Used Room Electromedicine for sale (977)

Condition: good (used), Year of construction: 1964, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 40 rpm, input frequency: 50 Hz, Manufacturer: Deckel Type: FP2 Tool holder: SK 40 Travel ranges X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Bdsdpfjilg H Esx Airsi Spindle stroke, vertical: 60 mm Spindle stroke, horizontal: 100 mm Feed rates: 8 - 400 mm/min Table size: 700 x 300 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Space requirement L x W x H, approx.: 1200 x 1250 x 1670 mm Head swivels: 90° / 90° Equipment: - 3-axis digital display - Coolant system We would be happy to demonstrate the machine in operation at your location. All information is subject to change without notice. Subject to prior sale.

Year of construction: 2024, condition: used, Positive temperature refrigeration unit with cooling unit Cooling unit, Intarcon brand Wall-mounted installation on the refrigeration unit wall Rated electrical power 0.7 kW Power supply 230 V / 50 Hz Rated current 5 A Maximum absorbed current 10 A Maximum starting current 52 A Refrigerant R-134a Refrigerant charge 0.7 kg Maximum permissible pressure 18 bar Hermetically sealed refrigeration circuit Electronic regulator with front panel display White casing with ventilation grille Chamber dimensions: 2120x1720x2470mm Key advantages Wall-mounted installation with limited floor space requirement Single-phase 230 V – 50 Hz power supply Electronic regulator with front panel display White metal casing with ventilation grille Bsdpo Agu Dhofx Airodi Hermetically sealed refrigeration circuit Refrigerant and its charge identification Nameplate detailing electrical data Manufactured in Spain

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Bedpfeq H H Ruox Airedi Technical data attached to the photos.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, spindle speed (max.): 2,000 rpm, spindle speed (min.): 80 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, Universal milling machine Deckel FP1 – Very good condition For sale is a Deckel FP1 universal milling machine in very good, well-maintained condition. The machine is equipped with a 3-axis digital display Heidenhain TNC 113 and stepless feed in all three axes. The Deckel FP1 is known for its precision, reliability and durability and is ideal for toolmaking, single-part production, repair work and training companies. Technical data Manufacturer: Deckel Model: FP1 Year of manufacture: 1985 Machine number: 15082 Spindle speed: 80–2,000 rpm Drive power: 1.6 / 2.0 kW Stepless feed in X, Y and Z axis Rapid traverse in all three axes Travel ranges (X/Y/Z): 300 / 160 / 340 mm Fixed angular table Vertical milling head on spindle head, adjustable by 100 mm Vertical and horizontal spindle with SK40 collet Clamping system: S20x2 Spindle brake Space requirement: 1.30 m x 1.10 m x 1.60 m (L x W x H) Machine weight: approx. 850 kg Equipment Bdedpfxszlnmmo Airsi - 3-axis digital display Heidenhain TNC 113 - Hydraulic vise - Coolant system - Operating manual The machine is in very good technical and optical condition and is ready for immediate use. An inspection and a test run can be arranged at any time by appointment.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel FP 1 MK with TNC 123, year of manufacture 1994, with CE marking. Spindle speeds: 40 - 2000 rpm, SK 40. Travel distances: X 300, Y 160, Z 340. Stepless feed rate + rapid traverse in all axes. Weight: approx. 880 kg. Bsdpfx Aijzx Ep Sjrodi Accessories: Universal table, electric central lubrication system, coolant system, collet set, 5 tool holders, Röhm machine vise, swarf drawer. Condition: Original, not repainted, smooth operation at all spindle speeds and axis movements, and flawless guidance. Can be inspected while powered on. Free loading at D-88433 Schemmerhofen.

Condition: good (used), Year of construction: 2014, Set of 4 modular office units, room-in-room system, two-story, including staircase, approx. 139m2 – used: Price ex-works: €19,950 (net), disassembled, packed, and loaded! Item no. 11: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, likely 2014 Roof accessible, with a maximum load capacity of 100kg Element width: approx. 1.03m Length including staircase: total approx. 14.51m Width of “gap” for the staircase: approx. 1.27m Right block, top and bottom: Length: approx. 4.60m (4 elements and one narrow element) Bdodpfxjzqzuue Airji Left block, top and bottom: Length: approx. 8.64m (8 elements) Depth approx.: 5.28m (5 elements) Ground floor height: approx. 2.70m Total height approx. 5.40m 4 doors All offices are closed on three sides and therefore stand with one side against the hall wall Includes lighting, etc., as available Ground floor without flooring, upper floor with flooring Sale excludes furniture, etc. Condition: good Available: from approx. Q4 / 2026 Location: Hamburg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, DECKEL FP 4 MK Year of manufacture: 1992, with TNC 113 active digital control with positional programming Spindle speeds: 50 - 2500 rpm Travel ranges: X 500, Y 400, Z 400 Feed rate: stepless + rapid traverse Hydraulic tool clamping system SK 40 Hydraulic machine vice Allmatic 125 Universal table Central lubrication, electric, lighting, machine feet, coolant system. Condition: original, not repainted Smooth and quiet operation at all spindle speeds Guideways and axis movements are in perfect condition. Weight approx. 1500 kg Can be inspected while powered on. Free loading D - 88433 Schemmerhofen Bodozxwz Tepfx Airjdi

