Used Cable Slot Machine Superior K 74 for sale (98,903)

Condition: excellent (used), Year of construction: 2010, Heidelberg SM 74-5-PH Format: 530x740 mm year: 2010 Gjdpfxsxivgvs Aabjkc counter: 86 million thickness: 0.03 to 0.6 mm 5 colors high pile delivery: 1,000 mm perfector 2/3 max speed: 15,000 sheets/h Sheetfed Control Print Press Center desktop with software

Condition: excellent (used), Beading machine 1.25 mm Throat depth 200 mm Model S50K Infinitely variable speed Shaft diameter 30 mm Gedpfxow Stqrj Aabokc Spindle diameter 20 mm Length 25 mm 380 Volt Transport dimensions: Height 1300 mm Width 450 mm Depth 600 mm Weight 175 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, STC-Ref:G-012-3717 MBO K-800.2 MWKS - KTL/4, Year: 2005 format: 800x1200 mm equipped: - 16 pages A4 - perforating shaft - without delivery - pallet feeder FP-800.2/120 - 1st folding unit: 2 buckle plates - noise hoods - Control system NAVIGATOR control - Parallel Falzwerk mit 4 Falztaschen - cross fold unit links/rechts --- left/right Gedpfexaurrsx Aabskc - touchscreen - without compressors: Seller had centralised air-supply !! - batch counter --> available: 09/2025

Condition: used, Year of construction: 2008, Folding machine MBO K 800.2/4 S KTZ Year: 2008 Description: - 16 page folder - MBO Navigator Feeder - Round pile feeder: R 800 Folding unit MBO K 800.2/4 S KTZ - Parallel fold unit with 4 buckle plates - Second cross fold to the left / right - Noise hood over the entire folding section Gjdpfx Aajxd U Tkebskc Delivery Palamides Alpha 500 Year: 2007 - Vertical stack delivery with pressing

Condition: used, Year of construction: 1982, grinding length:500 mm grinding width:225 mm workpiece height:400 mm total power requirement:5,5 kW Gkodpfxocxxtmo Aabjc weight of the machine ca.:3,4 t NC81 NC-control, table belt drive 100-25000 mm/min., automatic feed, electronic dressing unit 020 NC-K with RPM-compensation, coolant pump, emergency cut-off

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: Frenco URM-K Typ HGM 38101, For sale here is a Frenco gear measurement machine URM-K (Universal Rotational Measurement with Measuring Balls), type HGM (Horizontal, Counter-Centre, Manual) from the year 2000. The device has been out of operation for a long time. When powered on, the error 'A disk read error occurred' appears. Price is negotiable. Gedexli Acepfx Aabekc

Condition: ready for operation (used), Year of construction: 2004, Immediately available ex location: Sodick hole drilling EDM machine Type K 1 C Year of manufacture 2004 CNC control X – act SDS 2 Workpiece dimensions 250/350/300 mm Travel paths X/Y/Z 200/300/300 mm Max. workpiece weight 100 kg C-axis indexing 250 degrees Mos FET pulse generator Complete accessories Weight 1000 kg Gjdpexld A Rsfx Aabokc At a price of EUR 3,000 – plus VAT, ex location

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Gedpexdttpefx Aabokc Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: used, Year of construction: 2010, Technical data: - Wescott drill chuck 0-20 mm - Cross travel 250 mm - Depth travel 215 mm - Height adjustment 165 mm - Tiltable drilling unit 45°-90°-45° - Extraction connection 100 mm - Table size 600 x 320 mm - Working height 870 mm - Motor 2.2 kW (3.0 HP) / 400 V - Speed 2840 rpm - Single-lever operation - Drilling unit tiltable to both sides - Dowel drilling device with 4 index positions: 16-22-25-32 mm - Height adjustment via handwheel - Eccentric clamp - Extendable table extension - Mitre stop - Dimensions L=1160, W=750, H=1080 mm - Weight 260 kg Storage location: Nattheim Gedpsxcmv Ujfx Aabjkc

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18E1879, BIZERBA refrigerated meat grinder FW-K 22 - C-E R22 BW Gkjdpfoxgpadox Aabjc Purchase date: end of 2022

