Used C Fold for sale (56,304)

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, brakes: retarder, color: white, gearing type: automatic, number of seats: 23, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Iveco Daily New Vehicle, Stock Vehicle, Immediately Available for Delivery at Special Price / Special Offer - Length: 7618 mm - Width: 2174 mm - Height: 2900 mm - Wheelbase: 4100 mm The base vehicle is extensively equipped, including: - Air suspension - Telma retarder Bljdj Ag Ddaopfx Aktjp - Additional hot water heater - Automatic air conditioning - 8-speed automatic transmission - GSR systems - Air-cushioned driver's seat with seat heating Interior conversion/modifications as follows: - Thermal and acoustic insulation - Electrically operated external swing door - Webasto RT 145 air conditioning (dual climate control) - Ceiling duct left and right with service sets - Multi-stage night lighting - Half-level podium/no wheel arch in passenger area - Deepened luggage compartment - 22 passenger seats, GRL, adjustable backwards, with magazine net and folding table - Tour guide seat - USB ports in every passenger row - Clock in passenger compartment Net export possible

Condition: used, Vötschtechnik Climate test chamber / Temperature test chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate test chamber, water-cooled For sale is a used climate test chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate test chamber / Temperature test chamber Year of construction: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ±1 to ±3 % RH Temperature deviation (time, climate operation): ±0.1 to ±0.3 K Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Bodpfx Akezznx Iotjlp Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Stainless steel interior Large viewing window Interior lighting Water-cooled version Side cable entry Multiple shelf levels Ethernet interface USB interface Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate test chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Hardy Type: Hardy TH453-W2E-II Never used (exhibition model) Water-cooled Here we offer an unused Hardy duplex climate chamber for temperature and humidity testing. The system has two test chambers arranged in a common housing. Both test chambers can be operated independently. This allows two different tests to be carried out simultaneously. Bsdpfx Akezv Rrmotslp The climate chamber is prepared for testing with lithium-ion batteries and is particularly suitable for batteries from power tools, e-bikes and comparable applications. Technical data Number of test chambers: 2 Operation of test chambers: independently of each other Test chamber volume: approx. 300 liters per test chamber Test chamber dimensions per test chamber: 850 × 600 × 600 mm, width × depth × height External dimensions: 1,150 × 2,115 × 1,922 mm, width × depth × height Temperature range: -45°C to +100°C Temperature deviation: ±0.5°C Temperature change according to data sheet: Heating rate ≥ 2°C from +25°C to +100°C, empty and non-linear Cooling rate ≥ 2°C from +25°C to -45°C, empty and non-linear Humidity range: 20% RH to 98% RH Temperature range during humidity operation: +20°C to +85°C Condition: New Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch   Temperature Shock Chamber / 2-Chamber Shock Test System   Vötsch VT³ 7012 S2 Temperature Shock Chamber Warm chamber +50 °C to +220 °C / Cold chamber -80 °C to +70 °C 125 liter test chamber volume – Year of manufacture 2018 – water-cooled version   For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH.   The system is used for performing rapid and shock-like temperature changes and is particularly suitable for environmental simulation, Environmental Stress Screening (ESS), quality assurance, as well as stress and reliability tests of electronic components, assemblies, and other test specimens.   The VT³ 7012 S2 operates according to the 2-chamber principle with a warm and cold chamber. The test specimen is transported between the two temperature zones in a vertically moving test carriage and is thus subjected to rapid temperature changes.   Technical data:   Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Device type: Temperature shock chamber / 2-chamber shock test system Year of manufacture: 2018 Made in Germany   Test chamber volume: 125 liters Number of chambers: 2 Temperature range warm chamber: +50 °C to +220 °C Temperature range cold chamber: -80 °C to +70 °C Max. test weight / test carriage load: 50 kg Refrigeration unit: water-cooled Bodpfx Ajzzazuoktjlp   Refrigerant 1: R449A Refrigerant quantity: 1.70 kg GWP: 1,397 CO₂ equivalent: 2.37 t Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g   Refrigerant 2: R23 Refrigerant quantity: 1.27 kg GWP: 14,800 CO₂ equivalent: 18.80 t Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Operating pressure: 14 bar g   Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A   Test chamber dimensions (W × D × H): 470 × 650 × 410 mm External dimensions (W × D × H): 970 × 2,350 × 1,985 mm Required room height for operation: approx. 2,450 mm Weight: approx. 1000 kg   Equipment:   2-chamber temperature shock system Vertically moving test carriage Programmable touch panel control CONTROLPAD for status display Temperature control Test chamber lighting Observation window Pipe connection Water-cooled refrigeration unit Automated and programmable defrost cycles Operating hour counter Cycle counter / remaining runtime display USB and Ethernet interfaces   Areas of application:   Temperature shock testing Environmental Stress Screening (ESS) Environmental simulation Electronics and component testing Assembly testing Material testing Quality assurance Research and development Reliability testing Lifetime and stress tests   Condition:   Used Optical condition as shown in the pictures   Scope of delivery:   1x Vötsch VT³ 7012 S2 Temperature shock chamber Touch panel control Equipment and accessories as shown in the pictures   Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Shipping by freight forwarder is possible. Subject to change, errors and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, machine/vehicle number: 008555, Type of edging: Thin edge, Thick edge Bjdpez N Swvofx Aktelp Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Maximum panel thickness: 50 mm Operating Units: 6 nr

