Used Charging System for sale (42,435)

Condition: used, operating hours: 662 h, lifting height: 4,600 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX60-30/600L electric forklift, manufactured in 2021, with only 662 operating hours! Previous owner: German Armed Forces. Rated load capacity: 3,000 kg, lift height: 4,600 mm, fork length: 1,800 mm, with scales, side shifter, triplex mast, free lift, and STVZO-compliant lighting, including charger. In good condition and ready for immediate use! Upon request, we will gladly provide you with a leasing or financing offer. Mr. Mihm (tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted! Power steering, protective roof = Further information = Year of manufacture: 2021 Lifting capacity: 3,000 kg Bljdpfx Akozwlx Dstsp Overall height: 225 cm Please contact Tobias Ebert for more information.

Condition: used, operating hours: 1,386 h, lifting height: 4,600 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX60-30L/600 electric forklift, year of manufacture: 2021, battery valid until 2026, hours: only 1,386!, previous owner: German Armed Forces, rated load capacity: 3,000 kg, lift height: 4,600 mm, fork length: 1,800 mm, scales, side shifter, triplex mast, free lift, STVZO lighting, including charger, in good condition, ready for immediate use. We will be happy to provide you with a leasing or financing offer upon request. Mr. Mihm (tel. ) will gladly assist you. Further information can be found on our website. Subject to errors and prior sale! Power steering, overhead guard = Further information = Year of manufacture: 2021 Bodpfszwlynox Aktolp Lifting capacity: 3,000 kg Overall height: 225 cm Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2017, No. 1 rectangular filter station with a mechanical shaker cleaning system, operating under positive pressure, with the following dimensions: Width: 3,400 mm Length: 6,600 mm Height: 7,500 mm Filtering surface: 396 m2 Manufactured from galvanized steel sheet, complete with: Bledpfx Akjz Hz Htetsp - No. 160 polyester satin filter bags, 350 g/m², Ø250 × 3,000 mm, open at both ends; - No. 320 galvanized quick-release clamps, Ø250 mm; - No. 2 filter support frames; - No. 1 electric motor, 2.2 kW – 6 pole; - No. 1 external filter housing enclosure; - No. 1 access door to the filter compartment; - No. 1 vertical access ladder to the filter compartment; - No. 2 clean-air discharge stacks complete with air sampling connections; - No. 6 braced support legs; - No. 1 dust collection hopper complete with inspection hatch; - No. 1 screw conveyor, complete with 2.2 kW – 4-pole gear motor, steel shaft and flight, bearings, and supports; - No. 1 rotary airlock valve, complete with 1.5 kW – 4-pole gear motor, steel shaft, and rubber blades; - No. 1 high-level indicator; - No. 2 transparent PVC inspection windows; - No. 1 Ø200 mm tee connection complete with anti-clogging micron vent; - New galvanized bolts, nuts, and sealing gaskets for future reassembly.

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg INJECTION UNIT (120) Bodpfxez D U D Tj Aktjlp Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l INJECTION UNIT (840) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1946 bar Stroke volume: 442 cm³ Shot weight (PS): 400 g Max. dosing stroke: 225 mm Barrel heating power: 14.8 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A25-S5-22-48417, input voltage: 230 V, overall weight: 51 kg, Dear Sir or Madam, We are selling: FARO Quantum S MAX 2.5 m, year of manufacture 2022, fully functional, current calibration available, including CAM2 Probing Edition with an unlimited CAM2 license and USB dongle, complete with all accessories. - Arm reach: 2.5 m - Number of axes: 7 Sale only to business customers; no warranty. Equipment: - Calibration kit - Transport case - Mounting plate - 3 mm and 6 mm iProbes - USB cable Bodpezxn E Nofx Aktjlp - Power cord 230 V - Rechargeable battery - Mount G3+, magnetic holder 150 mm - Measuring software CAM2 Probing Edition 1, unlimited license for CAM2 - USB dongle, single-user license Please contact us if you have any questions.

