Used Cap Nut for sale (34,488)

Year of construction: 2010, operating hours: 219 h, Condition: used, Field of application: Grounds care Empty weight: 384 kg General condition: average Technical condition: average Visual appearance: average Transport dimensions (LxWxH): 1,7x1x1,4 Production country: US Klelhcdovc Ehgjwusr Please contact Vink Machinery for more information Minuteman Powerboss SC2832E * 219 hours of operation * 80 cm scrubbing width * Separate charger * New scrub brushes * No batteries included

Condition: excellent (used), TETRA PAK APPLICATOR TCA45 CONVERTED TO HELICAP27 1000 PRISMA YOM 2006 FULL COMPLETE EXCELLENT CONDITION DISMANTLED AND PACKED INTO TETRA BOX Kjlhcdwjuzv E Rjujlr VIDEO IN RUNNING CONDITION UNDER REQUEST

Year of construction: 2025, Condition: new, Picture 1: Offered Set of two load moving skates with 6tonnes capacity each. You can move 12tonnes in total. The skate system is equipped with high quaity polyurethane wheels. other pictures: Load moving skates in different sizes from 60-220mm height and capacities between 5 and 220 tonnes. Available as 3-Point, 4-Point, Containerskates, 360° Rotational skates with Polyurethane wheels (for all floors) or Nylon wheels (for flat and smooth floors). Kelhcdwsgi Dl Nsuolr Please send us an inquiry with information about the weight and project you have to move. We will then send you a detailed offer. Short delievery times, typicalles in stock. Pictures show a selection.

Condition: as good as new (ex-display), MJ3 213680 - 27726 lifting gear with cubic travelling nut design and TR spindle Model: MJ3 213680 - 27726 Type: MJ3-GN-1F-KGS3220-0165-FP-BL-RP19-MG140"B(+A)"-SoFETT-2E Kjljukrwgjhcdwuelr Condition: As good as new

Condition: used, power: 99 kW (134.60 HP), gearing type: hydrostat, fuel type: diesel, lifting height: 25,000 mm, axle configuration: 4x4, Year of construction: 2022, operating hours: 1,540 h, Equipment: all wheel drive, Drive: Wheel Empty weight: 18.000 kg Klelhotr Np Eocdwujr Make of engine: Deutz Lifting capacity: 6.000 kg Top speed: 40 km/h Serial number: 00005296 Transport dimensions (LxWxH): 7.63x2.53x3.15 Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: new, Year of construction: 2024, - NEW MACHINE OFFER - Cutting of fixed lengths according to cutting list and cutting out of defects Cutting cycle: Capping of imperfections by chalk marking Cutting with fixed lengths, Standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths for single piece loading WS.1 Continuous cross-cut saw 4 lower infeed rollers 1 loading table 2 mt. Right with double marking table 1 pc. Outfeed table 1 mtr. with rear stop Height of rollers adjusted manually 12 pcs. luminescent chalk Cutting capacity: Pos. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Pos. B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control with: 7" color touchscreen Editing of cutting cycles directly on the machine Programming variants: - Defect caps through marking Klelhcju Nhcqodwuer - Working with cutting list consists of 10 dimensions, repetition option for each dimension each dimension and total number of pieces for each dimension 100 memory locations for cutting lists Recognition system of the last two pieces to be cut and the following piece Electronic control of the sorting unit with no. 1 ejection kicker (ejection kicker optional) Technical features: Feed system motorized adjustment brushless and toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm. Carbide blade diameter 500 mm. Motor power 7.5 kW Cutting speed per minute up to N°100 Minimum bar length mm.550 Minimum bar width mm.40 min. Workpiece thickness 15 mm Further options on request

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table T-slot table -Table surface: 300 x 300 mm -Y-axis: 50 mm movable, rotary wheel with fine adjustment, see photos Kjloqddkvshcdwujlr -T grooves: groove width 12 mm, groove spacing 80 mm -Total dimensions: 420/330/H90 mm -Weight: 48 kg