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 11/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Are you looking for a different model, engine variant, dimensions, or additional specifications? Please feel free to contact us. We offer financing and leasing at attractive conditions – also available for the Netherlands, Austria, and newly established businesses! --- Vehicle Specifications: * Wheelbase: 4,100 mm * 6-speed manual gearbox * Single cab * Twin rear wheels * Gross weight: 7.2 tonnes * Digital tachograph * Speed limiter: 90 km/h Interior: * Luxury driver’s seat, suspended and heated * Grab handle on A-pillar * Comfort head restraints * Leather multifunction steering wheel * Fabric seat upholstery Safety & Assistance: * ESP (Electronic Stability Program) * AEBS + City Brake (Advanced Emergency Braking System) * Driver’s airbag * MOIS (Moving Off Information System) * Electronic operation & maintenance manual * Rear parking sensors * Lane centering assist Plus (LC) * Eco-Smart function * Driver drowsiness alert (DDAW) * Turn assist, passenger side (BSIS) * Rear blind spot radar * Traffic sign recognition with ISA (Intelligent Speed Assistance) * Spare wheel Wheels & Technology: * Electrically adjustable & heated mirrors * Digital radio DAB with 7" touchscreen * Apple CarPlay/Android Auto * All-weather tires * AIRPRO air suspension, rear axle * Air conditioning with climate control * Heated fuel filter * Auxiliary hot water heater Bodpfowfbckex Aktslp * Light and rain sensor * Fog lights * Full LED headlamps * 4G connectivity box incl. TCO * Adaptive cruise control (ACC) * Toll system preparation (OBU-ready) * 20-liter AdBlue tank & driver’s heating * Integrated 90-liter fuel tank Refrigerated Box: * Insulation: 80 mm / 100 mm * Anti-slip floor surface * Reinforced floor * Two rear doors with individual locking and 270° opening angle * Side door with individual lock and entry step * Combination lashing rails (1 left & 1 right) * 1 lashing strap * Interior and exterior LED lighting * Roof spoiler * Drain holes at the front of the box * Double sealing system on loading openings * Rear-view camera * Side underrun protection * Aluminium wheel protection with mudguards * Side marker lights Refrigeration Unit: * Thermo King V500X (-20°C to +20°C) * In-transit and stationary cooling * With heat pump * Temperature recorder (thermograph) * ATP certificate available Additional extras for the body are available at extra cost. --- Note: Please call before visiting so we can ensure your intended vehicle is on-site. If the vehicle is not located in Wachtendonk, we can deliver from our stock. Custom-built configurations available upon request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing or typographical errors. Subject to alteration and prior sale. Kind regards, Pimenta Automobile

