Used C 26 Genius for sale (60,379)

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA - multiple combination for sawing, milling, planing-thicknessing. The work tables made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free working. Unique in this performance class: lightweight aluminum sliding table, anodized, with ball contact system. Swiveling saw blade from 90° - 45 Table extension arm with aluminum crosscut fence for panels and large workpieces Planing unit with TERSA quick change system with three planing knives Helical toothed steel infeed roller for constant workpiece infeed during thickness planing Curved milling hood for profiling, standard with fine adjustment Milling unit with two speeds Three independent motors for each working unit Quality Made in Europe Equipment details Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Durably lightweight Saw unit adjustment Manual height and angle adjustment of the saw unit via star knob Precise positioning by means of a scale TERSA planer cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Particularly low noise Table planer The milling unit has two speeds for flexible tool use. The machine is equipped with a finely adjustable bow cutter for profiling. With the aluminum slide tenoning is possible without any problems. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helical toothed infeed roller guarantees constant infeed. The planing table can be folded towards the inside of the machine to save space. The changeover from planer to thicknesser is done in seconds with one handle. Surface planer Standard with TERSA planer blade quick change system Large dimensioned jointer tables The planing and thicknessing tables are made of grey cast iron and guarantee the smoothest running and vibration-free operation. Saw unit Saw swivels up to 45 With saw blade 250 mm Ø at max. 80 mm cutting height On the rip fence can be cut up to 500 mm width. Table extension With degree scale and aluminum fence for angular cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer cutterhead Anodized aluminum format sliding carriage Miter fence with one folding stop Multifunctional fence for parallel cutting and planing Eccentric clamping arm Model minimax c 26g TERSA Article no. 5500027 Cutting length 1200 mm Cutting width with rip fence 500 mm Max. Cutting width left of saw blade 1200 mm saw blade inclination 90 - 45 degrees Max. Cutting height at 90° 80 mm sliding carriage length 1140 mm Format sliding carriage width 201 mm Height of sliding table 70 mm Saw table length 1024 mm saw table width 224 mm saw table height 900 mm Cutterblock type TERSA Kwodpfodqzh Tex Adwet Cutterblock diameter 62 mm Number of planing knives 3 pcs Planing table width 260 mm Dressing table length 1040 mm Angle of inclination of sawing/planing fence 90/45 degrees Dressing chip removal max. 3 mm Thicknessing table length 450 mm Thicknessing table width 260 mm Thickness working height min. 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, mileage: 2,14,681 km, power: 80 kW (108.77 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 630 kg, maximum load weight: 2,870 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 4,250 mm, next inspection (TÜV): 11/2026, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Equipment: airbag, central locking, electronic stability program (ESP), Performance/Engine: 1,968 cm³, 4-cylinder, with turbocharger Axles: 4x2 Brakes: Disc brakes Cab: Tinted windows, electric windows, electric exterior mirrors, audio system Refrigerated body: Deep-freeze, 1 door on the right, 2 rear doors, fixed partition wall Kwsdpfsx Enuysx Adwst Refrigeration unit: Carrier, 350 MT, multi-temp with 2 evaporators, compressor/power-driven, cooling down to -20°C Other equipment: Power steering, immobilizer Registration / Documents: Previously registered in Germany, Emission sticker 4 (green), AU: 12/2026 For sale on behalf of customer Location: Postal Code 89 ID: 117321 Panel van Carrier Xarios 350 MT refrigeration unit Front and rear stabilizers 6-speed manual gearbox 4-cylinder 2.0l diesel engine Long wheelbase Partition wall Bi-Temp -20°C 3.5-ton GVW Central locking with remote control Driver airbag Right sliding door, special version Hinges for rear doors with increased opening angle Exhaust system: EU5 plus Video: We always have a large selection of used refrigerated and deep-freeze vehicles in stock. You can find more from our range at Non-binding offer, sale on behalf of customer, errors and prior sale reserved Advertising and company logos on vehicles may have been digitally altered in photos

Condition: used, Year of construction: 2019, operating hours: 1,360 h, Mini excavator CASE CX26C, * Year of manufacture 2019, * 1360 operating hours, Kjdpfxjurfkce Adwowt * Heating, * Air conditioning, * Rubber tracks, * Dozer blade, * Quick coupler

