Used Cable Avoidance Tool for sale (40,687)

Condition: ready for operation (used), functionality: fully functional, power: 78 kW (106.05 HP), fuel type: diesel, Year of construction: 1992, operating hours: 10,027 h, Equipment: cabin, Tire size: 10.00-20 Lifting speed: 66 m/min Operating weight: 22000 kg Load hook: 20000 kg Boom design: upper section 3500 mm / lower section 3500 mm / intermediate section / 3000 mm / intermediate section 1500 mm Basic equipment: with 4-point sliding beam support Engine manufacturer / type / power: Deutz / F6L 912 / 78 kW Max. Load capacity: 25000 kg Extension length: 11500 mm Todpfx Aisrvgyxerod

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Tedpfxeqttt To Aired

Condition: used, Tool assembly stand SK 40 Tedjrrii Uepfx Airsd

Condition: used, SK 40 tool transport trolley Tedpsrrikkjfx Aired

Year of construction: 1976, condition: good (used), Deckel FP1 tool milling machine, 3-axis Heidenhain digital readout, machine was overhauled by FPS years ago. Rigid table, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, paint is no longer so nice, can be demonstrated under power by arrangement. Tedpfxorhzcus Airsd

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6114676, Country of manufacture: Switzerland Voltage: 380 / 50 / 3 Net weight: 180 kg Dimensions: 850/620/1600 mm Installed power: 0.7 kVA Customs tariff code: 8460.3930 TECHNICAL CHARACTERISTICS DOUBLE CUP PRE-GRINDING AND SUPER-FINISHING WHEEL (FOR HARD METAL) - Abrasive: diamond - Diameter: 175 mm - Bore: 20 mm Spindle speed: 2500 rpm Tsdpfxsw T S Tbe Airod Cutting speed: 23 m/sec Spindle bearing: precision plain bearing Micrometric infeed of the workpiece by means of a fine-pitch threaded spindle, division: 0.01 mm Adjustment of approach and clearance angle: max 26° TOOL HOLDER CLAMPING CAPACITY: - Prism-shaped tool bodies: max 40x40 mm - Cylindrical tool bodies: max 16 mm - Circular cutting tools: max 85 mm MOTOR POWER: - Drive motor: 0.55 kVA - Pump motor: 0.1 kVA Coolant tank capacity: 10 l. All technical specifications are provided without obligation and subject to error or omission.

Condition: like new (used), Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions Machine is partially overhauled and with electrical acceptance report! Tjdpow U Eg Rofx Airjd !! Various measuring optics (new or used) with measuring cross sled available !!

Condition: used, Year of construction: 1989, functionality: fully functional, grinding wheel diameter: 125 mm, overall weight: 520 kg, collet bore: 25 mm, grinding spindle speed: 500 rpm, power: 1.1 kW (1.50 HP), input current: 20 A, input frequency: 50 Hz, year of last overhaul: 2021, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 10000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! Notice: We would be happy to provide you with a free offer. However, please understand that we only accept inquiries with a complete address Tedpow U Ehzefx Airsd edit. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: * Machine stand and carrier plate ground * Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > EMC cables and screwed connections > new protective cables > new control panel > Emergency stop switch * Opto electronic measuring device with microscope, support arm, parking space, new 2-axis Fagor digital readout and scales completely mounted and adjusted * dividing head Sk 40 with prisms and 24 R dividing disc * 1 graduated disc 14 + 22 R each * Twist and back-grinding device with rack and pinion housing * Setting gauge * Complete tooth support * pivoting support finger * LED lamp waldmann * Dust extraction device without vacuum cleaner * Univ. adjustment gauge * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm * Collet sleeve with forcing nut * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4 * 3 grinding wheel chuck L 48, 35 mm * Protective cover * Exchange grinding spindle * Tool cabinet with 4 drawers * Shelves for dto. * Operating key, operating instructions, spare parts list, circuit diagram * Machine and accessories completely overhauled and with electrical test certificate!* 6 months warranty !

Condition: excellent (used), Collet chuck/quick-change inserts Todpowf Ha Isfx Airod Cone 38 mm Collet cone diameter max. 27.7 mm Collet cone diameter min. 24.2 mm Length 45 mm Outer diameter 30 mm Stock number (28603)

