Used Capper for sale (244)

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data - Line type: Returnable glass bottling line - Application: Beverage filling in returnable glass bottles - Formats: 0.33 L and 0.75 L glass bottles - Packaging: Bottles in crates - Filler capacity: 18,000 bottles/hour - Premix capacity: 22,000 L/hour - Closure type: Plastic screw caps - Labelling: Wet glue labelling, 2 aggregates - Main machine years: 1996 – 2016 - Dismantling planned: February 2027 Gbjdpeza Tx Sofx Aatot Scope of Delivery - Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated - Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 - Crate Decapper | RINK | KM 690/4K | 2012 - Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 - Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 - Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 - Empty Bottle Inspector | Krones | Linatronic | 2014 - Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 - Labelling Machine | Krones | Universella | 2012 - Closure Inspection | Syscona | Expert FHK | 2016 - Inspection System | Krones | Checkmat 731 | 2012 - Crate Packer | Kettner | 1996 - Crate Inspection | Krones | Checkmat 708 | 2011 - Palletizer | Matec | Rotomat 3B | 2002 - Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000

Condition: used, Year of construction: 2012, Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications - Output: 7,800 bph - Producs: Beer and CSD - Formats: - NRW 0.5 l - 0.33 l ring neck - 0.25 l LN Gbodpfx Aajyb Sbustot Machine List  - Machine type: Decrater - Manufacturer: BMS - Year of manufacture: 2012 - Machine type: Decapper (Screw Cap) - Manufacturer: Rink - Decapping in the crate Euro 0,5l in 4x5 crate - Year of manufacture: 2012 - Machine type: Bottle washer - Manufacturer: Gera - Year of manufacture: 2024 - Machine type: Empty bottle inspector - Manufacturer: Krones - Model: Smarttronic - Incl. Pusher - Year of manufacture: 2012 - Machine type: Filler - Manufacturer: Kosme - Model: Isofill G 28/960 - 28 Valves - Year of manufacture: 2012 - With Combi Capper 4 heads(Crown Cork and Screw Cap) - Capacity: - 7,800 bph - Machine type: Labeling machine - Manufacturer: Krones - Model: Robusta - Refurbished in 2012 - 10 Bottle plates - 2 Label stations with 4 grippers and 4 glue pallets - Inkjet printer - Machine type: Crater - Manufacturer: BMS - Year of manufacture: 2012 - Crate format: Modul Crate 4x5

Condition: used, machine/vehicle number: 04 897, consisting of: Gedpfszx Ddnex Aatebt Rinser 15 Nozzles Vacuum filler 16 Filling valves Screw capper 3 heads 22 mm screw cap

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes - Closures: - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones Gbsdpfxoyx I Awe Aatet - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h

Condition: used, machine/vehicle number: LC650, Used Sidel bottling line for still - sparking water - 14400 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET bottle handling and optimized for water production, covering both carbonated and still products. The system combines isobaric filling technology with robust end-of-line packaging, offering reliable performance for medium-speed beverage production.Production speed (maximum): 14,400 bph with 0.5LAdditional speeds: 9,000 bph with 1.5L still water; 7,000 bph with 1.5L carbonated waterBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottlesContainers: Designed for PET bottles with air conveyors for empty bottle transportFiller technology: Isobaric; neck 26 mmLabeling: KHS Innoket 21 N (2002) and SACMI OPERA (2011)Shrink wrapper: SMI LSK45 T (2001)Pallet wrapper: TOSA 125 (1995)Chiller: M.T.A. TAEevo TECH 121 (2025)Ancillary equipment: SIAD Macchine Impianti unit (1999)Electrical highlights (components): SMI LSK45 T: 400 V, 50 Hz, 22 kW, 37 A; M.T.A. chiller: 400 V, 50 Hz, 20 kW, 35 A, IP54Advanced Automation & Control SystemsThe line benefits from upgraded controls to ensure repeatable operation and ease of use. Air conveyors for empty bottles and belt conveyors up to the shrink wrapper have been overhauled and equipped with new electrical panels. The capper has also been overhauled with a new electrical panel, supporting stable operation and format reliability.Overhauled conveyor controls with new electrical panelsCapper overhauled in 2012 with new electrical panelCE-marked components across key stationsFormat pre-sets on the labeler for multiple bottle sizesProduction Line Integration CapabilitiesEngineered for smooth in-line operation, this second hand bottling line integrates air conveyors for lightweight PET handling, precision labeling, and robust end-of-line packaging. Quick changeovers are supported by pre-configured labeling formats, enabling efficient switches between common water bottle sizes.Inline configuration from bottle handling through packagingAir conveyors for empty bottles and belt conveyors up to shrink-wrapperLabeling line-up: KHS Innoket 21 N and SACMI OPERA for multi-format flexibilityEnd-of-line shrink wrapping with SMI LSK45 T and pallet stabilization by TOSA 125Bottle size range: 0.5L, 1.0L, 1.5LSuitable for water production (still and carbonated)Machine Condition & Maintenance HistoryThe line includes several components that have undergone maintenance and overhauls aimed at improving reliability and uptime. Air and belt conveyors up to the shrink-wrapper have been revised, with new chains and new electrical panels installed. The capper was overhauled in 2012 and fitted with a new electrical panel. The KHS Innoket 21 N labeler is set up for multiple formats, streamlining changeovers.Conveyors overhauled; new chai... Gjdpezg In Tefx Aatebt

