Used Cable Shears for sale (5,151)

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 21 kW (28.55 HP), total length: 4,330 mm, total width: 2,200 mm, total height: 2,110 mm, empty load weight: 10,000 kg, workpiece length (max.): 3,100 mm, CNC Siemens achteraanslag en snijhoekverstelling 2 voorste steunpunten van 3 meter Handmatige afstelling van de messpeling Instapbeveiliging aan de achterzijde Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Backgauge: 1000 mm Siemens Kwedpfx Ajv Taiasdwot Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Number of sheet holders: 17x

Condition: used, Technical details: round bar steel: 32 mm square edge steel: 30 angle steel: 90 x 8 mm flat steel: 100x18 mm Knife length: 220 mm number of cutting strokes max.: max. 30 Hübe/min p.Min. voltage: 220/380-50 V rated current: 15,8/8,55 Kwodeu Icghspfx Adwet connected load: 4,8 kW weight of the machine ca.: ca. 1,1 t Dimensions (LxWxH): 0,8 x 1,2 x 1,3 m Capacity: - Steel sheet: 16mm - Flat steel: 100 x 18mm - T profile: at 45°: 65 x 7mm, right angle: 90 x 8mm. Machine is in working condition *

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm cutting gap adjustment: nein down holder: 5 Stück back gauge: ca. 500 manuell mm Kwedpfx Aou Icppsdwst total power requirement: 2,2 kW weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m further features: -with shear angle adjustment -operation via foot switch -voltage 380 V *

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein Kwsdpfou Icp Ajx Adwst total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, Technical details: sheet width - max.: 200 mm plate thickness: 10 mm Knife length: 175 mm round: Ø 20 mm square: 18 mm height over floor: 900 mm machine weight ab.: 200 kg Kwedpfx Asu Icqajdwot dimension machine xH: 0,73 x 0,66 x 2,3 m dimensions L x W x H: Untergestell/Tisch: 0,73 x 0,66 x 0,60 m MECHANICAL HAND LEVER SHEARS Steel construction welded with angle - with base frame -Hand lever length = 1,300mm, with safety lock *

Condition: used, Year of construction: 1995, Technical details: Kwodpevc Amtefx Adwjt sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Year of construction: 1991, Technical details: operating pressure: 160 bar distance between columns: 2000 mm throat: 1000 mm operating pressure: pneum. min/max 6/8 bar operating pressure: hydr. min/max 160/210 bar voltage: 380/50 V /Hz table surface area: 1900x1000 mm height over floor: 1000 mm tool clamping area: 1600x350 mm quantity of oil : 400 l total power requirement: 25,0 kW weight of the machine ca.: 7,1 t dimensions electric cabinet LxWxH: 1,0x0,3x1,4 m dimension machine xH: ca. L:2,2xB:3,4xH:2,2 m CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device The machine has been used to punch holes in dashboards of cars. (incl. upper and lower tool) On the table are mounted the material intake and the sliding unit for the cut and hole punching. equipment: - light curtain - hydraulic pack - electric cabinet - control panel - workpiece counter - manual- and automatic operation possible - emergency stop Kodpou Icxdefx Adwowt On sale as is. i.D. *

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min Kedpeu Ickyefx Adwjwt height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, Year of construction: 2003, Technical details: throat: 625 mm number of strokes: 34 Hub/min Punching capacity: 40 t stroke: 80 mm flat steel: 480 x 15 / 380 x 20 mm U-H profile: 160 x 90 knife length: 483 mm total power requirement: 7,5 kW weight of the machine ca.: 2,7 t dimension machine xH: 1,4 x 0,8 x 1,8 m hydraulische section steel shear shearing station: -shearing max. 380 x 20mm / 480 x 15mm -shear cutting max. 120 x 15mm -holder adjustable in length to 750mm -knife cutting edges = upper knife 2-fold and lower knife 4-fold profile station: processing of round and square profiles; U-profiles; double T-beams and unequal angles Ksdpfxeu Icl Ro Adwowt -angle shearing max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -Profile cutting max. round steel = Ø 50mm; U-H profile = 160 x 90mm; T-profile = 120 x 12mm. Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Operation by foot switch Some accessories available. *