Condition: new, - New-- Cutting plane directly on the sliding carriage- Heavy steel and cast iron construction- Precision-guided format sliding carriagemade of aluminium, anodised as standard- Large table extension on telescopic armguided and longitudinally displaceable- Extendable aluminum telescopic stop,angle-adjustable with professional stop flaps- Rip fence with quick release and fine adjustment- Large work table made of milled gray cast ironremains permanently plan- The standard table extension and table extensionextension make it easy to work with larger onesworkpieces- Quiet running and precise cuts- Equipped with a powerful three-phase motor- The large dimensioned saw aggregateGray iron is doubly fixed to the cast iron table and isa guarantee for stability, precision, smooth running andlong lifetime- Maximum cutting height is also when installedscoring device reachedMade in ItalyEquipment details:Double cradle saw unit- Oversized, made of steel/cast iron- Close to the saw blade, supported on both sidesfor precision, smooth running and a long service life- Adjustable in height and up to 45° using a crank- Maximum cutting height is also when installedscoring device reached- Also available with scoring unittelescopic stop- Extendable telescopic stop up to max. 2550 mm- Angle adjustable- With professional stop flapsAluminum sliding carriage- With a thousand times proven ball contact system- Resistant to dust and dirtminimum point of contact between ball andtrapeze rail- 10-year Holzkraft guarantee against wear and tearguidewaysRip fence with round rod guide- With fine adjustment and quick release- Stable round rod guide made of ground45mm diameter steel- Foldable as standard for cutting large onesworkpiecesTechnical specifications:Dimensions and weightsWeight approx. 385 kgDust extraction connectionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmelectrical dataDrive motor power 5.0 kWConnection voltage 400 VFormat sliding carriage and tableFormat slide length 2600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 840 mmTable width 560 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 2310 mmtrimming length 2600 mmSaw blade inclination 90 - 45 °Max. cutting height 90° 90 mmMax. cutting height 45° 63 mmDiameter (main) saw blade 315 mmSpeed ??of (main) saw blade 4000 rpmPU 1Scope of delivery:Table extension and table wideningAnodized aluminum format sliding carriageAluminum folding stopsRip fence with round rod guide andfine tuningItem No. 5504326 Kwjdpfjvyupzjx Adwjt

Condition: used, mileage: 4,14,416 km, power: 70 kW (95.17 HP), first registration: 08/2014, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,665 mm, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, Equipment: ABS, airbag, central locking, Power/engine : 2.143 cm³, with turbocharger Axles : 4x2 Brakes : ASR, disc brakes Cab : Color glazing, El. window lifter, El. Exterior mirrors, Exterior temperature display Refrigerated body : Cold Car, Bunker doors/ice, 5 doors left, No. of doors right 5 doors Refrigeration unit : Cold Car, Eutectic storage cooling, Cooling down to -33 °C Other equipment : Power steering, Immobilizer ID: 117556 ATP 06/26 Front axle with increased load capacity Electronic Stability Program (ESP9i) Stabilizers HA reinforced under frame Stabilizer reinforced on front axle Spring and damper front reinforced Version for countries with small license plate Battery management Lockable glove compartment Storage above windscreen 6-speed manual gearbox ECO Gear Wheelbase 3665 mm 3,5 Tonner Speedometer km/h Seatbelt warning system for driver's seat Crosswind Assist Service interval display ASSYST Automatic headlight cut-off to parking light Adaptive brake light Daytime running light Pre-fitting electr. Scope for 3rd brake light Emission class Euro 5b+ N1 Engine OM 651 DE 22 LA 70 kW (95 hp) 3800/min Adjustable passenger seat Airbag driver Smoking package Plate cooling is a cooling system that uses eutectic plates to maintain a suitable temperature level. The passive plates are connected to the power supply (380V) overnight. The solidification point of the eutectic solution is -33°C. The eutectic plates are used to maintain the temperature of the already frozen product. We always have a large selection of used cooling and ice cooling vehicles in stock. You can find more from our range under Non-binding offer, sale only to traders, errors and prior sale reserved Advertisements and company logos on vehicles may have been digitally processed on photos Kwjdpfx Adsva R Exswet

