Used Canned Filling for sale (28,609)

Year of construction: 2016, condition: used, machine/vehicle number: AT65, Technical Specifications & Performance Data The PakTech CCA 120 is a compact, high-reliability can holder applicator designed to apply plastic carriers to beverage cans with consistent accuracy. As part of a used bottling line or canning line, this second hand unit brings proven PakTech engineering to industrial packaging environments seeking dependable multipack presentation. Manufacturer: PakTech Model: CCA 120 Chjdpj Adyxcjfx Agmod Year: 2016 Machine type: Can Holder Applicator Nominal speed: up to 120 cans per minute (format and line conditions dependent) Container types: Aluminum beverage cans Formats: Compatible with common PakTech carrier styles and multipack configurations (subject to tooling and kit; verify in manuals) Dimensions: Width 2440 mm, Length 1230 mm, Height 1500 mm Electrical: 220V Safety features: Integrated guarding and protections Documentation: Manuals available Advanced Automation & Control Systems Engineered for continuous, reliable operation in beverage production, the CCA 120 delivers automatic carrier application synchronized with upstream and downstream conveyors. An operator-friendly control interface and robust logic control typical of PakTech systems support straightforward setup, monitoring, and troubleshooting. The 220V electrical configuration simplifies integration into existing packaging halls, while comprehensive safety guarding and interlocks protect operators during operation and changeover. Emergency stop circuitry, safety shields, and clear access points are designed to meet modern industrial packaging practices. The included manuals support parameter configuration, maintenance, and format adjustments. Production Line Integration Capabilities This applicator is ideal for positioning downstream of can rinsing and filling, after seaming/capping and labeling/coding, and before case packing, palletizing, or tray loading. It integrates seamlessly with conveyors and control signals on a used bottling line and is suitable for second hand systems handling a variety of beverage SKUs. Changeovers between carrier formats are supported with appropriate tooling, enabling agile response to production needs for beer, cider, soft drinks, energy drinks, water, juice-based RTDs, and similar products. While optimized for aluminum cans, the applicator complements broader lines that may also process PET and glass containers upstream in filling, labeling, capping, and rinsing stages. Machine Condition & Maintenance History Condition is in storage, with the machine currently disassembled. Safety features are included, and manuals are available to facilitate re-commissioning. Assorted spare parts are noted as available. As with any second hand equipment, inspection and verification of specific format kits, wear parts, and controls are recommended prior to integration into your industrial packaging environment. Operational Performance & Versatility The CCA 120 is designed to apply PakTech-style carriers accurately and gently, promoting product stability and consistent pack appearance. Its compact footprint makes it ...

Condition: used, Year of construction: 2016, machine/vehicle number: M296, Used Filling Monoblock ALFATEK Elvira for beer 2000 bph General Characteristics of the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph The Used Filling Monoblock ALFATEK Elvira for beer 2000 bph serves as a filling system specifically designed for bottling beer in glass containers, ideal for artisanal or semi-industrial production lines. Alfatek built the unit in 2016, and the Elvira 3/9/1 model handles a production speed of 2000 bottles per hour in the 33 cl format, while also supporting the 75 cl format. Therefore, it meets the needs of breweries with varying product volumes. Moreover, its configuration allows easy integration into existing lines. In particular, this monoblock suits breweries focused on maintaining product quality. Mechanical Configuration and Working Direction The machine operates with a clockwise rotation and includes certified safety guards, which ensure compliance with workplace safety regulations. Furthermore, the safety system prevents accidental operator contact with moving parts. Currently, the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph remains offline but fully functional. In addition, all technical manuals are available, and the system has undergone regular maintenance and revision. As a result, the machine retains its mechanical integrity. Thus, it stands ready for immediate use upon installation. Light Pressure Filling System At the core of the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph lies the filler with 9 valves, configured for light pressure filling. Notably, this system is ideal for beer, as it preserves carbonation and minimizes agitation. Consequently, it prevents foaming and ensures a clean fill level. The system ensures precision, consistency, and compatibility with 33 cl and 75 cl glass bottles. Additionally, operators can clean and maintain the valves with ease. In other words, this machine simplifies process control. Therefore, it supports stable and hygienic production. Single-Head Capper for Two Cap Sizes The capping unit, integrated into the monoblock, features a single head for crown caps, compatible with 26 mm and 29 mm diameters. The capper, manufactured by AROL, offers high reliability and synchronizes perfectly with the filling phase. Moreover, its construction ensures durability even under regular use. As such, it guarantees a secure seal for each container. Besides that, the capper minimizes the risk of misalignment. For this reason, many small breweries prefer this model for its simplicity and efficiency. Chodpfx As Adt Tasgmod Product Application and Container Type Manufacturers designed the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph specifically for beer bottling in glass containers. The machine does not support plastic or can formats. Because of this, it best suits craft breweries seeking high-quality packaging solutions. The light pressure filling system preserves the beer’s organoleptic properties and maintains its effervescence. In contrast, gravity filling would compromise carbonation. Therefore, this setup remains optimal for delicate products. Furthermore, the glass packaging ensures longer shelf life and consumer appeal. Operational Condition and Spare Parts The monoblock remains in good working condition and is available for functional testing. Even though it is no longer in production, it maintains its full operability. A full set of origi...

