Used Carousel Shelf for sale (1,667)

Condition: excellent (used), Rear wall grating for shelf rack Schäfer R3000 Approx. 100 pcs. Used, very good condition, see pictures dimensions: 126 x 147 cm Mesh size: 5 x 5 cm Negotiation price: € 25,-- net per pc. ex stock Numerous gratings with different mesh sizes and bearing bars available! Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. Hjdpfx Akeiix D Eezen (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: like new (used), total length: 40,000 mm, shelf height: 5,000 mm, 40 running meters of Galler pallet racking New & used goods in very good condition, see pictures. Hjdpfx Aeqwx U Tjkzsn Height 5 m Depth 110 cm, galvanized Field load 12 tons Beam length 2.95 m yellow Beam with load / compartment 2550 kg Negotiated price: € 4.990,-- net ex stock Offer consists of: + 14 pre-assembled frames, depth 110 cm, height 5 m + 78 beams, length 2.95 m, 2550 kg load per compartment +159 pcs. suspension locks + 56 concrete anchors Load plates, documents etc. are included as standard. Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: used, 318 running meters of Bito P5 pallet racking Used goods in very good condition, see pictures. Height 9 m depth 110 cm, galvanized Field load 16000kg Beam length 3.6 m blue Beam with load / compartment 4000 kg Negotiated price: € 36.950,-- net ex stock Offer consists of: + 87 pre-assembled frames, depth 110 cm, height 9 m + 688 beams, length 3.6 m, 4000 kg load per compartment +1376 pcs. suspension locks + 348 concrete anchors Used corner protectors available immediately, surcharge per piece 15,- € net! Further accessories such as clamping plates, inlay grids etc. on request. Load-bearing plates, documents etc. are a matter of course. Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Hodpfxetut Iqe Akzjn Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: used, 140 running meters of Bito P5 pallet racking Used goods in very good condition, see pictures. Height 6 m depth 110 cm, galvanized Field load 16000kg Beam length 3.6 m blue Beam with load / compartment 4000 kg Hjdpfx Akstucx Hezen Negotiated price: € 15.500,-- net ex stock Offer consists of: + 39 pre-assembled frames, depth 110 cm, height 6 m + 304 beams, length 3.6 m, 4000 kg load per compartment + 608 pcs. suspension locks + 156 concrete anchors Used corner protectors available immediately, surcharge per piece 15,- € net! Further accessories such as clamping plates, inlay grids etc. on request. Load-bearing plates, documents etc. are a matter of course. Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: good (used), 4000 Insert grid 128 x 79.5 x 3cm Used goods, very good condition, see pictures. Support bar height 30 mm Support bar thickness 2 mm Mesh size 7 x 3.5 cm Galvanized Negotiated price: € 25,-- net per piece Price from 70 pieces 22.50 net per piece, larger quantities on request! 35 pieces per pallet Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Hodpforxtd Tsx Akzon Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: used, Year of construction: 2012, 90 running meters of Ramada pallet racking Used goods, very good condition, see pictures Height 4.6 m Depth 110 cm Beam length 2.7 m Load per compartment 3000 kg Frame blue Carrier orange Year of construction 2012 Negotiated price: € 8.150,-- net ex stock Offer consists of: + 33 pre-assembled frames, depth 110 cm, height 4.6 m Hjdpfotql H Rjx Akzen +192 beams, second-hand, length 2.7 m, 3000 kg load per compartment +384 pcs. safety catches +132 concrete anchors Load plates Goods are in stock. Transportation and assembly possible on request. Inspection possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: good (used), total length: 2,00,000 mm, shelf height: 5,000 mm, 200 running meters of Galler pallet racking New & used goods in very good condition, see pictures. Height 5 m Depth 110 cm, galvanized Field load 12 tons Beam length 2.95 m yellow Beam with load / compartment 2550 kg Negotiated price: € 23.390,-- net ex stock Offer consists of: + 67 pre-assembled frames, depth 110 cm, height 5 m +396 beams, length 2.95 m, 2550 kg load per compartment +792 pcs. suspension locks +268 concrete anchors Load plates, documents etc. are included as standard. Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Hedpfxeqwyd He Akzjn Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: good (used), total length: 1,20,000 mm, shelf height: 5,000 mm, 120 running meters of Galler pallet racking New & used goods in very good condition, see pictures. Height 5 m Depth 110 cm, galvanized Field load 12 tons Beam length 2.95 m yellow Beam with load / compartment 2550 kg Negotiated price: € 14.990,-- net ex stock Offer consists of: + 41 pre-assembled frames, depth 110 cm, height 5 m +240 beams, length 2.95 m, 2550 kg load/shelf +480 pcs. suspension locks + 82 concrete anchors Load plates, documents etc. are included as standard. Hodsqwybvjpfx Akzsn Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: excellent (used), Year of construction: 1995, Rotary / carousel wood gluing press HESS, 6 meters Year of manufacture: 1995 The press is operational and in good technical condition. Press infeed • Glue application machine with 2 rollers Technical data of the HESS gluing rotor • 4 working areas, each 6,200 x 1,000 x 150 mm • 4 pressing sections • 8 sliding pressure beams • 2 pneumatic pressure cylinders per each pressure beam • 21 hydraulic rams from above • Pressure force per cylinder: 35,000 N / 3,500 kg • Maximum total pressure at 120 bar: max. 73.5 tons per pressing surface Machine dimensions • Total length: rotor 11,100 mm • Depth: 3,050 mm Hsdpfx Aoy Rzk Sokzsn • Height: 3,350 mm • Weight: 13,500 kg

