Used Circular Kneading Machine for sale (64,463)

Condition: new, Year of construction: 2025, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T411592, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,410 mm, saw blade diameter: 3,150 mm, cutting length (max.): 3,200 mm, Equipment: scorer, F25 basic configuration - Manual height and tilt adjustment of the saw blade from 0 to 46°, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Angle mitre fence, cross cuts up to 3,450 mm - Saw blade diameter max. 315 mm, saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Equipment package Type 4 Fodpfx Ajwwuamedajfw - 5.5 kW (7.5 HP), 2 speeds - Parallel fence Digit – X, 1,410 mm - Large extraction hood (PSV) - Scoring unit Basic with LED lighting

Condition: good (used), Used panel saw Metabo PKU 250/2 in good condition Technical data Machine table: 810 x 345 mm Working height - with stand: 890 mm - without stand: 370 mm Cutting height 90/45°: 83 mm / 48 mm Cutting speed: 57 m/s Max. cutting width - with parallel fence: 800 mm Saw blade Ø 250 x 30 mm Saw blade tilt range: -1.5 – 46.5° Speed: 4,400 rpm Mains voltage: 230 V Rated input power: 2.1 kW Output power: 1.6 kW Extraction connections: 100 mm / 82 mm Fodpewu T D Eefx Adaefw Used, only what is shown in the photo is included in the sale.

Condition: used, technical data to follow Ffodpfx Adjml H Noaow

Condition: new, Year of construction: 2024, functionality: fully functional, power: 5 kW (6.80 HP), cutting height (max.): 200 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder - On/Off switch on the double roller carriage - Front support roller Ffsdpfeuh R R Ejx Adajw

Condition: used, Year of construction: 2004, saw blade diameter 360 / 425 / 460 mm Fodpfx Adjv Nq Rtsasfw cutting diameter 10 - 140 mm cutting speed 25 - 160 m/min total power requirement 35 kW weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Condition: used, Year of construction: 2016, saw blade diameter 360 mm cutting width at round material 15 - 100 mm cutting width at rectangle material 15 - 80 mm cutting speed 17 - 175 m/min Control Easy Control KASTO Fsdpfx Ajv Nq Rmodasfw total power requirement 21 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 3,3 x 1,6 x 2,2 m The saw blade drive gearbox was renewed in 03/2023 by the manufacturer Material feed Material discharge Chip conveyor

Condition: new, power: 7.5 kW (10.20 HP), Equipment: scorer, Net price: €10,500 - Scorer - Saw blade tilt and height adjustment are manual - Cutting height 200mm - Scoring device with separate drive motor - Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹ - High dead weight ensures vibration-free operation - Large extension table with material roller - Parallel fence with round bar guide - Extendable aluminum longitudinal fence with two folding stops - 7.5 kW powerful main motor mounted on a robust cast iron frame - Four-times-cushioned sliding table made of anodized aluminum with high torsional rigidity - Multiple locking on sliding table - Standard with table extension and table extension made of thick plate - Large swing guard hood easily swivels up using a gas spring - Saw blade clamping via tool-free rapid system + Extraction connection Extraction port diameter: 120mm Fodpfx Adewf Ndcjasfw Extraction port diameter for saw guard: 80mm + Electrical data Connection voltage: 400V Mains frequency: 50Hz Nominal power consumption: 8.3kW Output power: 7.5kW + Sliding table and table Sliding table length: 3200mm Sliding table height: 890mm Table height: 890mm + Circular saw unit Cutting width with parallel fence: 1450mm Max. cross-cutting width left of saw blade: 3200mm Saw blade tilt: 90 – 45° Max. cutting height 90°: 200mm Max. cutting height 45°: 140mm Saw blade diameter: 550mm

