Used Sterilizer for sale (199)

Condition: excellent (used), Year of construction: 2001, TUBULAR JUICE UHT STERILIZER MADE BY KF ENGINEERING, GERMANY CAPACITY 11 TONS PER HOUR Cedpfx Ajv Tl D Nef Ashc FOR ALL JUICES, INCLUDING TOMATO MAX TEMP. 124 DEGR. C. PLC SIEMENS-7

Condition: used, Year of construction: 2005, The machine is dosing ClO2 into water to use it in a Rinser. Cedpfsz Icn Isx Af Aehc

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: Trans Smart 555, Fully automatic steam sterilizer. The unit features a range of pre-set programs for the most common sterilization processes used in hospital and general applications. Program cycles employ mechanical air extraction with a series of vacuum/pressure pulses to effectively remove air, ensuring proper sterilization. The chamber dimensions are adapted for sterilization, accommodating wire baskets according to ISO and STU or containers according to DIN. The unit has a capacity of up to 555 L. The temperature range is from 121°C to 135°C. Key Features Chamber and lining made of AISI 316L stainless steel. Chjdpsy Ipllofx Af Aec Automatic vertically sliding doors. Drying system. Process monitoring. Built-in printer.

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. Cedpfxjzwgxre Af Ashc • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh

Condition: used, This listing is for a MMM Stericell Hot Air Sterilizer. Good working and cosmetic condition. Chjdpexzg N Esfx Af Asc The STERICELL® hot air sterilizer is intended for use in healthcare for the hot air / dry heat sterilization process of non-packaged and packaged medical devices, including invasive devices designed by their manufacturers for hot air / dry heat sterilization.

Condition: excellent (used), Year of construction: 2010, Ultrafiltration plant for fermented products 3 Main items: 1) Thermization unit 2) Ultrafiltration (UF) for fermented milk 3) Cooler and Silo. The line is used to produce Quark/Skyr. The thermization and ultrafiltration unit are also suitable for producing other fermented and concentrated dairy products such as: Skyr, Mascarpone, and Double Cream cheese. Key data: - Input: 3,500 - 5,000 liters per hour of fermented skim milk, full-fat milk, or enriched products. - Concentration factor: 1.8-2.5 1) Thermization unit Complete skid-mounted thermization unit. Flow rate: 3,500 up to 5,000 liters (depending on the product). Manufacturer: Tetra Pak Temperature cycle: Input: 21-30 °C (incubation temperature) -> recuperation (permeate cooler) -> thermization at 55/60°C or pasteurization at 72/95 °C -> holding -> output to ultrafiltration at approx. 45 °C. Complete unit including: * Stainless steel frame in which everything is pre-assembled. * Closed balance tank with spray bowl. * Centrifugal product pump, stainless steel casing, flush seal, type: LKH. * Plate heat exchanger, 4 stages, new, Tetra Pak, Clip6-SR Model. * Control box with all connections for sensors and pneumatic valves. * Holding tube for 5,000 liters per hour, adjustable by connecting more or fewer tubes: 30 seconds up to 180 seconds in 9 stages. 2) Ultrafiltration unit Manufacturer: Tetra Pak Type: Tetra Alcross US P&F Serial number: T5845810096 Year: 2010 Capacity: Input up to 5,300 liters/hour Description: Concentrates yogurt or fermented milk to achieve the desired composition and texture. The UF separates the product into retentate and permeate. The retentate is the product, with proteins and fat (if included) concentrated. Cedpjz Imdasfx Af Ashc The advantage of this design of UF (compared to spiral-wound UF and separators) is that it is suitable for fermented products with and without fat. Also, all proteins are concentrated (even whey proteins). This results in high pressures in the system; filtration can only be achieved with a plate and frame filtration system with flat FR60pp filters and rotary piston circulation pumps. Some example products that can be made with this system: Input: skim milk 9% TS -> output approx. 16% TS (Skyr). Input: 20% TS including fat -> output: cream cheese or mascarpone. Input: pre-concentrated fermented skim milk up to 12% TS -> output up to 18% TS (Quark). The limiting factor is the permeate output. Approximate permeate per stage: Stage 1: 1100-1755 liters/hour, 13.5 m2 filters. Stage 2: 675/1170 liters/hour, 9 m2 filters. Stage 3: 320/585 liters/hour, 4.5 m2 filters. Stage 4: 300/585 liters/hour, 4.5 m2 filters, 15 bar. Filter: plate and frame type, manufacturer: Tetra Pak - DDS, model: M37 Complete unit including: * Stainless steel frame. * 2 balance tanks with spray bowl (feed and permeate return). * Feed pump Tetra LKH. * 4 circulation loops including circulation pumps. First stage with centrifugal pump, 3 stages with Waukesha 320-U2 rotary piston high-pressure pumps. Last stage up to 15 bar pressure for highly viscous products. 3) Quark silo, cooler, and pump. Manufacturer: Schwarte-Milfor Type: Quarksilo Serial number: 3580 Year: 2011 Capacity: 5,000 liters Description: Robust conical design for very viscous products. Insulated. Hermetic, ultra-clean with sterile air. Sensors for level and temperature. On inlet: - Plate cooler Manufacturer: Tetra Model: Clip line C6 Thermal cycle: 45 -> approx. 18°C