Condition: used, Writing desk, rolling desk, tiered trolley, logistics trolley, shelving trolley, transport trolley, platform trolley, workshop trolley FETRA Type 5834 Hedspflp Espfx Akzen Writing surface height: 1100 / 1190 mm Writing surface: 605 x 585 mm Shelves: 600 x 495 mm Load capacity per shelf: 50 kg Total load capacity: 100 kg - Rolling desk made of steel tubing and profile steel - Bolted construction, powder-coated, blue RAL 5007 - Writing surface made of wood panel with edge stopper, inclined approx. 10° - 2 shelves, variably screw-in (can hold 2 folder heights) - 4 swivel castors (Ø 125 mm) with plastic hub and rubber tread - 2 fixed castors with brakes Space requirements L x W x H: 600 x 600 x 1190 mm Net weight: 25 kg Very good, as-new condition 7 units available, price per unit

Condition: new, Technical Data for the Shelf Panel: Shelving System: Meta Type: Clip Scope of delivery includes: 01x Shelf panel, used Shelf designation: MS150-III Material finish: Sendzimir galvanized Hjdpfx Aksy H Hkpszen Dimensions: 1,000 x 500 x 40 mm Weight: 3.41 kg/piece Maximum load per shelf: 150 kg, with evenly distributed load. 04x Shelf support brackets 40 mm, used, galvanized silver, suitable for steel shelves with 40 mm upturned edge Finish: Zn blue + therm 4h, galvanized Color: Silver Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested individually depending on the delivery location and scope of delivery.