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 60 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine Ksdpfx Aju Icmhodwewt shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: used, Year of construction: 1993, Technical details: Kwjdpfou Icnfsx Adwot sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge *

Condition: used, Technical details: sheet width: 1500 mm plate thickness: 2,25 mm distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° cutting gap adjustment: nein mm down holder: über Druckleiste Stück height over floor: 850 mm Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear with shelf right/left 305 x 100mm operation via ON/OFF * Kwodpfx Aeu Icn Ejdwjt

Condition: used, Technical details: cutting capacity: 1 mm Ksdpfju Icqyox Adwowt round blank diameter max.: 1000 mm cutting capacity: 1 mm round blank diameter max.: 1000 mm Weight approx.: 0,2 t dimension machine xH: 2,0 x 0,5 x 1,4 m Application: manual cutting of round steel sheet parts upper blade Ø 69mm x 11mm; adjustment vertical 25mm with hand toggle lower blade Ø 74 x 15mm; adjustment NO = fixed Centering fixture with die The material is clamped manually with handle vertival 15mm. Displacement horizontal 500mm manual. *

Condition: used, Technical details: throat: 510 mm number of strokes: 34 Hub/min height of stroke: 100 mm sheet thickness - max.: 16 mm round bar steel: Ø 60 (scheren) mm square edge steel: 60 (scheren) mm angle steel: 90°: 200x200x18 und 45°: 100x100x13 (scheren) mm flat steel: 750x20 und 400x30 (scheren) mm knife length: 765 mm total power requirement: 15 kW weight of the machine ca.: 5,1 t dimension machine xH: 2,4 x 1,2 x 2,0 m Kwsdpfx Ajxcay Hjdwjt Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Punching: -Hold-down device -throat 510mm -Punching force 150t -Hole size max. Ø 40x28mm -Ø max. 165mm -max. punch holder Ø 31mm, currently installed punch Ø 25mm Notching: -max. sheet thickness 16mm -max. angle steel 120mm -Cutting depth x width: 110 x 58mm -Pipe notching device Ø 60mm Accessories: various dies and various punches and small punches (see photo) *

Condition: used, Technical details: Kwjdpfswp Edajx Adwst throat: 250 mm number of strokes: 42 Hub/min sheet thickness - max.: 13 mm round bar steel: 36 mm square edge steel: 30 mm angle steel: 100 x 10 bei 90° mm flat steel: 100 x 18 mm U-H profile: NP 10 knife length: 230 mm total power requirement: 2,5 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,1 x 1,0 x 1,6 m Application: Shearing - notching - punching Notching: material thickness = angle 50 x 8mm and rectangle 50 x 50 x 8mm Punching: max. 20 : 15mm, throat 250mm Foot control no longer available on both sides! Accessories various dies and various punches and small punches (see photo) *

Condition: used, Year of construction: 1992, Technical details: sheet width: 3000 mm plate thickness: 2,0 mm distance between columns: 3300 mm back gauge: 580 manuell mm cutting angle: Nein ° cutting gap adjustment: Nein mm down holder: 13 Stück Table dimensions: 3300 x 300 mm weight of the machine ca.: 3,0 t dimensions of machine: 3,7 x 1,5 x 1,8 m incl. 2x upper knife and 2x lower knife each 1500mm incl. table supports 1500 x 1500mm with roller elements 2x profile strips L: 1400mm 1x side stop bar 1600mm Kodpsu Icnrsfx Adwowt operation via control panel and/or foot pedal *

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Kwjdpfju Icpcsx Adwjt Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades *