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 11/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Are you looking for a different model, a different engine, different dimensions, or something else? Please feel free to contact us. We offer financing and leasing at attractive terms - also for the Netherlands, Austria and for start-up companies! ----Vehicle: IVECO Daily 70C18 * 176 hp (129 kW) Euro VI-E diesel engine * HI-MATIC 8-speed automatic transmission * Wheelbase: 4,100 mm * Rear-wheel drive * Twin tires on rear axle * Permissible total weight: 7,000 kg * Air suspension on rear axle * Standard suspension on front axle * C-profile steel ladder frame * Rear axle ratio i = 4.23 * Fuel tank 90 liters * AdBlue tank 20 liters * Tires 225/75 R16 all-season tires * Steel rims Technology / Comfort:?Luxury driver's seat * Hydraulically sprung driver's seat * Seat heating for driver * Armrest for driver's seat * Lumbar support for driver's seat * Rear wall insulation * Cab rear wall with window * Roof storage compartment above the windshield * Electrically adjustable and heated exterior mirrors * Electric windows * Central locking with remote control * Light and rain sensor * High beam control * Comfort noise insulation * Grab handle on the A-pillar * Seat covers, fabric * Bodybuilder interface * CAN-BUS 2.0B * Electrical preparation for tail lift * Switch for body lighting * Trailer socket 12V / 13-pin * Rear view camera * Additional vehicle key with remote control * Connection 12V for windshield OBU * Smoker's package * Battery 12V / 105 Ah (AGM) * Generator 3,500 watts (250 A) * Aluminum radiator * Heated fuel filter * Crankcase ventilation, heated * Diesel particulate filter * HVO/GTL fuel approval * Exhaust pipe, centered under the vehicle Safety: ESP * AEBS + City Brake * Turning assistant (BSIS) * Blind spot radar * Pre-collision monitoring (MOIS) * Proactive lane keeping assist (ELK) * Traffic sign recognition (ISA) * Extended driver attention warning * Front airbags, driver & passenger * Seatbelt pretensioner, passenger * Seatbelt warning system, driver & passenger * Tire pressure monitoring system (TPMS) * Speed limiter 90 km/h * Additional speed limiter * Daytime running lights * Accident data recorder * Warning triangle * First aid kit * Hazard warning flasher * Preparation for alcohol interlock * Wheel chocks (2 pieces) * Side marker lights * Splash flaps, front axle COMFORT PLUS package:?10" MyIVECO infotainment with navigation Bedpfxozu Ul Uj Aktjlp * Alexa voice assistant * USB sockets, driver and passenger side * Passenger seat bench with multi-function storage and storage compartment * Fog lights * Automatic climate control * Pollen filter * Outside temperature display * Adaptive cruise control (ACC) * Air conditioning compressor 170 ccm * Comfort headrests STYLE package:?Full-LED headlights * Leather steering wheel * Radiator grille with chrome inserts Infotainment:?AIR PRO controls * Connectivity Box 4G * Digital tachograph 4.1 Other: White (IC 194) * Daily model year 2026 * Homologation for goods transport * Easy Daily App * Vehicle monitoring & remote assistance * Over-the-air updates * Electronic operating and maintenance manual (Iveco Easy Guide) Refrigerated box: * Insulation 80mm/100mm * Floor surface, non-slip * Aluminum floor * Two rear doors with independent lock and 270° opening angle * Side door with independent lock and step * Combination anchor lashing rail (1 left & 1 right) * 1 lashing strap * Interior and exterior lighting, LED * Roof spoiler * Drain holes