Year of construction: 2023, condition: new, We have shredders and other recycling machines for all types of recycling in stock in Heilbronn From copper recycling to plastic recycling, you can purchase all machines from us. Please feel free to ask us. ‼️KANN VISIT US ON SITE WERDEN‼️ We would be happy to give you a live demonstration of the machine in Leingarten! By appointment only! We are in Heilbronn, German company, German laws, warranty and service! We also speak English! Simply professional copper extraction for cables from 1.5mm to 120mm! ➡️Mit UVV (accident prevention regulations) carried out here by a German company Our cable peeling machine Josan S120! ▶️Gewicht approx. 236 kg This allows you to recycle cables quickly and inexpensively and recover pure copper. Very fast processing. Powerful 3 kw motor. Built to last. Take a close look at the machine in the pictures. You are also welcome to visit us live in Leingarten (by appointment only). Net 3.999,00€ +19% VAT 759,81€ Gross 4.758,81€ As we recycle ourselves, we can also demonstrate our machines to you by appointment. CE-certified machines from us. Gkjdpfx Aep E Einsabsc ‼️Bei If you have any further questions, please contact us! We can only answer you if you contact us with your name, address, email and telephone number. Everything else will be lost as spam. We will get back to you and advise you in advance! ‼️ Pictures/equipment/price may vary. Errors excepted

Condition: used, Technical data: Speed: 3000 1/min Connection: 400 V Motor power: 0,37 kW Dimensions, approx.: 680 x 380 x 380 mm Godepz Ibwopfx Aabjkc

Condition: used, Roller sets for section bending machine, 3-roll ring bending machine HERKULES WETZLAR The rollers fit a section bending machine HERKULES WETZLAR type BO 238 N Shaft diameter: 60 mm with 18 mm keyway 2 rollers set No. 1, roller diameter = 110 mm, roller width = 180 mm 2 rollers set No. 2, roller diameter = 160 mm, roller width = 40 mm Gkodpjglaq Iofx Aabec 3 rollers set No. 3, roller diameter = 150 mm, for tube diameter Ø 33 mm, roller width 87 / 115 mm - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm without keyway The machine had 2 driven rollers Total weight of all rollers: 57 kg Good condition

Condition: good (used), functionality: fully functional, Year of construction: 1989, sheet thickness steel (max.): 6 mm, table height: 900 mm, power: 4 kW (5.44 HP), overall weight: 2,150 kg, total length: 1,550 mm, total width: 1,200 mm, total height: 1,350 mm, cutting length (max.): 200 mm, Hydraulic notching machine, adjustable angle 30-120°, cutting capacity 6 mm, cutting length 200 mm, punching station on the back siede, footpedal, accessoires Gsdevkg Nujpfx Aabokc

Condition: used, Year of construction: 2010, Technical data: - Wescott drill chuck 0-20 mm - Cross travel 250 mm - Depth travel 215 mm - Height adjustment 165 mm - Swiveling drilling unit 45°-90°-45° - Extraction port 100 mm - Table size 600 x 320 mm - Working height 870 mm - Motor 2.2 kW (3.0 HP) / 400 V - Speed 2840 rpm - Single-lever operation - Drilling unit swivels to both sides - Dowel drilling device with 4 index positions: 16-22-25-32 mm - Height adjustment via handwheel - Eccentric clamp - Extendable table extension - Mitre fence - Dimensions L=1160, W=750, H=1080 mm - Weight 260 kg Storage location: Nattheim Gedpfx Aexcmv Ijabokc

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight. Gedpfx Aaeq Nn Hcjbjkc

Condition: used, Year of construction: 1998, Technical details: balancing body max.: 3000 kg balancing body diameter w/o machining unit: 1600 mm balancing body diameter with machining unit: - mnm Bearing journal Ø: 15 - 120 / 120 - 240 mm distance of bearings: 2750 mm balancing body diameter: 160 - 350 mm roll diameter: 20 - 120 mm Balancing revolution per minute: ca. 100-1000 U/min bed length: 3000 mm voltage: 400/50 V/Hz drive power: 15 kw accuracy +/-: 0,01 g/mm dimensions electric cabinet: 1200 x 1900 x 500 mm temperature range: 5-35 °C Protection class: IP 54 electrics - voltage/frequency: 400 / 50 V/Hz rated current: 36 A control voltage: 24 V dimension machine xH: 4,10 x 1,20 x 1,40 m Weight approx.: - t The hard-mounted horizontal machine TIRA K3000G is universally applicable and is suitable Gkodpfow Uir Dsx Aaboc for balancing roller-shaped rotors with their own shaft journals and disc-shaped rotors with auxiliary shafts. The machine is designed for high-precision measurements and for a wide range of rotors. *