Condition: used, Year of construction: 2006, machine/vehicle number: M293, Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph Introduction to the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph offers a compact and high-performance solution for bottling still wine. Bertolaso, a renowned manufacturer, built this specific model, the Miniblock Olimpia 12/12/1, in 2012. Consequently, the machine combines rinsing, filling, and capping functions into a single, efficient structure. Operating performance of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph processes 2500 bottles per hour and operates in a clockwise direction. Moreover, the system includes complete safety protections that comply with current industrial machinery standards. It also comes with technical manuals and full revision documentation. Therefore, operators can manage installation and maintenance activities efficiently. Operational status and production applications The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph currently runs in production and bottles still wine. Specifically, its rinsing unit uses 12 grippers and performs a single treatment cycle to clean containers internally before filling. Consequently, it ensures high hygiene standards. In addition, the modular construction allows easy adaptation to different production requirements. Technical specifications of the filler The filling section of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph features 12 valves. Particularly, the system fills containers using a light vacuum method, which preserves the wine’s organoleptic properties. Furthermore, the use of fixed valves ensures reliable performance and simplifies maintenance procedures. Thus, the machine minimizes downtime during cleaning or part replacement. Capping system of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph The capping unit of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph applies flush corks using a single capping head. As a result, it maintains consistent sealing quality across all bottles. It handles corks with a 26-millimeter diameter, maintaining compatibility with common industry standards. Similarly, the PLC-based control system by Siemens ensures high automation precision. In fact, it guarantees seamless operation even during extended production shifts. Therefore, companies can integrate the monoblock into automated bottling lines without requiring major modifications. Dimensions and configuration of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph Chodpjx H Rn Eefx Agmod The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph has only 4000 operating hours and remains in excellent working condition. Hence, it represents a very reliable choice for businesses requiring immediate production integration. It meas...

Condition: used, Manufacturer: Ima Farmomac Model: F370 18VL 8C Year: 1987 frame - Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Type : Monoblock bottle filling and crimping machine. Application: Glass and plastic syrup bottles with aluminium PP28 cap (Ø 28 mm-) Industrial sector: Pharmaceuticals and cosmetics Movement: continuous automatic Chedpfszg I Uysx Agmed Number of filling heads: 18 units Number of crimping heads: 8 units Volumetric pump: max. filling 1000 ml   Available sizes: 370 ml and 200 ml Capacity: 6000 vials/h in 370 ml Capacity: 7500 vials/h in 200 ml   NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow cabinet Vessel/buffer tank before filling. Vial infeed conveyor with paddles Control box and power cabinet. Protective covers with safety devices. Available history and documentation   These elements can be quoted separately. change of format, bottle sealing (screw caps, pressure caps, end caps, PFPs, etc.), etc.

Condition: used, Year of construction: 1996, operating hours: 26,000 h, machine/vehicle number: LC676, Used Tetra Pak TBA 19 200ML Slim Filling lineTechnical Specifications & Performance DataThis used bottling line is built around a Tetra Pak TBA 19 V10 filling machine for 200 ml Slim carton formats. Designed for dairy product processing, the line provides an integrated solution for filling, straw application, secondary packaging and product conveying in an industrial packaging environment.Filling machine: Tetra Pak TBA 19 V10Container format: 200 ml Slim Tetra Brik cartonProduct application: dairy productsYear of manufacture: approximately 1996Running hours: approximately 26,000 hoursConveyor system: approximately 30 meters, including 4 x 90° curves and 2 x chain tensionersAdvanced Automation & Control SystemsThe line combines dedicated filling and packaging equipment into a coordinated production arrangement. Its conveyor system supports the controlled transfer of individual cartons between the filling, straw application and packaging stages. Chain tensioners are included to help maintain reliable conveyor operation and product flow through the line.Machines of this type are typically operated through the individual controls of the filler and downstream packaging modules, allowing operators to manage the principal filling and handling stages from the relevant equipment stations.Production Line Integration CapabilitiesThis complete carton bottling line is configured for the 200 ml Slim format and includes filling, straw application, tray packing, tray shrink wrapping and conveying equipment. It is suitable for integration into dairy beverage production operations requiring a compact line layout for Tetra Brik cartons.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 19 V101996Various Equipment - Straw ApplicatorTetra Pak TSA 211996Various Equipment - ConveyorsTetra Pak1996Case PackerTetra Pak TCBP 70 Multiinfeed1996Shrink WrapperTetra Pak TTS 511996The Tetra Pak TCBP 70 Multiinfeed tray packer is compatible with, or can be configured as an option for, wrap-around packaging. The Tetra Pak TTS 51 tray shrink wrapper completes the secondary packaging process after tray packing.Machine Condition & Maintenance HistoryThe second hand bottling line has been workshop checked, fully tested and... Chsdpfx Agsz E Dgaomjd

Condition: used, Year of construction: 2011, machine/vehicle number: M327, Used GANGLOFF filling triblock 23000 BPHTechnical Specifications & Performance DataThis rotary Filling Monoblock CX 6/12 is engineered for high-efficiency beverage production and industrial packaging. Manufactured by Gangloff, it integrates precise filling with reliable capping to support demanding used bottling line and second hand equipment projects without compromising quality. Optimized for PET bottles and still water, the machine combines robust construction with a compact rotary footprint and neck-handling transfer for stable container control at high speeds.Manufacturer: GangloffModel: CX 6/12Year of manufacture: 2011Production speed: up to 23000 bottles/hourFiller configuration: 54 valvesCapper configuration: 13 heads (Zalkin)Current bottle format: 1.5LCompatible container material: PETNeck finish: 29/25Transfer type: Neck-handlingMachine type: RotaryWork direction: CounterclockwiseMaximum bottle height: 340 mmOperating pressure: 6 barControl platform: Schneider PLC and HMIAdvanced Automation & Control SystemsThe monoblock is equipped with Schneider PLC and HMI for stable, intuitive operation and simplified diagnostics. Automated sequences manage filling and capping synchronization, while recipe-based adjustments support quick format transitions. The neck-handling architecture reduces mechanical adjustments when switching bottle heights, enhancing uptime and repeatability. Operator interfaces provide clear status visualization and alarms to maintain consistent beverage production quality.Production Line Integration CapabilitiesDesigned for seamless integration in a complete bottling line, the machine can operate inline with upstream rinsing machines and downstream labeling, inspection, and packaging machinery. The neck-handling conveyor interface ensures gentle container transfer, minimizing scuffs and misalignment. Format flexibility centers on PET bottles with 29/25 necks, with the current setup optimized for 1.5L water. The rotary monoblock layout conserves floor space while delivering continuous, stable throughput for industrial packaging applications.Machine Condition & Maintenance HistoryThe unit is ready for operation and has been overhauled. It is supplied with compatible spare parts and includes a 6-month guarantee. Its current configuration supports immediate deployment in beverage production environments, particularly for still water in PET bottles. The maintained condition and recent service provide a reliable starting point for second hand line upgrades or capacity expansions.Operational Performance & VersatilityThis monoblock is ideal for Water production in PET containers. The 54-valve filler delivers uniform fills at high speeds, while the 13-head Zalkin capper ensures precise torque application and consistent sealing for 29/25 neck finishes. Neck-handling transfer enhances stability across tall form... Cedps Adt Nbofx Agmshd

