➤ Used Cross Cut Miter Saw for sale 🏷️ on Machineseeker India ⚙️✔️

Listing

Wiefelstede

6,930 km

Cross-cut and miter saw can be swiveled up to 90°

Pressta Eisele LMS 350

Call

Condition: used, Year of construction: 2007, Crosscut and miter saw, pull saw, chop saw, aluminum circular saw, metal circular saw, metal cutting saw, underfloor circular saw with double miter -Manufacturer: Pressta Eisele, underfloor circular saw with double miter Huyohqs -Motor power: approx. 1.5 kW -Speed: approx. 2820 rpm -Saw blade: Ø 350 mm, swivels left 45° / right 90° -Cutting area: 90° flat 270 x120 mm -Cutting area: 45° flat 210 x 120 mm -Workpiece clamping: pneumatic horizontal clamping devices left and right -Cross stop: movable -Transport dimensions: 860/730/H1250 mm -Weight: 175 kg with pallet

more

Listing

Aalen

6,772 km

Cross-cut and miter saw

Graule ZS 265 N-K

Call

Condition: used, Year of construction: 2015, No. 04354 Cross-cut and miter saw GRAULE ZS 265 N-K Used, year of construction 2015 Few operating hours Cr8zi9p9x7 With pneumatic saw feed The saw blade is swiveled and tilted using an electric motor The cabin is opened and closed pneumatically using a foot pedal Special motor 1.6 kW, 1320 rpm The saw is suitable for cutting plastic and aluminum profiles Technical data: Saw blade diameter 650 mm, bore 50 mm Cutting area: Cross section 90°: 50 mm Miter cut 45°: 350 mm Cutting height at 90°: 265 mm Miter range horizontal: 45° - 90° - 30° Vertical miter range: 60° - 90° - 30° Suction diameter: 100 mm Electrical connection: 400 V, 16 A, 50 Hz Three-phase motor, with electro-mechanical brake Air pressure 6 – 8 bar Air requirement approx. 1000 liters/hour. Pneumatic material clamping cylinders Incl. special accessories: Saw blade for PVC and aluminum 650 mm Laser device (not mounted) Digital angle display Complete technical documentation Machine ready to plug in Transport dimensions approx. 1700 x 1800 x 2000 mm LWH Weight approx. 1000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold in AS IS condition Technical information, condition description, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is “bought as seen”. Terms of payment: Prices plus statutory. VAT, payment before collection or shipping Delivery conditions: ex warehouse or location

more

Listing

Gerolzhofen

6,761 km

Cross-cut and miter saw with machine stand

Graule Typ ZS 170 N (neigbar)

€6,166

Fixed price plus VAT

Call

Condition: new, Description: - Crosscut and miter circular saw with a maximum cutting height of 170 mm Coecvkbymm - Miter-adjustable machines in 2 levels - Stable gray cast iron construction - Precise ball bushing of the tool slide on hardened and ground steel shafts - Manual saw feed - Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically - Readjustable fixed stops at 90 ° and 45 ° - Lower saw blade protection can be connected to the suction system Scope of delivery: 1 x Graule crosscut and miter circular saw, type ZS 170 N including additional charge for 3 kW 400 volt motor 1 x machine stand for type ZS 135 N and ZS 170 N Technical specifications: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90 ° / 290 mm at 45 ° - Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2 - Horizontal miter range: 45 ° -90 ° -25 ° - Vertical miter range: 90 ° -45 ° (inclined to the left) - Saw blade Ø: 420 mm - Suction nozzle Ø: 100 mm - Weight: 120 kg

more

Listing

Aalen

6,772 km

Cross-cut and miter saw

Graule ZS 265 N-K

Call

Condition: used, Year of construction: 2015, No. 04354 Cross-cut and miter saw GRAULE ZS 265 N-K Used, year of construction 2015 Few operating hours With pneumatic saw feed The saw blade is swiveled and tilted using an electric motor The cabin is opened and closed pneumatically using a foot pedal Special motor 1.6 kW, 1320 rpm The saw is suitable for cutting plastic and aluminum profiles Technical data: Saw blade diameter 650 mm, bore 50 mm Cutting area: Cross section 90°: 50 mm Miter cut 45°: 350 mm Cutting height at 90°: 265 mm Miter range horizontal: 45° - 90° - 30° Vertical miter range: 60° - 90° - 30° Suction diameter: 100 mm Electrical connection: 400 V, 16 A, 50 Hz Three-phase motor, with electro-mechanical brake Cr8za8ah2c Air pressure 6 – 8 bar Air requirement approx. 1000 liters/hour. Pneumatic material clamping cylinders Incl. special accessories: Saw blade for PVC and aluminum 650 mm Laser device (not mounted) Digital angle display Complete technical documentation Machine ready to plug in Transport dimensions approx. 1700 x 1800 x 2000 mm LWH Weight approx. 1000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold in AS IS condition Technical information, condition description, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is “bought as seen”. Terms of payment: Prices plus statutory. VAT, payment before collection or shipping Delivery conditions: ex warehouse or location

more

Listing

Gerolzhofen

6,761 km

Cross-cut and miter saw

Graule Typ ZS 170 N (neigbar)

