Used Car Shredders for sale (9,626)

Condition: used, Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Technical data: Isdpfx Acjzt Intsastk Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of manufacture: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Note: The machine is in good working order. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Inspections are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, prior sale is reserved, and they can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without warranty.

Condition: like new (used), Year of construction: 2026, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Iodpfjdwktkjx Acajtk Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: used, Double-shaft shredder Itodpfx Acoztmxwoaek Drive 37.50 KW

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: diesel, color: red, empty load weight: 1,300 kg, brakes: other, driver cabin: other, gearing type: other, suspension: other, Year of construction: 2026, Equipment: low noise, TICAB TI-CAR 225 | Compact Wheel Loader for Agriculture, Municipal & Utility Works Previous price: €27,460 Special price: €22,460 The TICAB TI-CAR 225 is a versatile compact wheel loader designed for demanding work in agriculture, municipal services, construction, landscaping, and utility maintenance. Itjdpjx Uqplefx Acajk Thanks to its compact design and articulated steering system, the TI-CAR 225 operates efficiently in narrow and confined spaces such as urban streets, sidewalks, farmyards, warehouses, and industrial facilities. Combining power, maneuverability, and efficiency, it serves as a reliable alternative to traditional skid steer loaders while offering lower fuel consumption and simplified operation. Key Advantages ✔ Multi-purpose compact loader for year-round operation ✔ Compatible with a wide range of attachments: Bucket Pallet forks Snow blade Sweeper Auger And other hydraulic tools ✔ High maneuverability with articulated frame design ✔ Compact dimensions for operation in tight and urban environments ✔ Low fuel consumption with high operational efficiency ✔ Easy and intuitive control system for operators of all experience levels ✔ Durable construction designed for heavy-duty daily use Ideal Applications • Agriculture and farming operations • Municipal maintenance and utility services • Landscaping and green area management • Snow removal and winter road maintenance • Material handling in warehouses and industrial sites • Construction and light earthmoving works • Yard, sidewalk, and urban infrastructure maintenance Built for Productivity and Versatility The TICAB TI-CAR 225 is engineered to maximize productivity in diverse working environments. Its compatibility with multiple attachments allows one machine to perform a wide range of tasks, reducing equipment costs and increasing operational efficiency for contractors and municipal fleets. Why Choose TICAB TI-CAR 225? • Compact size with professional-grade performance • High versatility with multiple attachment options • Fuel-efficient and cost-effective operation • Strong, durable design for long-term use • Perfect solution for urban and agricultural applications Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB TI-CAR 225 is available for fast production and worldwide shipping.

Condition: like new (used), Year of construction: 2020, operating hours: 40 h, functionality: fully functional, machine/vehicle number: KS 1000/2, total length: 1,385 mm, total width: 2,365 mm, total height: 435 mm, overall weight: 2,500 kg, torque: 7,269 Nm, power: 30 kW (40.79 HP), type of input current: three-phase, We offer this as new KAINZ KS 1000/2 two shaft shredder, only 40 operating hours, year of construction 2020. Iodpfx Acjzt I Nksaotk Manufacturer: KAINZ Model: KS 1000/2 Year of manufacture: 2020 Operating hours: 40 h If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Catalog number: 8012 TECHNICAL DATA Iedpezp Na Aofx Acastk - inlet width: 420mm - inlet height: 270mm - shaft width: 410mm - shaft diameter: 450mm - number of knives: 2 rows of 7 pieces each - screen dimensions: 50x70mm - toothed pull shaft (bottom) - lower shaft motor: 1.1kW - toothed pull shaft (top) - upper shaft motor: 1.1kW - main motor: 45kW - feed direction: forward/backward - auto-reverse - additional screen: 10x10mm - diameter of the extraction outlet: 330mm - vibrating screen: 1.1kW, 3300x400mm - overall dimensions of the vibrating screen: 3340x630x620mm - machine dimensions (length/width/height): 2310x1040x1000mm - weight: approximately 1800kg ADVANTAGES – German-made – auto-reverse (with adjustable settings) – with 3300mm vibrating screen – DTR documentation – used shredder, good condition Net price: 66900 PLN Net price: 15929 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C Itodpfx Acszhub Ajask - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Year of construction: 2021, condition: used, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations Itjdpfxjzc N Axe Acajk 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Condition: used, Year of construction: 1990, functionality: fully functional, The used shredder, manufactured in 1990, is located near Vienna. It is fully functional and can be dismantled and collected by the buyer. - Discharge conveyor - Overband magnet - Niro discharge conveyor - 50kW motor - More than 200 spare blades for the shredder - Various screens included Iedpfxjzp Hvus Acaotk

