Used Slot And Pin Machine for sale (72,343)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,000 h, functionality: fully functional, 1.1 Technical data: 1.1.1 Diameter of work-piece – mm– 1500 1.1.2 Height of work-piece – mm– 2800 1.1.3 Weight of work-piece (max)/ kg 2000 (at that maximum distance between the axes of castings is 1650 mm) 1.1.4 Energy demand 1.1.4.1 Electrical -Turbines – (8 pcs. х 22 kW– кВт) kW– 176 - Bucket elevator – (2 pcs. х 7,5 kW– кВт) kW– 15 - Rotation device of casting – (2 pcs.. х 0,75 kW– кВт) kW 1,5 - Double magnet drum-separator – (2 pcs.–шт. х 1,5 kW) kW 3 - Vibrating conveyor and sieve – (2 pcs. х 4 kW– кВт) kW– 8 - Dust aspiration – kW– 22 - Conveyor path – kW– 7,5 1.1.4.2 Compressed air demand – - pressure – bar 6 - quantity – m3/h 35 1.1.5 Abrasive charge – kg 8000 1.1.6 Projected productivity is 18-25 loads per hour (quantity of loads depends on the duration of cleaning chosen by operator and on chosen regime of work – finishing or rough treatment; thus, producer ensures productivity under performance specification not less than 22 castings per hour while descaling after normalization, annealing, as well as oxides, slag blanket, welded areas while finishing. – 1.2 Units of machine (given for each element separately) – 1.2.1 Machine house - Material of welded house – ST 54, thickness 16 mm - Wear plate material in house – manganese, thickness – 16 mm 1.2.2 Bucket elevator – (2 pcs. per machine) - Load capacity of 1 pc. – m3/h– 40 1.2.3 Shot material cleaner – (2 pcs. per machine) - Aspiration volume of 1 pc. – m3/h 2500 - Capacity of 1 pc. – t/h– 120 1.2.4 Double magnet drum-separator – Diameter mm– 300 Hfsdpfxjymwxps Agwsd 1.2.5 Dosing bulk – (2 pcs. per machine) - Volume of 1 pc. – m3 0,7 - Dosing valve pneumatics (different for under and overhead turbines) – 1.2.6 Turbines – Турбины (8 pcs. per machine ) - number piece 8 - type ABR-501 - diameter– диаметр mm– 500 - wheel rotations/min 1/min– 2600 - motor power kW– кВт 22 - abrasive capacity kg/min/each– 350 1.2.7 Conveyor-path - Load capacity per length kg/m– 3000 1.2.8 Movable trolley– (12 pcs.) - Load capacity ton 2 - Distance between the axes of hangers max 1650 mm 1.2.9 Dust aspiration - Air to be aspirated m3h 25000 - Filter tip APSZ 24 - Cartridge surface m2 504 - Fan motor power kW 22 1.2.10 Electrical box - mains voltage V 3 x 400 - control voltage V 24 - frequency Hz 50 1.2.11 Vibrating sieve load capacity – (2 pcs. per machine) t/hour 140

