Used Circular Sawmill for sale (2,385)

Condition: new, Year of construction: 2025, The machine is designed to cut both soft and hard wood or wood blocks in lengths compatible with the design of the machine. Dry or fresh (raw) wood can also be cut. This model is equipped with a powerful petrol engine. The absence of a power connection allows greater mobility and independence. Maximum cutting length depends on the number of extensions used (optional equipment). In the basic version, it is 2.72 m. Gasoline engine (LIFAN, manual + key start) 9HP Capacity 301cc The maximum dimensions of the workpiece 660x178x2794 mm The dimensions of the cutting band are 3670x34x0.9 mm Belt speed 17 m / min Pitch between the teeth 22mm Wheel diameter 475mm Dimensions 4064x1778x1800 mm Track dimensions 4042x900 mm Transport dimensions P1:1800 * 550 * 810 mm,P2: 2000 * 140 * 95 mm Weight 312/344 kg Kedpfxegykdue Aanjfa Additional 2 Meter section costs 350 euro without VAT

Condition: excellent (used), Saw blade Ø: 370 mm Cutting capacity at 90° round: 120 mm square: 100 mm rectangular: 180 x 100 mm at 45° round: 120 mm square: 100 mm at 60° round: 110 mm square: 90 mm 2 saw blade speeds: 15/70 rpm Kfodpfx Aox Ek A Tjansa Drive motor: 400 V, 1.8/2.2 kW Required space: 1000 x 1000 x 1800 mm Weight: 390 kg

Condition: used, Longitudinal circular saw Jrion Type HMS for precise longitudinal cuts in solid wood, board material and wood composites. Availability by arrangement from February 2026. cutting length: approx. 5,200 mm cutting width: about 700 mm Ksdpfxex D U Saj Aanefa

Condition: new, saw blade diameter 350 x 32 mm capacity degrees: round 1 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 180 x 95 mm capacity degrees: round 110 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 125 x 95 mm capacity 60 degrees: round .0 mm Kfjdpfxsxaab Se Aanea capacity 60 degrees: square x mm capacity 60 degrees: flat x mm

Condition: used, Year of construction: 1996, Used Machine Year of manufacture: 1996 Equipment and technical data: Cutting length: 2800 mm Cutting width: 1300 mm Format cuts: 2800 x 2800 mm Vertical cutting height: 0–75 mm Cutting height at 45°: 0–53 mm Cross-cutting by scale at angle stop: 2800 mm Motor: 4 kW Speed: 4200 rpm Saw spindle: 30 mm Saw blade diameter: 300 mm Table extension: 540 mm Anodized version Tiltable up to 45° Digital display of tilt angle Ksdpfexrhh Rsx Aanefa Prepared for scoring unit Mitre fence Dimensions: 2800 x 1600 x 1500 mm Weight: approx. 880 kg Availability: short-term Location: Röllbach

Year of construction: 2021, condition: new, −−−− Panel Data −−−− − Type of panels: Particle board, MDF − Top panel face: raw, uncoated − Bottom panel face: raw, uncoated − Panel geometry: plane−parallel / not warped or bent − Panel density particle board: 550 kg/m3 − Panel density MDF: 650 kg/m3 − Panel length: 2500 − 2800 mm − Panel width: 1100 − 1250 mm − Panel thickness: 15 − 55 mm −−−− Multirip Circular Saw −−−− − Type of feeding system: automatic, locally provided − Application: Multi−ripping using a fixed saw set−up including edge−hogging on both sides − Edge hogging on the left: approx. 3.0 − 4.0 mm − Edge hogging on the right: approx. 3.0 − 4.0 mm − Minimum strip width: 32 mm − Maximum strip width: 45 mm − Tolerance on ripping width: +/− 0.2 mm − Feed speed: approx. 15 − 50 m/min. − Driving power top saw shaft: 55 kW − Driving power bottom saw shaft: 90 kW −−−− General −−−− − Working height: 900 mm − Operating voltage: 400 V/50 Hz, 3 phase (C1−C2−C3−N−PE // TN−C−S) − Number of dust extraction outlets: 4 − Diameter of dust extraction outlets: 250 mm − Air speed: 30 m/sec. − Dust extraction capacity: approx. 21200 m3 per hour MULTIRIP CIRCULAR SAW K34G−UU/1500 Right−hand design − Basic machine designed to accommodate two bottom saw shafts with hydraulic vertical adjustment, arranged one after the other, for the fixed set−up of circular saw blades or milling cutters − Hydraulic height adjustment of top rollers − Mechanical setting of top roller pressure − Continuous insert tables made of laminated wood placed above the saw shafts − Saw shaft loading carriage − Main dust extraction device at the bottom with outlets on the infeed and outfeed side − Noise and dust enclosure with viewing window − Door with safety interlock incorporated in the tilting machine hood on the driving side, for changing the saw shaft with the machine running − 9 bottom knurled steel feed rollers (7 powered) − 13 top polyurethane−ring covered feed rollers (all powered) − Max. saw blade diameter: 270 mm − Cardan feed drive system for top and bottom feed rollers (and brush rollers, if included), consisting of gearbox with ball bearing spur gears, axletrees serving as drive shafts in the area of the rollers to be driven, power transmission to the rollers via cardan joints − Built−in table with bevelled front edge, 250 mm − Speed of saw shafts 4500 rpm − Feed speed infinitely variable from 5 − 50 m/min. by frequency−controlled gear motor 2.2 kW, with normal accessories, without tools − In case of manual removal of the workpieces directly after the machine, the maximum feed speed must be limited to 35 m/min. according to the European regulations. CONTROL SYSTEM M34G MULTIRIP SAW CONTROL SYSTEM − Siemens SIMATIC HMI touch screen − 7" colour display − Siemens S7xx control − control equipped with remote maintenance and thus easy to service − controlled top roller height − controlled saw shaft height Ksdpfxoi Dylfs Aanefa − product−specific programming possible (feed speed, material thickness, saw shaft height, ...) − interfaces to the locally provided master computer on inquiry − intuitive control due to the clearly arranged design − signal exchange with the workpiece feeding system − signal exchange with the workpiece removal system − "Industry 4.0 ready"