Condition: used, Year of construction: 2000, machine/vehicle number: LC348, Used Filling Line For Edible Oil In PET 1L Bottles Capacity: 6.000 bph x 1,0 L Blow Molding Machine KOSME KSB 3000 – 2001. – 2 pcs x 3.900 bph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. – 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filling Monoblock Filler and capper – ICS-Slovenia – 1995 – 6.000 L/h Labelling Machine Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Chjdpfx Ajyhbzdogmod Packer in transport boxes 3×5 bottles – ICS – 1995 Shrink Wrapper Shrink wrapper SMIPACK-packer in foil 2×5 bottles – 2013 Pallet Wrapper Pallet wrapper ZLATOROG-Slovenia – 1999 Compressor KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth It has complete technical documentation Required space for equipment: 600 m2 Required installed power (equipment, compressors, refrigerators): 495 kW The Used Filling Line For Edible Oil In PET can be seen in full production function until December 15, 2022

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1639 4186, type of input current: three-phase, input voltage: 230 V, total width: 1,500 mm, total length: 2,700 mm, total height: 1,900 mm, overall weight: 900 kg, Equipment: compressed air system, documentation/manual, For Sale: Flexicon FMB210 Filling & Capping Machine with BU12 Bottle Unscrambler – 2017 Manufacturer: Flexicon / Watson-Marlow Model: FMB210 + BU12 Year of Purchase: 2017 Condition: Fully operational Bottles Produced: 3.4 million Application: 10ML and 30ML E-liquid production (subject to modification). Machines sold by Flexicon are typically designed for the pharmaceutical industry. - Equipment Overview A well-maintained Flexicon FMB210 automatic filling and capping machine, supplied with a BU12 bottle unscrambler, previously used for e-liquid production. It could benefit from servicing and a new capping motor. Purchased in 2017, the equipment has seen relatively limited use and remains fully functional. The machine is offered with two format change parts (10ML and 30ML) and complete documentation, making it an attractive opportunity for manufacturers looking for a proven filling and capping solution. - Key Features • Flexicon FMB210 automatic filling and capping machine • BU12 bottle unscrambler included • Previously used in e-liquid manufacturing • Fully operational at the time of sale • Multiple format change parts included Chsdsz Szupepfx Agmjd • Complete documentation available • Suitable for evaluation for e-liquid, liquid filling, and other compatible production applications • Price in 2017: 2,618,000 DKK (€351,000) - Condition & Availability The equipment is available for inspection by appointment. Further technical information, photographs, videos, and details of the included format parts can be provided upon request. The video in the advertisement shows a similar machine. Location: Aalborg, Denmark

Condition: excellent (used), TETRA PAK A3 FLEX 1000 B ASEPTIC FILLING MACHINE – 500 ML FORMAT Industrial aseptic filling machine, TETRA PAK A3 FLEX 1000 B, configured for the automatic packaging of liquid food products in 500 ml multilayer cardboard Tetra Brik Aseptic containers. The machine uses aseptic forming, filling, and sealing technology, integrating the sterilization of the packaging material, the formation of the brick, the dispensing of the product, and its hermetic sealing into a single machine. Tetra Pak A3 Flex technology is designed for the industrial packaging of previously sterilized products, allowing for the production of long-life beverages without the need for refrigeration before opening, provided that the required processing and sterility conditions are met. MAIN FEATURES - Manufacturer: TETRA PAK Cjdpfx Asz Rzidjgmehd - Model: A3 FLEX - Version: 1000 B - Filling format: 500 ml - Type: Automatic aseptic brick filling machine - Packaging: Tetra Brik Aseptic - Automatic forming, filling, and sealing system - Continuous feed of packaging material via reel - Sterilization of packaging material - Formation of multilayer cardboard packaging - Filling of previously sterilized product - Longitudinal and transverse sealing system - Automatic cutting and forming of packaging - Control of aseptic conditions during the process - Automatic transport and discharge of packaging - Tetra Pak electronic control panel - Operating parameter monitoring system - Upper platform for access and maintenance - Industrial construction with stainless steel components - Integrable into complete aseptic packaging lines OPERATING PROCESS The multilayer packaging material is fed into the TETRA PAK A3 FLEX from a reel and passes through the sterilization system before being formed. Subsequently, the material is transformed into a continuous tube through longitudinal sealing. The product, previously treated using a compatible UHT system, is introduced inside under aseptic conditions. The machine performs the transverse sealing, cutting, and forming of the individual packages, producing hermetically sealed bricks ready for the next production stages. The finished packages can be transferred to inspection, coding, capping, grouping, case packing, and palletizing systems. APPLICATIONS Particularly suitable for dairy industries, juice, nectar, plant-based beverage, and other long-life liquid product manufacturers. Depending on the installed configuration, it can be used for: - UHT milk - Flavored milk - Dairy smoothies - Fruit juices - Nectars - Plant-based beverages (soy, oat, or rice) - Nutritional beverages - Other liquid beverages compatible with aseptic packaging The TETRA PAK A3 FLEX 1000 B constitutes an industrial solution for automating the aseptic packaging of beverages, combining packaging formation, filling, and sealing in a single machine. The exact formats, production capacity, and compatibility with different products will depend on the installed configuration and tooling. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2014, machine/vehicle number: M298, Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Filling section The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Chedpfxsw Ag Ndj Agmod Capping section The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance.

