, comfort, 3-way adjustable, lashing eyes in the cargo area, side, lashing eyes in the cargo area, floor, pre-wiring for electrical equipment, heat-reflecting glass The equipment was determined with the help of a VIN query; errors may occur for technical reasons. Sale only to commercial businesses (agriculture, freelancers, small and medium-sized enterprises) or for export. Subject to errors and prior sale.

Condition: used, mileage: 7,458 km, power: 110 kW (149.56 HP), first registration: 08/2021, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 10/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, INTERNAL VEHICLE NUMBER: M533----VW T6.1 2.0 TDI 3-WAY TIPPER----KM: 7,458 FULL SERVICE HISTORY ALL INSPECTIONS WERE CARRIED OUT AT A MANUFACTURER-AUTHORIZED WORKSHOP DIGITAL VEHICLE HISTORY AVAILABLE 1 OWNER----* BRAKE ASSIST * START/STOP SYSTEM * HILL START ASSIST * CROSSWIND ASSIST * EMERGENCY BRAKE ASSIST (HBA) * CRUISE CONTROL * SPEED LIMITER * AUTOMATIC LIGHT CONTROL ----AUTOMATIC TRANSMISSION----3-WAY TIPPER----SEAT HEATING----HEATED WINDSCREEN----GROSS VEHICLE WEIGHT: 3,000 KG----TOW BAR TRAILER LOAD: 2,500 KG----TIPPER BODY BY SCHOON----TIPPER DIMENSIONS: LENGTH: APPROX. 3.05 METERS WIDTH: APPROX. 2.00 METERS HEIGHT: APPROX. 0.40 METERS----FRONT PANEL GRILLE BY SCHOON----2X TOOLBOXES ON RIGHT AND LEFT BY SCHOON----* ELECTRIC WINDOWS * ELECTRIC / HEATED SIDE MIRRORS * AUTOMATICALLY DIMMING INTERIOR MIRROR * BLUETOOTH HANDS-FREE SYSTEM * USB * MINI SD CARD * SD CARD * 12V SOCKET * REAR WINDOW HEATER * DOUBLE PASSENGER SEAT WITH STORAGE COMPARTMENT ----Special Equipment: * 2nd Battery with Battery Monitoring * Lighting + Visibility Package * Comfort Package Plus * Convex Exterior Mirrors, Large Brackets * 17" Chassis * Vehicle Without Flatbed * Cruise Control System (includes Speed Limiter) * Illuminated Glove Compartment * Heated Rear Window * 80 Litre Fuel Tank * Heavy-Duty Suspension * Heated Driver and Passenger Seats * 7x17 Steel Wheels * Winter Package, Perm. Gross Weight 3.00 t Further Equipment: * Passenger Airbag Deactivation * Driver and Passenger Airbags * Traction Control (ASR) * Audio System Composition Audio (Radio, SD Interface, MP3 Function) * Electrically Adjustable & Heated Exterior Mirrors * Rubber Floor Mats in Cabin * Onboard Tools * Dual Headlights * Brake Assist System (HBA) * Multi Collision Brake Assistance System Hnjdpfxjzy Tyhs Akrsu * Laminated Windscreen * 2 Foldable Remote Keys * Lockable Glove Compartment * Cabin Pollen Filter * Body/Build: Standard Platform * Headlight Range Control * Engine 2.0 Ltr. - 110 kW TDI * Non-Smoker Package * Digital Radio Reception (DAB+) * Wheelbase 3,400 mm * Tyre Repair Kit * Low Emissions per Euro 6d-TEMP * Passenger Double Seat with Lockable Storage in Seat Base * Adjustable Driver’s Seat * Engine Start/Stop System * Lashing Eyes in Load Area * Driver Seatbelt Warning System * Tinted Heat-Reflective Glazing * Central Locking with Remote and Interior Operation ----Upon request, we can retrofit a tow bar. Professional installation, fast and reliable, starting from €599. ++ Exclusive Promotion at Autohaus Mat GmbH: Up to €1,000 trade-in bonus – your advantage when changing vehicles! ++ Contact us directly via WhatsApp at: Why choose Autohaus Mat GmbH? 1. Attractive Trade-In: We handle the process quickly and fairly. With our trade-in bonus, you maximize your vehicle’s value and benefit when purchasing a new model. 2. Tailored Financing Solutions: Would you like to finance your new vehicle? We offer custom financing solutions adapted to your needs: * With or without down payment * Flexible

Condition: excellent (used), Professional measuring device from the renowned manufacturer TECHKON on offer – model SpectroPlate. The equipment is intended for quality control of printing plates in the printing industry. Key Information: Manufacturer: Techkon GmbH (Germany) Model: SpectroPlate A801070 Type: Densitometer / printing plate measuring device Application: quality control, exposure and CTP plate parameter measurement Hodpfx Akjz Smy Eersnu Power: power supply included Condition: used, fully functional Equipment Included: Techkon SpectroPlate meter original power supply all items as shown in the photos Condition: The device has been used and exhibits normal signs of wear, but it is in good condition and ready for operation.

