Used 2 Ram Baler for sale (78,044)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Lodpfxjy R Nnfe Acksab Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: ready for operation (used), Siemens Teleperm M 6DS1837-8EA Ram memory module E Stand 2 SN CO960610 used 100% functional Ledpfx Aexahx Sjckeab

Condition: like new (used), - Brand: Graco - Reference: CM1145 - General Industry - Application: Bonding, Sealing, PVC, Gaskets, Encapsulation, Molding, Discharging, Filling in case of material shortage - Maximum flow rate: 3.4 L/min - Maximum working pressure: 276 bar - Maximum air inlet pressure: 8.62 bar Lasdpfxev S Dzds Ackjb - Pressure ratio: 40:1 - For 20 L drums - Maximum operating temperature: 49°C - Fully inspected pre-owned product - 1-year warranty (Except for electric machines and non-Graco products) - Shipping or in-store pickup available - 21% VAT not included - VAT included. A VAT refund may be requested for VIES-registered companies or those with a TAX ID. - Customs and tariff fees are the buyer's responsibility in the case of imports

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C / 110-A-1 Permanent Magnet Motor, Serial No.: MAC090-80045, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ledpfx Ajy T Unpsckeab

Condition: ready for operation (used), Indramat MAC090B-0-PD-4-C/110-A-2/WI524LV/S013 permanent magnet motor, serial number: MAC090-96305, used, in good condition, 100% functional, scope of supply as shown in the photos. Lasdpey T Unvjfx Acksb

Condition: ready for operation (used), Indramat MAC093B-1-GS-4-C / 110-A-2 / WI539LV / S001 three-phase AC servomotor, serial number: 8088V, used, in good condition, 100% functional, scope of delivery as shown in the photos. Laodpfx Acey T Un Njksb

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C / 110-A-1 three-phase AC servomotor, serial number: 42433, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lasdpfoy T Unijx Acksb

Condition: ready for operation (used), Indramat MAC090C-0-GD-2-C/110-A-1/S001 permanent magnet motor, serial number: MAC090-77267, used, in good condition, 100% functional, scope of supply as shown in the photos. Lasdpey T Un Aofx Ackjb

Condition: ready for operation (used), Stator for Indramat MAC 071A-0-ES-2-C / 095-A-0 permanent magnet synchronous motor, serial number: 15467, used, in good condition, 100% functional, scope of delivery as shown in the photos. Laedpfx Asy T Dm Uocksb

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0 Permanent Magnet AC Servo Motor, Serial Number: 6782V, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lodpfoy T Dm Iex Acksab

Condition: ready for operation (used), Indramat MAC 71A-0-ES-2-C/095-A-1 permanent magnet synchronous motor, serial number as shown in the photo, mounting hole spacing: 92 x 92 mm, drive shaft diameter: 19 mm, used, with normal signs of wear, 100% functional. Ledoi D Iktjpfx Acksab

Condition: ready for operation (used), Stator for Indramat MAC 90A-0-RD-2-C / 110-A-0 three-phase servo motor, serial number: 13545, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lodpfoy T Dnrox Ackeab

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0, permanent magnet synchronous motor, serial number: 12254, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Laedpfxsvy N Sqj Acksb

Condition: excellent (used), Year of construction: 2009, Large working width: 1020 mm For sheet metal (with a tensile strength of 40 kg): up to 2 mm Small bending width: 10 x s Small inner radius: 1.5 - 2 x s Opening width of the upper die: 190 mm Highest working point of the upper die: 120 mm Lowering distance of the lower die: 60 mm Small box profile (W x H): 165 x 125 mm Space requirement (W x D): 1700 x 550 mm Lsdpfoy S Abujx Acksab Height with raised counterweight: 1650 mm Weight: 560 kg

Condition: good (used), Permanent magnet motor, permanent magnet motor, electric motor, n-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor Lasdpfx Asrqipnjckob -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-A-0/S001 permanent magnet three-phase servo motor, serial no. as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Please ask for price separately! Ledpfx Aoi D Ihueckeab

Condition: ready for operation (used), Indramat MAC071B-0-TS-3-C / 095-B-2 Permanent Magnet Motor, SN:MAC071-62033, encoder connection cable missing, used, normal signs of use, 100% functional, scope of delivery as per photos Ledpfx Aji D Ik Eecksab

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 permanent magnet - three-phase servo motor, SN:68352, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,For this item, the agreed sales discounts do not apply. Price please enquire separately!,ATTENTION: Costs for packing and shipping please enquire separately! ATTENTION: Please enquire for charges for packing and transport separately! Lsdpfsi D Ii Ijx Ackoab

Condition: new, Indramat MAC112B-0-GD-2-C/130-A-1/S005 Permanent Magnet Motor, SN:MAC112-10094 ,unused in opened original box, 100% working, scope of supply according to photos Lsdpfx Aji D Ipusckeab

Condition: ready for operation (used), Indramat MAC115A-0-FS-2-C / 180-B-1 / S001 Permanent Magnet Motor SN:MAC115-04930, used, normal signs of use, 100% functional, scope of delivery as per photos Ledji D Irhepfx Acksab

Condition: ready for operation (used), Indramat 2 AD 100B-B05OA1-AS01-B2N1 asynchronous main drive motor without encoder SN: 6697, used, in good preserved condition, 100% functional, scope of delivery as per photos. Laedpfx Acsy Npd Dokeb

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-B-0/S001 permanent magnet three-phase servo motor, serial no. according to photo, used, strong traces of use, 100% functional, scope of delivery according to photos Ledei D Ih Ajpfx Ackjab

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 SN: 68351 Permanent magnet three-phase servo motor, hole spacing of the mounting holes: 152x152 mm, drive shaft diameter: 32 mm, used, normal signs of use, 100% functional, shipping costs please inquire separately! Please ask for transport charges! Laedpfsi D Ii Dex Acksb

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor SN:MAC093-56032, used, strong signs of use, 100% functional, scope of delivery as per photos Lasdpfxsi D Im Se Ackjb

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0 permanent magnet three-phase servo motor, SN:35588 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,The agreed sales discounts do not apply to this item. Price please ask separately! Laedpfei D Ig Eex Acksb