Condition: excellent (used), COALZA R90-MP1 AUTOMATIC BAG FORMING AND FILLING MACHINE – STAINLESS STEEL COALZA R90-MP1 automatic bag forming and filling machine, designed to perform the bag forming, dosing, filling, and sealing operations of flexible packaging on industrial food packaging lines. The equipment uses vertical VFFS (Vertical Form Fill Seal) packaging technology, forming bags from rolls of flexible film and automatically filling and sealing them. It incorporates a vertical forming tube, a film feeding system, sealing jaws, electronic controls, and transparent safety enclosures. MAIN FEATURES - Manufacturer: COALZA - Model: R90-MP1 - Type: Vertical forming, filling, and sealing machine - Technology: VFFS - Automatic and continuous operation - Bag forming from a roll - Top product feeding system - Vertical forming tube - Automatic film feeding - Longitudinal and transverse sealing - Automatic bag cutting and separation - Dosing via a compatible system - Sealing parameter adjustment - Electronic HMI control panel - Temperature controllers - Electric and pneumatic drives - Construction with stainless steel components - Transparent safety guards - Integrable with weighing and dosing systems OPERATING PROCESS The film is fed from a roll and passes through the forming tube, where it acquires the bag geometry through longitudinal sealing. The product is introduced through the top feeding system, previously dosed by the corresponding equipment. Subsequently, the jaws perform the transverse sealing and cutting, resulting in individual closed bags. The finished packages can continue to weight checkers, metal detectors, inspection systems, and cartoning equipment. APPLICATIONS Chjdpfx Ajz R S Nisgmjd Especially suitable for food industries, manufacturers of snacks, frozen foods, nuts, and granular products. Depending on the dosing system installed, it can be used for: - Nuts and seeds - Snacks and appetizers - Legumes, rice, and cereals - IQF frozen vegetables - Diced fruits and vegetables - Dehydrated products - Other compatible solid products The COALZA R90-MP1 offers a compact solution for automating the vertical packaging of food products in flexible bags. Formats, compatible materials, and production capacity will depend on the installed configuration. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2021, Overview This compact canning line combines a Wild Goose Quick Change Gosling semi-automatic can filler, a Zomerdijk TWIST can rinser and a Crafted Goose EME automatic labeller (type JE-1100/185-S2) with a Cyklop CM220 thermal inkjet printer. Built in 2021 (filler and labeller), the line runs at up to 600 cans/hour and is compatible with 0.33 L, 0.44 L and 0.5 L can formats (currently tooled for 0.44 L cans). The filler is mounted on a wheeled base frame and includes DO buster and CO₂ regulation equipment as well as low- and high-flow foam control for beers above 4.2 g CO₂/L. The filler's production counter reads approx. 35,000 fill cycles - light craft-scale use. The line is still installed and under power, and can be viewed on request. Technical data - Line type: Small canning line (filler + rinser + labeller) - Capacity: 600 cans/hour - Can formats: 0.33 L / 0.44 L / 0.5 L (currently tooled for 0.44 L) - Filler type: Semi-automatic - Filler electrical supply: 230 V single-phase, 50/60 Hz, 8 A - Foam control: low- and high-flow, for beer >4.2 g CO₂/L - Labeller: EME type JE-1100/185-S2, automatic, with Cyklop CM220 thermal inkjet printer - Recorded use: approx. 35,000 fill cycles (production counter) - Year of manufacture: 2021 (filler and labeller) Scope of Delivery - Can Filler | Wild Goose | Quick Change Gosling | Semi-automatic; wheeled base frame; DO buster and CO₂ regulation; low- and high-flow foam control; tools and basic spare parts kit; format kits for 0.33/0.44/0.50 L cans | 2021 - Can Rinser | Zomerdijk Engineering | TWIST | Infeed buffer on stand, 2 rinse cages, post-rinse collection table; for 0.33/0.44/0.50 L cans - Labeller + Printer | EME (Crafted Goose) | JE-1100/185-S2 | Automatic label application; Cyklop CM220 thermal inkjet coder | 2021 Condition Used - light craft-scale use; still installed and under power at the seller's site. The line can be visited and demonstrated on request. Availability Codpfx Ajzk U Eysgmohd Available now. Location: Spain.

Condition: used, Year of construction: 2017, machine/vehicle number: LC677, Used Wild GoosePak canning line - Year 2017Technical Specifications & Performance DataThis used bottling line is a 2017 Wild Goose 4-head canning line configured for industrial packaging and beverage production in standard LOE aluminum cans. The line is identified as WGC-250 and includes Wild Goose M-250 equipment together with a Wild Goose Paralleltrain unit. It is configured for three established can formats, allowing operators to run multiple retail pack sizes within the same second hand canning system.Manufacturer: Wild GooseLine model: WGC-250Year: 2017Configuration: 4-head canning lineCan formats: 0.355L, 0.473L and 0.568L standard LOE cansElectrical supply: 110 VAdvanced Automation & Control SystemsThe line is described as functional and is arranged as an integrated can handling and filling solution. The supplied information does not identify a PLC type, while the 110 V electrical requirement should be considered during commissioning and site electrical planning. The equipment is supported by available manuals and spare parts, helping maintenance teams prepare routine service procedures and operational changeovers.Safety guards are not included. A buyer should evaluate the safeguarding arrangement, operator access points, interlocks and emergency-stop integration as part of installation planning and before production use.Production Line Integration CapabilitiesThis Wild Goose canning line combines depalletizing, can turning or rinsing and 4-head canning functions in a compact process arrangement. Empty aluminum cans are supplied from the depalletizer, pass through the twist rinser section and continue to the M-250 canning equipment. The configuration is suitable for integration with upstream product preparation and downstream coding, secondary packaging, palletizing and conveying equipment according to the required beverage production layout.Machine type/categoryManufacturer/modelYearDepalletizerWild Goose2017Can Twist ConveyorWild Goose Paralleltrain2017Filling MonoblockWild Goose M-2502017Machine Condition & Maintenance HistoryThe equipment is stated to be functional, supporting its use as a used bottling line for buyers seeking a ready-for-operation canning solution. Manuals are available and spare parts are available. Maintenance records are not supplied, so standard pre-installation inspection, cleaning, functional testing and service planning remain important steps for a smooth handover into production.Operational Performance & Versat... Cjdpfx Agez E Df Aemohd