€5,520

Fixed price plus VAT

Call

Condition: new, Description: - Crosscut and miter circular saw with a maximum cutting height of 170 mm - Miter-adjustable machines in 2 levels - Stable gray cast iron construction Fly7j80es - Precise ball bushing of the tool slide on hardened and ground steel shafts - Manual saw feed - Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically - Readjustable fixed stops at 90 ° and 45 ° - Lower saw blade protection can be connected to the suction system Scope of delivery: 1 x Graule crosscut and miter circular saw, type ZS 170 N including additional charge for 3 kW 400 volt motor Technical specifications: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90 ° / 290 mm at 45 ° - Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2 - Horizontal miter range: 45 ° -90 ° -25 ° - Vertical miter range: 90 ° -45 ° (inclined to the left) - Saw blade Ø: 420 mm - Suction nozzle Ø: 100 mm - Weight: 120 kg

more

Listing

Gerolzhofen

6,761 km

Crosscut, cut-off and miter circular saw

Kaltenbach

€450

Fixed price plus VAT

Call

Condition: used, used make Kaltenbach saw blade diameter max 250 mm cutting range 80 x 80 / 20 x 160 motor 380 V place of storage 97447 Gerolzhofen, free loaded, unpacked Cb72w8o delivery in as-is condition as viewed, without warranty and guarantee

more

Listing

Mediniai Strėvininkai

5,912 km

Crosscut, cut-off and miter circular saw

Graule ZS 85

Call

Condition: excellent (used), Motor 220 - 240 V 1,6 kW cutting height approx. 85 mm Blade diameter approx. 300 mm You can call or write us. We can speak and write German and Russian. You can also send messages in English. Bwlgrmdrws

more

Listing

Ieriķi

5,952 km

Cross Cut saw for glulam

FORMA SIA Crosscut saw GL-800

€12,000

EXW Fixed price plus VAT

Call

workpiece height (max.): 300 mm, motor power: 11,000 W, workpiece width (max.): 800 mm, blade diameter: 800 mm, Condition: new, Technical characteristics Saw disk diameter (mm) 800 Saw disk electromotor capacity (kW) 11 Saw disk rotation speed (rpm) 1400 Pneumatic pressure (bar) 5 Shaving suction pipe d (mm) 150 Overall dimensions (mm) Dm3ixv Length 1020 Width 1950 At widest material, machine width 2650 Height 1800 Additional equipment Roller tables Stoppers

more

Listing

Uničov

6,275 km

Optimizing cross cut saw

Störi Mantel UKS 850

€20,000

ONO plus VAT

Call

Condition: not inspected (used), Year of construction: 2015, Automatic optimizing machine , never used, repair required, service list of required components available, available one machine for Left and one for Right side operation...cost is per unit(one machine), required repair at value 13 000 € Vwb0be

more

Listing

66140 Malax, Finnland

6,355 km

Cross-cut saw

€1,290

ONO plus VAT

Call

cutting height (max.): 110 mm, motor power: 3,000 W, overall weight: 320 kg, disc diameter: 350 mm, Condition: good (used), Year of construction: 1995, DEWALT radial arm saw Year of construction 1995 Saw blade diameter 350mm Spindle 30 mm Saw motor 4,0 PS ( 3,0kW ) Saw blade speed : 2800 /min Glzack miter angle : 45-90 ° maximum dimensions of the cut piece 80 x 700 mm maximum cutting height : 110 mm Maximum cutting length : 545 x 20 / 450 x 125 mm For a wide range of materials for cross-cutting work in solid wood, strips Overall dimensions 110cm x 95 x 140 cm (L x W x H). Weight : 230 kg Technical specifications subject to change

more

Listing

Hessisch Oldendorf

6,845 km

Cross-cut-saw with continuous feed

MS-Maschinenbau MAS-6-5-4

Call

Condition: new, Year of construction: 2023, - 6.000mm cutting length - min. cutting length 600mm - 5 saw supports - 80 - 140 mm cutting height - 4 KW saw motor Isr7zfa - 1,5 KW stepless feed 10-30m/min Optional - Disposal conveyor belts

more

Listing

Hardinxveld-Giessendam

7,147 km

Automatic cross cut saw (double angle)

H&M HM-Z-4

Call

Condition: good (used), Year of construction: 2005, H&M automatic cross cut line, type HM-Z-4 Manufacture year 2005 For straight & (double) angle cutting and equipped with milling unit Pxloua Consisting of: - Cross chain infeed system - Automatic push infeed, working length 6.3 meter - Industrial cnc controller - Milling unit cnc controlled - H&M cnc cross cutting machine, type HM-Z-4 Cross cut machine with 5,5 kW motor and saw blade Ø 700 mm. Angle adjustment 0 – 180 ° and incline adjustment 0 – 45 ° Z-axis adjustment 200 mm, max. cutting height 250 mm - Outfeed system with outfeed station