Condition: used, mileage: 150 km, power: 120 kW (163.15 HP), first registration: 11/2026, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,500 mm, loading space width: 2,100 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Are you looking for a different model, engine type, dimensions, or other specifications? We offer financing and leasing at attractive conditions – also available for Austria, the Netherlands, and new business founders! Vehicle: * Wheelbase: 3640mm * 6-speed manual transmission * Single cab * Twin rear tires * Gross vehicle weight: 5 tons * Digital tachograph 4.1 * Speed limiter 90km/h Technology/Comfort: * Infotainment Composition * Apple CarPlay / Android Auto * 10" Touch-color display * Navigation system * 4 speakers * Bluetooth * Digital radio DAB+ * 12V socket in the center console * 2x folding keys with remote control * 4x USB-C ports * App-Connect Wireless (or via cable) * Manual air conditioning * Double passenger seat with storage compartment * Digital cockpit * Automatic windshield wiper control * Cruise control * Fuel tank 75L * Reinforced front axle * Central locking with keyless start * Storage package 2 * Lockable, illuminated glove compartment * Preparation for We Connect & We Connect Plus * Electrically adjustable and heated exterior mirrors * Multifunction steering wheel * Driver's seat "Comfort" Safety: * Summer tires * Front airbags for driver and passenger * Front Assist * Lane keeping assist * Hill start assist * Side marker lights * Electronic immobilizer * Direct tire pressure monitoring system * Tool kit and jack * Daytime running lights * Spare tire * Parking assistance front and rear * Driver fatigue detection * Emergency call system "eCall" * Start-stop system * Electric parking and emergency brake * Reversing warning sound * Extended exterior mirrors Refrigerated box: * Insulation 80mm/100mm * Non-slip floor surface * Reinforced floor * Two rear doors with separate locking system and 270° opening angle * Side door with separate locking system and step * Combination anchor lashing rail (1 left & 1 right) * 1 lashing strap * Interior and exterior lighting LED * Roof spoiler * Drain holes in the front of the box * Double sealing system at the loading openings * Side underride protection * Wheel protection Refrigeration unit: * ThermoKing V500X (-20°C to 20°C) * Driving and stationary cooling * Thermograph Bedpfx Akoy Trq Ijtjlp * ATP certificate possible Tail lift: Dhollandia * DH.LM10 * Load capacity 1000kg * Platform depth 1800mm * Roll-off safety * LED warning light * Remote control with spiral cable * Trailer coupling 3.5t trailer load (trailer coupling ball, trailer coupling socket 12V 13-pole) Additional extras for the body can be obtained for an extra charge. Note: Please call briefly before your visit – we will ensure that your desired vehicle is on site. If it is not in Wachtendonk, we will gladly deliver it from our stock. Customized bodywork possible on request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale are reserved. Best regards Pimenta Automobile

Condition: used, Vötschtechnik Climate testing chamber / Temperature testing chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate testing chamber, water-cooled For sale is a used climate testing chamber from Vötschtechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate testing chamber / Temperature testing chamber Year of manufacture: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (over time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (over time): ±1 to ±3 % RH Temperature deviation (over time, climate operation): ±0.1 to ±0.3 K Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Interior made of stainless steel Large viewing window Interior lighting Water-cooled design Lateral cable entry Multiple shelf levels Ethernet interface USB interface Accessories as shown in the pictures Applications Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Visual condition as shown in the pictures Scope of delivery 1x Vötschtechnik ClimeEvent C/340/70/5 climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items not explicitly mentioned in the photos are not part of the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone. Blsdpfx Akjzrwyiotop

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VCS³ 7034-5 Climate testing chamber Water-cooled With a temperature change rate of 5 K/min For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Bedpezpihasfx Aktelp Device type: Climate testing chamber / Temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7.0 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±2.0 K Climate range (temperature): +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittent) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Equipment: S!MPAC control system Touch panel operation Stainless steel interior Temperature and humidity control Ethernet interface USB interface Cable gland 50 mm Cable gland 125 mm Test object protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Vötsch VCS³ 7034-5 Climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / temperature testing chamber Vötsch VCS³ 7034-5 climate testing chamber Water-cooled With a temperature change rate of 5 K/min Bledpfx Asz Akcfoktop For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 7.0 K/min Temperature change rate, cooling: approx. 8.0 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Climate range, temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittently) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Equipment: S!MPAC control system Touch panel operation Interior made of stainless steel Temperature and humidity control Ethernet interface USB interface Cable entry 50 mm Cable entry 125 mm Test specimen protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Visual condition as shown in the pictures Scope of delivery: 1x Vötsch VCS³ 7034-5 climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful check Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Equipment: compressor, Technical specifications & equipment: Bjdpfx Aez Rkqdsktslp - Model: Heidelberg Stahlfolder KH82 - Year of manufacture: 2009 - Feeder: Pallet feeder PFH82 (for efficient and dust-reduced paper feeding) - 1st folding section: 6 pockets - 2nd folding section: 2 knives - Optional / upon request: Delivery table TSH100 available Note: A mobile knife folding section is also in stock and can be purchased for an additional charge.

