KSB Pump Etaline GN Centrifugal Pump Double Pump + Frequency Converter

KSB GN G

Condition: good (used), KSB Etaline GN G10 Pump Inline pumps and three-phase standard motor with a motor-mounted frequency converter for stepless speed control. Applications: Heating systems Air conditioning systems Domestic water systems Water supply Industrial circulation systems Fluid Liquids that do not chemically or mechanically attack the pump materials. Operating data Q 17.50 m3/h H 5.8 m Please refer to the data sheet for further information on this pump. 1) The sum of the inlet pressure and the delivery head at zero flow rate must not exceed the specified value. Design Block pump in inline design, with speed-controlled standard motor, pump and motor shaft are rigidly connected. Bearings Cedpfx Aed Sqkzoi Ssrh Deep groove ball bearings, grease-lubricated. Shaft seal Uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 65 Nominal size of suction/pressure nozzle: 160 Further technical data can be found in the data sheet. Item condition: used Scope of delivery: 1 x KSB Etaline GN G10 pump

Year of construction: 2018, condition: new, machine/vehicle number: DMPMFG200x200, Magnetic filter grid in housing / cabinet construction V2A quality (for free-fall applications to investigate dry and free-flowing bulk solids) Crodpfx Asdtdwaji Soh Magnetic grid 200x200mm High-quality cabinet construction completely closed Easy cleaning by pulling out the magnetic cores High quality magnetic filter rods completely closed Magnet NdFeB N45, Br 8500 Gauss Tmax 80 ° C 4x M10 threaded rod incl. Wing nut as clamping unit Guide rod center: Entrance level right Outlet below

Condition: good (used), KSB Etaline GN G11 centrifugal pump Inline centrifugal pump and three-phase standard motor with a motor-mounted frequency converter for stepless speed control. Applications: Heating systems Air conditioning systems Domestic water systems Water supply Industrial circulation systems Fluid Liquids that do not chemically or mechanically attack the pump materials. Operating data Q up to, see data sheet H up to, see data sheet The data for this pump can be found in the data sheet. 1) The sum of the inlet pressure and the head at the zero flow point must not exceed the stated value. Design Block pump in inline design, with a speed-controlled standard motor; the pump and motor shafts are rigidly connected. Codpfxoiu U Txo Ai Sorh Bearings Deep groove ball bearings, grease-lubricated. Shaft seal Uncooled and maintenance-free mechanical seal according to EN 12 756. Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 80 Nominal size suction/discharge nozzle 210 Further technical data can be found in the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN G11

Condition: new, For sale is a NEW, unused KSB ETABLOC GN 40-125/402 G10 centrifugal pump with the original KSB electric motor. This is a stock item – the pump has never been used or operated. Due to long-term storage, there may be only minor signs of storage or transport. The pump is in very good, practically factory-new condition. The original KSB packaging, as shown in the pictures, is also available. Pump technical data: Manufacturer: KSB Model: ETABLOC GN 40-125/402 G10 Flow rate Q: 31.00 m³/h Head H: 25.45 m Rotational speed: 2950 rpm Year of manufacture: 2012 Mat.-No.: 01216137 Number: 9972270914 000100 01 CE marking Motor data: Manufacturer: KSB Power: 4.0 kW Voltage: 400 V Δ / 690 V Y Frequency: 50 Hz Speed: 2950 rpm Rated current: 7.8 A at 400 V Efficiency: 85.8% cos φ: 0.86 Protection class: IP55 Crodpfx Aszvyinei Sjh Insulation class: 155 (F) Efficiency class: IE2 Design: IMV1 Made in Czech Republic Condition: NEW / UNUSED / STOCK ITEM The pump has never been used or operated. Any minor visual marks are solely due to storage and transport. The set being sold is exactly as shown in the pictures.

Year of construction: 2008, condition: ready for operation (used), Three small window and profile processing machines are available. 1) Urban WS 103 water hole cutter, year of manufacture: 2008. 2) Urban AKS 1105 single-head automatic welder with new cylinder. 3) Stegmaier AK 84 flat threshold for window frames, year of manufacture: 1984. On-site inspection is possible. Individual sale possible. Crjdewwvwyjpfx Ai Soh

Condition: excellent (used), 1. Permanent-magnet chuck, D = 315 mm, with mounting flange according to DIN 55027, size 6. Codsd Eaauopfx Ai Sjrh

Condition: excellent (used), Year of construction: 2005, power: 225 kW (305.91 HP), fuel type: diesel, type of cooling: water, Regularly maintained Volvo Diesel fire water pump for sale in new condition Machine hours: 298 inspection and oil change at all maintenance intervals, regardless of use. Manufacturer: Kagema DPA Engine: Volvo Penta TWD 710 V 218 kW / 296 HP 6-cylinder diesel engine Data: Crsdjhfl Dmjpfx Ai Ssh Manufacturer: Volvo Penta Type: TWD 710 V. Spec.NO .: 868725 Serial number: 2071093240 Vermogen: 225 kW / 304hp Speed: 2450 rpm Fuel: diesel Length: 330 cm Width: 120 cm Height: 220 cm tank: 400liter water transport ca: 800-900m3 6.5 bar pressure water pump type: KSR-MXN 150-315 "missing" Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Year of construction: 2020, condition: new, Dimensions: 250x250x80mm Filter systems are used for the thorough separation of finest ferrous metal contaminants. Examination of shoe goods Universally applicable in pipe systems, funnels & slides Easy handling and cleaning Permanent magnetic filter grids can be manufactured in round, rectangular or square design. Cedpfxedzqw Io Ai Sjrh Ferrous particles are reliably filtered out of the ware as they pass through the grates. In addition, this design provides easy cleaning of the stave. The filter system can be removed from the jacket with a handle. The maximum operating temperature is 80 ° C.

Year of construction: 2011, condition: ready for operation (used), A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware screwing machine in continuous operation, year of manufacture: 2008. 10) Stürtz SE-VW-FT distribution and stacking trolley in the sash buffer system, year of manufacture: 2008. This is a complete production line for window construction. Documentation available. An on-site inspection is possible. Crodszcyqmspfx Ai Soh

Condition: good (used), Pulsotronic magnetic separator (operating manual available) Magnetic separator for use with, e.g., material vacuum cleaners Cedod Dpvhopfx Ai Sjrh New price: €4,850