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,000 h, functionality: fully functional, 1.1 Technical data: 1.1.1 Diameter of work-piece – mm– 1500 1.1.2 Height of work-piece – mm– 2800 Hfjdjymww Sopfx Agwjd 1.1.3 Weight of work-piece (max)/ kg 2000 (at that maximum distance between the axes of castings is 1650 mm) 1.1.4 Energy demand 1.1.4.1 Electrical -Turbines – (8 pcs. х 22 kW– кВт) kW– 176 - Bucket elevator – (2 pcs. х 7,5 kW– кВт) kW– 15 - Rotation device of casting – (2 pcs.. х 0,75 kW– кВт) kW 1,5 - Double magnet drum-separator – (2 pcs.–шт. х 1,5 kW) kW 3 - Vibrating conveyor and sieve – (2 pcs. х 4 kW– кВт) kW– 8 - Dust aspiration – kW– 22 - Conveyor path – kW– 7,5 1.1.4.2 Compressed air demand – - pressure – bar 6 - quantity – m3/h 35 1.1.5 Abrasive charge – kg 8000 1.1.6 Projected productivity is 18-25 loads per hour (quantity of loads depends on the duration of cleaning chosen by operator and on chosen regime of work – finishing or rough treatment; thus, producer ensures productivity under performance specification not less than 22 castings per hour while descaling after normalization, annealing, as well as oxides, slag blanket, welded areas while finishing. – 1.2 Units of machine (given for each element separately) – 1.2.1 Machine house - Material of welded house – ST 54, thickness 16 mm - Wear plate material in house – manganese, thickness – 16 mm 1.2.2 Bucket elevator – (2 pcs. per machine) - Load capacity of 1 pc. – m3/h– 40 1.2.3 Shot material cleaner – (2 pcs. per machine) - Aspiration volume of 1 pc. – m3/h 2500 - Capacity of 1 pc. – t/h– 120 1.2.4 Double magnet drum-separator – Diameter mm– 300 1.2.5 Dosing bulk – (2 pcs. per machine) - Volume of 1 pc. – m3 0,7 - Dosing valve pneumatics (different for under and overhead turbines) – 1.2.6 Turbines – Турбины (8 pcs. per machine ) - number piece 8 - type ABR-501 - diameter– диаметр mm– 500 - wheel rotations/min 1/min– 2600 - motor power kW– кВт 22 - abrasive capacity kg/min/each– 350 1.2.7 Conveyor-path - Load capacity per length kg/m– 3000 1.2.8 Movable trolley– (12 pcs.) - Load capacity ton 2 - Distance between the axes of hangers max 1650 mm 1.2.9 Dust aspiration - Air to be aspirated m3h 25000 - Filter tip APSZ 24 - Cartridge surface m2 504 - Fan motor power kW 22 1.2.10 Electrical box - mains voltage V 3 x 400 - control voltage V 24 - frequency Hz 50 1.2.11 Vibrating sieve load capacity – (2 pcs. per machine) t/hour 140

Condition: good (used), Dumor Lightning Fold Pro 8335B+33KF Automatic Creasing and Folding Machine The machine is fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and folding system on the market, with a robust construction. High-stack vacuum feeding. Built-in vacuum and suction systems. An instruction manual is included. The 7-inch color Smart Screen programmer allows for easy machine setup. Technical specifications: Paper thickness: 0.15-0.35 mm Feeder capacity: 100 mm Accuracy: +/- 0.5 mm Format range: 140×160 mm, 330×650 mm Paper type: coated, uncoated, laminated, UV varnished, photo Creasing blade width: 1.0 mm, 0.6 mm, and 1.4 mm Speed: 6300 sheets/hour (A4/1 fold) Number of creasing strokes per pass: up to 32 (creasing-only mode) Control: dual 7-inch touchscreen Predefined fold types: 7 types + custom folds Number of folds: 1 or 2 Folding method: folding knife Automatic paper length measurement: YES High-performance upper suction feeder: YES Patented breaker knife system: YES Creasing depth adjustment: YES Hjdpoyur Axjfx Agwofd Weight: 280 kg,

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools Hedpfx Agsh Aw Rnswsfd While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 290 kg, input voltage: 400 V, total length: 800 mm, total width: 750 mm, total height: 1,550 mm, We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia – used by hundreds of companies across Europe. For 15 years we have focused on quality, precision, and reliability. Technical data: Maximum stroke: 125 mm Minimum stroke rate: 60 strokes/min Maximum stroke rate: 350 strokes/min Number of speed steps: 6 Head rotation angle: 90° Table size: 500 × 200 mm Table travel X/Y: 220 mm Z-axis travel: 200 mm Motor power: 0.37 kW Overall dimensions: 800 × 750 × 1550 mm Weight: 290 kg Tool shank diameter: Ø10 / Ø16 mm Delivery conditions: Machine is brand new Hjdpfxeyux E Ho Agwjfd 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Operating manual (DTR) in English Delivery to the customer is possible. The delivery price is determined individually according to the carrier’s quotation. If you are interested in other machines, we encourage you to visit our website.