Condition: used, TIRA Climate simulation chamber / walk-in climate test chamber TIRA TCZ 4022 S -2K Air-cooled | -40 to +140 °C | Refrigerant R449A For sale is a used, walk-in climate simulation chamber from the manufacturer TIRA. The system consists of an insulated test chamber, an air handling unit, external humidification, a machine unit and a control cabinet. It is used for temperature and humidity testing. Technical data: Manufacturer: TIRA Type: TCZ 4022 S -2K Cooling type: air-cooled Temperature range: -40 to +140 °C Temperature stability, supply air: over time ≤ ±0.5 °C; spatially ≤ ±1.0 °C Heating / Cooling: approx. 2 K/min each (-30 to +85 °C, without test item and thermal load) Climate range: +10 to +90 °C Humidity: 10 to approx. 95 % RH Dew point: +5 to +89 °C Humidity stability, supply air: over time ≤ ±2.5 % RH With heat compensation up to 16 kW: +15 to +80 °C; 15 to approx. 80 % RH Dew point: +10 to +74 °C Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm External dimensions: approx. 2660 x 6460 x 2800 mm Door opening (W x H): 2260 x 2260 mm Climate module KB 127: 1700 x 800 x 1400 mm Control cabinet: 800 x 500 x 2000 mm Bljdpsz Sn Uvefx Aktep Power connection: 400 V, 3/PE/N, 50 Hz Rated power: 95 kW; Rated current: 150 A Fuse rating: 200 A, slow-blow Total weight according to specifications: approx. 5834 kg Equipment: Stainless steel interior and floor Double-wing door with viewing window approx. 1000 x 1000 mm Supply air at the top / exhaust air at the bottom on the rear wall Electric heating, direct cooling and dehumidification Bitzer 6G-30.2Y; Refrigerant R449A; Oil SEZ 32 Steam humidifier EDB 40 4 test chamber spotlights à 500 W Insulation: 80 mm PUR and 120 mm mineral wool Floor load: 15,000 N/m²; Wheel load: 1,500 N/wheel (≥ 4 cm²) Application areas: Temperature and climate testing Environmental simulation Material and component testing Quality assurance and development Condition: Used Optical condition according to pictures Scope of delivery: TIRA TCZ 4022 S -2K with associated components as shown in the pictures Items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2001, spindle bore: 150 mm, spindle motor power: 95,000 W, total height: 3,800 mm, total length: 16,000 mm, total width: 5,000 mm, overall weight: 80,000 kg, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm Bodpfx Aoz Sy Twjktjlp DBC Turning Length: 8000mm Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2017, condition: like new (used), machine/vehicle number: 81100543, The machine is ready for operation and has only been in use for 3 years since its purchase. The device was installed in a production line for soups in 220 ml to 360 ml packages. Production series: SC-3000-XXX Scanning width: 320 mm Optical resolution: 1 pixel = 0.16 mm Rated voltage: L1/N/PE 230V AC Rated frequency: 50 Hz (+/-2%) 1.6 kVA Connected load: 16 A Protection class: IP65 Lamp type: MXR-160HP/20 Operating temperature range: 5°C - 40°C Machine weight: 420 kg Length: 1750 mm Depth: 720 mm Height: 2290 mm EU Declaration of Conformity Bledpfx Akjzrh D Sjtjp Option to start the machine on-site.