Condition: good (used), mileage: 1,69,000 km, power: 353 kW (479.95 HP), first registration: 11/2013, fuel type: diesel, color: white, axle configuration: 8x4, fuel: diesel, wheelbase: 3,750 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro6, suspension: air, Year of construction: 2013, Equipment: air conditioning, cruise control, navigation system, parking heater, sleeping cabin, = Additional Options and Accessories = - Aluminum fuel tank - Power brakes - Electric windows - Electronic Braking System (EBS) - High beams - Speed limiter - Air conditioning - Leather interior - Leather upholstery - Air horn - Fog lights - Reversing camera - Sunshade - Stability control - Auxiliary heating - Toolbox - Xenon lights - Power take-off (PTO) = Remarks = Scania R480, 8x4, Euro 6, combined vacuum/high-pressure truck, with stainless steel tank, built in 2013 Further information: Kolhcjv Tfclsdwuolr Engine: 480 hp Transmission: Opticruise (with clutch pedal) Suspension: Air-to-air Mileage: 169,000 km Wheelbase: 3750 mm Environmental class: Euro 6 First registered: November 7, 2013 Electric Power windows and mirrors Air conditioning Rearview camera Webasto (cabin heater), engine preheater... Last technical inspection at 164,000 km (September 20, 2024) Last service at 163,000 km The truck is in good and fully functional condition, with no active faults/warnings. Body: CAPPELLOTTO CAP Combi 3200, CL/TE1, 226 kW, Operating hours: 942 hours Remote control, sludge suction and high-pressure flushing with stainless steel tank, URACA P-45, HIBON 820, Webasto Thermo 300, Vogelsang VX 136-140 transfer pump... Overall rating: Overall rating (1-5): 4.5 Front tire condition: 50% (or new tires at an additional cost) Rear tire condition: 50% (or new tires at an additional cost) = Further information = Technical information Engine displacement: 12,740 cc Drivetrain AdBlue system: Yes Fuel tank: 300 liters Axle configuration Suspension: Air suspension Front axle 1: Steered; Left tire profile: 50%; Right tire profile: 50% Front axle 2: Dual tires; Left tire profile inside: 50%; Left tire profile outside: 50%; Right tire profile inside: 50%; Right tire profile outside: 50% Rear axle 1: Dual tires; Left tire profile inside: 50%; Left tire profile outside: 50%; Right tire profile inside: 50%; Right tire profile outside: 50% Rear axle 2: Lift axle; Steered; Left tire profile: 20%; Right tire profile: 20% Functional Body make: Cappellottto CAP Combi 3200, CL/TE1 Interior Upholstery: Leather Maintenance, history, and condition General technical inspection (ATO): inspected until October 2025 Technical condition: good Visual condition: good

Year of construction: 1993, Condition: used, Cap 6 tray round for deodorant Kljlhcdwec Nw Rnsusr Forms built in 1993 she rgutezustande

Condition: new, Year of construction: 2025, Window drip cap roll forming machine PO-1 allows to produce “window trim” profile by rolling the sheet metal through forming rolls. A window trim is an element that is widely used in construction while windows installation. In the standard way the window trim is bent step by step using a manual folding machine. This is a cheaper, but more time-consuming process. The metal sheet must be pre-marked for each bending operation. Each bend is then performed using a manual bending machine. The operator must set the necessary dimensions according to the marks, fix the sheet metal with the machine"s fixation mechanism, and then bend it. The length of the window trim is limited to the maximum working length of the bending machine. Thus, each manual folding operation is time-consuming and the production process becomes expensive and inefficient. To improve the production process we offer the window drip cap roll forming machine PO-1. This machine rolls the window trim profile on both sides simultaneously in a single operation. The rolling speed is 10 m/min. The machine is equipped with 7 pairs of forming rolls. The minimum width of window trim is 120 mm when rolling on both sides at the same time and the maximum width is 610 mm. To change the width of the window trim, simply use the adjusting handle, which makes it very easy to adjust the machine to go from one trim width to the next. Thus, the adjustment process is not time-consuming. It’s also possible to roll the window drip cap on the machine in two steps. Klslhcjlwt Adjdwusr

