Used Cable Slot Machine Superior K 74 for sale (90,248)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 3 Edges thickness in stips / lippings max mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 270 / mm 1300 Numerical Control /Software ICOS open Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt SIZING PART (for each side): Pre-milling Unit (vertical joint trimmers) 75.30 (Kw 6,6 x 1) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1569 + 283.205 Pressing roller (revolver) both for straight and shaped edges (softforming) mm 1.050 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Rough Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Fine Trimming unit 08.0582 (Kw 0,66 x 2) 0°-30° Glue scraping unit 08.50 Lrodpfxjfi Tkgo Afzow Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 90 mm, Dear Sir or Madam, We hereby offer you a very well-maintained milling machine of the type Deckel FP4M (K) aktiv, featuring a rotary-tilt-swivel table and a 4-axis digital readout. With its extensive equipment, this model truly stands out among conventional machine tools. The machine has been thoroughly inspected in our workshop, is therefore in excellent condition, and is immediately ready for operation. We look forward to your inquiry! Delivery time: Immediately available Machine No.: xxxx-xxxx Year of manufacture: xxxx Table version: Rotary-tilt-swivel table Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, infinitely variable Rapid traverse: 1300 mm/min Drive power: 3.7kW / 4.4kW Travel (X/Y/Z): 500/400/400 mm Tool holder: SK40 Clamping system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Further features and accessories include: 4-axis digital readout (Heidenhain), 3-axis active control, hydraulic tool clamping, rotary-tilt-swivel table, coolant system, machine feet, operating manual, and much more upon request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced beforehand - Upon request, we can completely or partially overhaul the selected machine - You are free to choose the paint color of your selected machine - If desired, you can order additional accessories such as tools, etc. directly - On request, we can install other accessories such as safety devices Lodpfx Ajvvtlgsfzsrw - We are happy to take care of shipping and/or installation

Condition: used, Slotting machine vice, vice for slotting machine -Span width: 110 mm -Jaws: 225 x 45 mm Lodpjb Uhq Sofx Afzjrw -Dimensions: 270/330/H155 mm -Weight: 20 kg/piece

Year of construction: 2000, condition: good (used), 17.piece Machine fixators Type : K1 Load capacity per piece : 900 KG Dimensions : Length 200 mm Width 100 mm Height with washer 80 mm Thread M16 In good condition . Lrjdpfx Afsm Tr Htszsw

Year of construction: 1995, condition: like new (used), Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Lrjdpfx Afswdy Rqozsw Technical features Dimensions Table dimensions: 9180 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis X axis traverse: 7400 mmY axis traverse: 1200 mmZ axis traverse: 1500 mm Milling head Head type: Auto-indexing head UDG40 (every 2,5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 22 kW Feedrates Rapid feedrates (X-Y-Z): 12000 mm/min Weight and dimensions Maximum weight on table: 30000 kgMachine weight approx.: 34000 kgMachine dimensions approx.: 13950 x 5600 x 3650 mm Accesories Guarding and new perimetral fenceAutomatic tool changer: ATC-50New Longitudinal rear chip conveyorElectronic handwheel: New HR-510External coolant and high pressure through spindle Sales conditions Warranty: 6 months mechanical partsSale conditions: On request View all technical features

Condition: new, Cardan shaft balancing machine BVI-03-74 Available in stock in Poland !!! Delivery time: one day!!! . . Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES Lrsdjpbv Tfspfx Afzsw • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 450 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit Lredpewb Ha Tsfx Afzow – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Lsdpfxjxq Apgo Afzsrw

Condition: used, Roller sets for section bending machine, 3-roll ring bending machine HERKULES WETZLAR The rollers fit a section bending machine HERKULES WETZLAR type BO 238 N Shaft diameter: 60 mm with 18 mm keyway 2 rollers set No. 1, roller diameter = 110 mm, roller width = 180 mm 2 rollers set No. 2, roller diameter = 160 mm, roller width = 40 mm 3 rollers set No. 3, roller diameter = 150 mm, for tube diameter Ø 33 mm, roller width 87 / 115 mm - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm without keyway The machine had 2 driven rollers Total weight of all rollers: 57 kg Good condition Lrjdpfx Aeglaq Iefzjw