Condition: excellent (used), ANGELUS 120L AUTOMATIC CAN SEALER The ANGELUS 120L automatic can seamer is designed to hermetically seal metal containers using a double seaming process on industrial production and packaging lines for food products. The equipment incorporates a rotary seaming system that allows for continuous operation, synchronizing the feeding of cans and lids with the mechanical seaming operations. ANGELUS technology is widely used in the canning industry due to its robustness, mechanical precision, and ability to produce uniform seals in continuous industrial production processes. MAIN FEATURES - Manufacturer: ANGELUS - Model: 120L - Type: Automatic can seamer - Application: Sealing of metal containers - Rotary seaming system - Automatic and continuous operation Codsz R S Hbjpfx Agmjhd - Automatic can feeding - Lid feeding and positioning system - Mechanical sealing by double seaming - First and second seaming pass operations - Synchronized container transfer - Drive system with electric motor - Mechanical seaming assembly with heads and rollers - Adjustment and adaptation to formats according to installed tooling - Robust industrial structure - Safety guards on moving parts - Accessibility for inspection and maintenance - Integrable into complete filling and sealing lines for canned goods OPERATING PROCESS Pre-filled cans are automatically fed into the ANGELUS 120L seamer, where they are positioned for the sealing operation. The system feeds and places the lids onto the containers, which are then conveyed to the rotary seaming mechanism. During the first seaming operation, the edge of the lid and the flange of the can body are mechanically folded to form the initial joint. In the second operation, the rollers compress and complete the formation of the double seam, creating a hermetic mechanical bond between the lid and the container body. Once sealed, the cans are automatically discharged and can continue to washers, inspection systems, autoclaves, pasteurizers, coolers, labelers, and end-of-line equipment. APPLICATIONS Especially suitable for canning industries processing fish, seafood, meat, vegetables, legumes, and prepared dishes, as well as other manufacturers of canned foods. It can be integrated with: - Automatic fillers and dosing machines - Lid feeding systems - Liquid topping dosing equipment - Vacuum systems, depending on line configuration - Can washers - Sterilization autoclaves - Seam inspection systems - Labeling and case packing lines The ANGELUS 120L provides an industrial solution for automating can sealing, offering a continuous and repetitive mechanical process. The compatible formats, production speed, and exact sealing characteristics will depend on the installed tooling and configuration. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2014, machine/vehicle number: LC675, Used CSAK brewing canning line 2500 cans-hourTechnical Specifications & Performance DataThis complete canning line is a used, fully reconditioned industrial packaging system designed for beer production in standard 330 ml cans. Built around an atmospheric filling process, the line provides a coordinated solution for empty-can handling, filling, labeling and date or lot coding.Production capacity: 2500 cans/hCan format: 0.33L standard cansFilling method: Atmospheric filling, not counter-pressure fillingFiller manufacturer: Cask Brewing SystemsYear: 2014Advanced Automation & Control SystemsThe line includes guarded conveyor-based equipment with integrated operator controls. Visible features include touchscreen control interfaces, status-light towers, pushbutton controls and emergency-stop devices. Pneumatic lines, valves and adjustable conveyor guide components support controlled handling through the packaging process.Production Line Integration CapabilitiesThis complete canning line combines essential process stages for beer canning, from depalletizing empty cans through atmospheric filling, labeling and coding. It can be integrated with upstream beer-processing equipment and downstream secondary packaging machinery through suitable conveying and line-control arrangements.Machine typeManufacturer / modelYearDepalletizerCan depalletizer/elevatorFilling MonoblockCask Brewing Systems atmospheric filler2014Labeling MachineS2S Labelling Machines S2/ZPrinterLinx inkjet coderThe 0.33L can format makes this equipment suitable for producers requiring a compact beverage production solution for standard beer cans. The modular arrangement also supports practical connection to can conveyors, accumulation sections and downstream industrial packaging operations.Machine Condition & Maintenance HistoryThe line is used and fully reconditioned, providing a prepared second hand canning solution for operation. Its reconditioned condition is particularly relevant for buyers seeking established beverage production equipment with the core filling, labeling and coding functions supplied as one line.Operational Performance & VersatilityThe atmospheric filler is intended for beer in cans and is specifically identified as a non-counter-pressure filling system. The line incorporates an empty-can depalletizer/elevator, a Cask Brewing Systems filler, a Linx inkjet coder and an S2S Labelling... Chjdsz E Dhkepfx Agmod