Condition: used, BOGE Screw compressor / Industrial compressor BOGE C 9 Screw compressor – 7.5 kW – 10 bar – 1,060 m³/min For sale is a used screw compressor from the manufacturer BOGE, model C 9, manufactured in 2017. The compressor is suitable for supplying compressed air to machines, workshops, production facilities, and for general industrial compressed air applications. Bljdpjzxpi Nofx Aktjp Technical data: Manufacturer: BOGE Model: C 9 Type of equipment: Screw compressor Year of manufacture: 2017 Volume flow: 1,060 m³/min Final compression pressure: 10 bar Motor power: 7.5 kW Motor speed: 3000 min⁻¹ Control: BOGE base control Digital operating and display panel Equipment: BOGE base control Digital operating and display panel Emergency stop switch Sound-insulated housing CE marking Application areas: Industrial compressed air supply Production facilities Workshops Machine supply Manufacturing companies General compressed air applications Scope of delivery: 1 × BOGE C 9 screw compressor Condition: Used Visual condition as shown in the pictures BOGE operating display shown in the switched-on state Nameplate available Dimensions: BOGE C 9 (W × D × H): approx. 483 × 907 × 955 mm Transport data: Weight BOGE C 9: approx. 215 kg Other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2005, Control system: Siemens Sinumerik 840 D / PCU 50 Travel range X 2300 mm Travel range Y 800 mm Travel range Z 600 mm Working areas in tandem operation 2 × 925 × 800 mm Main spindle 30 – 8000 rpm Spindle power 27.0 kW Spindle torque 244 Nm Machine bed: torsionally rigid, stress-relieved welded construction. Guidance system: roller guides Measuring system: direct path measuring system / glass scales on X, Y, and Z axes Resolution measuring system 3 μm / 1000 mm Feed drives: digital three-phase servo motors Feed rate up to 30 m/min Main spindle: water-cooled CELOX motor spindle Tool holder HSK A63 Spindle power 20.0 kW / 18.3 Nm Spindle speed 12,000 rpm Spindle cooling: cooling unit with closed circuit. Spindle orientation freely programmable Tool magazine: rotary tool magazine Bsdez R R Dnjpfx Aktelp Tool positions 56 Tool holder magazine HSK A63 Max. tool length 330 mm Max. tool weight 10 kg Max. tool diameter 80 mm Magnum version C80/2300: 56-position Magnum tool magazine Spindle speed 12,000 rpm / 29.0 kW Operating panel BHG / 840D, external Signal light 1-fold Hollow shank taper HSK A63 / 12,000 rpm Compressed air nozzle on the spindle head, controlled by M-function Full enclosure 80 × 2300 Exhaust filter MultiAir exhaust filter Extraction capacity 1200 m³/h Filter stage 1 Metal filter, class G Main filter AeroPlus, class F9 Flushing guns 1 pair, 3 bar / 20 l/min Working area partition C80, manually swiveling in/out Load direction cabinets C80, for tool measurement/inspection Max. tool length load direction cabinet 230 mm Max. NC rotary table RT 500 Max. pickup magazine T3/W2 NC rotary table RT 250 The machine was also supplied with a vertical NC rotary table RT 250, including hydraulic spindle clamping and faceplate. Technical data RT 250: Part accuracy 15″ ± Repeat accuracy 4″ ± Center height 160 mm Runout 0.015 mm Flatness 0.015 mm Bore in rotary table 60 mm Speed max. 22 rpm Faceplate Ø 250 mm Bore in faceplate 35 H7 T-slots DIN 605 12 mm Number of T-slots 4 pcs Drive torque 300 Nm Holding torque 1000 Nm Tilting moment 1200 Nm Transport load 120 kg with tailstock 250 kg Weight approx. 60 kg 2-point transformation optional Further components: - 2 x compressed air guns with quick coupling, spiral connection hose, and holder. - 1 x flushing gun, flushing pressure: 3 bar / 20l/min. - 1 x anchor screws x 2300 - 1 x laser light barrier - 1 x working area partition - 1 x 3D wireless probe system Renishaw RMP 60: System 3D wireless probe system Switching 3D probe stylus yes Transmitter/receiver unit yes Battery 9 V Probing accuracy ± 2 μm Probing speed 3 m/min Probe stylus length 50 mm Ball diameter 6 mm (ruby) Repeat accuracy < ± 2 μm

Condition: new, Year of construction: 2026, -Tfon Bevel Wizard® Linear. -Precision Beveling for Linear & Non-Linear Applications. -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications. - Optimized for Large Workpieces: Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm. -Minimum Material Width: 250 mm. Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Contact Wheel Diameter: Ø135 mm. Emery Band Drum Diameter: Ø400 mm. Machine Weight: 10,000 kg Bljdpfjrt Tpnsx Aktsp Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency...

