second hand
Make Rück-Rückle
Motors 2 x 4.4 kW
Cutting width approx. 2500 mm
Cutting depth approx. 2200 mm
Cutting height approx. 120 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
Q9gmhizv
without guarantee and warranty
Stop for chop saw, pull saw ...
Cn3ykt03
-Recording: Bosch profile
-Length unit: 2000 mm
-Price: complete
-Dimensions: 2215/100/H1000 mm
-Weight: 10 kg
Technical characteristics
Pe9pz
cut of MDF WOOD and PVC molding at 45 °
double horizontal blades
inside rake angle Blade diameter: 300 mm Cutting thickness: 130 mm Cutting height: 100 mm Power and Motors
Overall dimensions
Length: 1400 mm Width: 1600 mm Weight: 500 Kg
9
Chop saw Cold circular saw
Manufacturer: MEP
Type: Cobra 350
Saw blade diameter: 350 mm
cutting diameter: 120 mm
Cutting area at 45 degrees: flat 135 x 60 mm
cutting range at 45 degrees: round 120 mm
Cutting range at 90 degrees: flat 180 x 70 mm
cutting range at 90 degrees: square 105 mm
Ylfuvkw
Machine weight approx. 0.6 t
Dimensions L x W x H 1600 x 800 x 1700 m
HAFFNER double miter saw with extraction
H8mq9fv
Double miter saw Rapid Model DGL 220 for cutting aluminum, wood and plastic profiles with automatic positioning of the saw heads.
Cutting length max - 7000 mm
Swivel range continuously motorized 20 ° to 135 °
Cutting height at 90 ° - 340 mm
Cutting height at 45 ° - 360 mm
Cutting width 170 mm
Saw blade diameter 2 x 500 mm
Saw blade speed 2800 / min
Reinforced motor power 2 x 3 kW
Pdxqd
Saw feed speed adjustable with oil brake
Spraying device
2 vertical clamps + 2 horizontal clamps and...
400 Volt Drehstrom-Bremsmotor 5,0 kW
Sägeblattdurchmesser 520 mm,
Sägeblattaufnahme 50 mm,
Itova0olc
Schnitthöhe 200 mm
Sägeblatt auf 45° geneigt: Schnitthöhe 140 mm,
Schnittlänge 420 mm,
mit Maschinenständer und Handkurbel hinten
zur Neigungseinstellung
Cross-cut and miter saw, pull saw, chop saw
-Motor power: 1 kW
-Speed: 2800 rpm
-Saw blade: 290 mm
-Cutting length: 300 mm
-Max. Cutting height: 80 mm
-Dimensions: 600/1160/H500 mm
Bexx7vjb38
-Weight: 76 kg
Technical characteristics
adjustable 0 ° -90 ° right / left
graduation with 0.25 / division
Bvs0l0uyh0
graduated ruler 1350 mm
compatible with TRK45, WA80, F90, F45 ALTENDORF Power and Motors
Overall dimensions
We bought this saw to cut PVC bead because the cut is very clean as the blades come down from the top we reconditioned this saw replaced all the bearings belts etc etc works and cuts very cleanly no bad edge
Picture framing guys guys use this model as well
We did not use it in the end we milled our bead instead its hard to get a saw with the blades cutting from the top but this dose and its in very good condition
Bvmrfulwix
Double blade mitre saw BREVETTI model B84
- with 2 blades at adju...
radial saw
Bvifyhjzm7
Max cutting height 120mm
Stroke 960mm
45 degrees
Horizontal and vertical cutting
Dimensions 1200*1400*1500mm (L*W*H)
Mitre saw for cutting sheet metal with variable angles, 30-135º, with display, blade length 200 x 200 mm, maximum thickness 4 mm.
Motor 4 Kw.
Dimensions L 1700x W 1000 x H 1500 mm.
Adjustments.
Bqmdjdxk
-Cutting depth, by means of potentiometer with digital display.
-Hydraulic clamping.
-Table with two slots in "T". (Dv8tni).
-Operation by means of electric pedal.
used, good condition, lots of accessories
Make Graule
Type ZS 85 N / S
Year of manufacture 1997
Machine no. 1997/1/15
CE-type tested
Motor 3.0 kW / 380 V / 16 A
Brake motor
Cutting height approx. 85 mm
Cutting length approx. 380 mm
Blade diameter approx. 300 mm
can be swiveled to the right up to 45 °
swivels left up to 45 °
tiltable up to 45 °
Machine base
Material system made of aluminum
Support table made of delignite wood
Lubricant spray device
Pneumatic workpiece clamping 1 piece
New price a...