Condition: used, Circular saw-milling machine Bernardo FK2, good condition, 2.2 kW, 450 kg Kfjdex H Uigjpfx Aanja Price changes reserved; errors, misprints and typographical mistakes excepted.

Year of construction: 1991, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 Kedpfx Ajmydmboanjfa -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 Kjdpfxorkmv So Aansfa *Epoxy paint is used to ensure long life of the paint.

Condition: excellent (used), Year of construction: 1977, Panel saw Scoring unit Year of manufacture: 1977 1250 mm to the right of the blade 2800 mm cutting length 5.5 kW Dimensions approx. 2800 x 1200 x 950 mm Weight approx. 900 kg Kodewc Svpspfx Aanofa Not tiltable

Condition: like new (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 6,100 mm, roll diameter: 1,150 mm, saw drive: 30,000 W, Equipment: scorer, Industrial Bandsaw – High Performance Model: - WRC 1150 AC Motor Power: - 30 kW Cutting Capacity: - up to 30 m³ / 8 hours Maximum Log Diameter: - Ø 1150 mm Kfsdpfx Aex Hqpvsansa Applications: - industrial wood processing - joinery - pallet production - beams - solid wood cutting Maximum Cutting Length: - 6,100 mm (extendable) Total Length: - 6,100 mm - 6,000 mm with automatic log infeed - 6,300 mm long automatic outfeed roller conveyor, reversible (right/left) Input Power Type: - three-phase Height Adjustment: - electric Maximum Cutting Width: - 650 mm Bandsaw Blade Width: - 130 mm Equipment: - chassis Key Advantages (according to manufacturer datasheet): Performance and Efficiency: - High motor output enables fast and efficient cutting. - Exceptional productivity with up to 30 m³ cutting capacity during an 8-hour shift, with minimal energy consumption and low maintenance costs. High Precision and Accurate Cutting: - Perfectly straight cuts with minimal deviation. - Achieved through advanced technology and stable construction. Rugged Construction: - Withstands the toughest working conditions. Easy Operation and User Friendly: - Thanks to intuitive controls, quick installation, and straightforward adjustments, this saw is ideal for both industrial operations and individual craftsmen. Versatility and Durability: - Manufactured from high-quality materials, this machine is suitable for working with a wide range of wood types – from soft to hard, solid or composite. Intelligent Technology: - The innovative control system automatically adapts to different working conditions, saving time and resources. Safety Systems: - Integrated safety mechanisms ensure secure operation. Ecological and Energy Efficient: - Low energy consumption reduces operating costs and is environmentally friendly. High Degree of Automation: - Siemens / Schneider PLC and Wravor FastSmartCut program, always with manual operation option.

Condition: ready for operation (used), Year of construction: 2004, Bongioanni SNT 1400 carriage 4 grifes Saw blade 205mm wide Kfodpfx Aaex Ddkljnsa Without mecanization

Condition: used, Circular Saw Milling Machine KPSF2500-4.4, in good condition, 4.4 kW S1, 2700 mm cutting length, 2500 mm sliding table length, 700 kg Kfodpjx H Uimsfx Aanea Price changes, errors, printing and typographical mistakes reserved.

Condition: excellent (used), For sale is a used Felder K700 P panel saw with a cutting width of 800 mm. The machine is in very good condition and has been refurbished and inspected by our specialist staff. (Fully functional) Technical data: - Saw blade tiltable 90-45° - Sliding table 2000 mm - Short mitre fence 1100 mm - Extension table with mitre fence 2600 mm - Cutting width 800 mm with fine adjustment - Cutting height 102 mm (Saw blade D=315mm) - 5.5 HP (4kW) motor, 400 Volt - Machine No. 80-10/212-01 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: Saw, circular saw, panel saw, panel Reference: R-N44KA Kedexzgd Aopfx Aanjfa