Condition: used, mileage: 3,000 km, first registration: 10/2025, fuel type: diesel, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Vehicle No. for customer inquiries: 1522500091 *Former gross list price at time of delivery: EUR 420,721. You save 57% (EUR 241,031) Vehicle location: Hirschberg · Im Rott 1 · Tel. Vehicle whereabouts: AE Hirschberg * Arctic White Safety * Light sensor * Automatic high/low beam and cornering light * Electronic Stability Program (ESP) * Lane Keeping Assist * Attention Assist * Tire pressure monitoring * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Speed limiter 90 km/h / 56 mph, ECE Comfort * Automatic climate control * Auxiliary hot water heating, cab * Mercedes PowerShift 3 * Central axle trailer coupling, D50, Ringfeder * Traffic Sign Assist * Cruise control * Refrigerator on engine tunnel Media * Digital radio * Navigation system Technical Features * Straight front axle, increased ground clearance * Electric compressed air supply and control, medium * Secondary oil retarder * Rain sensor * Drive formula 6x4 * 26-tonner * Reversing camera, at rear of tractor unit * Front spring 7.5 t, 2-leaf * Rear spring, 2 x 10.0 t, reinforced * Body type: tipper/ tipper semi-trailer * Environmental badge (green) Interior * Rear underrun protection, foldable, steel tipper, test force 80% * Armrests, both sides, passenger seat Exterior * Roof hatch/ventilation flap Other * Front axle 7.5 t * Rear axle, crown wheel 300, planetary, 13.4 t * Axle ratio i = 4.333 * Heating, electronic compressed air supply unit * Disc brakes on front and rear axles * Fully protected disc brakes * Electronic parking brake * Condensate monitoring for compressed air system * Complete aluminium compressed air tanks * 2-line trailer brake * Fixing parts for tipper body * Bolted frame * Single-circuit steering * Regulated power steering pump * Stabilizer, front axle * Alu-mudguards, rear axle * Leather steering wheel * Compressed air connection in cab * Comfort driver's air-suspended seat * Passenger functional seat * Seat cover, Dinamica, black, driver seat * Seat cover, Dinamica, black, passenger seat * Side sunblind, driver's side * Residual heat utilisation * Storage compartment covers, driver and passenger side * Alternator 28 V/100 A * Automatic circuit breakers * Additional socket 12 V/15 A, passenger footwell * Switch No. 1 for external body electrics * Switch No. 2 for external body electrics * Night driving light switch * Reversing warning buzzer * Side module, N3G vehicle * Mirror cover, construction vehicle * M cab ClassicSpace, 2.30 m, 170 mm tunnel * M cab * Floor variant, 170 mm tunnel * Cab width 2.30 m * Cab, 600 mm mounting height * ClassicSpace * Cab suspension, comfort, steel-sprung * Cab tilting device, mechanical-hydraulic * Rear cab wall with window * External storage compartment flap, left * Tinted windscreen with band filter * Heated front mirror * Main mirror with manoeuvring position, passenger side * Air horns, cab roof * Bumper, corners in steel * Bumper, centre section with towing eyes, coupling jaw * Door extension * Driver cab entry left/right, movable * Entry step with roof handrail * Central locking system * 2 extra remote control keys * Transmission support arms, easy to remove * Predictive Powertrain Control Kwjdpfxsx T Ikwj Adwet * Driving program offroad * Single-plate clutch * PowerShift Advanced * Tachograph calibration, digital, ex works * Tubeless tires, 385/65 R 22.5 FA/FAL/RAL * Tipper chassis * Vehicle manufacturing plant: Wörth * Heavy-duty series, new generation from 18 t * Heavy vehicles from 18 t, O