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: STERIVAP 6612, For sale is a BMT STERIVAP 6612 steam sterilizer from an active food production facility. The autoclave was originally designed for medical applications and is currently used successfully for sterilizing beverage bottles. Up to 350 bottles are processed per sterilization cycle on specially adapted transport trolleys. Cedpfx Aezccunef Ajhc The unit features integrated steam generation, a modern Siemens control system with a touchscreen, and programmable sterilization cycles with stored programs for temperatures above 121 °C. The system is in very good technical condition. The heating elements have been replaced, wear parts have been regularly exchanged, and all maintenance has been performed on an ongoing basis. The autoclave is currently in daily operation and can be inspected under production conditions until August 2026. Further details: Usable volume: 610 liters Pass-through design Integrated steam generation Siemens control system with color touchscreen Display currently set to Polish, other languages possible Programmable sterilization cycles Stored programs > 121 °C Heating elements replaced Regular maintenance Wear parts regularly replaced 1 transport trolley included Additional transport trolleys available Currently used in a food processing facility Inspection possible during operation Available from 01.09.2026 Location: 58-508 Siedlęcin, Poland Price: €20,900 (negotiable).

Year of construction: 2017, condition: as good as new (ex-display), functionality: fully functional, Pharmatec Syntegon SVP 250 LF – Formulation System for Sterile and Aseptic Liquid Pharmaceuticals For sale is a Pharmatec Syntegon SVP 250 LF formulation system for Small Volume Parenterals (SVP). The sale is on behalf of Syntegon (manufacturer, formerly Bosch Packaging/Pharmatec GmbH, Dresden). Technical Specifications: - Suitable for aqueous solutions, suspensions, and emulsions - Adaptable processing: terminal sterilization, sterile filtration, aseptic compounding - 2-vessel system for batch sizes of 25–250 L (expandable up to 4 vessels) - Dosing of additives via manway under LAF or pump system - Potent actives (OEB4/OEB5) processing via high-containment valve - CIP/SIP interfaces and pre-configured automation for integration with filling lines - GMP-compliant design, suitable for cleanroom classification Pricing: - Special price: please submit your offer Cjdjxdy Eropfx Af Ashc - Original price in 2018: approx. €1,050,000 - Current list price for similar systems in 2025/2026: €1,415,000 Completion Status & Delivery Time: - Currently, the system is not fully operational, as the automation system including software needs to be reinstalled and certain components require replacement. - Completion will be handled directly by the manufacturer Syntegon, in consultation – expected lead time is approx. 3–4 months. - For comparison: lead time for a new system is approx. 12 months. Special Features: - System was originally built for exhibition purposes (demonstration unit) - Sale is directly on behalf of Syntegon, the original manufacturer - Ideal for pharmaceutical companies seeking a flexible and high-performance SVP system with a manageable delivery time.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, Professional BELIMED MST-V 6-6-12 VS2 steam sterilizer from an ongoing food production facility for sale. The unit was originally developed for the medical field and is now successfully used for sterilizing beverage bottles in a smoothie production line. Up to 350 bottles are sterilized per cycle on specially adapted trolleys. The autoclave features a modern Siemens control system with a touchscreen, programmable sterilization cycles, and stored programs for sterilizations above 121°C. Programs are programmable, and the display language can be selected. Chjdpfx Aezccqiof Ajc Of particular note is a recent test report from an independent food institute, featuring FDA-compliant temperature penetration measurements within the product. The system is in very good technical condition. In recent years, the sterilization door, pumps, and motors have been replaced. The autoclave is currently in daily use and can be inspected under real production conditions until August 2026. Further details: * Pass-through design with a door at the front and rear * Siemens control system with a color touchscreen * Display currently set to Polish; other languages are possible * Programmable sterilization cycles * Stored programs > 121°C * FDA-compliant temperature penetration measurement available * Test report from an independent food institute available * New sterilization door * Pumps replaced * Motors replaced * Regularly maintained * 1 transport trolley included * Additional transport trolleys available * Currently in use in a food production facility * Inspection possible during ongoing operation Available from 01.09.2026 Location: 58-508 Siedlęcin, Poland Price: €29,900 (negotiable)

