Used Carbide Inserts for sale (2,408)

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Bdsdpfxj Aflwys Agkei

Year of construction: 2026, condition: new, functionality: fully functional, Double head sawing machine with 5 controlled axes for compound angles FOM INDUSTRIE KEOPE E5 6,6m Year: 2026 Condition: new (showroom machine) Standard configuration: ▪   No. 2 carbide tungsten saw blades Ø 600 mm ▪   Integral safety casing for cutting area protection ▪   No. 4 vertical vices ▪   2 Retractable pneumatic intermediate supports ▪   Loading roller conveyor 400 (Useful length 2,2 m) on mobile head ▪   Minimum quantity lubrication (MQL) with pure oil ▪   Greasing gun ▪   Set up for the extraction of chips and fumes ▪   15' touch screen control panel (IP65) on linear guides ▪   PC operator interface ▪   Operating system Windows ® ▪   Real time numerical control ▪   FSTCUT4 software licence ▪   Software management of cutting in minimum and super-minimum mode for special lengths ▪   Software management of cutting in oversize mode for special lengths ▪   Software management of cutting in trimming mode for cut ends with variable angles Bdodpfoztr Rrex Agkoi ▪   Teleservice for the first 12 months Optional equipment installed on the machine: ▪ PR-29060 Profile lifting kit ▪ PR208207 Third intermediate pneumatic retractable support ▪ PR206695 Chip conveyor belt ▪ PR203359 Label printer ▪ PR203356 Licence for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no. 2), 90° cuts, two-hand control ▪ IV33160 Vacuum cleaner for extraction of chips and fumes

Condition: good (used), Year of construction: 1986, Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm -Projection: 255 mm Bjdei Agynepfx Agksdi -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg

Year of construction: 1987, condition: good (used), With a blister! Product: RUEZ Type: SFWW2 / 306DAU Year of production: 1987 Metal chain width: 200 mm Distance guide lanes: approx. 300 mm Bsdpfogxqfcex Agksdi Chip outlet length 700/1300 mm Insertion length: approx. 1000 mm Insertion height 260 mm Total length: 3000 mm Transport height - ejection height: 800 mm Belt speed 26 mm / sec. = 1.6 m / min Engine power: 0.25 kW Mains connection was 400, 50 Hz Enclosure size: H x W x D; 1900 x 900 x 1300 mm Weight 300 kg Set of 2 pcs.

Condition: new, Bernardo Horizontal Bandsaw HBS 275 PRO Technical Specifications Cutting capacity, round, 90°: 225 mm Cutting capacity, square, 90°: 200 x 200 mm Cutting capacity, rectangular, 90°: 245 x 150 mm Cutting capacity, round, 45°: 160 mm Cutting capacity, square, 45°: 160 x 160 mm Cutting capacity, round, 60°: 100 mm Cutting capacity, square, 60°: 100 x 100 mm Working height: 910 mm Saw band dimensions: 2480 x 27 x 0.9 mm Cutting speed: 45 / 90 m/min Coolant pump: 100 W Motor output, S1 100%: 1.1 kW Motor input, S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight, approx.: 180 kg Scope of delivery: • Saw band • Workpiece stop • Base frame • Manometer for band tension Bdedpfx Agsfigzzjkei • Saw band guide with carbide inserts • Vise with quick-release mechanism • Coolant system • Hydraulic lowering cylinder • Motor circuit breaker • Automatic shut-off at the end of the cut

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm Bodeqwlmqspfx Agkjdi machine weight: 3550 kg

Year of construction: 2002, condition: excellent (used), Hinge width 300 mm Slide-in width - / height 390 x 100 mm Insertion length 4615 mm Height from floor to lower edge of chip ejector 700 mm Hinge drive 0.37 kW Transport dimensions L x W x H approx. 5965 x 750 x 1010 mm (height without feet!) Weight approx. 500 kg Foot height adjustable yes This hinged chip conveyor manufacturer TEKNICALDE model TC 1 ½ 300 was used on a CNC bed milling machine MTE Kompakt. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Bedpfsmdqx Hex Agkodi