Condition: good (used), Year of construction: 2004, Hänel Rotomat 400 Paternoster The Hänel Rotomat 400 is a vertical carousel storage system (Paternoster) that operates on the "goods-to-person" principle and is utilized both for industrial storage and as an office lift for archiving purposes. The system optimally utilizes available room height to maximize storage capacity within a minimal footprint. Areas of Application The Hänel Rotomat 400 is used across a wide range of industries: Industry: For the storage of tools, measuring instruments, electronic components, and small parts. Office & Administration: As an automated archiving system for hanging files or binders. Medical Sector: For the sterile storage of surgical instruments. Overall Dimensions (L): 260 cm Overall Dimensions (W): 130 cm Overall Dimensions (H): 285 cm Max. Shelf Load: 150 kg Connection Values: 3~ N+PE 400V / 50Hz / 5.5 kW Year of Manufacture: 2004 Dismantling and removal to be arranged by the buyer. Dismantling Service: Professional dismantling can be performed by our specialized installation team upon request (€5,000 net). Item Location: Czech Republic Enhance Your Paternoster A carousel storage system is only as efficient as its internal configuration. Our specially tailored storage bins utilize the available shelf surface down to the very last millimeter. Find the right dimensions for your system in our other auctions. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Hodpfx Asy Nxp Askzon Find more storage lifts—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Technical data for the shelf panel: Racking system: SSI Schäfer Type: R 3000 Included in the scope of delivery: Shelf panels, used Material color: sendzimir galvanized Total width: approx. 994 mm Total depth: approx. 594 mm For frame depth: approx. 600 mm Height: approx. 30 mm Weight per unit: approx. 5.16 kg Hedpfx Aksy Ex Rlozsn Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Delivery or shipping of this item is possible at extra cost, which can be specified upon request depending on the place of delivery or delivery scope.

Condition: used, Beams: 2700x120x50 mm 63 units Frames: 5200x1000x95 mm 17 units 4600x1000x90 mm 4 units 2300x1000x95 mm 2 units If you require racks or accessories in different configurations or versions, please contact us. We offer a comprehensive range of new and used racking systems and accessories, and are happy to assist you with your planning. Further accessories available, such as: Hedpjh Izr Ujfx Akzen Frame, corner, and collision protection, push-through guards, chipboard panels, wire mesh shelves, rear mesh panels, depth bars. Shipping: Please enquire about shipping costs, specifying your postal code, location, and the quantity of items required. Additional services: Planning, rack assembly/disassembly, purchase/sale Technical data, specifications and prices are subject to change and errors. Previous sale reserved!

Condition: good (used), Year of construction: 2006, Approx. 100 bays of heavy-duty shelving racks, Gemac; this system does not require cross braces. Frame heights: 2.48m and 2.31m. Shelves: 1.20m x 1.30m, 130kg per level – used – Price per bay ex location: only €95 (net), dismantled, packed, and loaded! Price for minimum 100 bays: Per bay ex location: only €85 (net), dismantled, packed, and loaded! Manufacturer: Gemac Model: likely Normaflex Year of manufacture: 2006 Frame height: approx. 2.48m Bay depth: 1.20m Bay width: approx. 1.31m (including the frame, two bays are approx. 2.74m wide) Shelves: Load capacity per shelf: 120kg Load capacity per bay: 850kg Shelves per bay: 6, including a top shelf that can also be used for storage The 6 shelf levels consist of 3 large continuous shelves and 3 levels made of narrower shelves (that together also create a large surface) Shelf anti-lift locks must be re-purchased new if required by the buyer – normally they are not necessary (plastic locks are usually damaged during dismantling – but there are also new metal types available) Feet are plugged in and then screwed once The upper shelf is bolted to the next frame or shelf with a connector plate (everything else is plugged), so no cross braces or similar are required due to this and the three large shelves with stiffeners Available: approx. 100 bays immediately, for installation in 25 x 4-bay sections Condition: good – very good Location: D-77749 Hohberg Hjdpfxjy D Tm Ss Akzon

Condition: used, Used equipment Features and technical data: - 2 L-shaped uprights with support tubes - 12 support tubes per upright - Clear height: 92 mm - Plug-in system for adjusting the clear height - Support tube diameter: 29 mm - Usable length of support tubes: 770 mm - Maximum load capacity of entire trolley: 500 kg (requirement: evenly distributed load, no impact loads) - Maximum load on 2 support tubes: 45 kg - 4 swivel castors with ball bearings and cast polyurethane coating, 160 mm - 2 castors with locking devices - Dimensions LxWxH: 500 - 3000 x 845 x 1840 mm Hedpfx Ajy Ap U Njkzen Availability: short notice Stock location: 63934 Röllbach