Condition: good (used), Year of construction: 1996, Used capper was part of a carbonated drink and water line working in good condition Godevtpt Iopfx Aatobt

Condition: like new (used), Zalkin Gbodpfsd Ecm Hsx Aatet Model: CA3 six head rotary capper stainless frame, 30mm cap diameter, up to 90 bottles per min, also have a Hema filler that went inline with this, full manuals / electrical drawings.

Condition: used, Year of construction: 2009, machine/vehicle number: LC606, Used Krones bottling line for beer in glass 60.000 BPHTechnical Specifications & Performance DataThis used bottling line is engineered for high-speed beer production in glass containers and is suitable for second hand industrial packaging applications. The line integrates washing, inspection, filling, capping, pasteurization, case packing, palletizing, and conveyor handling for efficient beverage production.Production speed: 60,000 bottles per hourContainer type: Amber glass beer bottlesBottle format: 0.45 L (nominal); brimful 0.464 L ± 4 mlFilling height: 45 mm from the top edgeMain filler/capper: Krones MECAFILLEmpty bottle inspection: Toptronic 19 (EBI)Pre-/post-fill inspection: Krones Checkmat; full bottle inspection and level/cap controlBottle washer: Krones LavatecTunnel pasteurizer: SHIELDCase packer: SmartPac Einpacker for crate insertionPalletizer: Krones Pressant SoperConveyor system: Krones Synco SElectrical supply: 400/230 V, 50 HzRepresentative loads (components): up to 182 A (control unit), 41 A (pasteurizer), 23 A (palletizer), 8 A (wet-end inspection equipment)Year of construction (key components): 2009Advanced Automation & Control SystemsThe line combines synchronized conveyor controls with integrated inspection systems to maintain consistent product quality at high throughput. Centralized operator interfaces provide clear status feedback for the filler/capper, inspection modules, pasteurizer, and end-of-line equipment. Electrical architecture follows standard industrial beverage production practices for reliability and maintainability.Main power: 400/230 V, 50 HzIntegrated inspection: Empty bottle inspector, pre-fill and post-fill Checkmat controlsAutomated bottle handling and crate insertion to sustain continuous operationDesigned for rapid fault detection and line recovery through modular stationsProduction Line Integration CapabilitiesConfigured as an inline system, this used bottling line is designed for seamless transfer between wet end processing, filling and capping, thermal treatment, and dry end packaging. The Krones Synco S conveyor network ensures stable bottle flow and accumulation management.Inline operation with coordinated starwheels and conveyorsGlass bottle handling optimized for beer applicationsDownstream compatibility with crate packing and palletizingFocused on 0.45 L glass format for high-speed runsMachine Condition & Maintenance HistoryThe line is presented as a second hand solution in ready-for-operation condition. Key components are from 2009, reflecting modern engineering suitable for high-speed beer bottling. Operational details, service records, and maintenance logs can be aligned with on-site inspections and testing duri... Godpfjyr Huqjx Aatjbt