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Features and Technical Data: - Drilling depth adjustment via maintenance-free linear guide - Efficient and economical operation thanks to rapid traverse system; manual cranking is eliminated - Smooth and steplessly adjustable drilling unit - Height adjustment with fine setting and gas spring for weight compensation - Cross travel and height adjustment with scales and adjustable stops - Vibration-free operation due to robust steel construction - Drilling depth adjustable via scale and stop - Drill head height adjustment can be fully used for vertical slotting - Large-dimension cast iron table with ground surface Motor power: 1.5 / 1.9 kW (2.0 / 2.6 HP) Voltage: 400 V Speed: 1,400 / 2,850 rpm Westcott drill chuck: 0–20 mm Maximum drilling depth: 220 mm Drilling width: 340 mm Height adjustment: 145 mm Drill head swiveling: -60° to +60° Drill table size: 595 × 315 mm Table extension: 2 × 200 × 220 mm Drill table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm (W × D × H) Weight: approx. 240 kg Availability: short-term Lrjdpfxjxllwcj Afzow Location: Flörsheim

Condition: good (used), Grindable, largest diameter: 200 mm Lrsdpfxelz Nxwe Afzew Center distance: 450 mm Weight of the machine approx: 2, 2 t Machine dimensions:

Condition: new, Year of construction: 2025, Semiautomatic milling machine with four electrospindles for water slot MLA WS42 EVO, new Lrjdpfxjwqlmds Afzsw

Condition: good (used), Year of construction: 2001, Ref. -No.: 10614 Manufacturer: CHIRON Type: FZ 18 K Year of construction: 2001 Type of control: CNC Control: SIEMENS SINUMERIK 840 D Storage location: Halberstadt Country of origin: Germany X-Travel: 630 mm Y-Travel: 400 mm Z-Travel: 630 mm Table surface area (LxW): 970 x 470 mm Tool Taper: SK40 Tool places: 40 Max. Tool Length: 280 mm Ljdpoxvw Saefx Afzjrw Max. Tool Diameter: 78 mm Max. Tool Weight: 8 kg

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Lodpfxswkir Dj Afzerw Storage location: Nattheim

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1691, overall weight: 12,500 kg, cutting height (max.): 300 mm, type of input current: three-phase, working height: 300 mm, saw blade diameter: 760 mm, total length: 13,500 mm, cutting width (max.): 450 mm, input voltage: 380 V, FOR SALE: CNC MACHINE HUNDEGGER K1-A I am selling a well-maintained and reliable Hundegger K1-A CNC machine, year 1997. The machine has been regularly serviced and received a complete upgrade in 2015 directly by Hundegger (new software and new electronic components). 🔧 Machine Condition - Still in daily operation - Test run / demonstration available - Properly maintained and in excellent technical condition ⚙️ Equipment & Tooling - 5-axis saw unit Lodpfxjxyhmps Afzsrw - 4-axis universal milling unit - 2 vertical drilling units - 1 milling unit - 2 horizontal drilling units - Horizontal notching unit - 3-sided marking / drawing unit 📦 Upgrades (Hundegger, 2015) - New official Hundegger software - New electronic components - Improved accuracy, reliability, and performance

Condition: excellent (used), Year of construction: 2001, Shinohara 74-4 Lodpfexpgq Sex Afzerw Straight machine Year 2001 Impressions: 74 million Double impression cylinder Semi-automatic plate change IR drying Powder spray Automatic roller washing Automatic blanket washing Technotrans Plate punch and banding unit

Condition: new, Hulling Machine Machine task: Removal of seed hulls Materials that can be hulled: Spelt – emmer, einkorn, buckwheat, millet, sorghum, hemp, sunflower. Machine performance: LAH300 LAH400 efficiency broken grain rate - spelt: ~200-250 kg/h ~750 kg/h 85-98% 2-15% - millet: ~80-120 kg/h ~200 kg/h ~75-95% 5-15% - buckwheat: ~80-160 kg/h ~360 kg/h 70-85% 15% - hemp: ~80-120 kg/h ----- ~75-95% 5-15% - sunflower: ~150 kg/h ~300 kg/h 80% 5% Motor: 1.1 kW, 0.75 kW Main components of the machine: - Frame - Safety switch - Motor 380V or 220V - Stone housing - Hopper - Feeder - Stone gap adjuster - Frequency converter (speed controller) - Dust extraction system Lrodpfxexvxafe Afzow The machine frame is made of painted steel structure.