Condition: excellent (used), ROSSI & CATELLI OLIMPIC TC XX/ASD Aseptic Multitubular Sterilizer – Stainless Steel ROSSI & CATELLI OLIMPIC TC XX/ASD aseptic multitubular sterilizer, designed for the continuous thermal treatment of liquid, semi-liquid, and viscous food products in aseptic processing lines. The system uses tubular/multitubular heat exchange technology to heat and subsequently cool the product indirectly and in a controlled manner. It is designed for processes where sterilization conditions must be achieved before proceeding to storage or aseptic filling. Its extensive configuration of stainless steel tubular sections provides a large heat exchange surface area and allows the different phases of the process to be integrated into a single unit. MAIN FEATURES -Manufacturer: ROSSI & CATELLI -Series: OLIMPIC -Model: TC XX/ASD -Type: Aseptic multitubular sterilizer -Tubular/multitubular heat exchange technology Chodpfx Aszw E D Tjf Ajc -Continuous thermal treatment -Indirect product heating -Heating and cooling sections -Thermal holding tubes -Stainless steel construction -Multiple heat exchange modules -Sanitary connections -Self-supporting industrial structure -Designed for aseptic processes -Integrable into complete aseptic processing and filling lines PROCESS The ROSSI & CATELLI OLIMPIC TC XX/ASD is designed to continuously perform the different stages necessary for the thermal treatment of the product. The product circulates through the multitubular system, where it can pass through different phases of preheating, heating, sterilization, thermal holding, and cooling, depending on the configuration and parameters established for each process. Indirect exchange allows for controlled product temperature while keeping it separate from the heat transfer fluid. It can be integrated with: -Product preparation tanks -Sanitary pumps -Homogenizers -Deaerators -CIP systems -Aseptic tanks -Aseptic fillers -Complete UHT/aseptic processing lines APPLICATIONS Especially suitable for the juice, processed fruits and vegetables, tomato, sauces, purees, concentrates, and other liquid or viscous food products that require continuous thermal treatment. Depending on its configuration, it can be used for fruit juices, purees, and pulps, concentrates, tomato products, sauces, and other pumpable products intended for aseptic processing. The combination of ROSSI & CATELLI technology, the OLIMPIC system, and multitubular configuration provides an industrial solution for continuous sterilization and aseptic production processes. Machine available for inspection. Additional technical information, dimensions, photographs, or videos can be provided upon request.