Condition: excellent (used), SOMME 343 Automatic Capper with 7-Piston Filling Unit SOMME 343 automatic capper equipped with a 7-piston filling unit, designed to integrate the dispensing, filling, and capping operations of containers within an automated food production line. The system combines a volumetric filling system with 7 pistons and an SOMME 343 automatic capper, enabling continuous dispensing of the product and subsequent closing of the container. The piston filling technology is particularly suitable for products that require controlled volumetric dispensing, including liquid, semi-liquid, and viscous products, depending on the installed configuration. MAIN FEATURES -Capper manufacturer: SOMME -Model: 343 -Type: Combined filling and capping line -Filling unit: 7 pistons -Volumetric filling system -Simultaneous dispensing using multiple pistons -Automatic capping of containers -Continuous industrial operation -Automatic feeding and positioning of containers -Integrated transport system -Automatic transfer between filling and capping -Robust industrial construction -Designed for automated production -Integrable into complete packaging lines Gbodozxcghjpfx Aatjt PROCESS The containers are automatically fed to the 7-piston filling unit, where they are positioned to receive a controlled amount of product. The volumetric system performs the dispensing, and once the filling is complete, the containers are automatically transferred to the SOMME 343 capper, where the capping operation is performed before continuing to the next stage of production. Combining both operations in a single line allows for a continuous flow between filling and capping, reducing intermediate handling of the container. It can be integrated with: Product feeding systems Container feeders Cap feeders Conveyors Weight checkers Inspection systems Pasteurizers and autoclaves Container washers Labeling and coding machines End-of-line equipment APPLICATIONS Particularly suitable for canning industries, sauce manufacturers, tomato product manufacturers, cream, puree, pate, food preparation manufacturers, and other packaging industries that require automating filling and capping simultaneously. The 7-piston filling unit + SOMME 343 capper provides a compact solution for industrial lines that require automatic volumetric dispensing and subsequent container capping. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 1997, Type: 12/24/1, Year of construction 1997; Gbedezx Avcjpfx Aatet Rinser - filler with neck-handling - capper (PCO 28 and sports cap); direction: right-left; formats: 500 ml + 1500 ml PET, for 28 mm PCO28. Dimensions: Rinser 1.500 mm x 1.500 mm x 2.750 mm; Füller 2.000 mm x 1.800mm x 2.850 mm; Verschließer 1.000 mm x 800 mm x 2.750 mm. The height is because of the security case around the machine.

Condition: used, Year of construction: 2018, Overview  This glass bottle filler and capper was manufactured in 2018 by the Italian company GAI. The MLE 661 Bier model is a compact and precise filling monoblock designed for small to medium-sized breweries and beverage producers. It features Pick & Place technology for pilfer-proof aluminum screw caps (30x20 mm) and an electronic fill height adjustment system for easy format changes. With a capacity of up to 900 bottles per hour, the unit is suitable for bottles ranging from 0.25 L to 1.0 L. The machine is in very good condition and ready for operation. Technical data - Filling system: Isobaric (for beer and other carbonated beverages) - Capacity: 900 bottles/hour - Bottle formats: 0.25 L – 1.0 L - Closure type: Pilfer-proof aluminum screw caps (30x20 mm), Pick & Place system Gbjdpfxexn A R Es Aatst - Electronic fill height adjustment - Stainless steel construction

Condition: used, Year of construction: 2017, Overview Gedpozcu Sljfx Aatsbt This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data - Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) - Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm - Closure types: Crown caps - Filling system: Isobaric (for beer and carbonated beverages) - Product types: Beer and other carbonated drinks - Incl. dummy bottles and CIP cups - With double pre evacuation systsem for lower oxygen pick up - Machine is cleanable with a CIP system