Condition: new, Year of construction: 2025, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Kjdpfjwg Sgcex Adwswt Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: new, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, fuel tank capacity: 680 l, color: white, gearing type: mechanical, number of gears: 16, Year of construction: 2025, Equipment: air conditioning, cruise control, fog lights, trailer coupling, = Additional options and accessories = - Immobiliser - Spare wheel - Sun visor = Remarks = Model description: IVECO T-WAY Tractor 6×4 AT720T47TH GVW 26-38 Ton HP 470 R20Tyre MY25 Tractor Head Code Diesel Type: AT720T47TH GVW: 26-38 TON Fifth Wheel: Jost fifth wheel Rear Axle: HR-TP Tyres: 20497 - Tyres 12.00R20 Drive Hand: LH Drive engine power: C13-470 CV Headlamps Protection Roof Rotating LED lights 7+7 Pin Trailer plug Fuel Tank 680 LT Pneum. Horn-Chassis PTO pre - equipment Curtains on door windows 2 lowered bunks w/o prot net Heated Electric rear mirrors rear dampers Front multileaf susp Loads 7500-13000kgs Drive T. 12.00R20 EBS+BAS Safety Hor. Filter cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tank 90A alternator Standard Gear mode 08329 APU free discharge Horizontal batt side fram Manuals EMEA APAC STD Cab insulation Standard grey plastic part Mechanical cab suspension Manual Cab Tilt At lowroof cab Roof in Standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on cc Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 Mounting Plate H=16MM Rear anti roll bar Filter HP TR/No heat ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhand 785mm Bulb rear lights Electronic Battery cut off Emission Euro III Fabric Sta. 2 way Adj Pass Engine Plate Radiator Guard Provision Radio and CB Rear suspension no spacer Rear Axle ratio 4.23 Rear cross member Rear Multileaf Susp Rever Monotone buzzer Steel wheels Kodpfew Dukxex Adwowt Grey IC444 chassis Standard Cab Trim MPH/KPH speedometer Speed limiter 90KM/H Soft touch foam steering wheel With stickers 79240 Aux. Chassis for 5th wheel Pre heater Trattam Prot STD Towing version Trye inflation hose Vin Code check digit Warning Triangle Radice VIN WJM STD Setting C11/C13 Tryes 12.00R20 5th wheel 3 1/2" + moun. Plate Steel front bumper Front Anti Roll Bar

Condition: ready for operation (used), Year of construction: 2000, operating hours: 64,409 h, spindle motor power: 18,000 W, spindle speed (max.): 8,000 rpm, controller manufacturer: FANUC, number of axes: 10, This 10-axis Tornos-Bechler MultiDeco 26-6 was manufactured in 2000, featuring a max bar diameter of 26 mm and part length up to 120 mm per clamping. It operates with spindle speeds up to 8,000 rpm and a main spindle drive power of 18 kW. Consider the opportunity to buy this Tornos-Bechler MultiDeco 26-6 swiss type turning machine. Contact us for more information about this machine. Additional equipment • Back-working Capabilities: Yes Machine Benefits Technical Machine Benefits • Max. Bar diameter: 26 mm • Max. Part length: approximately 120 mm (per clamping) Extra Information Kwsdpfx Adsyairhewjt Machine still under power

Condition: ready for operation (used), Year of construction: 2006, This HOMAG KFL 526 / C was manufactured in 2006. A robust double-sided edgebander, it handles workpiece thicknesses from 12 to 40 mm and sizes up to 2500 x 1200 mm. Features include a gluing unit, profile trimming, and a finish unit for precise edge finishing. Ideal for efficient edge banding with speeds up to 35 m/min. Contact us for more information about this machine. Additional equipment • Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW • PUR Nordson Melting Station / Tool Set / Suction Tube Machine Benefits Technical Machine Benefits • Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg • Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm • Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm • Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Kodsx U Uzrepfx Adwowt • Minimum workpiece gap: 500 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, year of last overhaul: 2024, Four Corner Head Welding and CNC Corner Cleaning Line STURTZ SE - HSM 30/26 Compact. The whole line works properly and well. The equipment was operational up to its uninstallation. Kjdpfxov Uzr Es Adwswt

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 26 kW (35.35 HP), type of cooling: air, overall weight: 358 kg, total width: 1,150 mm, total length: 1,300 mm, total height: 1,600 mm, warranty duration: 6 months, heating capacity: 30 kW (40.79 HP), Aircooled Chiller/Heat pump Blue Box Epsilon Echos DK RF HP 26 kW Cooling capacity: 26 kW (12/7 — 35°C) Heating capacity: 30 kW (40/45 — 7°C) Year of manufacture: 2018 Options: Heat pump Heat exchanger: Plate Type of refrigerant: R410A Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Copeland (scroll) Number of fans: 1 pcs. high-pressure Dimensions: 1.30 x 1.15 x 1.60 m Weight: 358 kg Working hours: 3 h Condition: Excellent, new Kedpfx Adsx Ux T Sewowt