Condition: used, empty load weight: 9,500 kg, axle configuration: 3 axles, first registration: 08/2019, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/55 R22,5, wheelbase: 7,600 mm, Year of construction: 2019, Equipment: ABS, Tare weight: 9500kg, Loading area (L W H): 13.403 mm x 2.490 mm x 2.650 mmRiepu izmērs: 385/55 R22.5, Loading area volume: 88 m³, 1. ass: , 2. ass: , 3. ass: , Pneimatiskā piekare, Palešu furgons, Elektroniskā bremžu sistēma EBS, Rezerves riteņa turētājs (2x), Ferry फेरी फास्टनिंग के छल्ले, Šasija ir pieskrūvēta, 1x15- un 2x7-pin spraudnis, Āķis gaļai, Antispray, Bedoz Sfq Njpfx Aktslp

Condition: used, functionality: fully functional, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 05/2008, color: orange, Year of construction: 2008, We are offering this used m-tec silo discharge system, Mathis silo semi-trailer, manufactured in 2008. Factory number: 1460408001 Year of manufacture: 2008 Vehicle identification number: 1462868 2M 001 Permissible total weight: 34,800 kg Permissible axle load, axle 1: 10,000 kg Blsdpfjz Snzcex Aktsp Permissible axle load, axle 2: 9,000 kg Permissible axle load, axle 3: kg Permissible axle load, axle 4: kg Permissible semi-trailer load: 18,500 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, VETTER Crane Technology PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual travel unit, and electric chain hoist. For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI crane system as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,100 mm Support distance L: 5,590 mm Support distance B: 5,100 mm Beam length: 6,170 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Bottom edge of crane bridge: 4,145 mm Bottom edge of portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/36/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Bedpfx Akez Sn Ddjtolp Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Travel unit / trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual travel unit SiCO-HF 2000 A Load hook Floor control Main switch Steel support and beam construction Inspection book available EC declaration of conformity available Documentation available Accessories according to pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Longest component: approx. 6.2 m Heaviest single component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of delivery VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual travel unit SiCO-HF 2000 A Support and beam construction Floor control / operating elements Main switch Inspection book EC declaration of conformity Documentation Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping possible. Subject to changes, errors and prior sale.

Condition: new, STRUERS Grinding and Polishing System Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Blsdpfx Akoz Srm Netep Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2023, Manufacturer: TEKA, Type: ZPF 9H, Year of manufacture: 2023, Serial no. A22341310061001, 22 kW, Exhaust/piping system, Dust collection container, Welding fume class W3 Blodpsz Tn Edjfx Aktjp +++ Subject to prior sale! +++ +++ Attention: This unit is part of an online auction! +++

Condition: excellent (used), functionality: fully functional, For sale is a well-maintained Holzkraft ASA 2403 mobile dust extraction unit. This unit is ideally suited for extracting wood chips and dust in carpentry shops, joineries, as well as hobby and professional workshops. Thanks to its high air flow rate of approximately 2,850 m³/h, the machine ensures reliable extraction at various woodworking machines. The mobile base allows the extraction unit to be used flexibly within the workshop. The unit is in used but well-maintained condition and is technically functional. Scope of delivery: Holzkraft ASA 2403 mobile dust extraction unit Base with rollers Filter bag Bljdpoz Smwqjfx Aktjp Chip collection bag Magnetic switch Transportation is possible for an additional charge! The machine will be inspected before sale. For used machines with a manufacturing year of 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes reserved. All information is provided without guarantee.