Condition: excellent (used), FENCO Multitubular Aseptic Sterilizer – Stainless Steel FENCO multitubular aseptic sterilizer, designed for the continuous thermal treatment and sterilization of liquid, semi-liquid, and viscous food products in aseptic processing industrial lines. The equipment uses a tubular/multitubular heat exchange system that allows for the indirect and controlled execution of the different phases of product heating and cooling. This technology is especially suitable for processes where precise thermal treatment is required before storage or aseptic filling. Its configuration with multiple tubular sections in stainless steel provides a large exchange surface and allows for the integration of different thermal stages within a single continuous process installation. MAIN FEATURES -Manufacturer: FENCO -Type: Multitubular aseptic sterilizer -Technology: Tubular/multitubular heat exchange -Continuous thermal treatment -Indirect product heating -Heating and cooling sections -Multiple heat exchange modules -Stainless steel construction -Sanitary product connections -Integrated piping and valve system -Process pumps -Self-supporting industrial structure -Designed for aseptic processes -Integrable into complete aseptic processing and filling lines PROCESS The FENCO aseptic sterilizer is designed to circulate the product continuously through different heat exchange sections. Depending on the process configuration, the product can pass through preheating, heating, sterilization, holding, and cooling stages, controlling the necessary conditions before being transferred to a storage tank or aseptic filling system. Indirect exchange allows the treatment to be carried out while keeping the product separate from the heat transfer fluid. It can be integrated with: Preparation tanks Sanitary pumps Homogenizers Cedpfx Afezw E R Tj Aohc Deaerators CIP systems Aseptic tanks Aseptic fillers Complete UHT/aseptic lines APPLICATIONS Especially suitable for the fruit and vegetable, tomato, juice, puree, concentrate, sauce, and other pumpable food industries that require continuous sterilization before aseptic packaging. Depending on its configuration, it can be used with fruit juices, pulps, and purees, concentrates, tomato products, sauces, and other liquid or viscous products. The combination of FENCO technology, multitubular exchange, and sanitary stainless steel construction provides an industrial solution for continuous sterilization and aseptic production processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2002, condition: used, This listing is for the Ehret STE 1610/2/100 Sterilising Oven. The unit is in full working condition and is ready for immediate use. Overview The Ehret STE 1610/2/100 Sterilising Oven is a high-performance dry heat sterilizer designed for reliable and consistent sterilization of laboratory and pharmaceutical materials. Manufactured by Ehret, a trusted German brand in thermal processing equipment, the STE 1610/2/100 delivers precise temperature control and robust performance, making it ideal for applications requiring sterilization without moisture, such as glassware, metal instruments, and heat-stable laboratory components. Key Features Precise Dry Heat Sterilization High-Temperature Range: Operates up to 250 °C, suitable for complete sterilization and thermal decontamination. Uniform Temperature Distribution: Advanced air circulation ensures even heat distribution throughout the chamber. Validated Sterilization Cycles: Ideal for sterilizing glass, metal tools, and other heat-resistant materials with accuracy and repeatability. Robust Construction & Ergonomic Design Durable Stainless Steel Chamber: Corrosion-resistant and easy to clean, suitable for repeated sterilization cycles. User-Friendly Controls: Digital temperature controller with display for accurate setpoint adjustment and monitoring. Safety Features: Over-temperature protection, door interlock, and visual/audio alarms for enhanced operational safety. Technical Specifications Model: STE 1610/2/100 Temperature Range: Ambient +5 °C to 250 °C Chamber Volume: Approx. 100 litres Heating Method: Electrically heated with forced air circulation Temperature Control Accuracy: ±1 °C Construction: Stainless steel inner chamber; powder-coated steel exterior Control System: Digital PID controller with safety cut-off and time functions Power Supply: 230 V / 50–60 Hz (depending on configuration) Applications Pharmaceutical Laboratories: Dry sterilization of vials, stoppers, and instruments Chedpfxexhflxj Af Asc Medical Facilities: Sterilizing surgical tools, metal parts, and reusable components Research & Diagnostics: Sterilization of labware and experimental setups Industrial & QA Labs: Heat treatment, drying, and thermal conditioning of materials System Components Electrically heated drying/sterilization chamber Forced air circulation fan for uniform heating Digital control panel with setpoint and actual temperature display Safety thermostat with alarm system Removable shelving for flexible loading Quality Assurance All Ehret STE ovens are manufactured in compliance with DIN and ISO standards and undergo rigorous quality testing at the factory. Designed for reliable long-term use, the units support calibration, validation (IQ/OQ), and GMP documentation where required. Benefits Reliable Sterilization: Proven performance across thousands of cycles Accurate & Uniform Heating: Ensures consistent results and safe sterilization Low Maintenance: Durable components and easy-to-clean surfaces Safety-Compliant: Built with laboratory and industrial safety standards in mind Compact Footprint: Fits easily into lab or cleanroom environments Conclusion The Ehret STE 1610/2/100 Sterilising Oven is a dependable, precision-controlled dry heat sterilizer built for modern lab and pharmaceutical environments. Its combination of German engineering, validated performance, and operator-friendly design makes it a trusted solution for high-integrity sterilization processes.