Condition: excellent (used), SIDEL / HEMA SF Classic MV2 Volumetric Filler SIDEL / HEMA SF Classic MV2 automatic volumetric filler, designed for the precise dosing and filling of food products into containers within continuous industrial production lines. The equipment uses a volumetric filling system, allowing control over the amount of product introduced into each container and maintaining uniform dosing throughout the production process. The SF Classic MV2 incorporates a product feeding hopper, automatic container transport, and a control system with a Siemens HMI, offering an automated solution for professional filling applications in the food industry. MAIN FEATURES -Manufacturer: SIDEL / HEMA -Model: SF Classic MV2 -Type: Automatic volumetric filler -Volumetric dosing system -Automatic product feed -Integrated product hopper -Automatic container handling -Integrated infeed and outfeed conveyor -Automatic container positioning -Control panel with Siemens HMI -Construction primarily in stainless steel -Perimeter safety guards -Designed for continuous industrial operation -Integrable into automatic filling and packaging lines APPLICATION The SIDEL / HEMA SF Classic MV2 is designed to automatically dispense a controlled volume of product into each container. The product is fed from the top hopper to the volumetric system. The containers arrive automatically via the conveyor, are positioned in the filling area, and receive the set amount of product before continuing to the next stage of production. This system is particularly suitable for applications where dosing consistency, automated filling, and continuous operation are required. It can be integrated with: Product feeders Container conveyors Seamers and cappers Can closers Cap feeders Weight checkers Gbsdszw Dgyjpfx Aatot Inspection equipment Labeling and coding machines Packaging equipment and end-of-line equipment Complete automatic filling lines APPLICATIONS Especially suitable for canning industries, food manufacturers, sauce producers, food preparation companies, and other processing plants that require an automatic volumetric filling system. Depending on the installed configuration, it can be used for different liquid, semi-liquid, viscous, or particulate food products, adapting to the specific product and container format. The combination of SIDEL / HEMA technology, volumetric dosing, and automatic container handling makes the SF Classic MV2 a particularly interesting solution for continuous industrial filling lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2020, Overview  This complete bottling line was last used for bottling spirits and includes a rinser filler combo with capper for t cork, conveyor belts, carton erector and sealer. The line achieves a maximum output of 2,000 bottles per hour, depending on the bottle volume and product. As production volumes are increasing, the seller has received a new line with higher capacity. To present the line in decent condition, the seller has installed it in the ware house. Technical details  - Output: 2,000 bottles/hour Gbjdpswqpkajfx Aatst - Different bottle shapes possible as the height and width can be adjusted - Bottle volumes from 0,5l to 3,0l are possible - Last used for: Spirits, can also be used for other liquids Scope of delivery  - Project AE PRORINS2000 Linear rinser with speed up to 2,000 bph (2020) - Project AE PROFILL2000 Linear filler with 10 electrically controlled filling valvesc(2021) - Borelli Capper for T-cork - Conveyor belts - Lantech C-300 carton erector (2021)

Condition: used, Year of construction: 2013, Overview Complete filling line for non-returnable glass bottles with an output of approx. 16,000 bottles/h at 0.75 L and approx. 20,000 bottles/h at 0.33 L. The heart of the line is a KOSME BARIFILL RFC 50-60-10 VKP rinser-filler-capper block built in 2013. New glass is fed by a Krones sweep-off depalletizer from 2020; downstream, the line comprises Krones CHECKMAT cap control, a KHS INNOKET cold-glue labelling machine with camera-based label orientation, a Krones WRAPAPAC wrap-around packer and a GEA Procomac OPERA palletizing system with Robopac stretch wrapper and Logopack pallet labelling. An attractive mid-range line for water, soft drinks, beer, cider and other glass-bottle applications. Technical data - Year of manufacture: mainly 2013 - Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L - Application: filling and packaging of non-returnable glass bottles - Filling system: short-tube VKP, 60 filling valves, 113 mm pitch - Rinser: 50 stations, single-channel, 113 mm pitch Gbodpfx Aezv Tu Deatjt - Filler block electrical supply: 400 V, 50 Hz, 17 kW installed power, 38 A - Filler block compressed air: 6 bar, approx. 450 Nl/min; water: 4 bar, approx. 3.5 m³/h - Filler block weight: approx. 10,500 kg - Integrated foam cleaning; touchscreen HMI on articulated suspension arm Scope of Delivery - Depalletizer | Krones | PRESSANT UNIVERSAL 1A | sweep-off depalletizer for new glass, servo-driven four-sided centering carriage, pallet lifting unit, approx. 5,000 mm discharge table, approx. 48,000 containers/h | 2020 - Rinser-filler-capper block | KOSME | BARIFILL RFC 50-60-10 VKP | stainless steel frame, transparent protective guarding with safety interlocks, process piping, layout drawing available | 2013 - Capper | Zalkin | CA9 360 NG | 10 capping positions, approx. 22,000 bottles/h; capping heads included | 2013 - Cap control | Krones | CHECKMAT - Labelling machine | KHS | INNOKET KL2040/120-30 LM | cold glue, up to 26,000 bottles/h, camera system for label orientation, Siemens S7 control, new HMI touch panel 2019, formats incl. 0.33 L Longneck, Steinie and swing-top and 0.5 L NRW bottles | 2004 - Wrap-around packer | Krones | WRAPAPAC | 45 cartons/min, carton format e.g. 15 x 750 ml glass bottles, Nordson PROBLUE LIBERTY 14 hot-melt unit with automatic fill system | 2003 - Palletizer | GEA Procomac | OPERA | low-level infeed, automatic changeover of pallet patterns and pallet sizes, complete pallet conveying system, pallet magazine, mother pallet handling | 2009 - Stretch wrapper | Robopac - Pallet labelling system | Logopack - Conveyors | KOSME | bottle transport between the machines, line divider and discharge | 2013 Condition Used. The core of the line is installed in an industrial production environment and still under power; the rinser-filler-capper block underwent extensive maintenance in Q4/2025 and can be visited and inspected in operation on request. The labelling machine was in production until January 2025, was overhauled in 2019 and is currently in storage. The line is composed of components from several production sites. Availability From mid-December 2026. Location: Germany.

