Used Pvc Cutter Machine for sale (65,086)

Condition: used, Year of construction: 1977, max. grinding diameter 400 mm grinding width 0 mm max. module Bdsdst Hwnvjpfx Amnsd min. module total power requirement 3 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunately the machine does not have many accessories. It would therefore be a good investment as a second machine if you already have suitable accessories available.

Condition: used, Year of construction: 1994, workpiece diameter 110 mm grinding length 410 mm clamping length 20 mm total power requirement 0,25 kW weight of the machine ca. 500 kg Bdedot Hw Nmjpfx Amnjd dimensions of the machine ca. m Profile Tool Grinder for Chamfer Angles, accessories

Condition: used, Year of construction: 1982, x-travel 0 mm y-travel 0 mm table length 600 mm table width 400 mm total power requirement 2 kW Bsdpfx Amjt Hwr Uonjdd weight of the machine ca. 1500 kg

Condition: used, Plasma cutting unit HYPERTHERM, Type Max 100 Plasma cutter with machine torch Machine No. 70-2513, Year of manufacture 1990 Power: 100 Amps = 80% duty cycle 89 Amps = 100% duty cycle Cutting capacity: up to 32 mm material thickness Adjustment range: stepless Hose package length: 22 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 63 Amps plug - Hose package with machine torch (hand torch without switch) - Spare nozzles for the plasma cutting torch - Separate push button switch for starting the plasma cutter Space requirement L x W x H: 850 x 700 x 1100 mm Weight: 225 kg Bsdpjyah Sasfx Amnsdd Good condition Ideal for retrofitting to an oxy-fuel cutting machine.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Bodpfxjy Umkfj Amnjdd Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Year of construction: 2005, condition: good (used), machine/vehicle number: 8382, 2-head welding machine for PVC profiles Bsdpfozdq Ttjx Amnsdd

Condition: refurbished (used), Trenching machine The machine was completely overhauled approximately 1000 meters ago! Bedpfx Amozcnxljnodd I have videos that I could send to a phone number via WhatsApp!

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: Parmel_042026PA, type of input current: three-phase, total width: 2,504 mm, total length: 5,768 mm, input voltage: 400 V, feed length Y-axis: 2,500 mm, working width: 1,800 mm, total height: 1,330 mm, repeat accuracy: 0.01 mm, cutting width (max.): 1,600 mm, cutting height (max.): 50 mm, compressed air connection: 4 bar, BUFFALO Cutter – Fabric & Textile Cutting Machine Our BUFFALO Cutters are the ideal solution for the precise cutting of textiles, leather, technical fabrics, and composite materials. With state-of-the-art CNC technology, they guarantee: • Highest cutting precision for patterns, prototypes, and series production • Flexibility for different materials and formats • Efficiency through short setup times and automated processes Whether in the fashion, furniture, or automotive industry – our fabric & textile cutting machines deliver perfect results with maximum productivity. Model PC W16L25 • Single-layer cutting up to 50 mm height • Working area (W × L): 1600 mm × 2500 mm • 2 cutting heads, double cutting head, needle punch, and plotter pen holder • Tool kit: ERT, EOT, VPT (electric rotary knife, oscillating knife, punching module) • KIS (Knife Initialization System) • Vacuum pump • Air compressor Bodezf Ifvspfx Amnodd • Passive roller feeder for non-elastic fabrics • Parmel Cutting Software • 12 months warranty We offer installation, training, spare parts, consumables, and guarantee smooth operation both during and after the warranty period.

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm Bdedpfx Aeyxy S Remned - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The Trimmer 2A is a CNC corner cleaning machine for PVC window frames, equipped with 2 interpolated axes and an automatic cycle. When properly configured, it is able to check the dimensions of the workpiece. It is fitted with a 275 mm diameter blade, which allows, through different machining programs, the cleaning of the external corner on various profiles. The Trimmer 2A also features upper and lower units with blades for cleaning the bead seams, as well as upper and lower units with knives for cleaning internal corners. Cleaning of both internal and external corners can be completed using the upper and lower drilling/milling units for cleaning the corners or the gasket seats. The processing units can be programmed independently via a CNC PC, which controls the profile programming and the machine’s operation, in either manual or automatic mode. Bodpfsw Hk T Uex Amnjdd

Year of construction: 2014, condition: used, Automatic cutting machine for PVC profiles loadingtabel for 6500 mm lenght unloading table Labelprinter Sawblade diameter 500 mm cuttinge angles -45°/90°/+45° Bsdpexb U N Hjfx Amnjdd

Condition: used, 1 used engraving cutter grinder Manufacturer: Deckel Model: SOE with optics Year of manufacture: 1988 Technical specifications: Bdsdpfx Ameyl Iipjnod Motor speed: 2800 rpm Grinding spindle speed: 4500 rpm Drive power: 0.55 kW / 380 Volt Weight approx. 200 kg Accessories and equipment: Collets Optical system Machine base / pedestal Tools