Condition: used, Year of construction: 2000, Horizon AFC-504 AKT Automatic Combination Folder, Used The Horizon AFC-504 AKT is a proven and robust automatic combination folder, specially designed for efficient processing of brochures, inserts, and other folding jobs. Key Features: - Sturdy construction for reliable and long-lasting performance Bdsdpfew Eu Rbsx Agkei - Flexibility to handle various folding types and paper formats - Easy operation for quick setup times - Suitable for medium to large production volumes Technical Specifications: - Max. sheet size: 490 x 650 mm - Min. sheet size: 120 x 172 mm - Paper weight: 40 to 250 g/m² - Stack height: up to 650 mm - Production speed: up to 27,000 cycles/hour - Power supply: 400 V, 50 Hz, 2.5 kW - Dimensions (L x W x H): 2,540 x 1,790 x 1,440 mm - Weight: approx. 870 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), lifting height: 10,020 mm, fuel type: electric, General information Year of manufacture: 2016 Weights Empty weight: 3.080 kg Functional Lifting capacity: 300 kg Working height: 1.202 cm Dimensions of cargo space: 253 x 90 x 148 cm CE mark: yes Condition Bdodpeywyptofx Agksi Technical condition: good Visual appearance: good Other information Delivery terms: EXW Production country: IT Additional information Please contact Christian Theißen for more information Manufacturer: Imer Model: IT10090 Year of build: 2016 Condition: Used Data: Max. working height: 12,02 m Movable up to working height: 12,02 m Max. platform height: 10,02 m Drive type: Battery Platform dimensions LxW: 2,26 x 0,87 m Platform length pushed out: 3,65 m Lifting capacity: 300 kg Total dimensions LxWxH: 2,53 x 0,90 x 2,40 m Transport dimensions LxWxH: 2,53 x 0,90 x 1,48 m Gradeability: 25 % Ground clearance: 0,08 m Empty weight: 3.080 kg Special features: white tires, inner insert only, longitudinal tilt (front/rear) 3°, lateral 1.5°, anchor points for restraint systems (PPE) EN795 available.

Condition: excellent (used), Year of construction: 2007, Mori Seiki NL2500Y/700 CNC lathe Year: 2007 Control: MORI MSX-850 III Main spindle: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4000 rpm Max. spindle bore: 80 mm Max. turning diameter: 366 mm C-axis 0.001 degree Bjdpfx Ageyxppreksdi TURRET: Number of positions: 12 pcs. Number of driven tools positions: 12 pcs. Min. spindle indexing increment 0.001° Travel X/Z axis: 280 / 785 mm Travel Y axis: +/- 50 mm Max. speed driven tools: 6000 rpm Power driven tools: 5.5 kW TAILSTOCK: Taper: MT5 Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3800 x 2143 mm Machine height: 2232 mm Machine weight: 6100 kg Accessories/options: - 2 cabinet accessories - 5 pieces driven tool holders, several static holders - collets, inserts, tools, sleeves, etc.... - high pressure paper band filter type, micro filtered, coolant tank - swarf conveyor - collet type chucks, different sizes - Kitagawa 3-jaw hydraulic chuck diameter 210 mm - Full set of documentations - Parts catcher Under power in our warehouse. Video available upon request!

Condition: like new (used), Year of construction: 1996, functionality: fully functional, Groninger DFVK 4000 - KVK 106 B High-performance filling and closing system for vials - unused, as good as new This powerful filling, stopper inserting and flanging machine has never been put into operation and is in as good as new condition. It is ideal for the precise filling and secure closing of vials with an output of up to 12,500 objects per hour, depending on the medium and dosage. Bsdpfx Ajvyic Aogksdi Technical specifications Filling quantity: up to 100 ml Object size: max. Ø 52 mm / height 180 mm Stopper size: max. Ø 32 mm Cap size: max. Ø 36 mm Format sets for vials: 2R, 6R/8R, 10R, 25R, 50H, 100H Includes: stainless steel dosing pumps, rubber stoppers & aluminum cap formats (Ø 13 mm & 20 mm) Filling and closing process sequence Feeding & filling: Vials are separated on a rotary table (Ø 80 cm), transported and filled with piston pumps using below-level filling. Pre- and post-gassing possible. Stopper insert: 4-lane sorting machine with vibrating chutes ensures precise positioning and pressing in of the stoppers (pick-up process). Flanging: Flip-off caps are fed in and securely closed with 6-position flanging rollers (individually adjustable contact pressure). Output: Vials are processed directly or prepared for freeze-drying. Special features Robust stainless steel construction with safety cover User-friendly: Control via Siemens S5 control cabinet Including English machine and operating manual Technical data Manufacturer: Groninger, Crailsheim Year of construction: 1996 Machine no.: 4005 / 4008 Electrical supply: 220/380V, 3 phases, 50 Hz Dimensions: Machine 450 x 260 x 265 cm, control cabinet 120 x 60 x 215 cm Weight: approx. 1,400 kg This unused, high-quality filling and closing system is ideal for pharmaceutical, biotechnological or cosmetic companies that want to expand their production capacity. Attention: Vial washer and Steri Tunnel not available. Contact us for more information or a customized offer.