Crosscut and miter saw, pull saw, miter saw, panel saw, miter saw, radial saw, radial arm saw
-on: stable base
-Motor power: 1.49 kW
-Speed: 3000 rpm
-Saw blade: Ø 250 mm
-Max. Cutting height: 80 mm
-Cutting length: 500 mm
-Saw blade is: tiltable up to 90°
-Dimensions: 840/700/H1390 mm
N0p8z
-Weight: 150 kg
Crosscut and mitre circular saw GRAULE ZS 170N
optically and technically very good condition
we sell this item on behalf of a customer, you will get a private bill of sale, no VAT will be charged
cutting height: 170mm at 90°
cutting length: 430mm at 90°
year of manufacture 2002
Jo7mei8n
can be swivelled on both sides, to the left up to 70° and to the right up to 45° with rasters at 90° and at 45° and with a very exact scale
can also be tilted, on one side up to 10° and on the other side up to 45...
* NEW * Stromab Universal crosscut and mitre circular saw * NEW *
- Very flexible to use and very easy to adjust.
- Guide arm rotatable to the left up to 60 degrees, and to the right up to 45 degrees.
- Fixed blocking positions left: 60, 45 30 15 and 0 (right) degree
- Fixed blocking positions right: 15, 30 and 45 degrees
- The guide arm rotates around its own zero point, therefore the measurement is the same for both straight and diagonal saws. Possible measurement indications are therefore alw...
2 heads swivel angle 45 degres length 6000MM
Bkan87rkfy
Technical data:
Cutting angle adjustment: 45 / 22.5
Saw diameter: 350 mm
Pneumatic pressure
Element width: 80 mm
Cutting height: 100 mm
Pioacom7
Extraction port: 2x115 mm
used, good condition
Make Graule
Type ZS 85 NS
Year of manufacture 1990
Machine no. 1990/01
Motor 2.2 kW / 380 V / 16 A
Cutting height approx. 85 mm
Cutting length approx. 380 mm
Blade diameter approx. 300 mm
can be swiveled to the right by 45 °
swivels left up to 45 °
tiltable up to 45 °
Machine base
Ebgo20r
Extraction connection D 80 mm
Required space approx. 800 mm x 1000 mm x 1400 mm
Total connected load approx. 2.2 kW
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in t...
Miter saw, saw unit right left, double miter saw, cross-cut and miter saw, double end profiler
-Double miter saw: saw unit right and left from automatic saw-drill / milling machine Rapid DGL / BFA
-Motor: Himmel 3.0 kW / 2790 rpm
-Saw unit: swivels 45 °
-Saw blade: Ø 410 mm
-Price / fee: complete
Bv890sg2ku
-Dimensions: 1060/760 / H680 mm
-Weight: 240 kg
RAPID double miter saw for cutting PVC and aluminum
- hydropneumatic saw feed
- Saw angle of 90 ° and 20 ° in 0.1 ° steps, infinitely variable
via motor, ideally suited for the construction of special elements
- Ferrocontrol control
- label printer
Bvxbkgciuu
Radial saw
Harwi 625 H
Year of construction 1996
2800 rpm
Weight 211kg
Saw blade max 400mm
Bu908ygkbw
Cutting height max 135mm
Height adjustment 95mm
3kW
400V
Cold mitre saw KALTENBACH type KKS 400 NA
operating instructions, documents, sealing rings available
Manufacturer's data:
Saw blade diameter 400 mm
Cutting range at 90° round Ø 130 mm
sawing range at 90° square 120 x 120 mm
Sawing range at 90° rectangle 305 x 20 mm
Cutting range at 45° round Ø 130 mm
Sawing area for 45° square 110 x 110 mm
Cutting range at 45° rectangle 245 x 30 mm
Clamping range of collet feed 30 to 140 mm
Working height 1000 mm
Mitre cut 0 - 180
Feed path 600 mm
Saw blade spee...
with roll conveyor
Ytjdpg
used, good condition
Make Graule
Type 85 NS
Year of construction 1995
Machine number 1995 = 5/8
CE-type tested
Motor 2.0 kW / 380 V / 16 A
Brake motor
Cutting height approx. 85 mm
Cutting length approx. 380 mm
Blade diameter approx. 300 mm
can be swiveled to the right by 45 °
swivels left up to 45 °
tiltable up to 45 °
Cxobcaywu
Material system made of aluminum
New price approx. € 3,100.00
Extraction connection D 80 mm
Space requirement approx. 700 mm x 1000 mm x 700 mm
Total connected load appr...
