Krones Kosme, Gera, BMS Line for Returnable Glass Bottles (2012)

Krones Abfülllinie für Glasflaschen (Mehrweg)

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: 0.25 L Individual bottle – Ø 57.5 × 215 mm 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm 0.33 L Ale bottle – Ø 68.5 × 234.5 mm 0.5 L Ale bottle – Ø 68.5 × 270 mm 0.5 L Steinie bottle – Ø 70.5 × 174 mm 0.5 L Bavaria bottle – Ø 70 × 260 mm 0.5 L NRW bottle – Ø 67 × 260 mm 0.5 L Individual bottle – Ø 82 × 295 mm 0.7 L GDB bottle – Ø 79 × 290 mm 0.75 L GDB bottle – Ø 79 × 290 mm 1.0 L GDB bottle (light) – Ø 84 × 305 mm 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: 5 × 4 – 400 × 300 × 300 mm 6 × 4 – 400 × 300 × 270 mm 5 × 4 – 400 × 300 × 210 mm 4 × 3 – 355 × 275 × 345 mm 4 × 3 – 400 × 300 × 330 mm 5 × 4 – 355 × 275 × 255 mm 5 × 4 – 400 × 300 × 290 mm Lrsdpoytvyfefx Akfsk

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Fully functional and well maintained Complete with control cabinet, fences and hydraulic unit, valves etc. Ljdpew Adkfefx Akfork Various fruits such as apples, pears, grapes, berries, raspberries, strawberries, quinces, pectin, carrots and other fruit and vegetable can be processed on this press. Prompt delivery.

Condition: used, Year of construction: 2007, Overview  The offered filling line for returnable glass bottles is composed of a selection of high-quality machines, chosen by BEVMAQ. Most of the machines were previously used in breweries in Germany. The condition of the machines is good, as they have been regularly maintained and continuously serviced. Apart from some of the machines, the majority has been dismantled by a German partner company and are now stored in a warehouse. The line layout can be adapted to the customer's needs and his plant layout, as the conveyors will be new or refurbished. Tech Specs  Capacity: 40,000 bph at 0.5 l bottles Suitable: Carbonated water and soft drinks Beer / Beer Mix recently serviced, regularly maintained Formats processed: 330 ml  500 ml YOM: ranging from 2007 to 2016 The Line in Detail Crate Depalletizer | Krones | Pressant Duplex | 2011 Includes safety fences, conveyors, offloading table Decrater | Krones | Linapac II | 2012 Machine can work as crater and decrater Bottle Washer | Krones | Lavatec | 2013 Crate Washer | Klotzki | 2011 Empty Bottle Inspector | Miho | David 2 | 2016 Counter Pressure Filler + Capper | KHS | Innofill DRS | 2013 Fill Level Inspection | KHS | 2013 Includes bottle rejection system and conveyor belt Tunnel Pasteurizer | Krones | Linaflex | 2013 Cold Glue Labeller | Krones | Topmodul | 2015 Includes a module prepared to work with seal label With servo driven bottle orientation Crater | Krones | Smartpack | 2011 Crater Palletizer | Transpak | NEW Bornbinder | Born| - | NEW Mixer | Famix | 30,000 - 2K | 2008 Flash Pasteurizer | GEA | 25,000 | 2007 All pallet, crate or bottle conveyors will be individually adapted to the plant design, manufactured in KHS/Krones standard. Necessary format parts for bottle, label, crate and cap handling can be supplied. Ljdoxf D Dbepfx Akfork