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 150 mm, cutting width (max.): 1,000 mm, cutting length (max.): 3,200 mm, table length: 3,200 mm, Basic Configuration - Electrically powered height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Control panel at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Max. saw blade projection 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3,000/4,000/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Control System - Electrically powered height and tilt adjustment, also on both sides (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electrically powered adjustment of the parallel fence* - Electrically powered adjustment of the CNC miter fence UNO 90* - Automatic size correction on the parallel fence and angle fence when tilting the saw unit - Digital speed display or stepless speed control (VARIO)* - Electrically powered adjustment of the scoring unit, two or three axes* - Stepless fine adjustment of the axes via +/- buttons - Control of vacuum clamping in the double roller carriage* - Easy axis calibration - Machine diagnostics - Operating hours counter - USB interface - Recall of the last dimension entered (back function) - 99 storable cutting programs - Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete - Automatic conversion from peak to blunt measurement on the parallel fence and angle fence, taking material thickness and tilt angle into account - Compound angle cut function with automatic calculation of missing angles or dimensions - Advanced tool management · Storage of the scorer position (3-axis scorer)* · Saving of main blade thickness and cutting width · Saving of main tool speed · Max. 100 storable tools - Additional functions · Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete · Chain dimension function: cutting sequences with identical distances on the parallel fence, calculated on both sides of the saw blade · Angle cut: by trimming the oversize, the desired finished size is produced after entering the edge angle · 999 storable cutting programs *optional accessories The following options are included: - Pattern holder - Extended cutting height incl. tilting - Motor 5.5 kW (7.5 HP) VARIO - 2-axis scorer unit - LED lighting - Double roller carriage with a length of 3,200 mm Fsdpfx Aoxuquledaofw - On/Off switch on double roller carriage - Digital miter fence Digit L - CNC parallel fence 1,300 mm - Front support roller - Duplex 1350

Condition: used, Year of construction: 2024, functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 154 mm, cutting width (max.): 1,000 mm, saw blade diameter: 450 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,000 rpm, overall weight: 1,200 kg, pivoting range: 45 °, Equipment: motor brake, scorer, with Prodrive control system Scoring unit with LED lighting with CNC rip fence Crosscut fence with digital display Table extension: 840 mm Angle-mitre fence DIGITAL Machine height: 910 mm 2-axis scoring unit with swivel Automatic dimension correction on rip and angle fence when swiveling the saw unit Easy axis calibration Machine diagnostics, operating hours counter, USB interface Recall of last input dimension (back function) Fsdpfx Asxl Ti Tedaefw 99 storable cutting programs Further technical data Extraction port: 120 / 80 mm Outrigger table: 1200 mm Speed: 3000 / 4000 / 5000 rpm Sliding table: 3200 mm Height adjustment: electric Angle adjustment: electric Safety device: overhead guard

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), cutting height (max.): 105 mm, cutting width (max.): 2,100 mm, saw blade diameter: 350 mm, total length: 4,300 mm, The FIMAL CONCEPT 350 ELITE is the further development of the proven CONCEPT 350 PLUS, setting new standards in precision, safety, and efficiency. With a reinforced machine base, optimized extraction system, and a redesigned Multistop fence table, it offers even greater comfort and performance for joiners, furniture makers, and industrial panel processing. Thanks to its pressure beam with automatic feed, the ELITE combines the flexibility of a sliding table saw with the cutting quality of a pressure beam saw – all within a footprint of just 28 m². Technical Specifications ⦁ Aluminum machine and extension tables ⦁ Saw unit tiltable up to 46° ⦁ Pressure beam, including LED lighting with 3 different action colors: WHITE: Machine in stand-by RED: Pressure beam lowering or emergency-stop function BLUE: Saw unit in motion ⦁ Versatile support table 1,000 x 500 mm Fedpsw Axf Refx Adaefw ⦁ Scoring system via the main saw blade (co-rotating) ⦁ Automatic workpiece length detection for minimal travel distance ⦁ Mobile and height-adjustable control panel, including: Saw blade holder, template holder, emergency-stop button, start button, selector switch for grooving/scoring/cutting, rotary switch for feed speed, switches for laser (option) and USB socket ⦁ Max. saw blade projection (350 mm blade): 100 mm at 90° / 70 mm at 45° ⦁ Saw blade: diameter 300 – 350 mm, bore 30 mm ⦁ Saw blade speed: 4,000 rpm ⦁ Motor: 5 kW (= 7.5 HP) ⦁ Feed speed: 0 – 40 m/min ⦁ Total length: approx. 4,250 mm ⦁ Weight: approx. 1,300 – 1,700 kg (depending on cutting length and configuration) ⦁ Required air pressure: 7 bar ⦁ Extraction port: 1 x 100 mm, 1 x 120 mm ⦁ Extension table length: 3,670 mm / 4,270 mm / 4,870 mm (total length) ⦁ Tilting range: 0 - 46° ⦁ Sliding table: 1,000 x 400 mm (extension table) ⦁ Crosscut fence: 3,200 mm with 2 digital flip stops ⦁ Speed: 4,000 rpm ⦁ Air requirement: 6 bar ⦁ Motor voltage: 400 V (50 Hz) ⦁ Feed speed: 0 - 40 m/min Options Multistop, cutting width 2,100 mm instead of 1,300 mm Programmable saw blade height adjustment Miter fence +/-50° Cutting line laser Including delivery and installation within postal code areas 71,72,73,77,78,79,86,87,88,89

