Plate Shear - Hydraulic

EHT TSS 20-25

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Bwsdpfx Aowbginsixow Weight of the machine, kg: 27’000

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: FN41918, Year of construction: 2011, load capacity: 2,500 kg, lifting height: 2,900 mm, fuel type: electric, battery capacity: 620 Ah, battery voltage: 80 V, empty load weight: 3,310 kg, color: yellow, Equipment: cabin, Forklift trucks | Electric forklift trucks Bodpfxerwxkws Aixoww Electric 4/wheel forklift truck from Jungheinrich Type EFG 425 K Year of construction 2011 Viewing is possible at any time by appointment. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Jungheinrich | EFG 425 K | EFG425

Condition: good (used), Year of construction: 1991, pressure 300 t chamfer lenght 4100 mm distance between columns 3710 mm stroke - stepless adjustable 250 mm column arm 330 mm dayligth 500 mm table height 940 mm table width 250 mm working feed 7.0 mm/sec return speed 90.0 mm/sec Control konv. operating pressure max. 305 bar voltage 380 V total power requirement 22.5 kW weight 25200 kg range L-W-H 4320 x 2100 x 3370 mm well-maintained condition (!!) - in checked condition - machine video - ?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings Bedexab I Tspfx Aixoww - 2x front, stable support arms - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Turning length: 1050 mm Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Tool post stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Accessories: Chip conveyor Bodpfx Aiov Epzvjxsww Tool holders, chuck jaws

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system Bwjdpfsr A Hcbex Aixow - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: new, The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Net price: € 39980 Gross price € 47576.12 Technical specifications Engine : Doosan & P126TI-II, 6 cylinder, water-cooled, turbocharged Generator: Newpower NW/N 330 Continuous power: 240 kW / 300 kVA Maximum power: 264 kW / 330 kVA Control system: Deep Sea DSE 7320 Connection: direct connection Bwodpfx Ajnkcaaeixow (Optional circuit breakers, outlets, automatic transfer switch.) Frequency : 50 Hz & 3-phase Voltage: 400/230V RPM : 1500 rpm. Dimensions (LxWxH): 3960x 1356x2167mm Weight: 3200 kg Network monitoring, soundproof Shipment: - Worldwide transport is available at an additional cost - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW Bwjdsfn Aqmepfx Aixjw weight of the machine ca. 1,8 t dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, turning height: 1,500 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,700 mm, feed length X-axis: 1,100 mm, feed length Z-axis: 1,200 mm, faceplate diameter: 1,450 mm, feed rate Y-axis: 300 m/min, feed rate Z-axis: 300 m/min, total width: 5,000 mm, total length: 5,500 mm, rapid traverse X-axis: 4,000 m/min, rapid traverse Y-axis: 4,000 m/min, type of input current: three-phase, rotational speed (max.): 200 rpm, rotational speed (min.): 200 rpm, spindle speed (max.): 200 rpm, table load: 8,000 kg, year of last overhaul: 2025, travel distance X-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, stroke length: 1,200 mm, disc diameter: 1,450 mm, overall weight: 21,000 kg, tool weight: 3,000 g, power of the servo motor: 40,000 W, repeat accuracy: 0.01 mm, Equipment: documentation/manual, CNC vertical lathe SC17, completely modernized in 2025 with Fanuc control. The machine is in very good condition, fully functional, live and available for inspection and testing. Technical specifications: Maximum turning diameter: 1700 mm Maximum workpiece height: 1500 mm CNC: Fanuc (complete modernization in 2025) Condition: functional, live Type: vertical turret lathe Advantages: Recent modernization - no additional investment required Reliable Fanuc control system Suitable for large workpieces Video available on request. Price on request Bjdpfxjyxfgms Aixjww

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Bwodpfx Aisxlcp Noxew Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light Bwsdpfx Aora Rrhjixsw new control in 2003: Cybelec DNC 1200