Condition: used, Year of construction: 2012, Overview  This complete filling line for returnable glass bottles was manufactured in 2012 by leading European producers Krones, Sidel, and Kettner. The line is designed for high-capacity beverage production, handling up to 42,000 bottles per hour in 0.33 L contour bottle format. It includes all necessary components from depalletizing to final palletizing and labelling, making it a complete turnkey system for bottling operations. The line underwent annual maintenance in August 2025 and was stopped on September 1st, 2025. It remains installed and connected, and can be inspected upon request. Technical data  Capacity: 42,000 bph Formats: 0.33 L contour bottle Application: Beer, CSD, or other beverages in returnable glass bottles Line length: Approx. 103 × 29 m Condition: Excellent; maintained until shutdown (September 2025) Availability: Immediate Status: Still installed and connected Scope of Delivery  Depalletizer | Kettner | 60 pallets/hour | 1992 | Automatic, glass bottles Decrater | Kettner | 2,500 crates/hour | 1992 | For returnable crates Crate washer | Seroba | 2,500 crates/hour | 1992 | Stainless steel, single bath Bottle washer | Krones | 47,200 bottles/h | 2010 | Multi-zone cleaning Empty bottle inspection | Heuft | 46,000 bottles/h | 2012 | Camera system Filler | Krones | 42,300 bottles/h | 2012 | Glass bottles, return operation Labeller | Krones | Topmatic | 2012 | 2 stations (body & back), pitch 125mm + Checkmat Fill level & closure inspection | Heuft | 43,000 bottles/hour | 2012 | Sensor & camera system CIP & mixer station | KHS | 16,500 liters/hour | 2011 | Integrated, fully automatic Printer | Videojet | 43,000 bottles/hour | 2012 | Inkjet printer Packing machine (Crater) | Kettner | 2,200 crates/hour | 1992 | Automatic Palletizer | Kettner | 50 pallets/hour | 1992 | Automatic Pallet wrapper | Robopac | 50 pallets/hour | 1992 | With stretch film Pallet labeler | Logopak | 60 pallets/hour | 2014 | Labeling of pallets Bottle conveyor belts | Sidel Gebo | – | 2012 | Stainless steel conveyor technology Lredpfx Akjxrcv Njfjk

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Lrjdpjw Uf Ihofx Akfok Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: ready for operation (used), Year of construction: 2019, Complete cup filling and sealing machine (year of manufacture 2019) with inkjet encoding, conveyor belt extension and dosing bar (incl. perlator inserts, year of manufacture 2020) used in the cheese industry. Filling temperature: Cold filling, round plastic bucket/plastic bucket/plastic bucket 2: Diameter 175mm x height 131mm/diameter 104mm x height 55mm or 65mm/diameter 227mm x height 194mm. Dimensions X/Y/Z and weight, without outfeed conveyor belt and shifting shank: 2200mm/2200mm/3200mm and approx. 3500kg. Lrodpfx Asr Dd H Sskfek

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Lrsdpju Nhiqjfx Akfjk Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Lredpfjw D E Ubox Akfek Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Condition: good (used), Item: AJ-Hamba BK6005/5 Filling machine for cups HAMBA BK 6005/5 cup filling and sealing machine Made in Germany In good used condition. The machine can be used for filling yogurt and similar products in cups. Capacity: 8000 - 10000 cups/ h Lanes: 5-Lanes longitudinal machine Actual Cup-size: Ø 75 mm Height: 90 mm Main Filler: - manufacturer: Hamba - filling range: 100 cm³ to 250 cm³; - cleaning: CIP-able Closure: Sealing Date Device: Stamp Measurements (lxwxh): 4,3 m x 1,3 m x 2,2 m Power: 380 V; 21 A; 8 KW Lrodpei Atkqofx Akfok

Condition: used, Year of construction: 2017, Overview This complete filling line for beverage cans was manufactured 2017 by the german manufacturer KHS.  The line is designed for beverage production, handling up to 40,000 b/h and is in a good condition.    Technical Data Capacity: 40,000 bph  Filling product: carbonated soft drinks and beer Bottle Formats: 500ml 211/202 Cap Formats: 211/202 Packaging formats: tray with foil Application: CSD + beer condition: good technical condition, dismantled   Scope of Delivery Bulk can depalletizer | LINKER | DPG-500 | 2012 Can inspection | TransTech | Hysek CanCheck | 2012 Can conveyor | LINKER / KHS | Conveyor RC | 2012 Rinser | LINKER / KHS | Triplex Rinser TR | 2012 Flash pasteurizer | KHS | Innopro 140/14/85 | 2012 Filler | KHS | Innofill Can DVD | 2017 Seamer | Ferrum | F08 | 2012 Lid feeder | NSM | Lidserver A30 | 2017 Conveyor | KHS | Innoline BTR | 2012 Filling height control | KHS | Innocheck CUB | 2012 Blowing | Europool | – Packing machine | KHS Kisters | SP0502 | 2012 Pack conveyor | KHS | Innoline GTR | 2012 Handle application | KHS | CSM 050-2 | 2012 Packing machine | KHS | Innopack 035 B2 + FS A-L | 2012 / 2017 Palletizer | KHS | Innopal PBL1N1 | 2012 Stretcher | SIAT | MFP | 2017 Pallet conveyor | KHS | Innoline PTR Lrodpfxoyb R Sro Akfsk