Condition: used, Year of construction: 2007, machine/vehicle number: LC385, Used Complete Line for PET and Glass 2007 Rinsing Machine: Manufacturer: Dipran Model: Marea 12P Year: 2007 Gbsdpfx Ajvgufvoatet The used complete line for PET and glass bottles includes a high-quality rinsing machine. Manufactured by Dipran in 2007, the model is Marea 12P. This machine ensures thorough and efficient rinsing of the bottles, preparing them for the filling process. Filling Monoblock: Manufacturer: NELDEN Model: Giove FC VA 20-1 Big Year: 2010 The line also features a reliable filling monoblock manufactured by NELDEN. The model is Giove FC VA 20-1 Big, and it was produced in 2010. Using a gravity filling method, this monoblock precisely fills the bottles with the desired product, ensuring accuracy and consistency. Labeling Machine: Manufacturer: Newtec Model: Fix S2 E2 Year: 2007 Included in the line is a Newtec labeling machine, model Fix S2 E2, manufactured in 2007. With its mechanical cam, this machine efficiently applies labels to the bottles, providing clear and professional branding for the products. Case Erector: Manufacturer: SistAI Model: HM 2000 Year: 1995 To complete the packaging process, a case erector by SistAI is included in the line. The HM 2000 model, manufactured in 1995, is a reliable machine that swiftly erects cases for efficient packaging and transportation of the bottles. Additional Details: The line’s production speed with 5-liter containers is 1800 to 2000 pieces per hour. The rinsing machine utilizes microfiltered water for treatment. The capper of the filling monoblock is equipped with interchangeable heads and channels based on production requirements. Cap sizes for screw caps include aluminum caps measuring 35 x 18 and plastic caps measuring 48 x 17. Used Complete Line for PET and Glass 2007, this complete line is in excellent condition and ready immedately for sale

Condition: used, Year of construction: 2016, Overview This GAI MLE 661 BIER is an isobarometric rinsing, filling and crown-capping monoblock for glass bottles, built in 2016 by GAI Macchine Imbottigliatrici S.p.A. (Ceresole d'Alba, Italy) and put into production in 2018. The block combines rinsing, isobaric filling over 6 filling valves and crown capping in a single frame. It is set up for craft beer in 0.33 L, 0.5 L and 0.75 L glass bottles with crown caps in 26 mm and 29 mm. Cycle times, line speed and production counters are managed from the machine's touch panel. The machine is still installed and under power. Technical data - Manufacturer: GAI Macchine Imbottigliatrici S.p.A. (Ceresole d'Alba, Italy) - Model: MLE 661 BIER (nameplate designation MLE661 BIER 003) - Year of manufacture: 2016 (in production since 2018) - Machine type: isobarometric rinser - filler - crown capper monoblock, glass bottles - Filling valves: 6 - Capacity: up to 1,300 bph - Products: Beer and other carbonated beverages (isobarometric filling) - Bottle formats: 0.33 L / 0.5 L / 0.75 L glass - Crown caps: 26 mm and 29 mm - Control: touch panel with cycle-time, speed and production counters - Power supply: 6.38 kW Gsdpfx Aajzx Dt Notsbt - Air supply: 6 bar - Dimensions: approx. 480 x 130 x H 230 cm Equipment - Format parts for the listed bottle formats and both crown sizes - Spare parts Condition Used - in production, still installed and under power. Approx. 6,800 operating hours; in December 2025 the machine counter showed 5,982 operating hours and approx. 6.25 million bottles filled. Last maintenance December 2025. Availability From 27 November 2026. Location: Croatia. The machine can be visited in production on request.