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz Chodpfx Afslhqndj Aec - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Year of construction: 2018, condition: used, This listing is for a Solaris Biotech Solution Jupiter 3.0 Fermentor. The unit is in full working condition and is ready for immediate release. The Solaris Biotech Solution Jupiter 3.0 Fermentor is a highly versatile and configurable bioreactor system, ideal for laboratory-scale applications. With advanced automation and robust design, it caters to a wide range of research and development needs, as well as small-scale production. Key Features: Autoclavable and Sterilizable Design: Ensures ease of cleaning, sterility, and reliable operation for contamination-free processes. Flexible Vessel Options: Available in various aspect ratios and thermoregulation designs, with total volumes ranging from 2.0 L to 10.0 L. Pressure Control: Handles pressures up to 1.6 bar in the 2 L and 4 L jacketed vessels, with continuous gas-in and gas-out flux. Innovative SCADA Software (LEONARDO 3.0): Provides automated management of fermentation and cultivation processes, ensuring precision and ease of operation. Parallel Management: Supports simultaneous operation of up to 24 units via a single HMI with a 24” display, streamlining complex workflows. Remote Access: Enables monitoring and control via PC, tablet, or smartphone, using QR code scanning or a dedicated web portal for remote convenience. Applications: Process Development and Optimization: Facilitates experimentation and optimization of bioprocesses for scale-up and scale-down studies. Education and Research: Suitable for educational purposes and basic research in bioprocessing. Small-Scale Production: Supports small-batch manufacturing and pilot-scale processes. Chodpfx Afjxxz T Hj Ajc Benefits: Cost-Effective Performance: Combines advanced features with affordability for laboratory and production environments. High Level of Automation: Simplifies management of fermentation and cultivation with LEONARDO 3.0 software, reducing operator workload. Versatility and Configurability: Adaptable to a wide variety of applications, ensuring compliance with validated GMP regulations. Technical Specifications: Material: VALOX resin (external) and silicone (internal) Autoclavable: 121-133°C for up to 30 minutes Residual Volume: 0.04 mL Flow Rate: 65 mL/min

Year of construction: 2018, condition: used, This listing is for a Grant Controlled Rate Freezer - CRF-1 The unit is in full working condition and is ready for immediate release Product Overview: The CRF-1 Liquid Nitrogen-Free Controlled Rate Freezer is designed for precision-controlled freezing and cryopreservation of biological samples, such as embryos, stem cells, mammalian cells, spermatozoa, antibodies, tissue sections, and rodent organs. Unlike conventional liquid nitrogen-based freezers, the CRF-1 is liquid nitrogen and cryogen-free, eliminating contamination risks and making it suitable for use in cleanrooms and barrier facilities. It offers superior performance in terms of cell viability post-freezing and poses no fire hazard, unlike alcohol-based systems. The CRF-1 allows for highly accurate, reproducible, and controlled freezing rates, crucial for the cryopreservation of biological samples, ensuring optimal recovery upon thawing. Key Features: Cryogen-Free Design: The CRF-1 is free from liquid nitrogen and alcohol, offering a safer, cleaner alternative to traditional freezing methods. No contamination risk, making it ideal for use in sterile environments. Precise Cooling Control: The cooling rate is accurately controlled, especially for the critical nucleation/seeding phase, which ensures consistent and optimal recovery of cells. Wide Temperature Range: Capable of cooling down to -100°C with straws, offering a broad application range for biological cryopreservation. Simple Operation: The CRF-1 operates with or without a PC, and it can log data via PC software. Cooling profiles are displayed directly and can be customized. High Versatility: Compatible with cryovials, straws, bags, microplates, and Matrix-96-well block plates, allowing for research across multiple areas like stem cell research, transgenic embryos, mammalian cells, and more. Low Operational Costs: The CRF-1 runs at approximately 1% of the cost of liquid nitrogen-based freezing systems. Safety Features: Includes an optional Un-interruptible Power Supply (UPS) for complete cycle continuation in case of power failure. Compact & Quiet: Fits neatly on a bench-top and operates quietly, making it suitable for laboratory settings. Main Applications: Transgenic embryos research Stem cell research Chjdpexv Dz Iofx Af Aec Clinical and research samples like lymphocytes and tissue cell lines Mammalian cell preservation (e.g., cardiomyocytes, adipose, liver, muscle) Cord blood-derived stem cells Adherent cells and stem cells in microplates Cell suspensions in numbered/barcoded arrays Robotic integration for high-throughput applications Veterinarian IVF applications Technical Specifications: Dimensions (w x d x h): 264 x 367 x 445 mm Weight: 9.8 kg Max Plate Temperature: 30°C Min Plate Temperature: -80°C (standard) or -100°C (dependent on model) Temperature Accuracy: ±0.5°C Temperature Stability: ±0.1°C Temperature Uniformity: ±1.0°C Max Cooling Rate: 10°C/min Max Temperature Stabilization Time: 5 minutes Key Benefits: Accurate and Reproducible Cooling Rates: Ensures controlled freezing rates and precise sample temperature management. Customizable Cooling Profiles: Choose from linear and non-linear profiles, or create your own tailored profile. No Cryogen or Liquid Nitrogen: Ideal for reducing contamination risk and the cost of liquid nitrogen. Low Running Costs: Estimated to cost only 1% of traditional liquid nitrogen-controlled freezing methods. End-of-Cycle Cooling Stability: Maintains a steady -100°...