Condition: as good as new (ex-display), Year of construction: 2012, operating hours: 10 h, Kilia 65 Liter Meister Plus Vario Condition: Factory Refurbished Warranty: 6 months manufacturer's warranty Manufacturer: Kilia General Description The Kilia 65 L Meister Plus Vario is a high-performance universal chopper for the production of fine and coarse sausages, emulsions, as well as vegetarian and vegan products. The machine is made entirely of stainless steel and meets the highest hygienic and technical standards. By using modern, energy-saving frequency converters in the drive technology, the machine enables precise control of the speeds while simultaneously reducing energy consumption – ideal for economical and sustainable production. Bdsdpfxozcuzmo Amnod Equipment, Knife Head: 6 knives Equipment, Chopper: Infinitely adjustable knife shaft drive: Forward: 50–5100 RPM Reverse (mixing mode): 50–500 RPM Bowl drive: 7–20 RPM Electronic central lubrication for knife and plate shaft bearings Noise protection cover and knife cover, manually operated, stainless steel Electric knife shaft brake Temperature-dependent end switch Cycle counter-dependent end switch Operation: Touch display with splash guard Operation: Button panel Drive power, knife shaft: 22 kW, 400 V (frequency converter controlled) Drive power, bowl: 1.5 kW, 400 V (frequency converter controlled) Integrated online service module for remote maintenance Dimensions and Weights Weight: 850 kg Dimensions: Diameter 1150 mm, Height 1160 mm, Height with knife cover open 1510 mm Scope of Delivery Kilia 65 L Meister Plus Vario – New Machine Standard Accessories: Wrench for knife head, cleaning brush, scraper Technical documentation

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle Bodpfxoyah R Ne Amnsdd 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: used, Application: Woodworking Bsdpovy Apiofx Amnsdd Diameter: Various Weight: 12 kg Length: Various Shank: Various As-new, unused, sharpened, and used shank cutters and drills for CNC machines as exemplarily shown.

Year of construction: 1980, operating hours: 36,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11360, Looking for a reliable, cost-effective solution? This used extruder machine offers excellent performance at a fraction of the cost of a new model. Well-maintained and fully functional, it’s perfect for processing PVC. Ideal for manufacturers seeking to expand production without breaking the budget. Contact us now for more details! Bdodpfx Amjvuquvened

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 301 PVC CAM Çıtası KESME MAKİNESİ, • Conforms to CE standards. • 45-degree cutting capability for PVC glazing bead profiles. • Automatic operating system. • 2.5-meter conveyor system for long frames. • Adjustable cutting speed. • Pneumatic profile clamping system. • Saw blade diameter Ø200 millimeters. OPTIONS • Left conveyor attachment capability. • Notching saw. • Connectivity for digital meter. Bdedpfx Amoq U Tbksnod • Capability to connect a Bluetooth measuring station.

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Bodjwdutmepfx Amnedd Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers Bdodjy Rumyepfx Amned - maintenance tools - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Bedoy Rummjpfx Amnsdd Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: – Pneumatic clutch and brake Bdsdpey Rumaofx Amned – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection Bodpfx Aoy Rulvemnedd – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: good (used), functionality: fully functional, Year of construction: 2005, It is important to know that a total of two welding machines and two CNC corner cleaning machines are available, comprising two complete production lines. The machines are operational and still in daily use. CE Conformity: Yes (CE marking on the machine) Power supply: 400 V Frequency: 50 Hz Current connection: 25 A Main switch: Industrial main switch with safety interlock Operating air pressure: 7 bar Main components - 4 welding heads - Linear motion system - Profile clamping units - Welding plate system - Pneumatic press units - Electronic temperature control Bjdpfx Aeyyavromnodd - Central control unit - Safety light curtain Operation Profile clamping – Insertion of the heated welding plate – PVC melting – Application of welding pressure – Welding cooling – Removal frame The system operates semi-automatically/automatically. ``` Includes: - Automatic head positioning - Pneumatic clamping system - Digital temperature control - PLC control - Operator panel and industrial PC Control system Industrial PC control Safety system - Light curtain - Emergency stop button - Safety covers - CE conformity Powered up in Hungary, the system can be dismantled and delivered in approximately June.

Year of construction: 2016, condition: used, Manufacturer: Emmegi S.p.A. Machine: PVC Corner Cleaning Machine Model: Trimmer E Year of manufacture: 2016 CNC corner cleaning machine for PVC frame corners, with 3 interpolated axes and automatic cycle. It is equipped with a 300 mm diameter blade that allows, through different machining programs, the cleaning of the external corner of various profiles. Weight: 600 kg Air pressure: 6 – 7 bar Bdedpfx Aoywu A Ijmnod Motor: E48 63/2 Speed: 2850 1/min Power: 3.5 kW Current: 6 A Power supply: 400/3 V Frequency: 50 Hz

Condition: used, Year of construction: 2001, Rotary die-cutting machine, model BRS-320-D20-U800, with accessories Production direction: right to left Strip infeed basket with strip guide Driven feed, lower roller driven Upper roller adjustable manually Internal lateral strip guides 2 rotary die-cutting heads, quick-change system, many adjustment options 4 rotary die-cutting stations, for changing Strip outfeed basket Scrap conveyor Wheel displacement for transferring material from the machine line to rollers Protective covers with safety interlocks Includes die-cutting tools Includes control system and operator panel Includes electrical documentation Includes original documentation All plug connections use Harting connectors This machine was used to punch C-rails and DIN rails from 2-3 mm sheet metal. It operated flawlessly in production at the customer's plant until it was dismantled. Bedpfx Aoy Szlxjmnedd We can provide support for integrating the machine into an existing profiling system or other applications.