Condition: ready for operation (used), Year of construction: 1999, operating hours: 77,888 h, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, controller manufacturer: FANUC, controller model: PNC DECO, number of axes: 10, This Tornos Deco 2000-26 Lathe was manufactured in the year 1999 in Switzerland and has 77888 production hours. It is equipped with a TORNOS-BECHLER FANUC PNC DECO control unit and has 10 axis. The machine has a spindle speed of 8000 rpm main spindle and 6000 rpm counter spindle. It comes with a TORNOS ROBOBAR SSF-532 bar loader. Contact us for more information about this lathe. Additional equipment • Bar loader: TORNOS ROBOBAR SSF-532 • Some tool holders included and tool setting device is included in the offer Machine Benefits Technical Machine Benefits Kedpfx Asx D Ilgodwswt • Max. Bar diameter: 16 mm • Travel: 240 mm • C axis indexing precision: 0. 1 ° • Main spindle: 8000 rpm // counter spindle: 6000 rpm • Full documentation is available

Condition: used, • Model – Genius 37 CT-S Kwodpfxewz U Hbs Adwjt • Year of manufacture – 2007, serial number: 86592 • Max. glass size: 3300 x 2550 mm • Glass thickness: 3 – 19 mm • Can also cut shapes, offcut optimization, data input at the cutting table • With breaking bars and strong air cushions • Table can also tilt • Working height: 900 mm • Weight: 2600 kg

Condition: used, mileage: 1,08,325 km, power: 100 kW (135.96 HP), first registration: 06/2020, fuel type: diesel, overall weight: 3,300 kg, next inspection (TÜV): 09/2026, color: red, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Renault Master - 1 owner - Air conditioning - Reversing camera - 3 seats - 6-speed manual transmission - Partition wall - Glazed sliding door - Service history - TÜV (roadworthiness certificate) valid until 09/2026 Special equipment: - Rear parking assist with reversing camera - Rear wing doors with glazing - Full wheel covers - Spare wheel with road tyres Kwjdpfsycpclox Adwet - Glazed sliding door on the right for loading/passenger compartment - Rear entry step - Side tie-down rings in the cargo area Additional features: - Overhead storage shelf - Driver's airbag - Electrically adjustable and heated exterior mirrors - Outside temperature display - Brake assist - Rev counter - Electronic brake force distribution - Cabin pollen filter - Bodywork: standard high-roof van - 105-litre fuel tank - Radiator grille with chrome surround - Load compartment partition - Height-adjustable steering column (steering wheel) - Facelift (2) - Engine: 2.3L - 99 kW dCi diesel CAT - Wheelbase: 3682 mm - Low-emission as per Euro 6d-TEMP standard - Gearshift indicator - Front mud flaps - Side protection strips - Seat upholstery: fabric - Cab seating: multifunctional dual passenger seat - Cab seating: height-adjustable driver’s seat - LED daytime running lights - Tie-down rings on cargo floor - Heat-insulating glazing - Permissible gross weight: 3.30 tonnes

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: 6 sets of top jaws for key bar chucks, helical toothed -Jaw width: 26 mm -Dimensions: see photo technical drawing -Shipping/Price: complete -Dimensions total: 285/240/H85 mm Kedpfoww Axdox Adwjwt -Total weight: 24.4 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts -Type: Secodex R220.13-8250-C -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Number: 2x milling head available -Price: per piece Kwsdpfsu Ricusx Adwst -Dimensions: Ø 260 x 60 mm -Weight: 14.1 kg/piece

Condition: used, Flange connection, V-flange -Weld neck flanges. 183 pieces -Type: DIN2633 / EN1092 26 different versions see photos parts list Kwedpfx Adoq N E Rqewjt -Price/tax: complete -Weld neck flanges: please inquire about other sizes in stock -Transport dimensions: 1200/800/H540 mm -Weight: 533 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts Kjdpeu Ricnefx Adwswt -Type: Secodex R220.13/23-8250-C -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Dimensions: Ø 262 x 60 mm -Weight: 14.1 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts Kwodpfx Aou Riczsdwet -Type: Secodex R220.13/23-8250-C -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Dimensions: Ø 262 x 60 mm -Weight: 14.2 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks Kwsdpfjxdip Hsx Adwst -Top jaws: hard top jaws for key bar chucks, helical toothed -Jaw width: 26 mm -Dimensions: see photo technical drawing -Dimensions total: 115/78/H70 mm -Total weight: 3.2 kg