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Electricity: Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Chedszdy Iaepfx Agmsd Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2000, machine/vehicle number: M309, Used filling monoblock Bertolaso Syncronia 16-16/1-840Technical Specifications & Performance DataThe Bertolaso Filling Monoblock Syncronia 16-16-1-840 is a second hand bottling monoblock designed for high-quality beverage production on glass bottles. This used bottling line component integrates rinsing, filling, and corking in a compact rotary platform engineered for reliable industrial packaging performance. Manufactured by Bertolaso, the machine features an inert gas management concept for both bottle conditioning and closure, making it an excellent choice for premium products requiring oxygen reduction.Manufacturer: BertolasoModel: Syncronia 16-16-1-840Year: 2000Container type: Glass bottlesRinser: 16 grippers with penetrating nozzle and double inert gas treatmentFiller type: Gravity/light depression with nitrogen supportCorker: Single-head straight corking with inert gas and vacuum corkingFormats: Compatible with 0.375L and 0.75L bottle formatsElectrical: 400 V, 50 HzCIP readiness: Integrated CIP with stainless steel dummy bottlesModel code & configuration: Syncronia 16-16-1-840Advanced Automation & Control SystemsThe monoblock includes process features aimed at consistent quality and reduced oxygen pickup. The rinser employs double inert gas treatment to pre-condition the bottles. The filler operates in light vacuum/gravity mode with nitrogen, complemented by level control at the valve. A sensor detects hanging bottles at the outfeed to protect product flow and minimize stoppages. Integrated CIP and stainless steel dummy bottles enable efficient cleaning-in-place procedures across rinsing and filling turrets, supporting hygienic operation in beverage production.Production Line Integration CapabilitiesDesigned for industrial packaging environments, this monoblock can operate as a standalone unit or be integrated into a complete used bottling line. It is optimized for glass bottle handling and can interface with upstream conveyors and downstream inspection or labeling systems. Format flexibility includes 0.375L and 0.75L sizes, and quick changeover is supported by the turret design and format parts.Machine Condition & Maintenance HistoryThe machine is in excellent overall condition and has processed approximately 1,000,000 bottles over its lifetime. Its condition and integrated CIP system suggest careful operation and maintenance, making it suitable for facilities seeking ready-for-operation bottling equipment with proven reliability.Operational Performance & VersatilityThis monoblock is particularly suited to oxygen-sensitive products handled in glass bottles. The double inert gas rinsing, nitrogen-assisted filling under light depression, and vacuum corking with inert gas injection collectively provide robust oxygen management. The machine’s engineering by Bertolaso is recognized for precision filling, gentle handling, and closure integrity with straight corks. Additional safeguards include outfeed sensors for bottle position control and level r... Chedpfx Agjz E Dlpjmod

Condition: used, Year of construction: 2018, Overview Cjdpsy Tt H Dsfx Agmshd This compact automated can filling line was manufactured with main equipment from KHS, Ferrum, Ska Fabricating and Atlanta. The line is designed for beverage can production and includes depalletizing, can transport, ionized air rinsing, filling, seaming and downstream film / shrink packaging. The core of the line consists of a KHS Innofill Can C filling system combined with a Ferrum FC03 can seamer. The system is integrated with overhead and floor-mounted can conveyors and is arranged in a compact production layout. Technical Data - Manufacturer / main equipment: KHS / Ferrum / Ska Fabricating / Atlanta - Line type: Automated can filling line - capacity: 15.000/h - Number of filling valves: 21 - Number of seaming heads: 3 - Container type: 330ml, 440ml, 500ml standard can - Packaging type: loose cans into 12 & 24 trays and WA boxes - Year: 2018 - Operating hours: 3,446 h - Layout: compact canning line layout with overhead and floor-mounted conveyor sections Scope of Delivery - Can Depalletizer | Ska Fabricating Co. | – | Enclosed depalletizing system with safety guarding | 2018 - Can Conveyor System | KHS / AE | – | Overhead and floor-mounted conveyor network for empty cans and line transfer | 2018 - Ionized Air Rinser | Ska Fabricating Co. | AV-C500 | Empty can rinsing / cleaning module before filling | 2018 - Can Filler | KHS | Innofill Can C | Automated can filling system | 2018 - Fill level detection | Heuft | - - Can Seamer | Ferrum | FC03 | Rotary can seaming unit | 2018 - Can dryer | Air control industries | 2018 - Labeller | Pack Leader Advanced Dynamics | Pro-516 | Labelling machine incl. roller feed | 2018 - Case Packer | Atlanta | Rafaello 726 | packaging system | 2018 - Case Packer Printer | SATO | S86-EX | 2018

Condition: used, Year of construction: 2016, Overview  This compact filling line for cans and bottles consists of equipment from Wildgoose, Slowbeer, Enos Euro and Millipore and is designed for craft beverage production with flexible batch sizes. The line combines isobaric and atmospheric filling technologies and includes semi-automatic and manual machines for filling, capping, labeling, and product filtration. The core component is a Wildgoose WG1-CE filler (2021), capable of handling both cans and bottles with integrated seaming functionality. With its modular setup, the line is particularly suitable for small to medium-scale producers, pilot production, or specialty beverages such as craft beer, kombucha, cider, or soft drinks. Technical Data  - Capacity: - Up to 24 units per minute (atmospheric – Wildgoose) - Up to 16 units per minute (isobaric – Wildgoose) - Additional manual / semi-automatic filling capacity depending on configuration - Formats: - 20 cl – 1.5 L (depending on machine) - Container types: - Cans and glass bottles - Application: - Beer - Craft beverages - Kombucha - Cider - Soft drinks Cjdpfsyxr Anox Agmshd - Filling technologies: - Isobaric filling (carbonated products) - Atmospheric filling - Manual filling - Filtration: - 3-stage microfiltration system (Millipore) - Configuration: - Modular / semi-automatic line - Condition: used, good condition Scope of Delivery - Can / Bottle Filler | Wildgoose | WG1-CE | Isobaric and atmospheric filling with integrated seaming; 16 cpm (isobaric) / 24 cpm (atmospheric); formats 33 cl / 50 cl | 2021 - Manual Bottling Machine | SCH | SCHPK6 | 6-spout manual filler; approx. 250 bottles/hour; formats 20 cl – 1.5 L | 2016 - Bottling Machine | Slowbeer | RI4 | 4-spout filler; approx. 350 bottles/hour; formats 22 cl – 1.5 L | 2012 - Labeling Machine | Enos Euro | Base | Semi-automatic labeler; approx. 28–30 units/min; formats 22 cl – 1.5 L | 2017 - Crown Capper (2x) | Slowbeer | Tap Air Corona | Pneumatic crown cappers; crown sizes 26 / 29 mm | 2012 - Microfiltration System | Millipore | 3-stage | Stainless steel construction; 3-stage filtration system | 2016 Additional Information - Seaming unit is integrated in the Wildgoose WG1-CE filler - The line allows flexible switching between can and bottle filling - Ideal for craft production with frequent product or format changes - Compact footprint and modular design  