Condition: used, Year of construction: 2011, operating hours: 1,136 h, General information Field of application: Construction Serial number: CE145877 Weights Empty weight: 2.235 kg Functional Lifting capacity: 450 kg Working height: 1.020 cm Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Transport dimensions (LxWxH): 2.45x1.2x2.26 Klolhcdsvflq Hjwujr Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: excellent (used), Year of construction: 2005, operating hours: 3,320 h, Functionality: fully functional, machine/vehicle number: 013, pressing force: 115 t, metric thread diameter (min.): 6 mm, metric thread diameter (max.): 10 mm, The machine is minimally used (3320 hrs) and in very good used condition. It has only been used to produce a small amount of stainless-steel flange nuts and washers. A wire heating device in front of the machine is also available as an option. The machine is still connected to power and possible to view in short demonstration runs. It is located in Sweden approx 2,5 hrs from Stockholm/Arlanda. For full specification please send e-mail. SPECIFICATIONS: NO. OF FORGING STATIONS:5 CUT-OFF DIAMETER (MAX.): 17mm CUT-OFF LENGTH (MAX.): 17mm KICK-OUT LENGTH (MAX.): 20mm PUNCH KICK-OUT LENGTH (MAX.): 10 Klslhcewbq Ihjdwujr CUT-OFF QUILL (DIA X LENGTH): 55x68mm MAIN DIE (DIA X LENGTH): 75x80 DIE PITCH: 87mm PUNCH HOLE (DIA X LENGTH):55x120 RAM STROKE:110mm FORGING POWER:115 tons PRODUCT SIZE:3/8", 10mm OUTPUT (MAX.): 180 pcs/min POWER: 380V 3-PHASE, 50Hz, 125A WEIGHT: ~16 tons

Condition: excellent (used), mileage: 62,644 km, power: 302 kW (410.61 HP), first registration: 09/2012, fuel type: diesel, axle configuration: 6x2, tire size: 385/55, fuel: diesel, brakes: engine braking, gearing type: automatic, suspension: air, Year of construction: 2012, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, spoiler, = Additional Options and Accessories = - Aluminum Fuel Tank - Power Brakes - Roof Spoiler - Power Windows - Electrically Adjustable Exterior Mirrors - Remote Central Locking - High Beams - Low Noise - Speed Limiter - Refrigerator - Air Suspension - Air Horn - Fog Lights - Radio/CD Player - Reversing Camera - Side Skirts - Sunshade - Stability Control - Auxiliary Heater - Toolbox - Xenon Lights - Central Locking = Additional Information = Transmission: 16-Speed, Automatic Suspension: Air Suspension Front Axle: Tire Size: 385/55; Steered; Left Tire Profile: 90%; Right Tire Profile: 90% Klolhcdwjwb Sucoujr Rear Axle 1: Tire Size: 315/70; Dual Tires; Differential Lock; Left Tire Profile: 90%; Tire profile left outer: 90%; Tire profile right inner: 90%; Tire profile right outer: 90% Rear axle 2: Tire size: 385/55; Lift axle; Steered; Tire profile left: 90%; Tire profile right: 90% Sunroof: Yes Technical condition: very good Visual condition: very good Contact Maarten Busser or Niels Busser for further information.