Condition: good (used), mileage: 2,29,090 km, power: 55 kW (74.78 HP), first registration: 03/2015, fuel type: diesel, tire size: 195/65R15, axle configuration: 4x2, wheelbase: 2,730 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro5, number of seats: 2, total length: 4,380 mm, total width: 1,810 mm, total height: 1,800 mm, loading space length: 1,760 mm, loading space width: 1,500 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 666 kg, Tare weight: 1269 kg, Gross vehicle weight: 1935 kg, Unbraked towing capacity: 680 kg, Braked towing capacity, center axle: 995 kg, Cab type: Single cab, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Lighting type: Halogen lamp, Engine power: 55 kW (74 hp), Number of cylinders: 4, Engine displacement: 1560 cc, Fuel: Diesel, Euro: 5, Drive technology: Timing belt, Transmission type: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, air conditioning, side door, spare wheel, Tire type: All-season tires = Additional Information = General information Number of doors: 1 License plate: VN-057-K Axle configuration Tire size: 195/65R15 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 1,269 kg Payload: 666 kg GVW: 1,935 kg Functional Loading area height: 58 cm Maintenance APK (Technical Inspection): valid until 03/2027 Bodjz S Ag Tspfx Aktelp Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1

Condition: used, functionality: fully functional, total width: 3,000 mm, total length: 1,800 mm, total height: 6,000 mm, Bag filter Dimensions: 3000 x 1800 x H 6000 Air flow rate m³/h: 10,000/13,000 No. 108 bag filters, L. 3000 Filtration area m²: 120 No. 02 explosion-proof ventilation panels Bsdpfozy R Shsx Aktjlp No. 01 motorized screw conveyor No. 01 star valve Ladder Excluded: - Fan - Electrical control panel - Piping in general