Condition: excellent (used), functionality: fully functional, load capacity per storage section: 9,000 kg, total height: 4,400 mm, total width: 2,700 mm, load capacity: 1,800 kg, frame height: 4,400 mm, frame width: 1,100 mm, For sale: a complete set of MGL HX pallet racking – a robust, proven system for standard pallet storage. The ideal solution for operational warehouses, e-commerce, and medium-duty logistics. Goods available immediately – fast delivery with no weeks of waiting. Specification: System: MGL HX Type: Pallet racking Frames: Quantity: 400 pcs Height: 4,400 mm Depth: 1,100 mm Hodpsywrryefx Akzsn Beams: Quantity: 3,000 pcs Length: 2,700 mm Load capacity: 1,800 kg per level Why choose this solution: ✔ Universal height – perfect for most warehouses ✔ Excellent price-performance ratio ✔ Large quantity – suitable for complete facility fit-out ✔ Immediate availability – minimize your warehouse startup time Additionally, we offer: Dismantling and installation Transport across Europe Assistance with warehouse layout planning and optimization Location: Poland Availability: Immediate Contact: Write or call – we will prepare a configuration tailored specifically to your warehouse.

Condition: excellent (used), Year of construction: 2022, total length: 1,850 mm, total height: 120 mm, load capacity: 3,000 kg, For sale: STOW cross beams in perfect condition, more than 5,000 units available -1850mm -120x50, 3000kg Hedpjxprfzsfx Akzsn

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, support length: 3,600 mm, shelf length: 11,200 mm, frame height: 4,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 1, 1 row of pallet racking (M45113615-3) 11.2 m long, 4.5 m high, 1.1 m deep, 3 sections, each 3.6 m wide, each with 3 beam levels, compartment load capacity 3,000 kg. - 4 frames (RM4511 - RAL5019) - 8 base plates, spacer material, fastening material - 16 floor anchors (ZZBA1210) Hodpfx Aev Urchokzjn - 18 individual beams (T3615 - RAL2008) - 1 load capacity sign (BSMcP) Frames bolted, not pre-assembled Shipping / Delivery: - up to 20 working days after receipt of payment - free delivered to construction site / assembly location - Unloading from the truck is to be carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany, excluding islands! Deliveries to EU countries by individual agreement.

Condition: used, Year of construction: 2017, functionality: fully functional, load capacity per storage section: 1,500 kg, total length: 2,700 mm, total height: 100 mm, total width: 50 mm, Pallet rack / Heavy-duty rack / Beam L=270 from HLF Heiss Only the beams are being sold Used item, in excellent condition, see photos Supplier: HLF Heiss Quantity: 200 pcs Beam length: 270 cm Beam height: 10 cm / Width: 5 cm Maximum load per level: 1,500 kg Hodey H Ew Iopfx Akzsn Color: orange Including locking pins Year of manufacture: 2017 Item is in stock in Wilfersdorf near Mistelbach/Lower Austria. Transport available upon request. Inspection possible at any time by appointment.

Condition: used, We are offering used cross beams for sale. TECHNICAL DATA Clear width: 2,830 mm Box profile: 110 x 50 mm Colour: orange Condition: used PRICE €19.00 net per unit €22.61 gross per unit TIERED PRICING per unit - Stock of 2,500 units 1 - 30 units: €19.00 net 31 - 60 units: €18.24 net 61 - 120 units: €17.48 net from 121 units: €16.72 net PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, tailored quotation. TRANSPORT & ASSEMBLY We are pleased to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms to be agreed in the event of an order. All prices are quoted per unit/net price or as specified in the item description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals in new and used products relating to warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and craft businesses. We continually offer attractive used equipment from various manufacturers/brands at competitive conditions. Please feel free to contact us if you have any questions. Hedpfoy Nlhfjx Akzjn Four to win – The DLK success building blocks – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level. Hjdpfx Aoh R Taqjkzsn

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Hsdpfomhhypex Akzjn - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Hedpfx Aemhh Dhskzsn - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. Hedpfx Akofdkb Tozsn The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.