Used Channel Baler for sale (1,109)

Condition: good (used), Year of construction: 2020, functionality: fully functional, Horizontal baler Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The baler is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Gsdpfez A Ty Dsx Ap Dobu This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is made against advance payment, ex works, without warranty.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons Gbodpfoyzr Nmsx Ap Dsu • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 90 t, bale weight: 700 kg, type of input current: three-phase, total width: 220 mm, total height: 240 mm, overall weight: 23,000 kg, total length: 1,142 mm, filling opening width: 90 mm, filling opening length: 140 mm, bale width: 80 mm, bale length: 1,200 mm, bale height: 110 mm, tank capacity: 1,100 l, year of last overhaul: 2025, Equipment: documentation/manual, Paal Licon 250 SC Channel Baler Gbjdpfx Asxdnn Ijp Deu Originally built for baling non-ferrous scrap, for the last 12 years this machine has been used at a packaging plant. It processed 700–800 tonnes of cardboard per month. Machine specifications: - Length: 11.42 m - Width: 2.20 m - Pressing force: 80 t - Bale/channel dimensions: 110 x 80 cm - Feed opening: 140 x 90 cm - Machine weight: 23 t - Dual high-efficiency cooling system designed for continuous 24-hour operation in a warm workshop environment The machine floor has been overhauled; the main ram/cylinder is just six months old. The knives for trimming excess material have been replaced and upgraded for faster and more efficient operation. In 2025, the hydraulic oil was changed, distribution valves serviced, and all rollers of the main plunger/plate replaced. The pressing ram has also been refurbished. Comes with plenty of spare parts. Equipped with upgraded electronics and control panel from 2018, fully operational and ready for immediate use. Operation via touchscreen display. Comprehensive photographic documentation from the dismantling process is available. Complete technical documentation (DTR) in Polish and electrical schematics included. Testing of the machine is possible on-site. Additionally available: - Roller bale discharge system with conveyors, tipper, weighing system, and bale storage (as shown in the photos), Or optionally: - Tipping elevator for emptying 1100 L or 660 L bins - PAAL KES1750 chain channel conveyor: width 1750 mm, horizontal section 8 m, inclined section 8 m.

Condition: excellent (used), ABBA ALBAMAT 900 V5-Z1 – Fully automatic channel baler – 90 t pressing force Manufacturer: ABBA Pressentechnik Type: ALBAMAT 900 V5-Z1 The machine is in very good, fully functional condition and is available immediately. An inspection and test run can be arranged. The ABBA ALBAMAT 900 V5-Z1 is a powerful, fully automatic channel baler for high throughput and is ideally suited for compressing a wide variety of recyclable materials. Gbedpezil S Ujfx Ap Dju Suitable for: * Cardboard * Waste paper * Corrugated cardboard * Printing waste * Plastics (PET, HDPE, etc.) * Films * Aluminum and tinplate cans * Wood shavings * Glass wool * Shrubbery cuttings Equipment * 90 t pressing force * 1 main press cylinder * Large feed opening * 5-point fully automatic vertical wire tying * Hydraulically automatic 3-sided channel adjustment * Hardox press bed * Hardox piston guide with wear-resistant guide strips * High-performance cooler * Control cabinet and tank heating * 10 different press programs * 5.7” touchscreen operation * Floor and piston slides to protect the tying unit Technical data * Pressing force: 90 t (900 kN) * Feed opening: 1,140 × 1,700 mm * Bale dimensions: approx. 1,080 × 1,100 × up to 1,200 mm * Bale weight paper/cardboard: approx. 500–750 kg (material dependent) * Drive power: 90 kW * Throughput cardboard (35 kg/m³): up to approx. 10 t/h * Flow rate at idle: 698 m³/h * Flow rate under operating conditions: 543 m³/h * Cycle time: 16 seconds * Specific pressing force: 76 N/cm² * Machine weight: approx. 24,000 kg Available for immediate delivery. Transport and loading can also be arranged upon request.