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel ranges X-axis: 300 mm Y-axis: 300 mm Z-axis: 400 mm Work table Table dimensions: 620 × 390 mm Spindle Bdedpfx Ae Adz Huoirsi Speed range: 40–2,500 min⁻¹ Tool holder: SK 40 Milling head, swiveling: ± 90° Feeds Feed range: 2–3,600 mm/min Rapid traverse: 4 m/min Control Control system: Deckel DIALOG 4 MACHINE DETAILS Machine type: Tool milling machine Manufacturer: Deckel Model: FP2 MC Dimensions (L × W × H): 2,000 × 1,800 × 1,800 mm Weight: 1,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: Deckel Type: FP1 Machine number: 54.099/08 Machine type: Tool milling machine SPINDLE Bodpfxs Adulqo Airsdi Spindle speed: 40–2,000 min⁻¹ Tool holder: SK 40 WORK TABLE Table dimensions: 600 × 210 mm Table slots: 4 TRAVEL X-axis: approx. 300 mm Y-axis: approx. 300 mm Z-axis: approx. 300 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,000 mm Width: 800 mm Height: 1,500 mm Weight: 700 kg EQUIPMENT 2-axis digital display

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS CONTROL Control system: Heidenhain TNC 135 WORKING AREA Travel in X-axis: approx. 300 mm Travel in Y-axis: 300 mm Travel in Z-axis: 300 mm WORK TABLE Bdodpe Adzqtofx Airoi Table dimensions: 700 × 270 mm Number of T-slots: 6 MACHINE DETAILS MACHINE DATA Manufacturer: Maho Type: MH 400 P Machine type: Tool milling machine DIMENSIONS AND WEIGHT Length: 1,500 mm Width: 1,200 mm Height: 1,800 mm Weight: 600 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, workpiece weight (max.): 200 kg, Universal machining center Manufacturer: MACMON Type: M 100 ADR Technical data: - Heidenhain TNC124 control system - Machine number: 7989 - Year of manufacture: 1998 - Travels: X 310 mm, Y 170 mm, Z 330 mm - Spindle speed range: 40-2500 rpm (continuously variable in 2 ranges) - Feed rate: 10-800 mm/min (continuously variable) - Rapid traverse rate: 800 mm/min - Equipment: Vertical and horizontal spindle (including lifting device for vertical spindle) - Table size: 600 x 215 mm - SK40 - Drive motor: 2.2 kW - Connected load: 5.5 kW - Weight: approx. 750 kg Bedpfx Ajrwml Aeirjdi - Space requirement: 1000 x 1160 x 1400 Includes complete documentation All information without guarantee. Subject to prior sale.

Condition: excellent (used), Year of construction: 2012, 455 USED Koma CDS cooling - proofing room. TECHNICAL DATA: - year of production: 2012 - temperature range: -12°C - +30°C EXTERNAL DIMENSIONS (in cm): - width 137 - wepth 260 Bjdpfxezlm T Se Airedi - height 255 INTERNAL DIMENSIONS (in cm): - width 89 - depth 205 - height 200 The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We also offer bakery machines, bakery equipment, roll lines, bread lines, refrigerator and proofer. If you want to see our full current offer, visit our Bakeres profile.