more

Listing

Randers

6,829 km

Double cross cut saw

EISELE FP400

Call

saw blade diameter: 330 mm, cutting capacity: 200 mm, feed length X-axis: 4,000 mm, cutting range round at 45°: 180 mm, cutting range round at 90°: 200 mm, total length: 460 cm, total height: 160 cm, total width: 100 cm, input power: 4.8 kW (6.53 PS), Condition: good (used), Double cut off saw for iron/steel/metal. 4 x pneumatic clamps 2 hand operated Bigtmeglzkk Central lubrication

more

Listing

Scheeßel

6,837 km

cross cut saw push table

ASP-Automation Elektronik 3000 - 3 TH

€2,900

Fixed price plus VAT

Call

Condition: not inspected (used), for fast, exact cross-cutting of several timbers at the same time, which can be placed next to and/or on top of each other, max. travel approx. 3.3 m, total table length approx. 4.15 m, total table width approx. 0.85 m, max. clamping height approx. 160 mm, max. timber width approx. 220 mm, positioning drive with 2 electric disc brakes, positioning slide can be swivelled upwards, with 2 pneumatic clamping tongs with 4 spring-loaded clamping fingers each from above, 10 clamping tines from below, for self-assembly on a cross-cut saw Cgxwupvzdx

more

Listing

Trzcianka

6,372 km

Double cross cut saw with drilling units

Wegoma SD26S4

Call

Condition: excellent (used), Year of construction: 2002, Double cross cut saw with drilling units brand - WEGOMA model - SD26S4 year 2002 Bf8rgheexx2 Basic technical data: 2.2kW motor disc diameter 500mm cutting speed 2800 RPM Dimensions : L500mm W1600mm H2000mm weight 930 kg machine connected to electricity with the possibility of checking at work I provide more information by phone or email

more

Listing

Egenhofen

6,695 km

cross-cut and mitre saw

Graule ZS 200N-F

€15,440

Fixed price plus VAT

Call

Condition: new, Year of construction: 2023, Depth of cut at 90°: 200 mm Depth of cut at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range horizontal: 45° -90° -25° Miter range vertically: 60° -90° -30° Sawblade diameter: 520 mm rpm: 2800 U/min Hgjffimw Motor: 5 kW motor brake: yes suction plant diameter: 100 mm weight: 490 kg

more

Listing

Hessisch Oldendorf

6,845 km

Cross Cut Saw

Paul 15 AP

€4,850

Fixed price plus VAT

Call

Condition: reconditioned (used), Year of construction: 1982, - 3 KW sawing motor - pneumatic mode of operation - 500mm cutting length -150 mm cutting height Cak0snsxvh - 1 used saw blade - machine workshop checked - Machine repainted

more

Listing

Hardinxveld-Giessendam

7,147 km

Cross cut saw

PAUL 16 AO

Call

Condition: good (used), PAUL cross cut saw, type 16 AO with in and outfeed roller conveyor Bctlrt

more

Listing

TRENNJÄGER PMC 6 (Blatt 460 mm) rund 150 mm

Mörsdorf

6,664 km

Long cut miter steel cold circular saw

TRENNJÄGER PMC 6 (Blatt 460 mm) rund 150 mm

€7,500

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 1989, Hydraulic horizontal long cut steel cold circular saw make TRENNJÄGER type PMC 6-N machine # 282, year of manufacture 1989 Gw3390q Technical data: Saw blade diameter 460 mm cutting length 650 mm carriage travel 855 mm cutting height 150 mm Cutting area at 90° 650 x 150 mm Cutting range at 45° 450 x 150 mm Cutting capacity round solid material 150 mm cutting capacity tube 150 x 7 mm Working height 850 / 950 mm Saw blade speed 16/32 - 20/40 - 25/50 rpm motor power 1,3/ 1,6 kW hydraulic motor 1,1 kW outer dimensions L x W x H 2300 x 1050 x 1900 mm weight 1500 kg with - full hydraulic control - 3 vertical hydr. clamping cylinders - infinitely variable miter adjustment on both sides - cooling device used, in very good condition current special price - as on stock free loading truck

more

Listing

Romania

5,627 km

CNC CROSS-CUT SAW

Paul GmbH C14_KE II

€1,59,000

EXW ONO plus VAT

Call

Condition: as good as new (ex-display), 1 INFEED BELT CONVEYOR, 4.5M/330MM 1 C14_KE II CNC CROSS-CUT SAW - 6 large diameter, precision hard-chrome plated bottom feed rollers with spiral-fluted or slightly knurled surface for accurate workpiece guidance, driven by a wear-resistant, maintenance-free and non-stretch timing belt - 6 top feed rollers coated with easily replaceable polyurethane segments, independently pressure-loaded via pneumatic cylinders, partly separately controlled, centralized mechanical roller height adjustment by a crank handle CRAYON MARK RECOGNITION 1 CONVERSION KIT - for a maximum cutting height of 150 mm, incl. 700 mm dia. TCT saw blade and flange Cjw8dlrxrk 1 EXTRA CHARGE FOR 11 KW MOTOR 1 TURBO FEED DRIVE - with maintenance-free AC servomotor and low-backlash planetary gear in reinforced design, max. output 28 kW, max. feed speed 250 m/min. (4.2 m/sec) 1 SEPARATE FAN FOR SERVOMOTOR 1 OUTFEED - 1 belt conveyor, 3.5m/330mm - 1 belt conveyor, 8.0m/330mm - 1 belt conveyor, 11.5m/330mm - 15 wiping ejector, str. 330mm 1 PARTIAL OPTIMIZATION SOFTWARE - Partial optimization - 60 cutting lists with 400 preset lengths each - Program/quality changeover via code lines, for 9 different qualities - Yield evaluation with 20 statistics - 10 sets of optimization parameters - Parameter profiles for order-related adjustmenUstorage of parameter settings - Import of cutting lists from network system or USB stick - Online connection to customer's office via network system - Simulation possibilities - Display of service information in plain text 1 LENGTH SORTING CONTROL 1 ELECTRICAL EQUIPMENT 1 ELEVATION