Condition: used, RMS   Vibration exciter / Vibration testing system   RMS SW 6005 Vibration exciter, sold exclusively as a source of spare parts   For sale is a used vibration exciter from RMS Regelungs- und Messtechnik.   The device is sold explicitly and solely as a source of spare parts. Its functionality has not been tested. Operational readiness or completeness is not guaranteed.   Technical data:   Bodpfx Akjz Iqigjtjlp Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Year of manufacture: 1983   Voltage: 30 V Current: 200 A Force: 11,770 N Vibration amplitude: ± 13 mm Velocity: 1.2 m/s Acceleration: 100 g   Weight: approx. 700 kg (estimated)   Equipment:   RMS vibration exciter SW 6005 Mounting surface with threaded holes Pneumatic vibration isolation Lateral spring elements Pneumatic components Control and connection housing Cooling/air connection with hose Transport/lifting eyes Solid base frame Existing mounting and supply components Accessories as shown in the pictures   Application areas:   Spare parts sourcing Maintenance of existing vibration testing systems Spare parts and assembly supply Rebuilding and repair projects   Scope of supply:   1 × RMS SW 6005 vibration exciter Existing mounting and supply components Cooling/air hose as shown in the pictures Accessories as shown in the pictures   Condition:   Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested   Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for functionality, operational readiness, or completeness.   Shipping or freight shipping possible. Subject to changes, errors, and prior sale.   We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Bedpfez Iql Iex Aktelp Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2001, Demag Ergotech 250/560-840 Euromap size: 2500-840 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (840) Screw diameter: 45 mm L/D ratio: 20 Injection pressure: 2402 bar Stroke volume: 358 cm³ Shot weight (PS): 320 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 80 kN Barrel heating power: 13.0 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Bedpfoz D Ttgox Aktslp Pump motor: 30 / 37 kW Total installed power: 43 kW (50 kW with electric screw drive) Dry cycle time (EUROMAP 6): System: 2.35 s – 392 mm / 2.25 s – 392 mm; Concept: 2.25 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 10700 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.1 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: good (used), Technical data for the pallet racking system: Racking system: Jungheinrich Type: Esmena Technical data for the installation: Number of racking rows: 1 Length per racking row: 53,433 mm Number of bays per racking row: 5 Number of levels including the base level: 2 Technical data for the capacity: Bjdpfx Aoz Ng E Ujktslp Pallet spaces per bay: 19 Number of pallet spaces per row: 228 Total number of pallet spaces: 288 Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in the scope of delivery: 20x Pallet racking uprights, used Material color: blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System hole spacing: 50 / 50 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) Height: 6,000 mm Depth: 1,100 mm 114x Pallet racking beam, used Material color: yellow Box profile: 116 x 40 mm Beam type: GNA 116x40 SEG5 Hook: 5 hooks Clear span: 2,707 mm Max. load per beam pair: 2,400 kg, with evenly distributed load. 228x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams to prevent unintentional lifting 80x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 20x Shimming plate, used Material: Fully galvanized For leveling the racking uprights that are installed on uneven ground 1x Load plate with information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mount DIN 69871 ISO 50 Overhang 358 mm Max. speed range 3000 rpm Max. drive power 22 kW Mounting flange: Outer diameter Ø 306 mm Dimensions L x W x H 460 x 306 x 360 mm Weight approx. 150 kg Accessories / Special features: Bjdez Adz Iopfx Aktslp • 2 pivoting axis system "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling and panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 2 weeks after order receipt The following work will be carried out during the partial overhaul: - 1 new gear pair - 1 new gear shaft - New bearings for the milling spindle and the gear shafts - New seals for the milling spindle and hydraulic tool clamping - New paint job The image is similar and shows a milling head that has already been overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: new, TRUMPF Femtosecond Laser System / Ultrafast Pulse Laser TruMicro 5070 Femto / TruMicro 5000 NEW / UNUSED – comprehensive laser system with system accessories For sale is a new and unused TRUMPF TruMicro 5070 Femto laser system with a TruMicro 5000 control/power unit and extensive accessories. The system was not used in production and comes from a project where the equipment was never put into operation. Technical data: Manufacturer: TRUMPF Laser GmbH Type: TruMicro 5070 Femto (FU06) Year of manufacture: 12/2018 Wavelength: 1030 nm Laser power: 300 W Pulse energy: 1.5 mJ Pulse duration: 0.3–15 ps Mains connection: 380–460 V / 3 AC + PE Bljdez I N Tkopfx Aktsp Frequency: 50/60 Hz Power consumption: 2.5 kW / 2.9 kVA Current consumption: 4.2 A at 400 V Protection class: IP54 Weight TruMicro 5070: approx. 380 kg Equipment: TRUMPF TruMicro 5070 Femto laser source TRUMPF TruMicro 5000 control/power unit Operator panel with emergency stop Industrial monitor TRUMPF control and electronics modules Beckhoff automation components Cognex component Optics and lens components Laser and light guide components Extensive power, control, signal and connection cables Pre-assembled connection cables Original TRUMPF documentation / manuals Further extensive accessories as shown in the pictures Application areas: Laser structuring Micromaterial processing Precision machining Industrial laser applications Research and development Scope of delivery: TRUMPF TruMicro 5070 Femto TruMicro 5000 control/power unit Control, electronics and optics components Cables, connection components and documentation Extensive accessories as shown in the pictures Condition: NEW / UNUSED NEVER USED IN PRODUCTION Storage and packaging marks may be present. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), Paper band filter with abundant nonwoven fabric SEITZ, type PFA 200 Blsds Afpyxopfx Aktep

Condition: excellent (used), functionality: fully functional, total height: 850 mm, overall weight: 30 kg, includes reference block and battery charger, plus 1 measuring tip Bljdpfx Akj Adklmstjp in very good condition

Year of construction: 2012, condition: excellent (used), Dust extraction system with Venturi wet separator Bjdpfx Ae Afbp Ejktslp • Manufacturer: Keller Lufttechnik • Type: VDN-E-3.6-Z5.5 • Year of manufacture: 2012 • Serial number: 1029002 1 1 • Includes accessories: Disposal bucket • Condition: Unknown Operating flow rate: 3,600 mm Drive power: 5.5 kW Water capacity: 440 l Diameter: 894 Height: 2,725 mm