Condition: good (used), Year of construction: 2010, 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC TECHNICAL DATA Manufacturer: Werth Model: Video-Check-IP 400×200 3D CNC Function: 3D Coordinate Measuring Machine Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 250 mm Max. workpiece weight: 30 kg Drives: Ball screw drives with servo motors Measuring systems: Incremental scales with 0.1 µm resolution Guides: Precision ball guides on all axes Illumination: Transmitted light, bright field and dark field reflected light with LED Optics: Zoom optics with zoom factor 0.2x–100x Camera: High-resolution CCD black-and-white camera Electrical connection: 230 V AC, 50 Hz Current consumption: max. 10 A Power: max. 1.5 kVA Noise level: < 70 dB(A) SCOPE OF DELIVERY Including (not limited to): 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC Control panel Probes Fiber optic and reference standard sets Exact scope of delivery according to photo documentation The Werth Video-Check-IP 400×200 3D CNC is a high-precision coordinate measuring machine for optical and tactile metrology. With a measuring range of 400 x 200 x 250 mm, it offers versatile application options for quality assurance of a wide variety of components. The combination of high-resolution CCD black-and-white camera, powerful zoom optics and LED lighting ensures precise image capture and reliable results. Precision ball guides and servo drives guarantee high repeatability. The device comes with extensive accessories and is ideally suited for precise 3D measuring tasks in industrial and manufacturing environments. Hjdpfjxfluusx Akrsnu No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21201011210, empty load weight: 3,420 kg, maximum load weight: 8,380 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 07/2021, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 60 %, Year of construction: 2021, Please note: the images are archive photos. The vehicle may currently be in use! # Chassis – centre-axle trailer - Fine-grain steel welded construction, "10-year warranty against rust-through" - Outer frame slightly inclined with "Load-Lock-Profil" for attaching lashing straps - Gear-driven landing leg at front, folding rear support, side door stays - Steel rear underrun protection, rear corner impact protection - 1 spare wheel carrier for 1 spare wheel, with wheel fixing kit - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with padlock (padlock not included) - Without ramps - Platform height 1080 mm – observe overall height! # Towing device – centre-axle trailer - Drawbar with certified 40 mm towing eye, haulage version - Drawbar mechanically height-adjustable via threaded spindle, below floor level, max. adjustment range 200 mm - No drawbar length adjustment Hedjz R Afyspfx Akrjnu # Axles + suspension - BPW drum brake axles, air suspension - Axles/running gear laser-aligned – reduces tyre wear and fuel consumption # Braking system - Dual-line compressed-air braking system, colour-coded lines for easy servicing - Spring-brake parking brake - Duomatic connection at front, with connecting line to towing vehicle - EBS with EBS connector at front, with connecting cable - Caution: the trailer may only be towed by vehicles ensuring the effectiveness of the ABS! - Raise/lower valve, vehicle stability system # Wheels and tyres - 235/75 R17.5, make at manufacturer's discretion, steel rims factory silver # Electrics - 24 V, multi-chamber lamps, yellow LED side lighting - 2 white front position lamps, 2 white/red outline marker lights at rear - 1 x 15-pin connector at front, with connecting cable # Floor - Film-faced plywood approx. 30 mm, for high point loads - Floor rated for forklift loads up to 2900 kg - Platform length approx. 7300 mm # Front wall / front corner posts - Through-loading system with front portal doors, double-leaf, each with 2 internal cam-bar locks - Steel corner posts, release device for side curtain - Bridge plate approx. 2400 mm wide, divided once, approx. 350 mm long to rest on tail lift, capacity approx. 1800 kg, incl. tail lift support - (Drawbar length then approx. 2100 mm; for 1800 mm tail lift, truck coupling set-back min. 20 to max. 240 mm) # Centre stanchions - 1 pair of sliding stanchions, movable over full length, with fourfold slat pockets and long pocket at bottom - 1 pair of fixed stanchion positions # Insert slats - 5 rows of aluminium V-slats # Rear wall / rear corner posts - Steel rear corner posts up to roof underside - Curtain attachment with round tube, curtain tensioning ratchet - Rear portal doors, double-leaf, each with 2 internal cam-bar locks # Curtain - Welded-in horizontal and vertical straps, stainless steel tensioning buckles # Roof - Sliding roof, slides from rear to front - Rear end carriage folds upwards - Curtain colour: white - Optimised rain gutter at rear, on top of rear bow above doors # Country of registration / plates - Germany, with DEKRA inspection and expert report (acc. to §13 EG-FGV) - 24/7 service hotline - Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL - Prepared for single-line number plate holder - White reflective strips: along bottom of side curtains and at top corners - Red reflective strips: around rear portal