Condition: good (used), functionality: fully functional, Feed rates continuously adjustable in all 3 axes Spindle travel 60 mm Bdedpfx Aie Agfg Torsi Table surface 600 x 250 mm Spindle speeds 45 - 1950 rpm Feed rates 10 – 470 mm/min...continuously adjustable... Longitudinal travel (X) 315 mm Transverse travel (Y) 180 mm Vertical travel (Z) 320 mm

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Bjdpfxs Aa Il As Airodi Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Bodpfxjykrtpe Airedi Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS TRAVEL X-axis: 400 mm Y-axis: 300 mm Z-axis: 300 mm WORK TABLE Table dimensions: 600 × 210 mm Number of T-slots: 4 T-slot width: 12 mm SPINDLE AND FEED Spindle speed: up to 2,000 rpm Feed range: 10–500 mm/min MACHINE DETAILS Manufacturer: Deckel Type: FP1 Machine type: Tool milling machine Dimensions (L × W × H): 1,000 × 800 × 1,500 mm Weight: 700 kg EQUIPMENT Workshop cabinet Bdjdpfx Aij Adui Aorsi Matching accessories for the machine

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS SPINDLE Spindle speed: 40–2,000 min⁻¹ Tool holder: SK 40 WORK TABLE Table dimensions: 600 × 210 mm Table slots: 4 TRAVEL RANGES Travel in X-axis: approx. 300 mm Travel in Y-axis: approx. 300 mm Travel in Z-axis: approx. 300 mm MACHINE DETAILS Machine type: Tool milling machine Manufacturer: Deckel Model: FP1 Machine dimensions length: 1,000 mm Machine dimensions width: 800 mm Machine dimensions height: 1,500 mm Machine weight: 700 kg Bdedpfxo Aduhlo Airsi

Condition: not inspected (used), travel distance X-axis: 400 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, Universal Tool Room Milling Machine Manufacturer: DECKEL Model: FP3NC Control System: Dialog 4 Technical Specifications: - X-axis travel: 400 mm - Y-axis travel: 315 mm - Z-axis travel: 400 mm - Spindle speed: 3,150 rpm Bdjdjzz S Rnspfx Airsi Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 1971, x-travel:450 mm y-travel:320 mm z-travel:450 mm table-size:950 x 300 mm spindle turning speed range:39-2320 U/min spindle taper:SK 40 power capacity - milling spindle:2,5 kW total power requirement:2,8 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,3 x 1,8 m with vertical head, spindle quill, swivelling horizontal spindle, variable adjustable feed for all Bjdpfx Aj Ad Skdeiredi 3 axes, coolant device, machine light, chip pan, emergency cut-off

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: SIXISSA Machine type: Tool milling machine WORK TABLE Table dimensions: 850 × 300 mm Number of slots: 6 CONTROL Control system: Heidenhain TNC 155 MACHINE DETAILS DIMENSIONS AND WEIGHT Bdodpfe Ad D S Tsx Airsi Length: 2,500 mm Width: 2,000 mm Height: 2,700 mm Weight: 1,000 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 530 022, type of input current: three-phase, input voltage: 400 V, Manufacturer: Deckel Maho Type: FP1 Aktiv-Digital – Heidenhain TNC 123 - 2102 Serial number: 530 022 Technical data • Control system: 3-axis Aktiv linear control Heidenhain TNC 123 • Lubrication: Automatic central lubrication system • Working area (X x Y): 300 x 260 mm (with a vertically adjustable milling head) • Clamping surface (rigid angle table): 600 x 210 mm • Max. table load: 200 kg • Spindle speed: 40 – 2,000 rpm (high-torque direct drive with 8 gear stages) • Feed drive: Infinitely variable digital drive • Main spindle drive: High-torque, pole-switching three-phase brake motor • Measuring system: Direct position measuring system via glass scales in all axes (X/Y/Z) • Positioning accuracy: 0.005 mm • Table slots: 4 pieces of 12H7 slots at a distance of 45 mm Description For sale is a highly precise and versatile tool milling machine DECKEL FP1 in the popular Aktiv-Digital version. The machine is characterized by its compact design, extreme reliability and highest precision in tool, prototype and fixture construction. Bdedpfx Asz Sqq Tjirsi Highlights & Control System: • Heidenhain TNC 123: Very easy-to-use 3-axis digital display with active positioning (incremental chain measurement and absolute linear measurement). The control system has 20 programmable reference points. • Automatic central lubrication: For minimal maintenance and optimal wear protection, this machine features the valuable upgrade of an automatic central lubrication system. • Central operating convenience: All machine functions, such as infinitely variable feed rate, rapid traverse, motor brake on/off, spindle start/stop and coolant, are clearly arranged directly on the swiveling control panel. • Ergonomics: Mechanical, manual safety handwheels with scale ring in all axes ensure a sensitive response. Additionally, a handwheel scale for fine positioning and a linear scale as a coarse scale are installed. Flexibility in machining: • Vertical milling head: The head can be swiveled by ±90° and can be positioned precisely using a scale. An integrated quick-lock allows it to be quickly and precisely aligned vertically again. • Horizontal machining: The milling head is simply swiveled by 90° and moved backward. • Drilling quill: The vertical spindle has an integrated clamping mechanism and can be extended manually up to 60 mm for drilling operations. Safety: • The machine is equipped with an additional, easily accessible emergency stop button directly on the housing for optimal work safety. Condition & Accessories • Condition: Very good, well-maintained and ready for immediate use. Includes wiring diagram.