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,200 h, functionality: fully functional, total height: 3,250 mm, total width: 2,000 mm, total length: 7,870 mm, type of input current: three-phase, input voltage: 400 V, pressure: 90 bar, operating pressure: 90 bar, power: 120 kW (163.15 HP), compressed air connection: 6 bar, control voltage: 400 V, overpressure (max.): 100 bar, input frequency: 50 Hz, Sterilizer for natural and concentrated fruit and vegetable purees. Max. product infeed 5- 10,000 kg/h, depend of the product, sterilization temperature up to 110°C , holding time up to 120s. Steam consumption 2100kg/h. Complete with buffer tank 5000L, screw pump, piston pump, vacuum pump and filling machine MakropackTM2000_3 for aseptic filling of 220-liter bags. Csdjzpx Shspfx Af Aehc

Condition: used, functionality: fully functional, The Terumo SCD IIB Sterile Tubing Welder, P/N 72508 provides reliable, high-quality welds for sterile tubing connections, completes a weld cycle in 30 seconds, is compact and portable, requires minimal technical training and can be implemented seamlessly into existing processes. Chjdpfeuyu N Ejx Af Asc Tubing requirements: Polyvinyl chloride (PVC) tubing with a nominal outer diameter of 5.46 mm (0.215 inch) and a wall thickness of 0.84 mm (0.033 inch) or C-Flex tubing with a nominal outer diameter of 6.35 mm (0.25 inch and a nominal inner diameter of 3.18 mm (0.125 inch). Good working condition. Please check out our other listings as well.

Condition: used, functionality: limited functionality, machine/vehicle number: Biocap DNA, Used Captair Biocap DNA UV sterilization cabinet Manufacturer: Captair / Erlab Model: BiocapDNA Chodpfxexliivj Af Aec Voltage: 230V (50Hz)