Condition: new, Year of construction: 2026, Exceptional special price, as it was used at our in-house trade fair. Operating hours: 2 Immediately available – subject to prior sale. First come, first served. Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated jaws Pre-compactor with end-position dampened cylinder and bolted cover Switchgear with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Bsdpfx Ajlht H Esktjlp Automatic on/off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Your advantages Blsdpfxjcnz U Es Aktjp Stable pressing mechanism with a wear-resistant, chrome-plated die Press chamber wear bushing Pre-compressor with end-position damping cylinder and screwed-on cover Control panel with PLC control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on a stable base frame with rubber feet Briquette length monitoring Robust design, low-maintenance technology, small footprint: The machines in the C-series are particularly suitable for small and medium-sized businesses whose required throughput of 50-80 kg/h or 200 to 400 kg/day is not exceeded. Virtually any suitable material can be briquetted, such as wood, styrofoam, foam, paper, or biomass. All machines are available in left-hand or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. Briquette diameter (mm) 50 Throughput up to (kg/h) 50 (material-dependent) Hydraulic motor (kW) 5.5 Screw motor (kW) 0.55 Oil volume (liters) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor for long operating times Briquette length monitoring: Regulates the length of the briquette to a uniform size Press chamber wear bushing: Prevents wear in the press area Location: Ex works - free loading

Condition: excellent (used), Year of construction: 2005, operating hours: 6,820 h, functionality: fully functional, turning length: 1,075 mm, turning diameter: 620 mm, spindle bore: 110 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,075 mm, rotational speed (min.): 3,000 rpm, total height: 2,780 mm, total length: 5,800 mm, total width: 2,100 mm, overall weight: 8,600 kg, CNC Lathe with c-axis Okuma - LB 400M MACH-ID 9780 Make: Okuma Type: LB 400M Control: OSP-E100L Year: 2005 KITAGAWA 400 mm chuck Spindle bore 110 mm Chip conveyor Feed rate X-Axis 20M/Min Feed rate Z-Axis 25M/Min Coolant and Filtration system Bjdpfxezu Nu Re Aktolp Max. turning Ø: 620mm X-Axis: 300mm Z-Axis: 1075mm Spindle bore: 110mm Speedrange: 3500Rpm Spindle power: 45kW ATC / revolver: 12 Speed live tools:3000Rpm Chip conveyor: Yes Tool eye: Yes Hours: 6820H Pinole taper: 5Mk Length: 5800mm Width: 2100mm Height: 2780mm Weight: 8600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Blodpfx Ajy Ehrxektsp Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), lifting height: 16,400 mm, General information Year of manufacture: 2019 Bljdpfsy T E S Ejx Aktjp Operating hours: 1.354 Weights Empty weight: 2.800 kg Functional Lifting capacity: 3.150 kg Dimensions of cargo space: 315 x 75 x 195 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: NL Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Hoeflon C6 * 2019 * 1,354 operating hours * Diesel (Yanmar) and 230 Volt drive * Equipped with all options * 16.4 meter working height * 14.4 meter horizontal reach * 3,150 kg lifting capacity * 2,800 kg own weight * Remote Control * Articulated outriggers * Including documents

Condition: ready for operation (used), Bellows for Maho MH 800 C machine, width: 45.5 cm, length: 85 cm, used, in good condition, 100% functional, scope of delivery as shown in the photos. Blodpez Tbdmefx Aktop

Condition: ready for operation (used), Operator's manual for the MAHO MH 800 C machine, chapters 1-10, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bedpfez Syykex Aktslp