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Kfjdpfx Aasxzfqbenoa Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm INCLUDED: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Note on used machines: • Errors in technical details and prior sale reserved. • Prices listed are ex-works prices – loading free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: three-phase, cutting length (max.): 7,000 mm, cutting width (max.): 900 mm, saw blade width: 80 mm, saw band width: 80 mm, height adjustment type: electric, Special offer price only valid for Germany, Austria and Switzerland Saw blade starter kit (10 pieces) as a free addition!!! KE90-7 18.5 kW - BASIC (stationary) The saw head with plenty of space above the saw blade enables the cutting of thick round wood with a diameter of up to 90 cm. The saw blades can be changed in a user-friendly and convenient way thanks to the gas pressure dampers on the protective covers. The base frame is completely hot-dip galvanized as standard. The basic machine BASIC includes: 1x SERRA Basic Plus control (larger control for an additional charge) 1x clamping turner 1x log holding arm 4x vertical stops 1x hydraulic blade tension 1x chip box 1x pre-cutter 1x log roller with drive 1x compensation roller without drive 1x saw blade cleaning 60L Kfodpfxju Dnbpj Aansa Basic cutting length: 7 m Log passage: 90 cm Ø Cutting width: 75 cm Hydraulic pump: 15 l Motor power: 18.5 kW Electrical network parameters: 400V/50Hz Saw blade width: 80 mm Delivery time is approx. 8 weeks from written confirmation of the offer.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, saw drive: 6,000 W, Industrial Crosscut Saw – Precision in Every Cut Kodpfxox Hqn Eo Aanefa • Manual operation • Automatic infeed roller conveyor • Infeed length: 5.5 m • Outfeed length: 3 m • Laser dimension indicator Model: o Wravor 700 B Motor power: o 6 kW Applications: o industrial wood processing o carpentry o pallets o beams o solid wood cutting Input power type: o three-phase

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Ksdpsx Dax Eofx Aanefa Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Condition: new, Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. Kodpfjx H Uctsx Aanjfa eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

Condition: like new (used), For sale is a used Felder K700 panel saw with a cutting width of 800 mm. The machine was only briefly in use for demonstration purposes at our facility. Therefore, it can be considered as new and comes with full warranty/guarantee. Technical specifications: - Tilting circular saw 90-45° - Sliding table 1300 mm - Mitre fence 1100 mm - Cutting width 800 mm - 4 kW (5.5 HP) motor, 400 Volt - Machine no. 425.04.050.25 The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, panel Reference: R-N1194 Kjdpfx Aexzd Aisanjfa

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Make KASTO Type:V350 U Year 1998 with mitre cut, roller conveyor and stop Saw blade dm.350mm Pneumatic vice and saw feed Kfedpfxofym Ewo Aanoa Stepless. Machine little used in good condition.

Condition: excellent (used), Year of construction: 1999, O F F E R We can offer you, subject to prior sale and errors excepted, the following ex stock, without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Kjdpfx Aaox A H Rrjnefa Model: VMS 370 Year of manufacture: 2000 Max. saw blade Ø: 370 mm Cutting capacity: - Pipes approx. up to 130 mm - Flat material: 200 x 100 / 140 x 100 mm - Solid material (square): 120 mm Note: For mitre cuts, cutting capacities may be somewhat reduced—up to max. 140 mm. Saw carriage stroke, manual, vertical approx.: 200 mm Saw blade speeds: 17–34 rpm Saw blade drive approx.: 2/2.6 kW Total drive approx.: 3 kW – 380 V – 50 Hz Weight approx.: 500 kg Accessories/Special features: • Adjustable saw head for mitre cuts at 30° / 45° / 90° via scale • Pole-changeable three-phase motor with max. 2.6 kW drive • Manual feed of saw carriage with long, adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant system with chip collection tray • Roller conveyor material feed approx. 2,000 mm • New saw blade installed, 2 spare saw blades included • Electrical system recently overhauled Ideal machine for locksmithing and metalworking shops. Condition: Very good – ready for demonstration – very smooth running Delivery: Ex stock, as inspected Payment: Net, strictly after receipt of invoice We look forward to your order. We also have larger EISELE cold circular saws and other (band/hacksaw/cold circular) saws in stock. Further saw machines always available—please enquire.

Year of construction: 2007, condition: ready for operation (used), Number of knives: 5, scoring pairs: 8, tool positioning accuracy: +/-0.5mm, min. scoring gap: 0.7mm, min. blank width: 82mm, min. scoring distance: 60mm, knife diameter: 240mm, working width: 2500mm, max. corrugated board thickness: 16mm, web speed range: 30m-120m/min, max. stack height (outfeed): 1400mm. Machine dimensions X/Y/Z: approx. 4300mm/3500mm/2200mm, weight: approx. 8000kg. Documentation available. On-site inspection is possible. Kfjdpfx Aox I Rp Sjansa

Year of construction: 1980, condition: used, Circular saw with miter cut Make KALTENBACH Type:KKS 400 M Year.ca.1980 Hydr.feed infinitely variable. Kfjdpfx Aasixumvjnea Saw blade: 400mm

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Saw blade dm.355 mm Ksdotwn E Uspfx Aanjfa Cutting range round max.120 mm Square max 120 mm X 120 mm