more

Listing

Barntrup

6,855 km

double cross cut saw

Hüllhorst DH 52

€4,800

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 1992, Doppelablängsäge Hüllhorst Mit drittem Sägeblatt Type DH52 Baujahr 1992 Schnittbreite maximal 3200 mm min. Schnittbreite 220 mm Schnittlänge (Länge der Auflageholme) 2500 mm Sägeblätter nicht schwenkbar Mit Vorritzer Elektrische Breitenverstellung Breitenanzeige mit Lupe Drittes Sägeblatt und Vorritzer im Tisch auf der linken Seite der Maschine Ohne Spaltkeil und ohne Vorritzsägeblatt passen Sägeblätter mit einem max. Durchmesser von 450 mm auf die Maschine, die Schnitthöhe ist dann maximal 125 mm. Djt8mz Bei Sägeblatt Durchmesser 350 mm ist die Schnitthöhe maximal 75 mm Hauptsägen Motorstärke je ca. 3,2 kW Vorritzer Motorstärke je ca. 1,5 kW Ladeabmessungen ca. L 5300 mm x B 2400 mm x H 1000 mm Gewicht ca. 2800 kg

more

Listing

Randers

6,829 km

CROSS CUT SAW LINE

OMGA FP3000

€6,500

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2003, Maximum cutting length( Pusher ) : 3000 mm Infeed table : 3600 mm Saw blade diameter : 450 mm Cju7sb7lqy Engine size : 5,5 Kw 2 hand operated Cable connection to extern computer Loading from right to left

more

Listing

Gerolzhofen

6,761 km

Cross-cut- and mitre circular saw

Graule ZS 135 N

€3,600

Fixed price plus VAT

Call

Condition: used, Year of construction: 1990, with roller table right and feed brake used, good condition Czwrybx0xo make Graule type ZS 135 N year 1990 motor 380 V 2 kW cutting height approx. 135 mm cutting length approx. 430 mm blade diameter approx. 350 mm saw blade bore approx. 40 mm swivels right up to 45° swivels left up to 45° tilts up to 45° machine base roller table right 3000 mm with stop and scale feed brake hydraulic material plant made of aluminium new price approx. 6.500,00 € suction connection D 100 mm space requirement approx. 120 mm x 80 mm x 160 mm storage place 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, without guarantee and warranty

more

Listing

Hardinxveld-Giessendam

7,147 km

Package cross cut saw

HOLTEC F-SHK

Call

Condition: good (used), HOLTEC package cross cut saw, type F-SHK Cswwjx300 - With STIHL chain saw HF-121 - Max. package 6 x 1.2 x 1.2 m - Digital read out for position - Manual cutting beam - Manual length positioning - 3 pc. tilting containers for waste

more

Listing

Oberkochen

(dealership location)

6,774 km

Cross cut saw

SALVAMAC Classic 50 Video

Call

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 4530x1000x1300 mm SALVAMAC CLASSIC 50 The semi-automatic miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Machine additionally equipped with: ----- 2 m infeed (to the right of the saw) with non-driven rollers: Painted steel frame with galvanized casters. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 350 mm. The space between the roles is encased in painted steel. Including lateral guidance. 2 m outlet (to the left of the saw) with non-driven rollers: Painted steel frame with galvanized casters. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 350 mm. The space between the rolls is from painted steel enclosed. Including lateral guide, stop guide and millimeter scale. 2 strong mechanical-pneumatic stops with a width of 200 mm ----- Total price ex works: on request! Cgw9b3uuet ----- Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)

more

Listing

Verl

6,901 km

solid wood lamella cross-cut saw

GreCon, Kupfermühle, Möhringer

€1,35,000

EXW ONO plus VAT

Call

Condition: ready for operation (used), Year of construction: 1999, This is a plant for the production of solid wood lamellas for glued wood panel production. The production process is roughly as follows: 1. Pre-planing of the boards on both sides (top/bottom) using a Kupfermühle Doin 605 copper mill 2. Automatic width measurement of the boards (Möhringer) 3. Automatic cutting of the measured boards into slats (currently slat width 40 + 50 mm) using a multi-rip saw CML 650T T700 4. Automatic transport of the cut lamellas to the GreCon cross-cut system 5. Waste strips from the multi-rip saw are sorted out manually and shredded with the help of a hydraulic cross-cutting press 6. 2-3 marker places, marking the mistakes with fluorescent chalk 7. Manual feeding of the marked lamellas onto the infeed belt to the cross-cut system 8. Optimized cutting of the lamellas with GreCon OptCut 704 R 9. Ejection of the cut lamellas at one of the 14 ejector positions (ejection to the left in transport direction) 10. Transport of the leftover trimmings behind the cross-cut system back to the disposal container Vxxmgi Total length of the system approx. 65 m The system is still connected and could be visited at any time. Without dismantling, ex works. Would the facility be of interest to you?