Condition: new, Year of construction: 2026, Number of boring spindles 1 St. Boring depth max. 150 mm Motor output 1,5 kW Hjdpfeytx Uxsx Agwefd

Condition: new, Year of construction: 2026, Number of boring spindles 1 St. Boring depth max. 150 mm Motor output 1,8 kW Götzinger HR 150 - Hoffmann system Hjdpfx Asytx T Isgwofd The machine that gives you the highest precision when drilling two levels guaranteed. Frame and slot drilling machine, enables drilling in two levels in one clamping. - Well thought-out, precise and practical stop system - particularly smooth and play-free grid positioning, Feed and transverse adjustment - Guidance systems for the highest demands - Special drill chuck - precise, quiet concentricity - for drilling levels via digital display - Two side stops offer enormous advantages, center stop on request - Continuous front stop with position markings - Drilling pattern depending on the wood profile - free choice, in a 12 mm grid Special grids also possible - integrated dust extraction - the exchangeable additional equipment (e.g. drill heads, Miter stops, parapet railing device, side and folding stops) can be easily installed without tools. and dismantle. Technical data: Drilling unit ----- Height adjustment in 2 levels via digital display Height adjustment 100 mm pneumatically Drilling stroke/depth 150 mm by hand Transverse adjustment 320 mm via grid Drilling pattern width 12 mm pitch, standard Three-phase motor 230/400 V, 50 Hz, 1,420/2,840 rpm, 1.3-1.8 KW Tool holder ----- Special drill chuck with 2 tool changing inserts 1 x M10, 1 x D 16 stop system ----- 2 side stops can be swiveled in/out 1 longitudinal stop (tube) with adjustable folding stop approx. 1500 mm Elongated hole stop left and right Workpiece clamping ----- pneumatically via foot valve Dust extraction Special accessories - see PDF attachment (technical data according to manufacturer - no guarantee!)

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,270 mm, total width: 1,100 mm, total height: 1,700 mm, Metal Technics Polska Professional CNC machines, lasers and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe and Asia – used by hundreds of companies across Europe. For over 12 years we have focused on quality, precision and reliability. METAL SLOTTING MACHINE B5016C – STROKE 160 mm METAL SLOTTING MACHINE B5016C A machine designed for machining various internal and external surfaces, especially keyways. It is widely used in maintenance workshops and tool rooms. Technical Specifications Parameter Specification Maximum ram stroke 160 mm Hodpfxsyuc D Te Agwefd Number of strokes per minute 23 / 32 / 44 / 48 / 67 / 92 Worktable diameter 350 mm Vertical ram adjustment 160 mm Distance from tool holder to column 485 mm Distance from table surface to ram body 320 mm Maximum longitudinal table travel 360 mm Maximum cross table travel 320 mm Maximum table rotation angle 360° Maximum tool size 25 × 40 mm Maximum table load 300 kg Maximum slotting force 4.5 kN T-slot width in worktable 14 mm Main motor power 1.5 kW Overall dimensions (L × W × H) 1270 × 1100 × 1700 mm Weight 1400 kg Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Operation manual (English) Delivery to the customer is possible. The transport cost is calculated individually by the shipping company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, Year of construction: 2025, heavy-duty construction with cast iron table smooth movements using hand lever and handwheel eccentric clamping device dowel drilling unit with 16-22-25-32 mm grid 2 spindle speeds: 1500/3000 rpm WESCOTT drill chuck 1 - 16 mm CE compliant Work table dimensions: 287 x 550 mm Hfjdpfjycg U Eex Agwsd Longitudinal travel: 200 mm Vertical travel: 160 mm Cross travel: 125 mm Three-phase motor power: 1.8 kW, 400 V, 50 Hz

Condition: used, Year of construction: 1993, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Hjdpfxewhuu Es Agwjfd Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.3 / 1.8 kW Speed: 1400 / 2800 rpm Holder clamp: manual Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Hfsdpfx Aov S Diujgwjd Machine width: 960 mm Weight: 250 kg

Condition: as good as new (ex-display), Year of construction: 2022, Dowel hole drilling device: Pitch 16, 22 25, 32 Drilling depth: 150 mm Slot length: 250 mm Height adjustment range: 145 mm Hedpogzlq Esfx Agwefd Motor power: 1.5 kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 160 kg

Condition: new, Year of construction: 2022, Dowel hole drilling device: no Drilling depth: 150 mm oblong hole length: 180 mm Hedpfsgq Un Aox Agwjfd Height adjustment travel: 145 mm Motor power: 1,5kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg

Condition: good (used), For sale is a Bernardo slot mortising machine LBM 150. The machine is in good condition and has been reconditioned and inspected by our specialist staff. (Fully functional) Technical specifications: - Drill table size: 500 x 210 mm - Max. drilling depth at 90°: 150 mm - Drilling width: 300 mm - Height adjustment: 140 mm - Speed: 2850 rpm - Drill chuck: 16 mm - Extraction connection D = 100 mm - 2.2 kW (3.0 hp) - Row drilling attachment The machine is located in A-8561 Söding and can be viewed and collected at any time during our business hours. Subject to prior sale! Related terms: pillar drill, bench drill, drill, slot mortising machine, drilling machine Hfodpoym U Hkofx Agwed Reference: R-N44Z5

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026, or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Dimensions & Weight Hsdpoyn Ecxjfx Agwofd Dimensions (L x W x H): 4000 x 1000 x 1600 mm Machine weight: 400 kg EQUIPMENT Support surfaces on the right and left External reference: Groven - Lot 8

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. Hfsdoyq Rkyjpfx Agwsd The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: used, Year of construction: 2000, Table size: 580 x 280 mm Drill table height: 800 mm Drilling depth: 150 mm Drilling length: 225 mm Height adjustment: 180 mm Swivel range: 2x 45° Drill speed: 2800 rpm. Wescute drill chuck: 0-20 mm dia. Extraction port: 80 mm dia. Motor power: 2.2 kW / 3 HP Space required: 850 x 1000 x 1050 mm Weight: approx. 240 kg Storage location: Nattheim Hedpoxya H Ijfx Agwofd

Condition: ready for operation (used), - invoersysteem voor plat- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 cap: 220 ton maximale lengte: 15 200 mm breedte/dikte: 500/25 mm hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 cap: 240 ton maximale lengte: 15 200 mm 200 x 200 mm / 16 mm Hydraulisch ponsen VPO 1000 Hfedpjwlkw Dsfx Agwed cap: 100 ton ponsdiameter/dikte: 57/15 mm of 32/25 mm 4 ponsunits voor vlak staal (Verticale positie) 1 ponseenheid voor hoekstaal (horizontale positie) incl. gereedschap Hydraulische teller VNI 1/36 1 codeerschijf 36 tekens tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 37 kW - 250 bar

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Tool travel : 0-315 mm Strokes per minute : 14 - 60 Hedpfovfctfsx Agwefd Ram adjustment : 235 mm Swivel angle of head : ±45° Head to table distance : 510 mm Tool to column distance : 460 mm Diameter of rotating table : 450 mm Diameter of central hole of rotating table : 80 mm Number of fixed positions of rotating table : 24 Longitudinal travel of worktable : 265 mm Transverse travel of worktable : 200 mm Self-breaking main motor : 4 kW / 5.5 h Weight : 1310 kg Overall dimensions : 1000 x 1500 x 2250 mm