Condition: used, Year of construction: 2014, Overview  This filling and labeling monoblock was manufactured in 2014 by the Italian company Framax. The machine was last operated in July 2025 and is still installed in the brewery but not in operation. It is immediately available for sale. Full original instruction manuals for both the filler/capper and labeler are included. Technical data - Capacity: Approx. 2,000 bph (330 ml bottles, manufacturer estimate); approx. 1,670 bph (500 ml bottles, actual use) - Formats possible: 250 ml – 1,000 ml - Formats included: 330 ml and 500 ml long neck bottles - Bottle cap type: 26 mm crown caps - Execution: - Filler/capper: Modulblock 10/1-C - Labeler: LLAC-R-SQ (VAR STEP) Gjdpfxexalibe Aatjbt - Additional features: - Hot foil stamper (added later) - CIP dummy bottles - Change parts for 330 ml format

Condition: used, Year of construction: 2022, Overview The rotary filling and capping machine manufactured by Bertolaso in 2022 is currently used for vinegar production. It features 30 filling valves and 4 capping stations and operates based on the atmospheric filling principle. The machine can be used with a wide range of shape-stable containers and is suitable for filling low-viscosity, non-carbonated liquids. Technical details:  Filler: 30 valves (Ø16 mm), model Olimpia 30/1050 Capper: 4 Pick & Place heads, model Sigma P&P 4/350 Bottles: 600 ml & 1000 ml cylindrical (range Ø55–95 mm, H160–360 mm) Caps: Pre-threaded plastic Output: 8,000 bph (600 ml) / 6,000 bph (1000 ml) Material: All product-contact parts in AISI 316 stainless steel Bowl: Electrically height-adjustable, mechanical float level control Features: - Automatic valve opening/closing - Centralized fill-level adjustment (±50 mm) - Maintenance-free lifting cylinders - Automated lubrication system - Integrated washing/CIP system - Remote teleservice via Ethernet Safety: CE compliant, transparent guards with microswitches Gbedpfxsxqz D Ae Aatot Includes: Format parts for 600 & 1000 ml bottles; adjustable star wheels (+/- Ø55-95mm)  

Condition: used, Year of construction: 2006, machine/vehicle number: TP106, Used Capping Machine AROL T stopper year 2006 Machine Description of the Capper AROL KAMMA PKV The machine is specifically designed for efficient and reliable bottling with T-stoppers in industrial settings. With its five heads, the machine precisely manages each step of the process. Consequently, it maintains closure quality consistently while operating at high production speeds. Cap Gripping System To ensure effective stability during cap positioning, the machine’s vacuum-based gripping system secures each cap, which significantly reduces the risk of errors or misalignment. Moreover, an integrated vacuum pump powers this mechanism, ensuring a firm and consistent grip on each cap throughout the process. Gedoyhbymepfx Aatebt Adjustable Capping Head One key advantage of the AROL capping machine is its adjustable-height capping head, which easily adapts to various bottle sizes. As a result, this versatility makes the machine suitable for different production formats. Therefore, it increases both efficiency and operational flexibility. Cap Distribution System An alveolar centrifugal distributor manages cap distribution, ensuring uniform and consistent delivery. Furthermore, this component minimizes the risk of jamming. Thus, it keeps the workflow continuous, which is essential for maintaining high and uninterrupted production. Safety and Materials The Used Capping Machine AROL T stopper year 2006 includes safety guards, which effectively protect operators throughout operation. Additionally, the machine’s stainless steel exterior provides strength and corrosion resistance, which are both critical for use in the food and beverage industries. Production Speed and Inverter Control Thanks to its inverter control, operators can easily adjust the machine’s speed, allowing it to meet specific production demands. Consequently, the AROL capping machine can reach a production capacity of approximately 7,000 bottles per hour. Thus, it offers an ideal combination of efficiency and flexibility to satisfy market needs. Bottle Flow Configuration With its left-to-right bottle feed (clockwise flow), the machine optimizes the production line layout. This setup, therefore, integrates smoothly into existing systems, reducing installation time. In turn, it supports continuous production and maximizes operational efficiency. Production Year of the Capper AROL KAMMA PKV Manufactured in 2006, the Used Capping Machine AROL T stopper combines reliability with proven technology. Even though it was produced years ago, the machine still upholds high-quality standards. Hence, it offers companies a reliable and versatile capping solution.