Condition: excellent (used), mileage: 1,42,744 km, first registration: 06/2019, fuel type: diesel, axle configuration: 8x2, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Power brake booster - Roof spoiler - Low noise - Speed limiter - Refrigerator - Air suspension - Air horn - Particulate filter - Reversing camera - Sleeper cab - Sun visor - Stability control - Toolbox - PTO (power take-off) - Towing jaw = Further Information = Technical Details Number of cylinders: 6 Engine capacity: 12,742 cc Unladen weight: 18,043 kg Transmission Gearbox: OPTICRUISE, automatic Axle Configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Twin wheels Rear axle 2: Lift axle; steering Functional Lifting capacity: 10,000 kg Lifting height: 1,750 cm Crane: HIAB X-HIPRO 362 EP-5, mounted behind the cab Body manufacturer: SAWO CABLE LIFT 326 3W 20 TON Condition Technical condition: very good Visual condition: very good Tedpeuxuthofx Airod Financial Information Price: On request SCANIA G500 NGS 8X2 + SAWO 3-SIDED CABLE SYSTEM + HIAB X-HIPRO 362 EP-5 CRANE EURO 6 L PACKAGE 500 HP DRIVE 8X2 WITH LIFTABLE AND STEERABLE LAST AXLE AIR SUSPENSION WHEELBASE 560 CM CG20N SLEEPER CABIN WITH AIR CONDITIONING, NAVIGATION, FRIDGE, CAMERA AUTOMATIC GEARBOX WITH ENGINE BRAKE TRAILER COUPLING WITH HYDRAULIC CONNECTIONS SAWO 3-SIDED CABLE SYSTEM 20 TONNES NUMEROUS TOOLBOXES HIAB X-HIPRO 362 EP-5 CRANE 5X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL 5+6 FUNCTIONS ON THE CRANE ROTATOR OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 10,000 KG MAX LIFTING CAPACITY AT 1500 CM: 1,860 KG MAX WORKING HEIGHT: 1,750 CM ONLY 711 OPERATING HOURS!!! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: refurbished (used), functionality: fully functional, Hello, We are offering rebuilt ER-093996 Square 25 Holder C from Erowa. The holders were converted from the old version ER-010607 without gripper grooves and sealing plate. We completely disassembled, blasted, cleaned, and readjusted them. Including clamping spigots. You are also welcome to send us your holders for rebuilding or overhaul. We are happy to answer any questions or provide technical assistance. Todowa Sffepfx Aired

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Tjdpfxsv R E Rdo Airod Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Tjdpfx Aowid Spjirjd Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Year of construction: 2026, condition: new, Number of drawer 11 Stk. weight ca. 150 kg table surface area 1370 x 515 mm work height max. 1110 mm range L-W-H ca. 1380 x 550 x 1110 mm Manufacturer's recommended price approx. 8.000 euros Tool range: 390 pieces Special price on request!! Equipment: - mobile tool trolley including wooden worktop - robust and stable construction - aluminum drawer handles - 11x high-quality drawers - 9x drawers with equipment - including 390-piece tool range (!!) - Color = glossy green - 2x rigid castors / 2x steerable castors - including parking brake - central locking system Tedpfxjxaa Nie Aired

Year of construction: 2000, condition: repair required (used), functionality: not functional, Spare parts, service, and repairs for tool milling machines from the production of TOS, later INTOS Zebrak of the series FN 20/32/40, FNGJ 20/30/32/40/50, FNGP 40/50 Tjdpfx Aexg H Hhoirsd

Condition: used, This listing is for the Avestin EmulsiFlex-C5 for homogenizer with sealed toolings and spares The unit is in full working condition and is ready for immediate use EmulsiFlex-C5 High Pressure Homogenizer The Avestin EmulsiFlex-C5 is a high-pressure, pneumatically powered homogenizer designed for laboratory-scale applications. It is ideal for processing small to medium sample volumes, from 7 mL up to 5 L/h, depending on the pressure applied. How It Works: High Pressure Homogenisation High pressure homogenisation is an efficient and easy-to-use technique for cell disruption and liposome/emulsion processing. The principle involves pumping the sample through a valve with a small aperture. The sample transitions from very high pressure (up to 30,000 psi) on the pump side to atmospheric pressure on the outlet side. This sudden drop in pressure creates intense shear forces, disrupting cell membranes or dramatically reducing liposome/emulsion sizes. For cells, the pressure-induced shear forces rupture the membranes, effectively lysing the cells. For liposomes and emulsions, this process reduces their size from micron to nanometer range, often resulting in uniform particles with narrow size distributions. Unique Features of the EmulsiFlex-C5 Dynamic Homogenising Valve The C5 uses a dynamic homogenising valve, which maintains constant pressure during sample processing. This consistency ensures the formation of highly uniform liposomes and micro-emulsions, with tight particle size distributions. Efficient Cell Disruption Most cells (including E. coli) can be lysed in a single pass, minimizing over-processing and reducing the risk of protein denaturation or degradation. Pressure Range: Adjustable from 500 to 30,000 psi Flow Rate: 1–5 L/h depending on pressure Minimum Sample Volume: 7 mL Holdback Volume: Less than 1 mL Temperature Control: Can be used with ice baths, external chillers, or in cold rooms Tedpfx Ajxhgaweirsd Autoclavable: Easy cleaning and sterilization (SIP-compatible) Compact Size: 430 × 160 × 320 mm, 25 kg Power Source: Requires compressed or bottled air. For most applications (e.g., E. coli disruption or liposome formation), 100 psi air pressure is sufficient. Applications Disruption of bacterial, yeast, algal, insect, or mammalian cells Nano-sized liposome and emulsion formation Particle size reduction in pharmaceuticals, cosmetics, and food products Liposomal drug delivery systems Efficient homogenisation for biochemical and biophysical research