more

Listing

Klipphausen

6,545 km

Optimization cross-cut saw

WEINIG / DIMTER OPTICUT S 60 wFlex+

Call

Condition: excellent (used), Year of construction: 2011, Cutting height max 225 mm Infeed length max 6.000 mm Number of ejectors 8 Wood defect cutting Chalk line scanner Control DIMTER OPTICOM PRO Software WEINIG OPTIPAL PRO, WEINIG OPTIPAL PLUS, WEINIG OPTIPAL Cutting width min 40 mm Cutting width max 300 mm Cutting height min 12 mm Saw blade diameter max 700 mm Main motor power 13,5 kW Feedrate max 60 m/min Continuously variable feed Bdldpfh7qv8 Programmable pusher Positioning unit with pivotable pusher List cutting Yes Workpiece width measuring Workpiece length measurement Waste conveyor Waste chute Yes Automatic feeding Cross conveyor Printer Yes CE marking Declaration of CE-conformity Space required Length 21.170 mm Width 4.900 mm WEINIG wFlex+ DIMTER Automatic rough board identification WEINIG Detaching device

more

Listing

Randers

6,829 km

HEAVY DUTY ALUMINIUM CROSS CUT SAW LINE

TEKNA TK133 CNC

Call

Condition: good (used), Year of construction: 2002, TEKNA TK 133 CNC: Cutting width Max : 175 mm Cutting hight Max : 340 mm Sawblade diameter : 500 mm Engine size : 2,2 Kw / 2800 rpm Head powered double tilting -45/90/22/30 degree 2 x pneumatic clamps to hold item Csmoagbkvk Machine weight : 450 Kg TEKNA infeed 4000 mm with digital pusher TEKNA 4000 mm manual outfeed rolls Machine can be examined in working condition

more

Listing

Barntrup

6,855 km

Double side cross cut saw with drilling

B & S

€4,800

Fixed price plus VAT

Call

Condition: good (used), Double side cross cut saw with drilling units Producer: B & S Sondermaschinenbau Brinkmann Bad Oeynhausen Krmcl8bb cutting length 2000 – 2500 mm cutting height max. approx. 80 mm material width max. approx. 150 mm material height max. approx. 60 mm 2 carbide tipped sawblades diameter 300 mm diameter of the sawspindle 30 mm cutting movement of the saws pneumatic vertical from top to bottom 2 saw motors each 2,4 kW 2 drilling motors each 1,5 kW each with 3 drills drilling movement pneumatic horizontal from outside to inside pneumatic material clamping 2-hand-operation at the switch cabinet positioned in the middle of the machine 2 connections for dust suction pipes diameter 100 mm height adjustable machine feet Machine was used in the production of beds, bed sides were cut to length and the drills did bore into the two head sides. overall size: L 4250 mm x W 800 mm x H 1500 mm weight approx. 800 kg

more

Listing

Marciszów

6,368 km

Cross cut saw UKS 700

Störi Mantel UKS 700

€24,000

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2012, I am selling a UKS 700 from 2012, the machine consists of: - feeding table, - saw, - receiving table, - waste receiver Machines in very good condition, serviced regularly in constant use. Dlul29 Price: PLN 110,000 net / 24 000€

more

Listing

Oberkochen

6,774 km

Cross cut saw

SALVAMAC Classic 50 mit Salvastop Video

Call

Condition: new, Year of construction: 2022, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC CLASSIC 50 The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - New machine from our demonstration room, Bj. 2022 Cgw9czifaw Pos. 1: Classic 50 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_50 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 350 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE

more

Listing

Scheeßel

6,837 km

hydraulic cross cut saw

Paul 15 AO

Call

Condition: reconditioned (used), max. cutting height 150 mm, max. cutting width approx. 550 mm at 50 mm height, saw motor 5 HP, automatic clamping and guard device, incl. new two-handed push-button control, incl. switch cabinet, new CV-saw blade or carbide tipped saw blade 500 mm Ø, 2 sawdust suction nozzles 3wvmbqji

more

Listing

Szendehely

6,102 km

Revolving cross cut saw

AVOLA gama 65 v

€16,000

Fixed price plus VAT

Call

Condition: like new (used), Year of construction: 2006, Carpenter's circular saw in mint condition. Digital size marking on the ruler. can be tilted and rotated! The diameter of the circular saw blade is 650 mm. Bbgqybdulaj

more

Listing

Randers

6,829 km

HEAVY DUTY CROSS CUT SAW

ELUMATEC DG 104

€14,000

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 1994, Automatic positioning with digital display 3z8fkxnhj Automatic tilt 90 - 45 degree Automatic angle 90 - 45 degree Programming with memory 2 hand operated cutting width 280 mm Cutting height 150 mm Motor output 2 x 4,0 kW saw blade 420 x 30 mm Cutting length 5000 mm speeds 2800 U/min air pressure 7 bar weight of the machine ca. 1650 kg