Condition: used, Year of construction: 1996, machine/vehicle number: LC635, Used STORK glass filling line for spirits 12000 BPH - shaped, taperedTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is engineered around a Stork rinser–filler–capper monoblock with vacuum filling, complemented by wet-glue front, back, and neck labeling. It is a second hand industrial packaging solution designed for efficient beverage production on round, shaped, and tapered glass containers.Line type: Complete glass bottling lineProduction speed: 200 BPM (approximately 12,000 bottles per hour)Bottle shapes: Round, shaped, taperedFormats: Compatible with 0.35L, 0.7L, 0.75L, 1.14L bottle formatsContainers: Designed for Glass bottle handlingFilling principle: Vacuum fillingLabeling: Wet glue labeller for front, back, and neck labelsElectrical supply: 415 V / 50 Hz on most equipment; select components 240 V / 50 HzKey equipment and model references:Depalletizer: Osmeka VAE (1996)Rinser-Filler-Capper Monoblock: Stork RVR30/146-36-9 LW (1996)Labeller: Cavagnino & Gatti CG84CL3/18 (wet glue)Laner: Stork SIE1500PB3 (1996)Case packer: Stork (1996)Case sealer: 3M 800 Afe (1998)Carton erector: Bortolinkemo with Nordson hot glue applicator (2013)Checkweigher: Logics & Control Logiweight LS (2016)Spiral carton elevators: AmbaFlex SpiralVeyor SV (2022 and 2013)Advanced Automation & Control SystemsThe line integrates automated bottle handling, synchronized conveying, and coordinated controls across depalletizing, rinsing, filling, capping, labeling, and end-of-line packaging. The monoblock provides precise vacuum filling for consistent fill levels on glass containers. The wet-glue labeling station applies front, back, and neck labels at line speed. Ancillary equipment such as the Nordson hot melt system on the case/carton erector and the Logiweight checkweigher support reliable, data-driven quality and packaging integrity. Electrical configurations are standardized at 415 V / 50 Hz for heavy equipment and 240 V / 50 Hz for the checkweigher.Production Line Integration CapabilitiesDesigned for seamless inline operation, this used bottling line includes a laner for flow management and spiral carton elevators for vertical transport, optimizing footprint and maintaining throughput. Format changeovers cover 0.35L to 1.14L glass bottles, handling round, shaped, and tapered geometries. The system integrates upstream depalletizing through to case erecting, packing, sealing, and weight inspection, providing end-to-end industrial packaging capability for beverage production.Machine Condition & Maintenance HistoryThis second hand bottling equipment set comprises components manufactured between 1996 and 2022, reflecting a maintained and progressively updated line. It is presented as a complete used bottling line suitable for recommissioning into beverage production. Component ages vary, with the core Stork monoblock originating in 1996 and end-of-line elements ... Gsdpfx Ajy Szb Hjatjbt

Condition: used, Year of construction: 2017, Overview The ALWID-SUPERIOR-16D/4SK filling machine was built in 2017 by the German manufacturer ALWID. The machine was used by a Company producing sauces in Germany. After bankruptcy, BEVMAQ took over the machine and stored it. The filler is a piston filler that can fill volumes of 0.1-1.0 l into containers made of plastic or glass. The volume to be filled can be easily adjusted. The cap is pressed on. An extension to a screw capper is possible. In addition to sauces, the machine can also be used for dressing, spirits or mayonnaise. The below-surface filling can also be used to fill products that tend to foam. Technical Details - Capacity: 6,000 bottles per hour with 250ml bottle volume A test showed that mayonnaise can still be filled to 500ml at 6,000 bottles per hour Gbsdewwq Sfepfx Aatot - Working Direction: Left - Right - Number of filling stations: 16 - Number of closing elements: 4 - Siemens control - Below surface filling - Lowering and raising the filling pipe during the filling process Scope of delivery: - Filler - Capper - Cap sorting unit - Cap alimentation