Miter saw, saw unit right left, double miter saw, cross-cut and miter saw, double end profiler
Bv2pkez27d
-Double miter saw: saw unit right and left
-Saw unit: swivels 45 °
-Motor: Bauknecht 2.5 kW / 2850 rpm
-Saw blade: Ø 400 mm
-Price / fee: complete
-Dimensions total: 1370/890 / H710 mm
-Weight: 250 kg
RAPID double miter saw for cutting PVC and aluminum
- hydropneumatic saw feed
- Saw angle of 90 ° and 20 ° in 0.1 ° steps, infinitely variable
Ig0i2mwog
via motor, ideally suited for the construction of special elements
- Ferrocontrol control
- label printer
Distance between saws at 90°max : 4000 mm
Cutting height at 90° : 200 mm
Vf2zkzs
Cutting with: 130 mm
Power: 5,1 kW
Weigth: 1260 kg
CATALOG NUMBER 6065
TECHNICAL DATA
- max diameter of the disc 400mm
- 30mm spindle diameter
- shields for shields 2 pcs
- pneumatic blade slide
- sawing aggregates adjustable at an angle of 45 °
- electric spacing of sawing units 0.18kW
- min cutting length at 90 ° 240mm
- max cutting length at 90 ° 3020mm
- cutting width 110mm
- cutting height at 90 degrees 150mm
- pneumatic clamps 4 pcs
- control pedal
- material support 2 pcs
- main engine 2x3kW
- dimensions length / width / height 3840x1100x...
We offer a used, functional mitre saw from OMS.
electric mitre saw with steel plate / cast iron
Setting the cutting depth with scale
diameter: 250 mm
Engine: 1,2/ rpm 3000 / 220V
Work table:
Ffkcdb88q
width: 69,5 cm
depth: 40 cm
height: 83 cm
Machine is offered on behalf of the customer
45 ° / 2 motors
second hand
ran little
Wegoma brand
Type GL 125 A (P)
Year of manufacture 1990
Machine no. 90117
Cutting height approx. 50 mm
Bpyorcdsu
Cutting width approx. 35 mm
Blade diameter 200 mm
Pneumatic saw feed
peum. Workpiece clamping 2 x
Foot control emergency stop
from location
Viewing possible by appointment
Miter saw, saw unit right left, double miter saw, cross-cut and miter saw, double end profiler
-Double miter saw: saw unit right and left
-Saw unit: swivels 45 °
-Motor: Bauknecht 2.5 kW / 2850 rpm
-Saw blade: Ø 420 x 30 mm
-Price / fee: complete
-Dimensions: 1200/800 / H690 mm
Bvxns9p9v0
-Weight: 234 kg
Do you have complex mitre angles to cut? We have full auto cutting solutions with automatic angle mitering whether you cut aluminium, timber or steel. Just enter the length and the angles you need and press GO. ProfiFeed automatic saw continuously produces your mitered parts accurately, and without any manual labour required, for any combination of angles required.
ProfiFeed Automatic Saws | Features
- Automatic material positioning and high-speed cutting to length.
- Automatic mitre angle ...
Distance between saws at 90°max : 4000 mm
Cutting height at 90° : 200 mm
Cutting with: 130 mm
Power: 5,1 kW
Weigth: 1260 kg
Bixflhhgwq
Crosscut saw
G2vy20d8a
Eisele
LMS 2
BJ 1972
380 V 16 A
Speeds 1700 - 3400 rpm
length 90 cm
width 50 cm
height 67 cm
Weight 60 Kg
incl.
hydraulic lifting of the saw frame with stop valve
Microdosing system
Bfsf8ddztw
Laser light for cutting line display
Metal band saw machine for straight and mitre cuts, infinitely variable from
30° - 45° - 90° - 45° - 30 ° according to scale
Center of rotation remains unchanged with every angle adjustment, thus exact
Length measurement at 90° and in the mitre area.
cutting speed: 35 u.75 m/min pole-changeable
Cutting area
30° left Ø 130 or 120x120
45° left Ø 200 or 180x180
90° Ø 260 or 30...
cutting range round 220mm
cutting range square 470mm x 30mm
Bsizxt823b
Cross-cut and miter saw, pull saw, chop saw
-Motor power: 1.03 KW
-Speed: 2800 rpm
-Saw blade: 180 mm
Qkrqrb0id
-Cutting length: 250 mm
Do you have complex mitre angles to cut? We have full auto cutting solutions with automatic angle mitering whether you cut aluminium, timber or steel. Just enter the length and the angles you need and press GO. ProfiFeed automatic saw continuously produces your mitered parts accurately, and without any manual labour required, for any combination of angles required.