more

Listing

Barntrup

6,853 km

Profile Cross Cut Saw / Mitre saw

Hüllhorst KLS

€12,500

FCA ONO plus VAT

Call

Condition: ready for operation (used), Year of construction: 1994, Profile Cross Cut Saw / Mitre saw make Hüllhorst Type KLS pivoting crosscut saw, previously used for profile strips and crown profiles Input length max. approx. 4000 mm Outfeed table Length 3000 mm Saw cross section max. approx. 160 x 110 mm (WxH) Pivoting range infinitely variable, +/-45 degrees Saw motor 4,4 kW Speed 120 - 4,200 rpm Positioning speed max. approx. 60 m/min 2x 80 mm intake manifold Control: Ferrocontrol Cutting accuracy +/- 1/10 mm Dimensions: approx. 9000 x 1300 x 1500 mm (LxWxH) Dlsewz Machine completely checked and cleaned. Among other things, a frequency converter and a control unit were renewed.

more

Listing

Lohkva

5,910 km

Double cross cut saw

Multiple manufactures

Call

Condition: like new (used), Self made saw to cut pressed plywood edges. Ohmelky9

more

Listing

Jonava

5,929 km

20-28-537 Cross-cut saw (new)

MJ640

€1,490

Fixed price plus VAT

Call

Condition: new, Year of construction: 2019, Type MJ640 Motor power 2,2 kW Blade diameter 300 mm Motor spindle 25 mm Max trimming capacity 640 mm Mus3kw Depth of cut with motor at 45 80 mm Depth of cut 90 mm Table size 1020х810 mm Saw angle 0 +45 -45 Transport dimensions 1020x1200x1400 mm Weight 160 kg

more

Listing

Barntrup

6,855 km

autom. Cross-Cut Saw

STROMAB TR 450 MATRIX

Call

Condition: new, Year of construction: 2023, TR 450 MATRIX cross-cut system with automatic cutting cycle by input on the control panel or by cutting list Input material: single or stacked material with fixed length Applications: Production of pallets, packaging, furniture and garden furniture. cross section: mm 25x330, 40x310, 60x290, 85x277, 95x265 Min. workpiece thickness 10 mm (with automatic loader 20 mm) Working table inclined 8 Technical characteristics of the sawing unit: Pneumatic sawing unit TR450 Motor power 5,5 HP (4 kW) HM saw blade diam.450 mm., F=30 Z=72 S=4,2 Technical characteristics of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT feed by rack and pinion system and brushless motor Positioning accuracy +/- 0,4 mm Powerful feed motor for a package weight of 80 kg Maximum feed speed 90 m/min Pneumatic lifting of the pusher at the end of the cutting cycle and overhead return Data input management: 12-inch TOUCH SCREEN controller (800x600 pixels) USB connection Ethernet port LINUX operating system Loading and saving machine parameters via USB port Programming of the cutting cycle 'directly at the input terminal Transfer of cutting lists from office PC via USB or Ethernet Working software: Manual input of raw part length Part optimization without length readout of the blank Cutting cycle with 3 optimization options (Maximum length, sequence and edge sequence) 1000 cutting lists with 10 sizes or one list with 10000 sizes in sequence Optionally available: #ZA250 Package "OPTI" - automatic plate length detection and full optimization Blank length detection via photocell Cutting cycle with 6 optimization criteria: (Longest length, sequence, scantling sequence, volume, minimum waste and priority length). #ZA251 Package "OPTI PLUS" - Elimination of knotholes and defects Photocell for reading knotholes and defects Marking with fluorescent chalks/crayons (Note: Can only be ordered in conjunction with ZA250) #ZA109 Pneumatic side clamp #ZA110 Outfeed flat table #ZA119 Electronic flap for trimming and waste ejection after the saw line (Not available with automatic sorting unit ZM130) #ZA057 HM saw blade Ø 450 mm. #ZA085 Motor with 7,5 hp. # ZA080 Extended feed system length over 6000 mm. # ZA269 M Monitor outfeed side 7 inch #ZS004 Program adapted by the manufacturer, which can can create a cutting list on the PC Automatic loader for blanks (on request) Ccnhjmpb Label printer (on request) For a larger cross section we can offer alternatively to the TR 450 MATRIX we can offer the TR 500 MATRIX with 7,5 PS saw motor in standard

more

Listing

South Australia, Australia

8,323 km

Cross Cut Log Saw

Vesto

US$20,000

EXW Fixed price plus VAT

Call

Condition: good (used), Included with the machine is: - Hold-down clamps - Hydraulic pack Bexlghpdfhe - Electrical box - Driven roller