Condition: excellent (used), Sorting, feeding and capping machine Cap placement and screwing station without filling station Fully automatic filling and capping system by feeding a filling unit with filling needle Cap sorter and capper for lids and caps up to Ø 20 mm Mode of operation When the machine is started, the caps and lids aligned in the sorter are fed underneath the cap applicator and screwing heads using a feed system. Klolhcoqazcgedwujr Cappers include screw cappers for screw caps and lid pushers for stoppers and caps 3 x bowl feeders for bottles, stoppers and caps 1 x capping station 1 x cap application station Container height 55 mm Container diameter 20 mm Cap diameter 20 mm Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Year of construction: 1995, Condition: new, Cap 16 x Inshergutezustande forms of year 1995 Klolhoc Nw Rfecdwuor

Year of construction: 2006, Condition: used, Automatic rotary drum stainless parts and cap dispenser Bünder Schmitt Series 1 Production: Bünder Schmitt Tip: LINE 1 Year of manufacture: 2006 drum diameter: 1000 mm doseable component size: diam. 25mm x 10mm Siemens control. Stainless steel. Klslhcdwoukg Imsuor

Condition: used, Year of construction: 2011, operating hours: 871 h, General information Field of application: Construction Serial number: CE145881 Weights Empty weight: 2.235 kg Functional Lifting capacity: 450 kg Working height: 1.020 cm Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Kjlsvd Ah Tjhcdwuelr Tyre brand: - Transport dimensions (LxWxH): 2.45x1.2x2.26 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: excellent (used), Manufacturer: Hoppmann Type: FT15-2L SS Stainless steel hopper. Adjustable, heavy-duty dosing tool frame Teflon hard coating, anodized aluminum bowl Polycarbonate coverings Dual motor drive system + linear feeding belt 1300 mm Overall diameter: 584.0 mm Koleh Nyctjhcdwuelr Overall height: 405 ± 25 mm Bowl emptying height: 324 ± 25 mm Bowl inner diameter: 406.0 mm

Condition: used, Year of construction: 2011, Field of application: Construction Drive: Wheel Empty weight: 2.235 kg Lifting capacity: 450 kg Kolstr I Eqshcdwuslr Working height: 1.020 cm Serial number: CE145102 Transport dimensions (LxWxH): 2.45x1.2x2.26 Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Year of construction: 2011, General information Field of application: Construction Serial number: CE145928 Weights Empty weight: 2.235 kg Kljlevkaxcehcdwusr Functional Lifting capacity: 450 kg Working height: 1.020 cm Other information Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 2.45x1.2x2.26 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Year of construction: 2014, operating hours: 1,290 h, General information Field of application: Construction Serial number: GS6914-3407 Weights Empty weight: 4.082 kg Klolhcdwowckf Aeujr Functional Lifting capacity: 454 kg Working height: 1.190 cm Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Transport dimensions (LxWxH): 3.76x1.75x2.59 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Year of construction: 2011, General information Field of application: Construction Serial number: CE145044 Klelhcsv U I D Iedwuor Weights Empty weight: 2.235 kg Functional Lifting capacity: 450 kg Working height: 1.020 cm Other information Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.45x1.2x2.26 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, power: 127 kW (172.67 HP), fuel type: diesel, lifting height: 20,600 mm, Year of construction: 2011, Technical information Make of engine: Mercedes-Benz Top speed: 36 km/h Empty weight: 17.500 kg Functional Lifting capacity: 5.000 kg Identification Serial number: 759993 Klolhcdweuythaoujr Other information Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: Mitas Transport dimensions (LxWxH): 7.96x2.43x3.05 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, power: 127 kW (172.67 HP), fuel type: diesel, lifting height: 20,600 mm, Year of construction: 2011, Technical information Make of engine: Mercedes-Benz Top speed: 36 km/h Empty weight: 17.500 kg Functional Lifting capacity: 5.000 kg Identification Kslhcdwouygt Nouolr Serial number: 759993 Other information Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: Mitas Transport dimensions (LxWxH): 7.96x2.43x3.05 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, mileage: 67,400 km, lifting height: 59,100 mm, Year of construction: 2018, General information Field of application: Construction Serial number: 076646 Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Klslhcdwotr Nuqouer Upper engine: Perkins Transport dimensions (LxWxH): 16.85x2.75x4 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information