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 2,3 x B: 3,7 x H: 1,8 m Kjdou Rni Hspfx Adwowt Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: good (used), Year of construction: 1992, Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine -Reinforced steel shear: hydraulic Kjdex Srlpjpfx Adwowt -Number of rods: Ø 12mm/8 pieces, Ø 16mm/4 pieces, Ø 35mm/1 piece -Foot switch: 1 -Dimensions: 1230/680/H640 mm -Weight: 419 kg

Condition: as good as new (ex-display), The KHT H 3010 CNC + sheet holding device is a state-of-the-art guillotine shear from KNUTH, designed for precise and powerful cutting within the category of Guillotine Shears and the product group of Hydraulic Guillotine Shears. Built with a highly rigid frame and guided cutter bar, it minimizes twisting in the workpiece, ensuring optimal cutting accuracy while reducing rework. The user-friendly Cybelec Touch 8 control system operates via a touchscreen, allowing you to input the length, thickness, and strength of the plate material to automatically adjust kerf, cutting angle, and length for optimal results. This robust machine accommodates materials up to 10 mm thick, making it suitable for stainless steel sheets, while features like hydraulically regulated hold-downs guarantee steady fixation of materials during the cutting process. Safety is prioritized with advanced features like a light barrier and foot pedal emergency switch, adhering to the latest CE regulations. To expand the functionality of this Hydraulic Guillotine Shear, the innovative plate hold-up feature supports the plate during positioning for high precision. For further information, you can request a quote or order online. Kwodpfx Adeq I Nb Towot

Condition: used, Year of construction: 2008, sheet width 3200 mm plate thickness 6 mm distance between columns 3200 mm back stop - adjustable 20 - 600 mm dimensions ca. 4010 x 1610 x 1620 mm engine output 7,5 kW Control eView weight of the machine ca. 7,2 t CNC swing cut panel shears electrical components from Siemens, ABB and Mitsubishi, Pilz safety control hydraulic components made in Italy Kwjdjqva Rzjpfx Adwot 3 support arms and 1 angle stop Ball rollers in the table Operating instructions available

Year of construction: 2000, condition: ready for operation (used), A hydraulic guillotine shear Turi is available. Cutting length: 2500mm, max. material thickness: 4mm, backgauge: 600mm, stroke rate: 20/min. Machine dimensions X/Y/Z: approx. 3300mm/1500mm/1500mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible. Ksdpfx Aeyb Scxsdwswt

Condition: excellent (used), operating hours: 1,500 h, - rotary shear type MEWA UC 201 - Electric drive 2 x 75 kW Ksdpfox Szfljx Adwjwt - Rotor length approx. 2 meter - width of the knives 70 mm - with chain conveyor for the outlet of the product It is a very powerful machine for shredding materials as tires or light scrap.

Condition: like new (used), Year of construction: 2018, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.5 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current new price approx. 20.000 Euro from a maintenance workshop very little used - mint condition (!!) - in checked conditions - machinevideo - ?v=tUyx7mR0vp4 Equipment: - robust / powerful electro-mechanical guillotine shears Kwedpfx Adex Sr Dxswot - manual material backgauge * stepless adjustment range * adjustment from behind - by handwheel * including mm scale * max. adjustment range 550 mm - Manual kerf adjustment, from the front - 1x side stop - 1x support arms - 1x free-moving foot switch - rear sheet metal chute - rear safety device (light barrier) - Operating instructions (machine control)

Condition: ready for operation (used), Year of construction: 1990, Immediately available ex stock: EHT Hydraulic Guillotine Shear Type EHS 10 – 31 Year of manufacture: 1990 Kwodpfxjyb Ry Ae Adwst Cutting length: 3,100 mm Material thickness: 10 mm Electric backgauge: 10 – 1,000 mm Adjustable cutting angle: 1 – 4 degrees Hydraulic hold-downs: 16 units Strokes/min: 22 Drive: 15 kW Weight: 8 t Spare blades included Price: EUR 5,750.— plus VAT, ex location