Condition: good (used), Year of construction: 1996, 2 pieces Fab. Hofmann Year of construction 1996 Gbsdpfertngcjx Ap Dsu Bale size (channel size)= 80 x 60 cm Bale weight e.g. hay = 220 kg/bale with 1.4 m bale length Hydr. baling pressure = 300 bar Automatic bale tying with 3 wires Ø 3.1 mm Baling capacity approx. 5 t/h Motor power = 18 kW incl. collecting screw under baler incl. electrical control with Wago PLC (year of manufacture 2022) undismantled

Condition: used, Year of construction: 1979, operating hours: 8,489 h, first registration: 09/1979, machine/vehicle number: 2382524565, Equipment: - Ready for operation - All-wheel drive - Industrial front loader - Super low-speed gear Gbsdjz Ncz Repfx Ap Dsu - Completely restored in 2025 ATTENTION: - The bid requires approval!!! - Differential taxation = Your bid price is subject to an additional 18% commission and 19% VAT on the commission!!!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Gjdsygud Aepfx Ap Dsbu Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: excellent (used), Year of construction: 2016, Make: HSM Model: V-press 860 plus Year of manufacture: 2016 Press force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Gbjdpfx Asz Ndwpep Dsu Feed opening dimensions: 120 cm x 65 cm Video available upon request.

Condition: used, functionality: fully functional, The device is complete and operational – it was previously used in conjunction with a Pitney Bowes XPV inserting machine. Gbodpjy Izcpofx Ap Dsu

Condition: used, Year of construction: 2007, functionality: fully functional, Envelope inserting machine KERN 3500 Twin Channel K990 Year of production: 2007. Counter: 145 million Full service contract. When purchased together with the Kern 2600, an attractive price for the machines can be negotiated. Gbjdpfxjxfwfxj Ap Deu I have 2 machines for sale with this configuration.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 400 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory value-added tax, ex works and without packaging. The baler has been cleaned, functionally tested, repaired, and equipped with a new control system in accordance with EN16500. All replacement parts used are original parts from Strautmann. Technical details: Gjdpfxezv Rraj Ap Djbu Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale dimensions (L x W x H): 1180 x 700 x 800 mm External dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 400 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales / hour Number of belt channels: 4 Weight of the baler: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors, covered Including starter kit with baling wire, 19mm Serial number: 533.02.090 Year of manufacture: 2002

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 400 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2026, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory value-added tax, ex works and without packaging. The baler has been cleaned, functionally tested and repaired. All replacement parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale size (L x W x H): 1180 x 700 x 800 mm External dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 400 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales / hour Number of belt channels: 4 Weight of the baler: 2,300 kg Gedpfjzwwp Iex Ap Djbu Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors under cover Includes starter set of baling wire, 19mm Serial number: 533.02.442 Year of manufacture: 2003

Condition: ready for operation (used), Year of construction: 2010, Brand: DIXI Model: 60 SD Year of construction: 2010 Pressing force: 60 tons Voltage: 400 Maximum bale weight: 340-500 kg Gbsdpfx Aoz Iufrep Deu Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Dimensions of filling opening: 115 cm x 80 cm deep x 55 cm high The DIXI 60 SD features simple operation, an automatic start function, and automatic bale ejection. Thanks to its compact, low-profile design, this machine is ideal for spaces with limited height. Video available upon request!

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2026, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory value-added tax, ex works, and excludes packaging. The baler has been cleaned, function-tested, repaired, and equipped with a new control system in accordance with EN16500. All replacement parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Godpfozv S E Uex Ap Djbu Type: PP 1207 Bale size (L x W x H): 1180 x 700 x 800 mm External dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales / hour Number of bale tie channels: 4 Binding material: Wire Weight of the baler: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors under cover Includes starter kit with bale tie wire, 19mm Serial number: 610.00.117 Year of manufacture: 2003

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2026, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory value-added tax, ex works and without packaging. The baler has been cleaned, functionally tested, repaired, and equipped with a new control system in accordance with EN16500. All spare parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale dimensions (L x W x H): 1180 x 700 x 800 mm Gedozv Thdspfx Ap Dsbu External dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales / hour Number of belt channels: 4 Binding material: wire Weight of the baler: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors under a roof Includes starter kit with bale strap, 19mm Serial number: 610.01.569 Year of manufacture: 2005

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2026, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory value-added tax, ex works and without packaging. The baler has been cleaned, function-tested, repaired and equipped with a new control system according to EN16500. Gjdpfezv Ta Tox Ap Dsbu All spare parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale size (L x W x H): 1180 x 700 x 800 mm External dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales / hour Number of belt channels: 4 Binding material: Wire Weight of the baler: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors, covered Including starter kit with baling wire, 19mm Serial number: 610.00.395 Year of manufacture: 2004

Condition: used, Year of construction: 2013, functionality: unexamined, overall weight: 8,500 kg, Klanke S-45 HKV – Industrial/Machine Drive, 24 kW, 400 V For sale is a Klanke S-45 HKV machine/machine drive from Klanke Maschinenvertrieb. Technical data according to the nameplate: Manufacturer: Klanke Maschinenvertrieb Type: S-45 HKV Machine No.: 13201 Drive power: 24 kW Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 12/2013 Weight: approx. 8.5 t CE marking present The machine comes from a commercial operation. Condition: used. Godoz Daudopfx Ap Dsbu The exact technical condition can be checked during an inspection. Sold as shown in the pictures.