Condition: excellent (used), functionality: fully functional, Production lines for fruit and vegetable preserves. A significant portion of the equipment is newer – from 2011 and 2014 – supplemented by older, robust machines that have proven their reliability through years of continuous operation. The machines are sold as a complete line. Line capacity (based on an example product) – approximately 1200 liter jars/hour (~1.5 tons/hour). This translates to approximately 28,800 jars/day, or ~36 tons/day. (I) What can be produced on this line: - Compotes (jars, bottles) - Jams and thick preserves - Juices (bottle filling, tube pasteurization) - Canned goods (sterilization in an autoclave) - Pasteurized preserves in jars (pickles, vegetables, sauces) (II) Process flow: 1. Product dosing – into buckets, jars (2 dosing machines) 2. Filling – bottles (filling machine), cans (dosing machine + seamer) 3. Thermal processing – boiling tank, evaporators (juice/puree concentration), tube pasteurizer (liquid product before filling) 4. Packaging closing – sealers (bottles, jars), capping machine 5. Sterilization/pasteurization of finished packaging – autoclave (cans, jars), tunnel pasteurizers (3 units) 6. Labeling – labelers for bottles, jars and cartons 7. Collective packaging – heat tunnels (shrink film), conveyors (III) Equipment list: 1. Carton labeler 2. Heat tunnel (shrink film) 3. Conveyors 4. Heat tunnel 5. Bottle labeler 6. Jar/bottle labeler 7. Heat tunnel x 3 8. Labeler (without control panel) 9. Tunnel pasteurizer x2 10. Dosing machine for buckets 11. Dosing machine + seamer for cans 12. Pleszew Autoclave (2011) 13. Tunnel pasteurizer 14. Dosing machine 15. Capping machine 16. Seamer 17. Bottle filling machine 18. Jar seamer 19. Dosing machine for jars x2 20. Tube pasteurizer 21. Evaporator x3 22. Boiling tank Total value: 2,380,000 PLN = ~ 545,000 EUR (IV) Why buy the entire line: Complete process line – from dosing to collective packaging – without the need to find missing components. Option for pickup with dismantling and transportation (to be agreed upon). Chedpfxsz Daats Af Asc Equipment used in production – documented history of use. Flexible sales options: entire line, separate technological units (e.g., canned goods section with autoclave, bottle filling section), or individual machines. Terms: Visit possible by prior arrangement. Transportation and dismantling to be agreed upon.

Condition: excellent (used), Year of construction: 2010, Sterile tank with agitator, temperature-controlled, upright Technical data / dimensions Available quantity: 1 Volume: approx. 6,000 liters Container type: Sterile tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,700 mm External diameter: approx. 1,854 mm Cylindrical height: approx. 2,264 mm Total height: approx. 5,390 mm Weight: approx. 2,030 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: negative pressure/vacuum Operating pressure: 3.5 bar Test pressure: 5.4 bar Wall thickness bottom: approx. 5.2 mm Wall thickness top: approx. 8.4 mm Wall thickness jacket / cylinder: approx. 5.2 mm Ground clearance: approx. 800 mm Operating temperature: 150 degrees Celsius Type plate available Manufacturer: GEA serial no.: 2376 Year of construction: 2010 Chjdpfx Afetyz Izo Ajc Material / condition Material inner jacket: V2A (1.4541) Material double jacket: V2A (1.4541) Feet material: V2A (1.4541) Outer surface: bright rolled 2B Internal surface: Ground Ra

Year of construction: 2001, condition: used, machine/vehicle number: 010786, -2x Autoclave Getinge GE 2606-1 -2x Steam generator Getinge 50 liters – 56 kg/h Cedpfx Afswx Hwao Ashc -2x Vacuum pump Sterling SIHI Lema 90 AZ

Condition: excellent (used), Year of construction: 2007, - Capacity: 10,000 bottles/hour - Year of manufacture: 2007 - Equipped with an ozone generator - Manufacturer: PROMEC - Model: Rotonech - M1110-36 - 2 - Type: Two-channel sterilizer-rinser - With recirculation tank, pump, and filter - Nozzle heads: 36 pieces - With enclosed hood and ozone air extraction - Conveyor height: 1250 mm (including additional base supports) Chsdpfx Afszb H Nme Asc - Bottle formats: from 55 mm to 99.8 mm (total of 20 different bottle types) - Direction of travel: Left to right Dimensions: - Width: 1900 mm - Depth: 2200 mm - Height: 2250 mm - Machine available from the end of July 2026 - Machine in good condition

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Chsdpjxxz I Rsfx Af Asc Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.

Condition: good (used), Year of construction: 1984, - 6 rows of bottle cages - WITHOUT OZONE GENERATOR Codpferalr Hsx Af Aohc - Machine in working condition - Machine available immediately - Video available on request

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. Chodpfxoxxy S Uo Af Ajc The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.