Condition: good (used), Year of construction: 1982, max. wheel diameter 600 mm gear width 500 mm max. module 15 min. module 1 total power requirement 2 kW weight of the machine ca. 2 t dimensions of the machine ca. 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles available on the cams and the ability to process internal gears, make the machine a universal machine suitable for machining small and large series. --> technical features Max module: 15 --> Max diameter: 600 mm --> Spindle/head speed: 1450 - 2100 - 2800 rpm --> Production output teeth per minute: 35 - 50 - 75 --> Motor output spindle: 2800 rpm - 1.5 HP --> Motor power piece rotation (self-braking): 1.5 HP --> Motor power automatic (self-braking): 0.35 HP --> Motor power cooling system: 0.25 HP --> Dimensions: 2000 x 1500 mm --> Total weight: 2000 kg Accessories Cam x 5 Indexing wheels Tools Serial no. 152/0589/94 Lodpfxewftuxs Afzerw Machine with full enclosure Counter support

Condition: used, Year of construction: 1989, table-size 1800 x 900 mm grinding range 1500 x 900 mm workpiece height 690 mm grinding length 1500 mm grinding width 900 mm table speeds 4 - 36 längs m/min table speeds 1 - 60 quer m/min grinding wheel size 500 x 100 x 203 mm grinding spindle speed 1000 U/min voltage 400 V total power requirement 80 kW grinding spindle drive 28 kW Lsdpoxukqaofx Afzjrw weight of the machine ca. 17 t Machine was complete refurbished and modernized in 2009/23. X-axe and drive were refurbished in 2023 and the machine got new magnetic chucks. Machine has cooling arrangement, dressing arrangement and auto. vert. feed. Machine has mechanical table drive and a Siemens Control.

Condition: used, Year of construction: 2000, Table size: 580 x 280 mm Drilling table height: 800 mm Drilling depth: 150 mm Drilling length: 225 mm Height adjustment: 180 mm Swivel range: 2x 45° Drill speed: 2800 rpm Wescute drill chuck: 0-20 mm Extraction port diameter: 80 mm Motor power: 2.2 kW / 3 HP Space required: 850 x 1000 x 1050 mm Weight: approx. 240 kg Storage location: Supplier Lrodpfx Aexya H Iefzew

Condition: good (used), Year of construction: 1995, functionality: fully functional, Approx. year of manufacture 1995 Lsdpfx Aexwc A Tjfzjrw

Condition: ready for operation (used), Year of construction: 2004, Immediately available ex location: Start hole EDM machine Sodick Type K 1 C Year of manufacture: 2004 CNC control X – act SDS 2 Workpiece dimensions: 250/350/300 mm Ledpfx Asxxuymjfzorw X/Y/Z travel: 200/300/300 mm Max workpiece weight: 100 kg C-axis indexing: 250 degrees Mos FET pulse generator Complete accessories Weight: 1000 kg Price: EUR 2,500 plus VAT ex location

Condition: used, Year of construction: 2008, Folding machine MBO K 800.2/4 S KTZ Year: 2008 Description: - 16 page folder - MBO Navigator Feeder - Round pile feeder: R 800 Lsdpfxoxd U Tkj Afzerw Folding unit MBO K 800.2/4 S KTZ - Parallel fold unit with 4 buckle plates - Second cross fold to the left / right - Noise hood over the entire folding section Excluding delivery

Condition: used, Year of construction: 2000, operating hours: 36,152 h, functionality: limited functionality, machine/vehicle number: 234-1651, film width: 540 mm, pressure: 10 bar, heating capacity: 13.9 kW (18.90 HP), - Automatic carton feed table with 3 loading positions - Longitudinal and cross cutter with EURO punching - 5 longitudinal cutting blades included - New discharge conveyor belt - New control panel Lredpfx Ajxxaq Defzew - Many spare parts available - Film rolls still available (not included) The machine is operational. However, functional failures are not uncommon.

Condition: excellent (used), Year of construction: 2018, operating hours: 20,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit SECHS ACHS Roboter Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2018 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 201 cm³ Spritzteilgewicht: 184 g/PS Schnecken DN 2: 25 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 54 g/PS Steuerung: SELGOCIA Ausstattung: Lredpou E Id Tofx Afzjw 3 x Kernzüge Vertikale Spritzeinheit Verlängerte Holme Vorverlegter Zylinder 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2018 Förderband Schutzzaun