Year of construction: 2021, condition: used, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system 3x semi‑automated material infeed for rotors (high and low versions) 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Ijdpfx Acezc N H Dsastk Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) 3x Hoffmann ESV25‑AR2 spinning stations (2022) 4x cooling tracks Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Ijdpfx Asyr Tx Ajcaotk Rotor width: 1400 mm Rotor knives: 76 / 114 Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Condition: new, machine/vehicle number: ZWS 600 SMART, The ZWS 600 SMART serves as a complement to the ZWS series. The series was designed as an economical solution, specifically for the shredding of wood residues in small and medium-sized woodworking companies. AT A GLANCE: Compact design Sturdy welded steel construction Large-volume hopper for material feed Solid steel rotor with bolted knife holders PLC control for fully automatic operation Technical data SMART 600: Infeed 600 x 840 mm Motor 11 / 15 kW Rotor diameter 250 mm Rotor speed 80 – 120 13 rotor knives Technical data SMART 600 S: Infeed 600 x 840 mm Motor 18.5 / 22 / 30 kW Rotor diameter 250 mm Rotor speed 80 – 120 Itedpoyr I Ifjfx Acajk 26 rotor knives

Condition: new, machine/vehicle number: 12007, Technical data: Itodpsyr Tpusfx Acask Cutting area: 700 x 1300 mm Number of cutting discs: 18 Cutting disc width: 65 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2900 kg

Condition: new, Dimensions with base frame: approx. 1500 mm x 1400 mm Feed speed: 27 m/min Rotor blades: 2 Ijdpfeyr Tu Rsx Acajtk Stator blades: 1 Infeed cross-section: approx. 10 x 40 mm Drive motor: 1.5 kW Weight with base frame = approx. 270 kg

Condition: used, machine/vehicle number: 14130, Rotor diameter: approx. 280 mm Iodpfx Acjzrqpwjastk Rotor width: 500 mm Number of rotor blades: 16 Inlet cross-section: approx. 480 x 500 mm Drive motor: 15 kW

Condition: used, machine/vehicle number: 11403, Rotor blades: 2 x 7 stars Rotor width: 1200 mm Rotor diameter: 350 mm Inlet: 850 x 1200 Power: 30 kW Isdpfx Ajyx Nlyocajtk

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working cross section: 800 x 820 mm ZHS 1100 - 37 kW Rotor diameter: 400 mm Working cross section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working cross section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working cross section: 1,640 x 1,550 mm Isdpfxjyr I Ire Acaotk ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 1,920 x 1,550 mm ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 2,480 x 1,550 mm ZHS – economical all-rounders The ZHS series features a load-dependent, hydraulically actuated pusher that feeds material horizontally to the rotor in a slightly inclined position. The material is cut between the rotor and stator blades until it passes through the screen, which is bolted and mounted underneath the rotor. The interchangeable screen determines the final particle size. The shredded material can be discharged via conveyor belt, discharge screw, or pneumatically using an extraction system. The ZHS single-shaft shredders are designed for light to medium-duty applications in the plastics industry. Technical details: • Roller-mounted hydraulic pusher with horizontal movement • Bolted knives and knife holders • Optional segmented floor for particularly thin parts and materials • Rotor aggressiveness can be reduced or increased by bolting in filling pieces • Can be integrated in a two-stage system with a granulator as a pre-shredder

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Special features Iodpfjyr Tlpox Acastk The change of wear plates and scrapers does not require disassembly of the machine housing. Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Technical Data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Options The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Various drive power ratings Different gearbox sizes with variable speeds