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, bale width: 300 mm, bale height: 300 mm, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Gedpfx Asy Tlzajp Debu

Condition: used, Year of construction: 2012, operating hours: 2,300 h, functionality: fully functional, total width: 2,500 mm, total length: 8,000 mm, total height: 2,200 mm, operating pressure: 300 bar, pressure: 180 bar, bale width: 650 mm, bale length: 850 mm, bale height: 6,980 mm, overall weight: 21,500 kg, For sale: a hydraulic press for crushing car bodies, manufactured by the reputable company ECOTECNICA, model ORCA S5250-P. Godpfoz Afa Esx Ap Dsbu Year of manufacture: 2012 Engine: Deutz D91, 6-cylinder, 150 HP Pressure: 300 bar This machine has been operating reliably in our company. Operating hours: approximately 2300. Price negotiable.

Condition: good (used), Year of construction: 2008, Baler press for making bales of sawdust For 20 - 25 kg Gsdpfxsz Rnhts Ap Dsbu Capacity 4 bales per minute

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Cardboard waste compactor press. Godpez Ibwnefx Ap Dsbu

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Gbjdpsyuyg Sofx Ap Dju Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included.

Condition: ready for operation (used), Year of construction: 2003, Baling press Hsm 500.2 vl Fourfold wire tying of bales Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Gsdora Ak Espfx Ap Debu Bale weight (kg): approx. 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Filling opening (mm): 1200 x 565 Cycle time (sec): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Vertical baler Hsm V press 500.2 VL Year of manufacture: 2004-2008 Price: 3,500 EUR Transport height: 2600 mm

Condition: used, Year of construction: 2018, Channel baling press Avermann AVOS 1810 BRK-90/100, year of manufacture 2018, with cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of feed hopper: 1,800 x 1,000 mm Throughput at 35 kg/m³: 15.0 t/h Throughput at 60 kg/m³: 20.0 t/h Throughput at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, material-dependent Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty. Gbjdpez H I Dxefx Ap Dou Our payment terms are 100% prepayment.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 490000709, pressing force: 25 t, bale length: 1,200 mm, bale width: 780 mm, bale height: 700 mm, bale weight: 280 kg, total width: 1,700 mm, total height: 2,370 mm, total length: 1,248 mm, type of input current: three-phase, input voltage: 400 V, input current: 8 A, overall weight: 1,210 kg, power: 4 kW (5.44 HP), input frequency: 50 Hz, Turn your waste paper into money! With the HSM V-Press 825 plus pro, you can transform loose cardboard and waste paper into compact, marketable bales. We sell our own cardboard bales to a recycling company – take advantage of the potential of your recyclable materials! The purchase conditions depend on the material quality, quantity, and regional buyer. At the same time, you reduce cardboard piles, gain valuable storage space, and create order in your business. We are selling our vertical baling press, the HSM V-Press 825 plus pro, model year 2016, directly from our facility. Your advantages: • Fully functional • Maintained by a specialist company • DEKRA-certified • Suitable for cardboard, paper, and film • Inspection and demonstration possible while powered Ideal for production companies, warehouses, mail-order businesses, and commercial enterprises that want to collect their packaging waste in a space-saving manner and prepare it for recycling. Technical data: • Model: HSM V-Press 825 plus pro • Year of manufacture: 2016 • Pressing force: 250 kN (approx. 25 tons) • Bale dimensions: 1,200 × 780 × max. 700 mm (L × W × H) • Bale weight: up to 280 kg, depending on the material • Motor power: 4.0 kW • Power connection: 400 V three-phase / 50 Hz • Rated current: 8.5 A • Machine dimensions: 1,700 × 1,248 × 2,370 mm (W × D × H) • Machine weight: approx. 1,210 kg • Machine number: 6152.314 • Serial number: 490000709 Gbsdpfx Aez Ad Rpep Dju See for yourself how the press works! Arrange an inspection appointment now in Simmozheim near Stuttgart. Send us your desired date via "Send Inquiry" or call us directly.