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new; the machine comes from a very small joinery and was used only very little. The machine is in its original state and has only been cleaned, with no touch-ups to the paint. You can mill slots and drill dowel holes on two levels without having to reclamp the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill slots, for example for lock cases and similar applications, or make all types of frame dowel joints, at right angles, butt joints, or mitred joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar applications. By drilling on two levels, using the stops and indexing rails, and due to the machine’s design, dowel joints can be produced in a very short time, which makes the machine highly efficient. The machine requires a compressed air connection of 6 bar (air consumption is very low). Right-hand rotation. Mills and drills very efficiently and cleanly. Supplied with 2 angle stops (one center stop and one side stop, which can be used on either side), plus a mitre stop. On the front of the machine table, there is a 2000mm long stop rail with 2 flip stops; the stop rail can be shortened or extended if required. Workpiece clamping is done with 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic; the pneumatic switch is located at the front of the machine, ensuring rapid adjustment of the index positions and drilling levels. Equipped with a precision 12mm indexing rail, featuring a center index and 12 indices left and right. Can be quickly converted for slot milling; in this mode, the machine can be used without indexing, with 2 adjustable stops left and right, allowing for a maximum working width of 420mm. Maximum drilling hole height: 100mm Hfodpfx Ageynv E Rewod Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything functions perfectly. The machine is personally delivered and demonstrated by us anywhere in Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible on request. The machine table is 870mm wide, 140mm deep at the sides, and 350mm deep in the center. Professional equipment, not DIY store scrap. Ready for immediate operation. With 2-jaw drill chucks up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushings are in excellent condition and move smoothly.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, Dowel and mortise drilling machine HOFFMANN HR 150 Very good condition, as new. The machine comes from an installation company and shows virtually no signs of use—absolutely like new. It was only used for minor modification work and is now being sold because it has been idle for the last few years. With this machine, you can mill mortises and drill dowel holes on two levels without reclamping. Supplied with documentation. - 380V, 1500W - 2840 RPM - Year of manufacture: 1997 With the machine, you can mill mortises for lock cases and similar applications, create all types of frame dowel joints at right angles, butt joints, and miters. Ideally suited for dowel joint production in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar uses. Thanks to two-level drilling, indexing stops, and machine design, dowel joints can be produced in the shortest time possible, making the machine highly economical. Requires 6 bar compressed air connection (very low air consumption). - Right-hand rotation - Mills and drills precisely and cleanly - Fitted with mobile base - Two stops left and right on the machine table; an additional 45° miter stop is included - Two fold-out workpiece supports - Comes with 3 drill chucks: for drills with a 16 mm or 12 mm shank, and for drills with M10 thread - Workpiece clamping is achieved with two pneumatic cylinders operated via foot pedal, allowing you to hold the workpiece with both hands - Height adjustment between drilling levels is also pneumatic; the control switch is positioned at the adjustment lever for the indexing rail, ensuring quick changeover between indexing positions and drilling levels - Equipped with a precision 12 mm indexing rail with a center position and 13 stops left and right - Both drilling levels feature highly accurate counters, allowing for quick, easy, and precise setting of each drilling level height - Can also be used as a mortise drilling machine, with two adjustable stops left and right, providing up to 500 mm of lateral travel - The machine features a fence at the front of the table, height-adjustable as needed - Max hole height approx. 100 mm - Max drilling depth approx. 150 mm, with depth stop - Max workpiece height approx. 250 mm - All functions operate perfectly The machine can be personally delivered and demonstrated anywhere in Germany for 220.00 EUR, so you take no risk with your purchase. Delivery to Austria, Switzerland, and the rest of Europe is also possible. Machine table is 1,100 mm wide and 250 mm deep Professional-grade machine, not DIY store quality Ready for immediate use Very robust and durable construction Precision guides with play-free ball bearing bushings are in perfect working order and move smoothly Very stable and torsion-resistant design Hsdpfeyhzilox Agwsfd

Condition: excellent (used), Type of machine: Vertical shaper Manufacturer: WMW MEUSELWITZ Model: STSR400 Year of manufacture: 1978 Control: Conventional Country of origin: Germany Hfsdpoyr S S Usfx Agwed Freight terms: Loaded free on truck, location Rostock, unpacked Location: Rostock Price: On request Technical details Maximum ram stroke: 450 mm Throat depth: mm Table diameter: 800 mm Minimum ram stroke: 65 mm Maximum workpiece height: 600 mm Ram adjustment: 600 mm Number of ram strokes: 18; 22; 28; 35; 45; 56 strokes/min. Table cross travel: 800 mm Table longitudinal travel: 1000 mm Table rotation: 360° Feed (per stroke, table): 0.14 - 0.22 - 0.35 - 0.56 - 0.9 - 1.4 mm/stroke Total power requirement: 7.8 kW Machine weight approx.: 6.25 t Machine dimensions (LxWxH): 2.8 x 1.9 x 3.0 m Additional information Further features: Ram: - The chisel can be adjusted in the 900 mm throat - Bed throat = 700 mm Tool clamping by strap clamp (dimensions 350 x 250 mm) Accessories: 1 piece 3-jaw chuck Ø 250 mm

Condition: used, used, good condition, low operating hours, with accessories with pneumatic lift for drilling on two levels Make: Ganner Model: Junior Motor: 1.5 kW Two-lever operation Table size 850 x 360 mm Drill chuck 20 mm Dowel drilling device with 24 positions Workpiece stop Central stop Pneumatic lift Pneumatic workpiece clamps, 2 pcs Space requirement approx. 300 x 1000 x 1300 mm Weight approx. 270 kg Hfedpfx Ajythcrjgwjd Storage location: 97447 Gerolzhofen, free loading, unpacked Delivery in current condition as inspected, function tested without overhaul, without guarantee or warranty

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Hjdpfothuzpox Agwjfd Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Hodpfx Ajd Dk A Asgwefd Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.