Condition: excellent (used), Rondamat R 934, year 1997, in very good condition. Tedpfxexiv S Ej Airsd

Condition: used, Punching bracket, punching unit SUPRA-CLAP / CEWE Type PAE 50 - 400 3GN 3P1 Throat depth: 400 mm Punching capacity: max. 10 mm material thickness Hole diameter: max. Ø 50 mm Distance between upper and lower bracket: 19 mm Punch holder: Ø 78 mm Cutting plate outer diameter: Ø 78 mm Cutting plate thickness: 20 mm Drop-out opening in punching bracket: 52 mm Installation height: approx. 220 mm - Punch holder as a punch unit with punch mount and material stripper with disc springs - Punch holder rotation-proof guided and spring-loaded - Punch length 97 mm, shank Ø 35 / 50 mm Tsdpexbh N Tofx Airjd - Round hole tool: punch Ø 41 mm and die Ø 41.5 mm - Long fixing hole: 270 x 13.5 mm Dimensions of punching bracket (L x W x H): 550 x 95 x 220 mm Weight: 27.5 kg Good condition 4 units available, price per unit 3 units with Ø 41 mm punch tool 1 unit with Ø 43 mm punch tool

Condition: used, Tool holders VDI 60 Tedpfx Aijx Em Ncorjd

Condition: used, Year of construction: 2011, turning diameter over cross slide: 75 mm, turning diameter: 381 mm, spindle speed (max.): 3,500 rpm, spindle bore: 75 mm, travel distance Z-axis: 850 mm, total height: 2,325 mm, total length: 4,820 mm, total width: 2,100 mm, overall weight: 8,000 kg, CNC Lathe with Y-axis, driven tools and 2nd Spindle CNC Control Fanuc series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 R/min Spindle motor 22/15 Kw Movement X-axis 190 + 69,5 mm Movement Y-axis +55 / -55 mm Todpfxszv Smfj Airod Movement Z-axis 850 mm Movement W-axis (subspindle to mainspindle) 830 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper VDI 40 Bar feeder Irco-Breuning ILS MUK Spindle motor driven tools 4000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2000, measuring range X-axis 330 mm Todszupmmspfx Aired measuring range Z-axis 400 mm dimensions 880 x 520 x 990 m Tool spindle: SK 50 Indexable (4× 90°), pneumatic Measuring system: Heidenhain LS series, optoelectronic Profile projector/optics: 0× magnification, cutting edge control using crosshairs Weight: approx. 250 kg

Condition: ready for operation (used), Year of construction: 1997, operating hours: 13,465 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 1,000 kg, controller model: Heidenhain iTNC 430, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 450 mm Travel range, Z-axis: 400 mm Table load: max. 1,000 kg Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain iTNC 430 Tjdpfxozwmx Ss Aired Operating voltage: 400 V Control voltage: 24 V Machine weight: approx. 6,000 kg Operating hours: 48,690 h Spindle hours: 13,465 h EQUIPMENT Tool holders SK 40 Documentation Heidenhain programming manual Machine vise Clamping jaws

Condition: excellent (used), Die block, 80 x 80 mm with V-grooves approx. 86°, length 2500 mm Tedpfx Aez Ndppoired

Condition: ready for operation (used), Year of construction: 1999, • Year 1999 • In our possession since 08/2024 Todpfx Aezcvaqeirjd • Quinto 4 software • Electrostatic filter, Elbaron model • Numerous spindles • Recent maintenance performed: external cleaning and repainting, spindle overhaul, spindle belt replacement, brush and front plexiglass replacement, wheel and door rail replacement, machine measurement, offset adjustment, ball reference setting, backlash check, replacement of the air filtration and lubrication adjustment unit, replacement of 4 electric fans.

Condition: used, Year of construction: 2017, Tool Presetter Manufacturer: ZOLLER Type: SMILE 420 Year of manufacture: 2017 Technical details Measuring range Z: 420 mm Measuring range D: 420 mm Tool holder: SK 50 Weight: approx. 215 kg Additional information: Condition: Used Technical features & accessories: - Adapter SK 50 to SK 40 - Pilot 1.0 software Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Tedpfx Asz Ek D Ejirod Subject to technical changes, errors, and prior sale.