Condition: used, Year of construction: 2005, machine/vehicle number: LC671, Used Tetra Pak A3 flex 100V 330 prisma filling lineTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak aseptic carton filling and packaging solution configured for 330 ml Prisma cartons. The central filling machine is a Tetra Pak A3 FLEX 100V, built in 2005, designed for Brik carton handling with a pull-tab configuration. The line also includes a new Cap 30 FLEX cap applicator, built in 2026, configured for 330 ml Prisma cartons with Dream Cap closures.Filling machine: Tetra Pak A3 FLEX 100VFiller year: 2005Carton format: 330 ml PrismaCarton type: Brik cartonClosure configurations: pull tab and Dream CapCap applicator: Cap 30 FLEX, built in 2026OPTIONAL: Accumulator ACHX30 - 2010, 14713HAdvanced Automation & Control SystemsThe equipment features an integrated operator HMI/control panel, electrical control cabinet, pneumatic service components, mechanical drives and adjustable machine mechanisms. The filling and cap-application stations are intended to operate as coordinated industrial packaging equipment, supporting controlled handling of carton material, carton formation, filling, closing and downstream transfer. Operator access areas include service platforms, stairs and access panels for operation and maintenance activities.Production Line Integration CapabilitiesThis complete aseptic carton line is arranged around the filling machine and cap application process for 330 ml Prisma Brik cartons. It can be integrated with product preparation, upstream aseptic processing and downstream industrial packaging machinery according to the intended beverage production layout. An optional accumulator is available to provide carton buffering between line sections and help maintain production continuity during downstream interruptions.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3 FLEX 100V2005Capping MachineCap 30 FLEX2026Accumulation SystemACHX302010Machine Condition & Maintenance HistoryThe line includes a used Tetra Pak A3 FLEX 100V filler built in 2005 and a new Cap 30 FLEX cap applicator built in 2026. The optional used ACHX30 accumulator was built in 2010 and records 14,713.8 running hours. The stainless-steel enclosure, service platform, access ladder, pneumatic tubing, conveyor or product-transfer sections and machine adjustment components are visible on the equipment.Operational Performance & VersatilityThe Tetra Pak aseptic carton filling system is configured specific... Codpfx Agjzw Dvnjmehd

Condition: used, Year of construction: 2004, machine/vehicle number: M284, Used filling monoblock OCIM for oil tins 1000 bph The used OCIM filling monoblock for oil tins 1000 bph efficiently bottles oil in metal containers. Notably, OCIM manufactured this plant in 2004, ensuring high operational reliability with its robust mechanical structure. Moreover, its optimized filling system delivers precision and continuity in the production process. Technical specifications of teh Filling monoblock OCIM for oil Tins The OCIM monoblock model 8.5 fills 1000 tins par hour, thus maintaining efficient and stable production. Additionally, the system applies a gravity or light vacuum filling method, effectively handling viscous liquids such as oil. Furthermore, 8 fixed valves distribute uniform doses into each container. The machine processes different oil tin formats, specifically: 1-liter oval-shaped tin 3- and 5-liter rectangular tins Consequently, with its adaptable configuration, the OCIM monoblock quickly adjusts to various formats, thereby enhancing production line efficiency. Capping system and safety features For sealing containers, the monoblock utilizes a system with 1 capping head, specifically designed for pull-out spout caps. In particular, the machine supports a 38.5 mm cap diameter, a standard in the edible oil bottling industry. Additionally, the machine incorporates safety devices that protect operators and ensure compliance with industrial regulations. As a result, these systems reduce operational errors and maintain reliable long-term performance. Current state and operational configuration of the Filling monoblock OCIM for oil Tins Currently, the used OCIM filling monoblock for oil tins 1000 bph operates continuously in production, meaning it functions without significant interruptions. Furthermore, the system’s clockwise rotation integrates smoothly into existing lines without requiring complex mechanical adaptations. Given these advantages, this machine provides an optimal solution for companies seeking a reliable, precise, and high-performance bottling plant for oil in metal containers. Moreover, with its modular design and compatibility with various formats, the OCIM monoblock maximizes production efficiency and minimizes machine downtime, which are crucial factors in the industrial bottling sector. Consequently, businesses can ensure continuous and cost-effective operations. Similarly, its adaptability makes it a viable choice for various production demands. In conclusion, this monoblock stands out as a dependable asset in the bottling industry. Chsdpfx Ago Adt T Tomed

Condition: excellent (used), Automatic filling system Logdos Späth GmbH Type K-DOS.F/AL 40/EX for filling liquids into buckets, jerricans, IBCs and drums ATEX-protected mobile, can be moved on rollers Cedpfx Agoiyytqjmehd compact dimensions: 3m x 2m x 2m (L x W x H) Programmable X/Y axis and palletizing Very good condition, directly from production!!!