Condition: used, Trumpf TRUMPF TruDisk 6602 (4 C) High-performance disk laser with up to 6.6 kW   Type: TruDisk 6602 (4 C)   The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser with approximately 6.6 kW continuous power – perfectly suited for welding, cutting, and surface treatment processes on metals such as steel, aluminum, copper, etc.   System type: TruDisk 6602 (4 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5   No further testing was carried out in-house. The operating hours could not be read. The laser ran perfectly until the end.   Key technical features: Power: 80 W to 6600 W continuously adjustable, max. 6.6 kW machine tools Beam quality: < 2 mm·mrad for excellent focus handling Wavelength: 1030 nm (infrared), also adapted for green wavelength in special models Output options: Up to 4 laser outputs (4C) for simultaneous supply to multiple process cells Cooling system: Integrated heat exchanger (up to 28 °C inlet temperature), optional compressor cooling (up to 38 °C) Modular and service-friendly: Compact design (< 1 m² footprint), modular components for fast service   Hnjdpfszii D Iex Akrju Advantages & Applications Maximum process stability: Real-time power control ensures reproducible results Reflection resistance: Patented resonator design allows welding of reflective metals such as copper/aluminum Industry 4.0-capable: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance Energy efficiency: Up to 50% less power consumption thanks to intelligent pulse control and energy-saving modes Versatility: Applications range from welding (also BrightLine for virtually spatter-free results) to cutting, hardening, casting processing, additive manufacturing, laser wire arc welding, etc.   Suitable applications: Ideal for industrial high-power laser applications: Application Features Manufacturing of automotive structural components Deep welding with high reproducibility Copper welding Particularly suitable with green wavelength (> 95 % spatter reduction) Remote hybrid welding Fast processing of large areas with a robust beam Additive manufacturing & hardening Suitable due to beam quality & compact design   Key technical data Property Laser power Up to 6,600 watts (6.6 kW), continuous Beam quality < 2 mm·mrad Wavelength 1030 nm (infrared) Number of outputs (4C) Up to 4 parallel usable fiber outputs Fiber connection diameter 100–600 µm (depending on configuration) Beam guidance Fiber-based, passive (no beam steering mirrors required) Cooling Water/air-cooled, internal or external chiller Dimensions Approx. 1000 × 800 × 2100 mm (W×D×H, depending on the version) Weight ~800–1200 kg (without cooling) Power supply 380 V - 10 % ... 460 V +10 %, 3AC + PE 38 kW / 41kVA 59 A / 400 V 50... 60 Hz Control TruControl 1000/3000, OPC-UA interface Safety standards Laser protection class 4 according to EN 60825-1   Weight: approx. 1200 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, TRUMPF   TRUMPF TruDisk 4002 (4 C) High-performance solid-state disk laser with up to 4 kW   Type: TruDisk 4002 (4 C)   The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with high demands on quality, Hnsdpfx Ajzii Nqekrju precision, and automation. The combination of high power, excellent beam quality, and Smart Factory features makes it particularly attractive for modern production lines.   System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3*   No further testing was carried out in-house. The operating hours could not be read out. The laser ran perfectly until the end.   Technical features:   Power & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on the configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: Energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optionally with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design is also suitable for highly reflective metals Industry 4.0 capable: extensive sensors + data interfaces for condition monitoring, OPC-UA, predictive maintenance   Possible applications:   Scanner & hybrid welding (e.g., body construction, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface treatment Cladding, hardening, deep welding with high precision requirements   Technical data:   Supply voltage: 380 V (-10 %) to 460 V (+10 %), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Degree of protection: IP 54 Short-circuit strength: Icn / SCCR 50 kA   Weight: 850 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.