Condition: excellent (used), Carbide saw double side grinder VOLLMER model Fini-Duo Bedpev Ef Tbjfx Agksdi

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port * Ready for network connection - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake effective even without mains power - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V - CE Declaration of Conformity - Frequency 50 Hz Bdjdpfxsx Nbzue Agkei - Base - MACHINE LANGUAGE: German - Standard safety regulations - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - Milling spindle diameter 30 mm Availability: short-term

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, travel distance Z-axis: 300 mm, space requirement width: 1,550 mm, space requirement height: 2,050 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) Bsdpfoxd Az Nox Agkodi with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: used, Technical details: voltage: 380 V / Hz weight: ca. 0,43 t dimensions L x W x H: 1,1 x 0,8 x 1,7 m Stationary welded steel construction Type 80 mm steel profile Application: Separation of mineral materials (sand) according to grain size Bdsdpfx Asu Tr T Eegksi operation by vibration 3x attachments Ø 610mm 1x separation pipe Ø 100mm attachment feeding screen Ø 580mm grain size 2mm Additional Separator attachment 5.5mm; 4.0mm and 3.5mm sieve inserts are optionally available for 150.00 Euro per sieve. *

Condition: used, Year of construction: 2013, Technical details: Bdjdpfeu Nupdox Agkji band width: 600 mm voltage: 460 / 60 V / Hz total power requirement: 3,5 kW weight of the machine approx.: 2300 kg dimension machine xH: ca. 9,0 x 1,4 x 3,0 m hinged type chip conveyor, as good as new With coolant tank incl. pump (submersible centrifugal pump) Delivery rate 250 l/min. = sufficient for a conveying height of 25m Chip insertion length (A) 3000mm (attachment with sheet metal tray with rubber coating 3000 x 1100mm) Total insertion length 5000mm Belt width (H) 600mm Discharge height (C) above floor 1800mm The chip conveyor has 4x swivel wheels underneath and can be fixed to the floor with bolts. *

Condition: used, Technical details: band width: F1 = 350 mm conveying height: C = 1200 mm weight of the machine approx.: 1050 kg dimension machine xH: ca. G 5,25 x 1,2 x 1,6 m total power requirement: 2,5 kW Belt conveyor hinged type This chip conveyor can be repositioned using the 3x swivel wheels. It is fixed to the floor with the 4x adjusting screws. Chip inlet: open (not covered) L: 880 x W: 500mm; total inlet approx. 2000mm x 480mm (incl. cover) Insertion data: A 2,500 x F 530 x W 350mm Cooling water tank 600 x1200 x 200mm with pump and two measuring sensors Very good, in rarely used condition. * Bdodpju Nuqhjfx Agkei

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts Bdodpfou Ridlox Agkei -Type: Secodex R220.13-8160-C -Hole diameter: 50 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 173 x 60 mm -Weight: 5.3 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R220.13/23-8315-C -Recording: SK50 -Dimensions: Ø 330 x 260 mm -Weight: 36 kg Bsdpfxou Ridxo Agksdi

Condition: used, functionality: fully functional, Year of construction: 2025, SCHORR Trencher RR600GF, 12.4 HP, 420cc Electric Start, Shaft Cutter Powerful shredder in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 22 hours Year of manufacture: 2025 Bsdewh Rn Uspfx Agkjdi The RR600GF trencher is your reliable partner for demanding ground work. Equipped with a powerful 420cc four-stroke engine delivering an impressive 12.4 HP, the machine effortlessly tackles even the hardest soil types. Thanks to the 27 robust carbide cutter teeth and the constant power delivery from the centrifugal clutch, you'll always work efficiently and precisely. It's conveniently started using the electric starter. SCHORR Trencher RR600GF – Discover the advantages: -- 420cc 12.4hp gasoline engine with electric starter -- 60cm continuously variable trenching depth -- 60m/h trenching performance -- 27 carbide teeth -- With parking brake -- Highly user-friendly -- Super compact design – easy to store and transport -- Extremely robust and reliable Technical specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR600GF Starter: Recoil starter (pull-cord) + electric starter Number of trenching teeth: 27 Max. trenching depth: 600mm Max. trenching speed: 60m/h Weight: 188kg Basic dimensions Overall length: 2143mm Overall width: 904mm Overall height: 1233mm Handle width: 623mm Engine Max. power: 9.4kW / 12.4hp Displacement: 420cc Fuel type: Gasoline *Further technical specifications are available upon request. With ergonomically designed controls and intuitive steering, the trencher is easy to operate. Thanks to the two tubeless main wheels, the trencher can be easily transported to its destination. The trencher features a locking wheel system to prevent them from accidentally rolling away during operation. The trencher is an essential tool for construction projects that require precision and efficiency. With its ability to quickly and precisely dig trenches in various soil types, it offers tremendous time savings compared to traditional methods such as shovels or excavators. Using a trencher not only allows projects to be completed faster, but also with fewer personnel and lower operating costs. The machine is ideal for laying cables, pipes, and irrigation systems, as it creates clean, even trenches and minimizes soil excavation. Of course, we usually have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the machine? No problem! We also offer attractive options for this. Simply contact us, and we will advise you on the various options. We look forward to hearing from you! We at SCHORR are happy to answer any questions you may have about our ride-on sweeper. You can reach our competent team by phone or email. We look forward to hearing from you and being able to assist you with your consultation.