Condition: used, Carl Zeiss Jena ULM 01-600C Universal Length Measuring Machine Manufacturer: Carl Zeiss Jena Model: ULM 01-600C Bodpfxj Ady Ike Aktolp Serial No.: 7104 Digital Readout: AE101 Description Carl Zeiss Jena ULM 01-600C universal length measuring machine with AE101 digital readout and a comprehensive set of original accessories. The machine comes from a former metrology environment and includes multiple fixtures, measuring attachments, tables, centers, and original storage boxes as shown in the photographs. The machine has been stored for a number of years and has not been tested recently. It is therefore offered in its current condition. Included Carl Zeiss Jena ULM 01-600C measuring machine AE101 electronic display unit Original measuring fixtures and accessories Various probes, supports, tables, and mounting equipment Original wooden storage cases Everything shown in the photos Stored unused for several years Not recently tested Sold as-is Calibration status unknown

Condition: excellent (used), mileage: 5,31,928 km, power: 352 kW (478.59 HP), first registration: 03/2016, fuel type: diesel, tire condition: 50 %, axle configuration: 8x4, wheelbase: 6,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 9,360 mm, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 11,500 kg, Equipment: ABS, crane, electric window regulation, = Additional options and accessories = - Brake assist system - Power take-off (PTO) - PTO - Radio/CD player - Stability control - Sun visor = Remarks = Crane Number of hydraulic extensions: 3 Remote control: × Rotator: ✓ Clamshell bucket: ✓ Very beautiful and unique MAN TGS configured as a Z-Crane/Hook Lift with WIERDE WIDESPREAD SYSTEM and driving system!! In addition to the options already mentioned, it features: -Automatic -8x4 -3 steering axles Bledpfxs Afhrmo Aktsp -Widespread -Load capacity 22800kg -Palfinger epsilon Q180 z 95 tap -18 to -9.5 meter extendable -High seat -DRIVING SYSTEM TO BE OPERATED FROM ABOVE THE HIGH SEAT!!! -Hook arm 30 tons -Air conditioning etc etc Original Dutch car directly from the first owner! = More information = General information Year of construction: 2016 Registration number: 53-BGZ-3 Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Axle configuration Front axle: Max. axle load: 10000 kg; Steering; Tyre profile: 50% Rear axle 1: Max. axle load: 10000 kg; Steering; Tyre profile: 50% Rear axle 2: Max. axle load: 11500 kg; Tyre profile: 50% Rear axle 3: Max. axle load: 11500 kg; Steering Weights Empty weight: 20.310 kg Carrying capacity: 22.790 kg GVW: 43.000 kg Max. towing weight: 50.000 kg Functional Crane: Palfinger Q180 Z 9.5 HOOGZIT, year of manufacture 2015, behind the cab Extendable superstructure: Yes Condition Technical condition: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), mileage: 88,359 km, power: 105 kW (142.76 HP), first registration: 05/2020, fuel type: diesel, wheelbase: 4,320 mm, fuel: diesel, fuel tank capacity: 71 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, loading space length: 4,290 mm, loading space width: 2,080 mm, loading space height: 2,400 mm, Equipment: ABS, AdBlue, USB port, air conditioning, airbag, central locking, electric window regulation, power assisted steering, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Outside temperature display - Heated side mirrors - Passenger airbag - Lighting in the cargo area - Hill start assist system - DAB radio - Electric front windows - EURO 6 - Driver airbag - Height-adjustable steering wheel - Light sensor - Emergency call system - Radio - Lane keeping assist - Insulated glass = Additional Information = General Information Year of manufacture: 2020 Cab: single Technical Information Number of cylinders: 4 Engine displacement: 2,143 cc Weights Unladen weight: 3,035 kg Bljdpox N R Nhefx Aktop Payload: 465 kg GVW: 3,500 kg Functional Tail lift: DHOLLANDIA DHLC.08, tailgate, 750 kg Height of loading area: 104 cm Maintenance APK (technical inspection): New TÜV (German vehicle inspection) upon delivery Condition Technical condition: very good Optical condition: very good Damage: none