more

Listing

Randers

6,829 km

Heavy duty Cross cut saw line

STROMAB TR 600 MATRIX

€33,500

Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2019, Infeed : 6000mm Outfeed table : 3000mm 12"Touch screen graphic display Power 1000 controller Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. 5 optimising criteria - longest size, minimum waste, priority size, by volume or by value. Cutting list entered via controller key pad Graphic description of the workpiece. 10hp motor Rack & pinion drive system for pusher with magnetic reading strip to give a high level of repeat cutting accuracy 600mm diameter blade Dqtypgo2h Cutting capacity - straight - 160mm high by 310mm wide or 80mm by 390mm Cutting capacity - 45 deg - 160mm x 220mm, 80mm x 270mm Cutting capacity - 70 deg - 160mm x 100mm, 80mm x 130mm Angle setting -70 degrees, 0 degrees, + 70 degrees Adjustable saw stroke speed Vertical clamping Horizontal clamping Dust extraction 3 off 100mm, 1 off 120mm. Plexiglass hood with gas springs CE Marked All manuals/electric diagrams included Ask for WHATSAPP Presentation of the machine

more

Listing

Loštice

6,288 km

Cross-cut saw

Störi Mantel UKS 850 OPTIM

€79,000

EXW ONO plus VAT

Call

Condition: like new (used), Year of construction: 2019, Operating hours: 7,853 h, machine/vehicle number: 21985009, Powerful optimizing saw UKS 850 OPTIM for optimization (defect cutting) and precise material cutting with a wide cutting diagram. The material (single pieces or in a bundle) is positioned in the cut by means of a tie bar. Input and subsequent selection of cutting lengths via touch screen. Control is provided by a powerful industrial computer. High accuracy of material positioning.  Motor: 11kW/ 15kW  Saw blade diameter: 600-800 mm  Max. cutting height: 210 mm  Material feed accuracy: +-0.5 mm  Material feed speed: 120 m/min  Extraction: 2 x 120 mm - 30 m/s  Working height: 850 mm  Infeed table length: 5.2 m  Electricity connection: 400 V/3/50 Hz  Integrated touch panel: YES Ckknzvyvsd  Control software: SM OPTIMAL

more

Listing

Karsin

6,294 km

Cross-cut saw Optimizer OMGA

Omga t421

€9,000

Fixed price plus VAT

Call

Condition: like new (used), Year of construction: 2006, Max disc diameter 400mm Year of manufacture 2006 Sye7k2i3 2.2kW motor Cut size chart in the last photo

more

Listing

Jonava

5,929 km

20-28-536 Cross-cut saw

MJ930

€1,590

Fixed price plus VAT

Call

Condition: new, Year of construction: 2019, Type MJ930 Motor power 2,2 kW Blade diameter 300 mm Motor spindle 25 mm Max trimming capacity 930 mm Depth of cut with motor at 45 Depth of cut 90 mm Table size 1150х1020 mm Saw angle 0 +45 -45 Transport dimensions 1500x1100x1450 mm Weight 180 kg Bgtbawqxwr

more

Listing

Barntrup

6,855 km

Table Cross-Cut Saw

STROMAB TR 501

Call

Condition: new, Year of construction: 2023, Saw blade feed pneumatic motor power 7,5 KW crosscut cross section max. 280 x 135 mm, or 360 x 55 mm complete with: * 1 mtr. working table each left and right of the saw blade * beveled plate behind saw cut for removal of trim cuts * 2-hand operating device * front saw blade guard * carbide saw blade Djv0ov Optionally available: * Front guard pneumatic (TR501/P) * Upper guard cutting area (TR501/G) * additional roller table per mtr (with roller 60 mm) * manual stop 60 mm * manual stop 250 mm * pneumatic stop 60 mm * pneumatic stop 330 mm * carbide saw blade * laser guide light 220 V

more

Listing

Gorzów Wielkopolski

6,448 km

Cross-cut saw Stromab TR500+Matrix 6000

Stromab TR500+Matrix 6000

€41,000

FCA ONO plus VAT

Call

Condition: new, Year of construction: 2023, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Cu3mo7n0 Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

more

Listing

Karlholmsbruk

6,477 km

Circular Saws

Omga Cross cut saw T 55 300

Call

Condition: used, Year of construction: 1996, Manufacturer: Omga Model: T55 300 Year of manufacture: 1996 Cross cut saw Omga T55 300, complete with frequency driven and table - Manufacturer: Omga Em8zvxw9 - Model: T 55 300 - Year: 1996

more

Listing

Saccon

6,595 km

Push-feed optimizing cross-cut saw

Salvador Superpush 150

Call

Condition: new, Year of construction: 2023, Semi-automatic optimising crosscut saw with electronic positioner with push/stop mode COSTCUTTING OPTIMIZING SAW Superpush 150 is the centre for the cutting and entry level optimisation. It is designed as the true technological evolution of traditional cutting methods, able to increase productivity and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Horizontal plane with mobile protection to favour the loading of the work piece. Carriage with custom-made stop function and pusher. Linear unit composed by toothed belt with steel cables inside and sliding guide with linear bearings. Horizontal and continuous piece deposit plane with width mm. 300. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a touch screen panel with integrated NC. Software running on Linux with customized interface. Colour display 15,6”, resistant TOUCH SCREEN for a complete safety in industrial environments. Programs import via USB Possibility of Tele-service through internet. + Macro Excel. FAST Software S4U Lite Brushless positioner motor with digital servo-driver. Quick selection interface Stop/Pusher Adjustable cutting speed. RELIABLE AND SAFE Movements with sliding bearing with double anti-dust protection. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Two-handed safety manual control. Machine certified "CE" by the Certifying Agency, not self-certified. Bh0gbvf