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable via pneumatic connection, can be raised and lowered Trimming length 2800 mm speeds 600/5000/4000/3000 rpm via V-belt Electric tilt with digital display Electric height adjustment with digital display Ffedoq Au Huepfx Adasw Cutting width 1000 mm rear support table 950 x 400 mm wide angle fence 2500 mm with extension 2840 mm with 2 stops suction connection 120 mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Trimming fence Air requirement for scorer 6bar connection

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: AB141760, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting width (max.): 1,500 mm, cutting width at rip fence: 1,500 mm, sliding table length: 3,200 mm, Equipment: scorer, SCM sliding table saw, model SI 400 E Connected load 380V Main motor 7,5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Fodpfx Adstwp Epeaefw Table extension 840 x 320 mm Parallelogram guard with wide and narrow hood Scoring unit manual adjustment electric height adjustment electric swivel with siko display Suction connection 1x100mm 1x120mm

Condition: not inspected (used), Year of construction: 1979, functionality: unexamined, Power rating: 380V 5.5kW Star-delta switch Fodev Uqa Eepfx Adaefw Edging carriage length: 3200 mm Height adjustment and tilting via handwheel Cutting width: 1000 mm Parallelogram guard with narrow cover Cross table with stop Rip stop Scoring unit WITHOUT miter stop

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Ffsdpfx Adewrb U Tjaew

Condition: good (used), Year of construction: 2001, machine/vehicle number: 60.11.012.01, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 155 mm, saw blade diameter: 450 mm, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,610 mm, pivoting range: 45 °, table length: 3,200 mm, table width: 1,610 mm, Equipment: motor brake, scorer, Format-4 Kappa 450 – Panel Saw – Well-Maintained Condition For sale is a Format-4 Kappa 450 panel saw from the manufacturer Format-4 (Felder Group), year of manufacture 2001, in fully functional and well-maintained condition. Features and Equipment: - Integrated scoring unit - Extra-wide rip fence – up to 1,610 mm cutting width The machine has been regularly serviced and is in good technical and visual condition. Key Technical Data: Model: Format-4 Kappa 450 Year: 2001 Fsdpfx Adexvdqioasfw Saw blade diameter: max. 450 mm Cutting width at rip fence: 1,610 mm With scoring unit and tilting function Condition: Used, well-maintained, fully operational.

Condition: good (used), Year of construction: 2000, Sizing saw with scoring unit Ffedstw Hd Aspfx Adaew 3 m sliding carriage Digital displays Width adjustment is no longer motorized Height adjustment converted to foot hydraulics Clamping beam not included in the price

Condition: used, Year of construction: 1991, machine/vehicle number: 2016, functionality: fully functional, power: 5.7 kW (7.75 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 85 mm, saw blade diameter: 350 mm, height adjustment type: electric, table height: 930 mm, cutting length (max.): 2,000 mm, cutting width at rip fence: 1,100 mm, space requirement length: 4,000 mm, space requirement width: 3,200 mm, table length: 2,080 mm, table width: 1,150 mm, This panel saw is in very good condition and fully operational. Certified defect-free by Sonic sys before acquisition in 2007. Since then, the machine has been operated in a bow-making workshop (archery) with extremely gentle use—overall less than 1 hour per day. Operating manuals are available. The machine is in use and can be tested at any time. Located in 31863 Bisperode (Hameln-Pyrmont). Dismantling, loading, and transport are the responsibility of the buyer. Ffsdpfx Adjwxyguoasw