Condition: good (used), functionality: fully functional, mileage: 6,20,000 km, power: 324 kW (440.52 HP), first registration: 02/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, next inspection (TÜV): 08/2024, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel, Year of construction: 2011, Equipment: ABS, air conditioning, airbag, Used truck MAN TGX 26-440 caisson + tarpaulin, 3 axles 6X2, year February 2011, big cab with 1 sleeping place, manual transmission ZF 16 gears, climate, centina cover/scope + lift/lower, webasto, intarder, ABS, euro 5, caisson length 7.300mm, wheelbase 4.500mm, total length 9.755mm, total weight 26,000kg, payload 15,500kg, 3rd liftable + steerable axle, 1st front axle leaf springs - 2nd+3rd rear axles pneumatic, tires 70% tire size 315/80 R 22.5, sunshade, electric windows + mirrors, radio, 620,000km, good condition. INFO ENG: Used truck MAN TGX 26-440 with box + tarpaulin, 3 axles 6X2, first registration 2011, large cabin with 1 bed, 16-speed ZF manual gearbox, air conditioning, cover/uncover + raise/lower curtainsider, webasto, intarder, ABS, euro 5, box length 7,300mm, wheelbase 4,500mm, total length 9,755mm, total weight 26,000kg, payload 15,500kg, 3rd liftable + steering axle, 1st front axle leaf springs - 2nd + 3rd rear axles pneumatic, 70% rubber, tire size 315/80 R 22.5, sunshade, electric windows + mirrors, radio, 620,000km, good condition. Kodpfx Astzyydsdwjwt

Condition: good (used), Used ZORZI 26 R BOB demountable trailer, 3 axles with 12 tires, year 2012, tire size 265/70 R 19.5, tires 60%, total weight 26,000kg, payload 21,320kg, ABS, pneumatic suspension, ROR axle type, total length with drawbar 9,350mm, good state of 'use. Kwjdpfx Adsuizihswjt INFO ENG: Used trailer ZORZI 26 R BOB hook lift trailer, 3 axles with 12 tires, first registartion 2012, tire size 265/70 R 19.5, 60% rubberised, total weight 26,000kg, payload 21,320kg, ABS, pneumatic suspension, ROR axle type, total length with drawbar 9,350mm, good condition.

Condition: good (used), Year of construction: 2010, functionality: fully functional, With the following equipment: - Travel: 400 x 350 x 350 mm - Table: 575 x 500 mm Kjdpfx Aouzhdxedwewt - Workpiece weight: 700 kg - Genius 700 generator - 75 ampere generator output - Rotating spindle - Internal controlled heat exchanger - Kraft & Bauer fire extinguishing system - Suction device - Control unit for automated or manual pallet carriers - EROWA quick-action chuck IST - O-module - 24-fold electrode changer (changer is on the right - machine operation on the left) Attention picture similar - changer is on the right - machine operation on the left

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, Automation cell consisting of a Zimmer & Kreim Genius 700 die-sinking EDM system and the Chameleon handling system *With the following equipment:* - Travel: 400 x 350 x 350 mm - table: 575 x 500 mm - Workpiece weight: 700 kg - Generator Genius 700 with automation Chameleon - 52 amps generator power - Rotating spindle - Internal controlled heat exchanger - Fire extinguishing system Kraft & Bauer - Extraction unit - Control unit for automated or manual pallet carriers - EROWA quick-action chuck ITS Automation system Chameleon with: - Chameleon base unit - 2 x rails - 2 x magazine - 195 electrode positions ITS EROWA - 10 UPC pallet places EROWA or PARTOOL - 1 loading drawer - identification system - EROWA double rotary gripper ITS - EROWA pallet gripper UPC / PARTOOL Kwedjiix R Sopfx Adwjt Process control system - JOBmodEDM - PROGmod - Comfort database - IDENTmod - SUPmod Transport, IBN & training at cost Well? Who would rather start eroding and automating today than tomorrow?