Cwr9h9do
ProfiFeed Automatic Saws | Features
- Automatic material positioning and high-speed cutting to length.
- Automatic mit...
Make: Lescher
Bfjnjahe
Type: UK-500 L
Dimensions: approx. L 1.10 x 1.10 x H 1.60 m
Weight: approx. 300 kg
All information without guarantee.
A demonstration under power is possible at any time in our exhibition hall.
- dimensions and angles set from the desktop
- cutting at an angle and milling for lamello from one fastening
Bpvjzbtu0o
- new saws and cutters for lamellas
Metal circular saw (saw) serial. IPB Pedrazzoli type Brown master
Technical data:
Saw blade diameter 275 mm
Miter setting via rotation 0 – 45 ° left
2-blade speed 55 / 85 RPM.
Power 2.5 / 3 kW
Speeds motor 1400/ 2870 RPM
Dimensions W x D x H 1000 x 650 x 1800 mm
Weight approx. 200 kg
with
-on base
Nfa8xzxxy
Quick-action vise
-Fence
-Cooling device
-Saw blades
used, in good condition
Double mitre saw
Image
Technical data
Article number: MA917
Manufacturer: Elu
Type: DG 79
Year of construction: 1981
Machine number: 27184
Weight [kg]: ca. 550
Power supply: 380V / 2x2KW
Gear [RPM]: 2100/3800
3whvjh8d
Saw blade diameter: 330
Cutting range: 0-45 ° / 4500 mm length
Length stop: adjustable by hand
Accessories: Pneumatic clamping
disk of circular saw-Ø: 400 mm
0uys7z3n
cutting area at 90° round: 130 mm
cutting area at 90° square: 210 x 80 mm
cutting area in mitre at 45° round: 130 mm
cutting area in mitre at 45° square: 160 x 80 mm
cutting speed: 11/22 m/min
space needed: 2650 x 1450 x 1980 mm
weight: ca. 1100 kg
Do you have complex mitre angles to cut? We have full auto cutting solutions with automatic angle mitering whether you cut aluminium, timber or steel. Just enter the length and the angles you need and press GO. ProfiFeed automatic saw continuously produces your mitered parts accurately, and without any manual labour required, for any combination of angles required.
ProfiFeed Automatic Saws | Features
- Automatic material positioning and high-speed cutting to length.
- Automatic mitre angle ...
We carry the entire MEP range.
! You tell us your saw task and we will find your perfect machine!
Juuiva
Manual band saws for miter cuts from 0 ° to 60 ° left are also available in a version with HB device and allow an aufsichtslosen mode, as well as manual cutting (model 211 1 is the HB)
Device in three-phase version only available) HB-cut cycle-after the cut material is correctly positioned and the vise closed, the cutting process begins.
The cutting speed is controlled by the weight of the ...
saw
Miter with drilling
BALESTRIERI TECHNA PLUS 3001
Manufacturer BALESTRIERI
Model / machine type TECHNA PLUS 3001
Year of production 2006
Machine category Saw Plow
Mobile cutting head with positioning drive through motion units and electronic digital display. Slides consist of tempered guides and recirculating ball racks.
• 2 units with an O 400 blade - each unit is driven by a Kw. 3
• The capacity (radial system) of the rolling slide unit
• 2 support tables of components supplied with vertic...
Hydr. MITRE - metal circular saw cold semiautomatic Fabr. KALTENBACH type PPS 401 H
Masch. # 112710 year 1991
Technical data:
Blade size 375/400/425 mm
Cutting width of 5 mm
Cutting speed 10/20 m / min
Khhef9itj
Cutting capacity round 130 mm
90 ° square 120 mm
45° square 110 x 110 mm
90 ° flat 250 x 40 mm
45° flat 170 x 50 mm
Saegeblattvorschubgeschw. 0-1200 mm / min
Power 1.7 / 2.6 kW
External dimensions 1170 x 1070 x 1960 mm
Weight 1350 kg (machine only)
little used, in good condition