Condition: used, Year of construction: 2003, machine/vehicle number: M321, Used Acma rotary trigger filling monoblockTechnical Specifications & Performance Data2003 Acma RC15/6-200 with 15-valve rotary filler (gravity/light depression) and 8-head capping turret for 28 mm plastic screw closures. Rated speed 5000 Bottles/hour. Configured for detergents in glass or PET containers across 500 ml, 650 ml, 750 ml, 1 L formats. This used rotary filling machine provides compact, synchronized filling and capping on a single carousel.Manufacturer: AcmaModel: RC15/6-200Year of manufacture: 2003Machine concept: Rotary filling monoblock with integrated capper and cap sorterCategory: Filling MonoblockSpeed: 5000 Bottles/hourProduct types: DetergentsContainer types: Glass, PETFormats: 500 ml, 650 ml, 750 ml, 1 LFiller: 15 mobile nozzles; gravity/light depressionCapper: 8 heads; cap size 28 mm; neck 28 mm; cap type: plastic screwCompliance: CE markedAdvanced Automation & Control SystemsThe RC15/6-200 couples a synchronized rotary filler and capper with automatic cap sorting/feeding. Format parts enable rapid changeover between 0.5 L to 1.0 L. Operator controls coordinate turret timing and capping torque for stable throughput. This monoblock filling machine minimizes handling steps while maintaining fill accuracy and closure quality.Synchronized rotary filler/capper with integrated cap sorterQuick-change format parts for multiple bottle sizesControlled torque application and repeatable fill accuracyCE-compliant guarding and safety logicProduction Line Integration CapabilitiesDesigned for inline placement with upstream bottle handling and downstream equipment. Interfaces cleanly with infeed/outfeed conveyors, labeling, and case packing. For trigger applications, the capping stream can be paired with a downstream trigger capper when required.Inline operation with upstream and downstream conveyorsCompatible with screw-closure ecosystems and downstream trigger cappersFormat scope: 0.5 L, 0.65 L, 0.75 L, 1.0 LSuitable for integration in existing or new linesMachine Condition & Maintenance HistoryOffered in ready for operation condition. This used rotary filling machine is presented as operational equipment; standard integration and commissioning procedures are recommended. Original CE marking is present.Operational second-hand equipmentReady-for-operation conditionOriginal CE markingOperational Performance & VersatilityConfigured for 28 mm plastic screw closures on 28 mm necks. Smooth rotary handling supports consistent output across 500 ml to 1 L. The monoblock filler maintains stable cycles for detergent products in glass or PET.Consistent gravity/lig... Gedpfeymdpzjx Aatobt

Condition: used, Year of construction: 2003, Overview  Godozqvcyepfx Aatobt The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003      Preforms feeder      Preforms tipper      Transporters | AVE | 2004      Injection and blowing | Nissei ASB | PF4-1BH |2000      Dryer Moretto | 2000   Loader Moretto | 2000   Heater Moretto | 2000   Transporters | AVE | 2004      Lot Coder | Marken | Smartlase 110i | 2009      Rinser - Filler - Capper | GyM | Tribloc 9-12-3| 2012      Labeller|Auxiemba | Basic 720-6-HM-iz  | 2010 | 7000 bph Shrink Packer | SMI | ST-2000 | 2009 | 30 packs / min Handle applicator | SMI HA 25Sx | 2012 | 25 packs /min Palletizer | Lapeyra | RP1C | 1992 (retrofit as CE RD1215) Wrapping|Impropak | Girospak 747 SBP | 1990 (retrofit as CE RD1215) Transporters | AVE | 2000     

Year of construction: 2017, condition: used, Manufacturer : Transvis Gsdpfx Ajy H Rfqjatebt Type: Semi-automatic cap screwdriver Application: screwing / capping Year: 2017 Maximum product dimensions: Ø 54.5 x 82 mm Minimum product dimensions: Ø 45.5 x 68 mm Product weight: 90–150 g HMI control panel Asynchronous motor power: 0.18 kW Two-hand control Torque control Overall dimensions: 650 x 1000 x 1800 Screw capper dimensions: 650 x 935 x 990 Weight : 100 kg Spare parts and formats available Power supply: 220V single-phase / 6 bar compressed air Technical documentation available Video available in running condition