more

Listing

Karsin

6,294 km

Cross cut saw STORTI TGS 78

Storti tgs 78

€20,000

Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 1984, Blade diameter: 550 mm Minimum cutting length: 500mm Minimum cutting width: 100mm Maximum cutting height: 160 mm Minimum cutting height: 40mm Pneumatic clamps Gf3kaxp

more

Listing

Barntrup

6,855 km

Automatic Cross-Cut Saw

STROMAB WS.1

Call

Condition: new, Year of construction: 2023, For cutting fix lengths and defects cutting cycle: Imperfection caps by chalk marking cutting with fixed lengths, standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths for single piece loading WS.1 throughfeed miter saw 4 pcs. Lower feed rollers 1 pc Loading table 2 mt. Right with double marking table 1 pc outlet table 1 mtr. With rear stop Manually adjusted height of the rollers 12 pcs. Luminescent Chalk cutting capacity: Item A: 130x175mm, 120x200mm, 100x230mm, 85x250mm, 15x305mm Pos. B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control with: Color touch screen 7" Processing cutting cycles directly on the machine Programming variants: - Imperfection caps by marking - Work with cutting list consists of 10 dimensions, possibility of repetition for Ha2lz9tpu each dimension and total quantity of each dimension 100 memory locations for cutting lists Recognition system of the last two pieces to be cut and the following piece Electronic control of the sorting unit with No.1 ejection kicker (ejection kicker optional) Technical characteristics: Feed system, motorized adjustment, brushless and toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm. HM blade diameter 500 mm. Motor power 7.5 kW Cutting speed per minute up to N°100 Minimum bar length mm.550 Minimum bar width mm.40 Minimum workpiece thickness 15 mm

more

Listing

Saccon

6,595 km

Push-feed optimizing cross-cut saw

Salvador Superpush 200 optimus

Call

Condition: new, Year of construction: 2023, Push feed optimizing saw for the complete optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Superpush 200 is a true technological evolution of traditional cutting methods. It is able to increase productivity considerably, reduce staff usage to a minimum, and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Special 30° inclined plane to favour the loading and keep the work piece squared. Pusher carriage dimensions mm. 300x345x25. Toothed belt width 50 mm. with 33 steel strips inside. Horizontal deposit/marking plane with width mm. 300. 0m2j09v2 TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows. Complete with 5 qualities managing. 19” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Total optic system. Brushless servo driver motor for the pusher. Intelligent pressure beam. Adjustable cutting speed. RELIABLE AND SAFE Transmission system with sliding on double hardened and rectified guides. “Skf” sliding bearing with double anti-dust protection and automatic lubrication. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Safety closing protection on back side.

more

Filter results

Sell cross cut miter saw now

from €2.99*

Inform now +44 20 806 810 84

Used Cross cut miter saw for sale (20,636)

Sort results

Pressta Eisele LMS 350

Graule ZS 265 N-K

Graule Typ ZS 170 N (neigbar)

Advertise now from €2.99* 10 million buyers are waiting for you

Graule ZS 265 N-K

Graule Typ ZS 170 N (neigbar)

Kaltenbach

Graule ZS 85

FORMA SIA Crosscut saw GL-800

Störi Mantel UKS 850

MS-Maschinenbau MAS-6-5-4

H&M HM-Z-4

EISELE FP400

ASP-Automation Elektronik 3000 - 3 TH

Wegoma SD26S4

Graule ZS 200N-F

Paul 15 AP

PAUL 16 AO

TRENNJÄGER PMC 6 (Blatt 460 mm) rund 150 mm

Paul GmbH C14_KE II

Hüllhorst DH 52

OMGA FP3000

Graule ZS 135 N

HOLTEC F-SHK

Trust Seal

SALVAMAC Classic 50 Video

GreCon, Kupfermühle, Möhringer

WEINIG / DIMTER OPTICUT S 60 wFlex+

TEKNA TK133 CNC

B & S

Störi Mantel UKS 700

SALVAMAC Classic 50 mit Salvastop Video

Paul 15 AO

AVOLA gama 65 v

ELUMATEC DG 104

Hüllhorst KLS

Multiple manufactures

MJ640

STROMAB TR 450 MATRIX

Vesto

STROMAB TR 600 MATRIX

Störi Mantel UKS 850 OPTIM

Omga t421

MJ930

STROMAB TR 501

Stromab TR500+Matrix 6000

Omga Cross cut saw T 55 300

Salvador Superpush 150

Storti tgs 78

STROMAB WS.1

Salvador Superpush 200 optimus

We make it easier for you to find: "cross cut miter saw"

Used Cross cut miter saw (20,636)

This may be of interest to you

Advertise now from €2.99* 10 million buyers are waiting for you

Machineseeker Trust Seal

What is the trust seal?

What do we verify?

What does this mean for you as buyer?

Inform now
+44 20 806 810 84

Advertise now from €2.99*
10 million buyers are waiting for you

Advertise now from €2.99*
10 million buyers are waiting for you