Condition: used, Year of construction: 2005, machine/vehicle number: M272, Used Filling Monoblock GAI 2405 1500 bph pre-owned monoblock filler / used bottle filling triblockThis Monoblock offers, therefore, a highly specialized solution for bottling still wine in glass containers, designed to meet the needs of technical precision and production continuity for industry operators. GAI manufactured this machine in 2005, and it achieves a filling speed of 1500 bottles per hour, which ensures, in turn, high efficiency for medium-capacity production lines. As a monoblock filling machine (often searched as a used bottle filling triblock integrating rinser, filler, and capper), this pre-owned solution is ideal for wineries seeking a compact, reliable monoblock filler within a single frame.Filling Specifications of the Used filling monoblock GAI The filling system of the GAI 2405 monoblock, meanwhile, delivers high precision in handling the product, maintaining consistent operating conditions. This model, in particular, uses 12 gravity or light depression filling valves, which effectively prevent turbulence or alteration of the still wine during processing. The filling valves, consequently, stay in a fixed position, reducing the risk of contamination or leaks. As a gravity/light-depression system, it is not an isobaric configuration, making it well-suited to still products while remaining compatible with ancillary options such as a nitrogenator upstream or downstream if the line owner wishes to manage dissolved oxygen more tightly. These traits make it highly competitive among monoblock filling machines for still beverages.Rinsing Section The Used Filling Monoblock GAI 2405 1500 bph rinsing system includes 12 grippers that perform a cleaning treatment for each bottle. The system, thus, completes rinsing in a single phase, which removes any residual particles inside the containers before filling. This single-treatment configuration, additionally, optimizes processing time and improves overall speed without compromising quality. In the context of a compact used bottle filling triblock, this integrated rinser enhances hygiene while maintaining a streamlined footprint.Capping Features The capping section of this model of Used filling monoblock GAI supports straight corks and includes one head for cork insertion, which enables the production of still wine in formats of 0.75 L, 1.0 L, and 1.5 L. This head is specifically designed to drive the corks into a flush-fitting position. This feature of operating with straight corks, as a result, ensures adherence to the traditional characteristics of the final product and, in turn, meets specific market demands. Within a monoblock filling machine architecture, this single-head corker provides dependable, repeatable cork application aligned with premium still-wine presentation.Design and Structure The Monoblock features a design that ensures long operational life and easy maintenance. Operators can access each component for cleaning and inspection, allowing for safe and efficient management of the machine. Moreover, the integration of rinsing, filling, and capping sections into a single unit reduces the machine’s footprint, which, therefore, optimizes space in the facility. The turret rotation is clock... Chedo Adywrspfx Agmed

Condition: used, Year of construction: 1995, operating hours: 26,000 h, machine/vehicle number: LC668, Used Tetra Pak TBA 8 V100 1000ml slim, helicap 23 filling lineTechnical Specifications & Performance DataThis second hand Tetra Pak complete aseptic carton filling line is configured for dairy production in slim 1.0L Brik carton packages. The core of the line is a Tetra Pak TBA 8 V100 filling machine, manufactured approximately in 1995 and showing approximately 26,000 working hours. A total refurbishment was completed in 2026, followed by a test run and inspection.Main filling machine: Tetra Pak TBA 8 V100Package format: Slim 1.0L aseptic carton packageSpeed: 6.000 TP/hProduct application: Dairy productionYear of manufacture: approximately 1995Working hours: approximately 26,000 hRefurbishment: total refurbishment in 2026Advanced Automation & Control SystemsThe line is supplied as an integrated industrial packaging solution comprising filling, cap application, conveyor handling and wrap-around tray packing equipment. The Tetra Pak TCAP 45/47 cap applicator has been modified for HeliCap 23 and is designed to handle screw caps with pre-punched paper packaging material. The standard-layout conveyor installation provides product transfer between the listed process stages.Machines of this type are intended to operate as coordinated packaging machinery, enabling continuous movement of filled carton packs from the filler through closure application and secondary packaging. Final operational setup should account for the selected carton material, cap components, product process interface and required line controls.Production Line Integration CapabilitiesThis used bottling line is arranged for aseptic Brik carton handling rather than conventional PET or glass bottle processing. It combines a Tetra Pak filling machine with a dedicated screw-cap applicator, approximately 30 meters of conveyors and a tray packer for wrap-around trays. The equipment is suited to integration within a dairy beverage production and industrial packaging environment.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 8 V1001995Capping MachineTetra Pak TCAP 45/47ConveyorsConveyorsWrap Around PackerTetra Pak TCBP 70The line can form a practical filling and end-of-line packaging section where cartons are filled, closed, conveyed and packed into wrap-around trays. Upstream dairy processing, hygienic product supply and downstream pallet handling can be matched ... Codpfxozwu Uno Agmjhd

Condition: used, Year of construction: 2002, The Fogg Monoblock Filler is a type of packaging machine designed for filling and capping bottles, typically used in industries like beverages, pharmaceuticals, and cosmetics. Here’s a brief description: Features: - Monoblock Design: Combines filling and capping processes in a single machine, enhancing efficiency and reducing the footprint on the production line. - Suitable for 38mm Caps: Specifically designed to accommodate 38mm diameter caps, which are commonly used in various bottle types. - Filling Mechanism: Utilizes a volumetric or gravimetric filling system to ensure accurate liquid filling, essential for maintaining product integrity and compliance with regulatory standards. - Speed and Efficiency: Capable of high-speed filling and capping, improving overall production throughput. - Versatile: Can handle various liquid types, from water to thicker, more viscous products depending on configuration. Applications: - Commonly used in the beverage industry for filling soft drinks, juices, and other liquids. - Suitable for pharmaceutical products requiring strict filling standards. - Used in cosmetics for lotions, shampoos, and other liquid products. Benefits: - Streamlined production process reduces handling and transfer times. - Improved accuracy in filling minimizes spillage and product waste. - Enhanced product shelf life due to airtight sealing. Dawson Debagger, which is suitable for 250ml bottles. We used to use the NAMPAK type (50mm x 50mm square), and 2 bags would fit width ways. A total of 6 bags could go on the bed at any one time, meaning a capacity of approximately 1500 bottles. We added a special air operated "gate" to the end where the dogchain is, which was for using PET bottles. As the PET bottles were smooth, they tended to stick together - so the function of the gate was to separate the row of bottles that was about to be swept by the dogchain from the rest of the bottles on the bed,. It worked very well, so we also used it for the HDPE bottles. The overall length is around 4.5m, and the width of the bed is I think 1200mm, with the widest part of the machine at about 1.8m. It runs on single Cedpfx Agoz Ht Icemehd phase power (16a, blue plug or hard wired) and has a variable bed speed setting. Speed: 0-8000 b/hr Depending on Volume Type: Monoblock CIP: Ring for connection Cap Feeder: Included Automation: Authentic Fogg controls Filling Heads: 18 Capping Chucks: 5 Cap Type: 38 mm Bottle Type: square Labeller: Graham Labeller Debagging Table: Dawson Included Collection Table: Included Conveyors: 13 meters and bends Bottle Rinser: Included Available: Immediately