Condition: new, The cost-effective single-shaft shredders of the ZWS series enable the realization of a wide range of size reduction tasks, such as a preliminary stage for subsequent briquetting, the production of wood chips for combustion, or re-introduction into the particleboard industry. Depending on throughput and material, the machines can be customized to meet specific requirements. Typical material for shredding includes: - Large panel and board offcuts - Wooden pallets - Waste from joinery workshops - Packaging wood - Construction and demolition timber - Veneers, MDF, and particleboard Itjdpfsyr I Ilox Acask

Condition: used, machine/vehicle number: 13299, Rotor diameter: 750 mm Rotor width: 1500 mm Number of rotor blades: 76 Stator blades: 1 row Inlet cross-section: approx. 1500 x 1500 mm Iodpfx Ajyr Twrocajtk Drive motor: 2 x 75 kW

Condition: new, ZERMA single-shaft shredders of the ZPS series offer versatile applications. They are suitable for the size reduction of heavy and bulky parts that cannot be directly granulated by a granulator. The large and heavy rotor of the ZPS shredder series, combined with the low rotor speed and high torque, ensures low power peaks, thereby avoiding high energy costs. Iodoyr I Ixepfx Acaetk Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the specific requirements, the shredded material can be used directly in the processing operation or can be further granulated in a downstream granulator. The shredders of the ZPS series are equipped with a two-stage hydraulic system that prevents rotor blockage. The knives and knife holders are completely bolted to the rotor. Generously sized, externally mounted rotor bearings and a hydraulically tiltable screen basket come as standard on every shredder. The machines can be equipped or upgraded with numerous options, such as rotor cooling or Hardox wear protection. Compared to ZSS shredders, the machines of the ZPS series are equipped with a higher pressure unit, which optimizes the feed between pusher and rotor, especially for large-volume parts or pipes.

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specifically developed for shredding pipes with diameters of up to 1,300 mm, made from various materials such as PE, PP, and PVC. These machines can shred plastic pipes up to 9 meters in length directly, without the need for prior cutting or sawing. The core components are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low rotational speeds. Itjdpfxsyr Tg Hs Acaek The pipe is loaded into an enclosed feed trough, where a hydraulic pusher presses it against the rotor. The pre-shredded material is then conveyed via a belt to a granulator, which processes it into granulate suitable for immediate use. The entire system is operated automatically via a central control unit. Additional advantages of the system include low energy consumption, the avoidance of power peaks, and reduced risk of accidents during pre-shredding.

Condition: used, machine/vehicle number: 10657, Rotor diameter: approx. 368 mm Rotor width: approx. 1270 mm Itsdpsznpc Uefx Acaok Number of rotor blades: approx. 60 Stator blades: one row Drive motor: 37 kW

Condition: new, GENERAL INFORMATION The ZIS series single-shaft shredders are characterized by their spacious cutting chambers, which owe their stability to a robust steel-welded construction. The rotor diameter is generously dimensioned at 457 mm. Rotor widths are available in 1200, 1500, and 2000 mm. The ZIS series retains all benefits of the ZSS series: drive via an oversized gearbox, reversible blades, bolted blade holders, durable externally mounted bearings, hydraulic screen cradle, easy handling, and technically advanced control systems. Iodpfxjyr I I Ss Acajtk APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies such as IBCs, waste bins, pallets, rain barrels, etc. Additionally, the machine can be universally used for countless applications in the plastics and wood industries. Like all Zerma shredders, machines of the ZIS series can also be equipped with various wear protection options. ADVANTAGES 35% larger cutting chamber volume compared to the ZSS series Internally positioned hydraulic ram Increased ram speed in the return stroke Compact dimensions Blade holders bolted into rotor pockets

Condition: new, The Zerma ZCS shredder combines leading shredder and granulator technology in a single, compact unit. By developing the combination of shredder and granulator, ZERMA has successfully expanded its product portfolio. Through the interplay of the proven design and high torque of the single-shaft shredder with a highly efficient granulator, ZERMA is able to deliver a reliable and compact pre-shredding system. The shredder and granulator are driven separately, providing better process control throughout. To further improve efficiency, the ZERMA Smart Drive System is used to constantly monitor the load and adjust the current accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where consistent quality in shredding and granulating is required. Isdpfsyr Tg Tsx Acajtk Typical applications include, but are not limited to, the following: Injection molding Thermoforming Blow molding Recycling Extrusion Waste