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, approx. 150 m2, several rooms – used: Price ex location: €19,500 (net), disassembled, packaged, and loaded! Item 8: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Roof accessible for personnel, max. load 100 kg Element width: approx. 1.03 m Length: approx. 21.40 m Depth: approx. 7.60 m, or 8.10 m (6-7 elements) Height: approx. 2.96 m Several doors All offices are enclosed on three sides and are therefore positioned with one side against the hall wall. Includes lighting, etc., as available. Without flooring. Sale excludes furniture, etc. Condition: good Available: from approx. Q4/2026 Bdsdpfx Aiezqzyqerei Location: Hamburg

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 2 h, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 20,000 m³/h, filter area: 295 m², noise level: 75 dB, actuation type: electric, total height: 3,643 mm, total length: 2,066 mm, total width: 1,756 mm, overall weight: 1,590 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, NOVUS Airtower FT 20,000 EC – like new – only 2 operating hours For sale is a NOVUS Airtower FT 20,000 for extracting welding fumes in industrial halls. The unit was used exclusively for testing purposes and currently has only 2 operating hours. The Airtower has been technically inspected and is in perfect working order. All features are functioning correctly. There are no damages. Bjdpfx Aijzfx Rijredi Equipment: * NOVUS Airtower FT 20,000 * ECblue efficiency package * NOVUS particle sensor * NOVUS lighting package * Timer * Automatic filter cleaning * 3 filter stages * Total filter area 295 m² * Dust container 200 liters * Plug & Play, no piping required * Forklift attachments and crane eyes Technical data: * Airflow rate: approx. 20,000 m³/h * Motor power: 15 kW / 400 V / 50 Hz * Dimensions: approx. 2,066 x 1,756 x 3,643 mm * Weight: approx. 1,590 kg * Sound pressure level: < 75 dB(A) A guard was removed during the testing phase and has already been reordered. This will be professionally installed before delivery. Price: €27,900 net, negotiable, plus VAT. Sale exclusively to businesses. Location: 48691 Vreden. Inspection possible by appointment. Loading can be arranged on-site.

Condition: good (used), Year of construction: 1987, Mikron WF2SA machining center with a 3-axis Heidenhain Aktiv digital control system. Fixed angular table, SK 40 spindle mount. Ready for operation. Machine can be demonstrated under power by arrangement. Bdodpfxezvyh Dj Airoi

Condition: used, Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 430 mm, table length: 400 mm, table width: 800 mm, type of input current: three-phase, total height: 2,150 mm, total length: 1,900 mm, total width: 1,400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, MEXPOL D40A1 Universal Tool Milling Machine with HEIDENHAIN Digital Readout and Counter Support For sale is a robust MEXPOL D40A1 universal tool milling machine, manufactured in 1998. This machine is ideally suited for toolmaking, general mechanical engineering, single-part and small-series production, as well as repair and training workshops. The milling machine is equipped with a HEIDENHAIN ND 780 digital readout, which enables precise and convenient operation. The sturdy cross table with T-slots offers versatile clamping options. In addition, the machine features a coolant system and a counter support for supporting milling arbors during horizontal milling operations. The swiveling milling head expands the range of applications and enables flexible machining of various workpieces. The machine is in a well-maintained, used condition and was in operation until recently. Technical data: Manufacturer: MEXPOL Type: D40A1 Year of manufacture: 1998 Factory number: 50443 Machine type: Universal/Tool Milling Machine Spindle mount: SK 40 Speed range: 50 - 315 + 400 - 2500 rpm (9 steps) Feed rate range: 10 - 63 + 80 - 500 mm/min (9 steps) Travel (X / Y / Z): 600 × 400 × 430 mm Table dimensions: 800 x 400 mm T-slots: 7 pcs, 14 mm wide 3-axis digital readout: HEIDENHAIN ND 780 Coolant system Counter support Swiveling milling head Equipment: HEIDENHAIN ND 780 3-axis digital readout, swiveling Swiveling control panel Bjdezfxubepfx Airsdi Coolant system Hydraulic tool clamping Drilling quill Counter support for milling arbor operation Work light Handwheels for all axes Fold-up, all-around chip guard with gas springs Total weight: approx. 1,500 kg Machine dimensions: approx. 1900 × 1400 × 2150 mm (L x W x H) Subject to prior sale and errors.