Condition: new, Year of construction: 2025, F 35 Type 3 - 1000 5.5 kW (7.5 HP), 3 speeds Motorized height and tilt adjustment Large safety guard Double roller carriage, 3,200 mm Scoring unit with LED lighting CNC rip fence, cutting width 1,000 mm Angle-mitre fence 3,450 mm, without length compensation Table extension/table width extension: With premium CDF surface The solution for precise and versatile tasks. This saw impresses with its single-sided tilting saw blade, ideal for precise cutting of wood-based panels, solid wood, and even wood-like profile materials. Its solid machine base, made of robust 10 and 5 mm steel sheets, ensures stability and durability. With the proven double roller carriage featuring the Altendorf system, and motorized adjustments for the saw unit's height and tilt, we set new standards in precision and handling. A particular highlight is the intuitively operated eye-level control panel (tiltable and swiveling), equipped with a touchscreen, making operation and monitoring a real pleasure. Technical features 15" touchscreen (19:6) Fsdpexrc R Tsfx Adajfw Double roller carriage, 3,200 mm Electromotoric tilt and height adjustment 0 - 46° of the main saw blade, max. 154 mm Main drive with 3 speeds (3,000/4,000/5,000 rpm) Main saw blade diameter 300 - 450 mm Large safety guard Perfectly tailored for maximum flexibility and user comfort. The F 35 Type 3 is a flexible and convenient panel saw, ideally suited for modern businesses. With a motorized rip fence and optional DIGIT L or LD as well as interpolating axis movements, it offers high comfort and precision. A large modern display for controlling functions supports easy handling of this machine. The scoring unit, including LED lighting for the danger area and the optional RAPIDO system, ensures clean cutting results.

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm - or square-80 mm -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction Ffsdpfod Aai Tox Adaow -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg Ffodpfx Aormkl Aedasw - Outfeed roller conveyor 3000 mm - Infeed roller conveyor 3000 mm

Condition: good (used), Year of construction: 2004, Offer 24455 Technical data: - Saw feed via hand lever - Saw blade diameter 315 mm - largest opening width vice approx. 160 mm - Cutting range approx. at 90° approx. 100 mm - flat up to 135 x 80 mm - Cutting range Li + RE at 45° approx. 108 mm - flat up to 100 x 80 mm - Cutting range Li at 60° approx. 80 mm Ffsdpfxjuv Eygs Adaew - flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

Condition: used, Year of construction: 1981, machine/vehicle number: 55848, Lg. No. 24029 Technical Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90°: round 130 mm - square 120 mm - rectangular 300 x 40 mm - or 240 x 85 mm - at 45°: round 130 mm - square 110 mm - rectangular 245 x 40 mm - Miter adjustable left and right 0 - 90° each - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Saw blade feed speed continuously adjustable hydraulically - Coolant system Ffedpswk Icbofx Adasw - Automatic material refill system - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

Condition: reconditioned (used), Year of construction: 2022, machine/vehicle number: GM010.0310, functionality: fully functional, power: 7.5 kW (10.20 HP), input frequency: 50 Hz, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,300 mm, Manufacturer-refurbished Altendorf F45 with comprehensive ElmoDrive control system! TECHNICAL DETAILS Ffjdpfsw I Rtcox Adasw Carriage Lengths and Cutting Lengths Carriage length (double roller carriage): 3,400 mm Cutting length with angle fence: 3,300 mm TIP-SERVO-DRIVE: 2,990 mm Max. blade diameter: 550 mm Saw Blade Blade diameter: 550 mm Blade projection at 90°: 204 mm Blade projection at +45°: 141 mm MACHINE DETAILS Electrical Data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Fuse protection: 25 A Dust Extraction Connection Extraction (top): 80 mm Extraction (bottom): 120 mm Negative pressure: 1,200 Pa at main extraction port, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Extendable cross-slide table widening Display DIGIT L

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 550 mm, cutting length (max.): 2,900 mm, Altendorf F45 with comprehensive ElmoDrive control equipment! TECHNICAL DETAILS Carriage lengths and cutting lengths Carriage length (double roller carriage): 3,000 mm Cutting length with angle fence: 2,900 mm TIP-SERVO-DRIVE: 2,590 mm Maximum blade diameter: 550 mm Table extension: 840 mm Saw blade Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm Ffodpfjwynhpox Adaow MACHINE DETAILS Electrical data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Circuit protection: 25 A Dust extraction connection Extraction top: 80 mm Extraction bottom: 120 mm Negative pressure: 1,200 Pa at connection, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Dimensions Working height: 910 mm EQUIPMENT Template holder directly at the control Preparation for 2-axis scorer Extended cutting height with one-sided tilt

Condition: good (used), Year of construction: 1985, machine/vehicle number: 85-10-116, functionality: fully functional, Equipment: scorer, Machine no: 85-10-116, Type: TKR 45 Table: 1400X400mm Vorrizer, Fedowkha Tepfx Adajfw