Condition: used, Year of construction: 1991, functionality: limited functionality, machine/vehicle number: 1155, type of input current: three-phase, Packaging machine DIENST, model HK-II-N-K-14", year of manufacture 1991 Gsdpexhfgcefx Aabekc

Condition: used, Year of construction: 2004, machine/vehicle number: P 04-09-002, neu U05 10 001, Spraying machine Venjakob VEN SPRAY-K All pictures only for example - Producer Venjakob - Year of construction 2004 - Working width 800 mm (1000) mm - Operating side, right - Duo gun drive system - Dry filter system 4.000 m³/Std. - Diameter exhaust air pipe 400 mm - Transport belttransport System - Feed speed adjustable 3 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system LS 1 - Number of installed lacquer circles 1 Stk. - Airless spraying system 4 Stk. Krautzberger KAA 1300 - Number of lacquer pumps 1 Stk. - Producer lacquer pump Wagner 35-70 - Suitably for solvent based lacquer - Suitably for water based lacquer - Total connection power 7 kW, Stromaufnahme 17 A , Absicherung 35 A Gsdpfx Asumvr Teabekc - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: excellent (used), Year of construction: 2022, Used edge banding machine - OLIMPIC K 360 R - Year of manufacture: 2022 - Available from November 2025 Gjdpfxexhc Evo Aabskc - additional photos/video available

Condition: good (used), Year of construction: 1997, functionality: fully functional, Slot and dowel boring machine Pneumatic drilling motor, height adjustable Gksdpfx Asxf Udfjabec The machine is ready for immediate use!

Condition: excellent (used), Year of construction: 2008, Ferromatik Milacron Gsdpfevk Dbzjx Aabekc Type: K-TEC 85-S Injection molding machine (85 tons) Serial number: 522500 Year of manufacture: 2008 Machine weight: 5,500 kg Screw diameter: 25 mm Clamping force: 850 kN Operating hours: 24,386 h. Powered up

Condition: used, Year of construction: 2001, Empty weight: 5.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Number of milling spindles [pcs.]: 1 - Number of controlled axes [pcs.]: 3 - Type milling table: Beam table - Drilling unit present: Yes - Horizontal drill spindles [pcs.]: 18 - Vertical drilling spindles [pcs.]: 6 - Tool changer positions [pcs.]: 14 - Year: 2001 - Documentation available: No - CE marking present: Yes - Serial number: AL/6222 Godpfoxbzg Esx Aabskc - Voltage [V]: 400 - Current consumption [A]: 32 - Power [kW]: 26.0 - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 1982, max. wheel diameter 600 mm gear width 500 mm max. module 15 min. module 1 total power requirement 2 kW weight of the machine ca. 2 t dimensions of the machine ca. 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles available on the cams and the ability to process internal gears, make the machine a universal machine suitable for machining small and large series. --> technical features Max module: 15 --> Max diameter: 600 mm --> Spindle/head speed: 1450 - 2100 - 2800 rpm --> Production output teeth per minute: 35 - 50 - 75 Gedpfjwftuxox Aabokc --> Motor output spindle: 2800 rpm - 1.5 HP --> Motor power piece rotation (self-braking): 1.5 HP --> Motor power automatic (self-braking): 0.35 HP --> Motor power cooling system: 0.25 HP --> Dimensions: 2000 x 1500 mm --> Total weight: 2000 kg Accessories Cam x 5 Indexing wheels Tools Serial no. 152/0589/94 Machine with full enclosure Counter support

Condition: used, Year of construction: 2020, gebraucht 2020 Gedpfx Aaowirk Hebskc 8208 prompt, Zwischenverkauf v Taiwan 44900 € 1 3100 mm 3.5 mm Hydraulisch 135 ° 4300 mm 1770 mm 1890 mm 4520 kg 800 mm MINT CONDITION 2 axes CNC control Schneider 7 "touchscreen segmented tool(6x150, 10x125, 5x100, 6x75mm segmented) motorized backgauge 800 mm user manual in GERMAN and English