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD Bodpfx Agoxt Dk Roksdi - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: used, APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Technical data: - Workpiece length: 55–170 mm - Workpiece height: max. 27.5 mm - Workpiece width: max. 28 mm Bsdpfx Asztvzhsgkedi - Milling units: 2 - Cross-cut saw: 1

Condition: excellent (used), For sale: a legendary, German-made WEILER Matador precision lathe (accuracy class according to DIN 8605 for toolrooms). The machine was imported from Germany and is in beautiful, original condition (original paint, no signs of industrial wear). The machine underwent rigorous technological tests under power – it is 100% functional, and the accuracy and repeatability achieved during test turning over the length of the shaft resulted in a difference of only 0.02 mm! The bed and lead screw are in perfect condition, which guarantees the precision for which the Weiler brand is known. This is an extremely compact version, ideal for precision model-making workshops, toolrooms, component refurbishment, or laboratories. Bdedpfx Agez I Ef Aeksi Technical specifications: • Manufacturer: WEILER (Germany) • Model: Matador (VS1 series) • Swing over bed: 280 mm • Swing over cross slide: 160 mm • Distance between centers: 500 mm • Taper in tailstock: Morse 3 (MK3 / MT3) • Spindle speed range: 30 – 3550 rpm (16 spindle speeds – ideal for modern indexable inserts) • Chuck: 160 mm Very extensive equipment included in the price: 1. Original Haidenhain digital readout (DRO): Factory-installed display system with scales, 100% functional and reading the axes. 2. Quick tool change system (Multifix): Original quick-change tool holder with a tool block. 3. Set of additional change gears: A complete set of gears for configuring the change gear mechanism for custom feeds/threads. 4. Tailstock equipment: Precision rotating center included. 5. Starter kit: Basic set of turning tools, allowing you to start working immediately. 6. Safety: Complete guard for the work area above the chuck, and factory-installed, bellows-type guards for the screws and lead screw. Logistics: • The machine can be fully tested and the accuracy tests can be repeated on-site under power. • LOADING INCLUDED IN THE PRICE – I provide safe and professional loading of the machine onto your transport using a forklift. Price: 24,200 PLN net (negotiable). VAT invoice provided.

Condition: excellent (used), • Model: WIDAX WULMIX-HE LINE M68 Ø160 R16 Bdedpjz Slh Uefx Agkei • Mounting: SK40 DV40A SE40 050 collet • Diameter: Ø160 mm • Number of inserts: large – full set • Insert type: 058 (reusable, replaceable) • Condition: very good, teeth and body without damage, ready for use • Steel body, precisely balanced • Manufacturer: WIDAX – Made in Germany • Ideal for CNC milling machines and machining centers with an SK40 spindle

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The machine is currently undergoing refurbishment; updated photos will be provided. Cutting length: 5000 mm with 2 saw blades operating simultaneously (for extra-long cuts up to 10 meters). Windows 10 PC New saw motors Pneumatics largely new or refurbished With uninterruptible power supply Additional tensioner on the roller conveyor Swiveling material support Automatically positionable via a DC motor, movable saw unit on hardened linear guide rails Travel speed approx. 20 m/min. Minimum section length 335 mm (5 mm) Maximum cutting length 5350 mm (9000 mm) Saw blade drive: 2 x 3 kW, 400 V, saw blade speed 2650 rpm Automatic electronic miter adjustment as standard up to 22.5° outwards and 45° inwards via servo motors External and internal dimension cutting Robust construction and proven workmanship guarantee the highest dimensional accuracy. Extremely stable welded construction with chip collection drawers in the machine bed Particularly large cutting area due to 550 mm saw blades Hydropneumatic saw blade feed Clamping devices, horizontally pneumatic, 1 each on the left and right of the saw blade Roller conveyor, 1.5 m long, with additional material support at the end of the frame LUBETOOL timed spray device Bdodo Afbrgepfx Agkji Pneumatic saw blade guard Operation via two-hand control according to BG regulations Suction nozzle for connecting a chip extraction system Includes 2 carbide circular saw blades, 550 mm Optionally also available with an integrated extraction system!