Used Mitre Circular Saw for sale (8,583)

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW Cgedpod N H A Njfx Afpen hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Cgedpfx Asx Avtvjfpjn Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cgsdetv Rgrjpfx Afpen Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Csdpfsquzd Rsx Afpsgn Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Csdsdzp Snopfx Afpegn Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Cgsdpfx Afsdzp T Depon Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: ready for operation (used), A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible. Cjdpjwt Tkvjfx Afpegn

Condition: used, Year of construction: 2008, fully equipped, with cutting extension to 540 mm incl. HM special blade 350 x 3.5 x 40, 108 trapezoidal teeth flat tooth, negative rake for aluminum cuts used, top condition, low hours Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Machine no.: 2008/30/23 CE pattern tested Motor 2 kW Brake motor Cutting height approx. 135 mm Large cutting length extended to approx. 540 mm Blade diameter approx. 350 mm Saw blade bore approx. 30 mm Tiltable right Tiltable left Machine base Roller table right 3000 mm with stop and scale – RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Cgjdpjww Nd Tefx Afpen Roller table left 5000 mm, type RO Feed brake Material support made of aluminum Coolant spraying system 2 x pneumatic workpiece clamps right + left Pressure reducing valve Original price approx. €12,750.00 Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: used, cleaned, partially refurbished, with new support plate Codpfx Afow En Igjpsgn used, in good condition Manufacturer Graule Type ZS 85 N GS-certified Motor 2.5 kW 220 V Cutting height approx. 85 mm Cutting length approx. 350 mm Blade diameter approx. 300 mm Swivels right Swivels left Tiltable up to 45° Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover in the actual condition as inspected, without any warranty or guarantee

Condition: new, 400 Volt Drehstrom-Bremsmotor 5,0 kWSägeblattdurchmesser 520 mm,Sägeblattaufnahme 50 mm,Schnitthöhe 200 mmSägeblatt auf 45° geneigt: Schnitthöhe 140 mm,Schnittlänge 420 mm,mit Maschinenständer und Handkurbel hintenzur Neigungseinstellung Cgedjvxr Thspfx Afpen

Condition: used, Year of construction: 1986, incl. 2 saw blades d, good conditionmake Grauletype ZS 85 Nyear of manufacture 1986motor 2.2 kWcutting height approx. 85 mmcutting length approx. 380 mmblade diameter approx. 300 mmsaw blade bore approx. 40 mmswivel right up to 45°swivel left up to 45°tiltablemachine basefeed brakematerial system made of aluminum-steelnew price approx. 5.000,00 € with accessoriessuction connection D 80 mmweight approx. 150 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Cgodsvwfg Eopfx Afpsn

Condition: excellent (used), Catalogue number 7887 Cgodpfxoyg Il Ts Afpen TECHNICAL DATA - Max. saw blade diameter: 350mm - Saw blade bore diameter: 30mm - Max. cutting height: 100mm - Main blade adjustable up/down and at an angle - Saw blade guard - With side trolley - Cutting length on trolley: 920mm - Cutting width with fence: 600mm - Main motor: 4kW - Table dimensions: 102x900mm - Mitre gauge - Extraction port diameter: 110mm - Dimensions (LxWxH): 2110x1370x1000mm - Weight: 550kg ADVANTAGES – Made in Poland – With side trolley – Mitre gauge – Used saw, very good condition Net price: 7,900 PLN Net price: 1,880 EUR (exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7884 TECHNICAL DATA - Max blade diameter: 350 mm - Blade bore diameter: 30 mm - Max cutting height: 80 mm - Main saw blade adjustable up/down and at an angle - Blade guard included - With side sliding carriage - Angle fence - Cutting length on carriage: 780 mm - Cutting width at guide: 1320 mm - Main motor: 4 kW - Two spindle speeds: 3000, 4000 rpm - Table dimensions: 1120x1020 mm - Table extension – 3 metal rollers - Extraction port diameter: 65 mm, 110 mm - Dimensions (L/W/H): 2210x2980x1100 mm - Weight: 615 kg ADVANTAGES - Manufactured in Poland - With side sliding carriage - Used saw, in very good condition Net price: 8,900 PLN Net price: 2,120 EUR depending on the rate 4.2 EUR Cjdpfx Ajyg Ig Dofpjgn (Prices may change with significant fluctuations)

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Codpfoxtbtpex Afpogn Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: excellent (used), For sale is a used Panhans V91 Twin II panel saw with a cutting length of 3200 mm. The machine is in very good condition and has been inspected by our qualified personnel. Technical specifications: Cgedpfx Ajwza N Uofpjn - Double tilting saw unit - Cutting length: 3200 mm - Cutting width: 1250 mm - Cutting height: 173 mm - Max. saw blade diameter: 500 mm - Overhead control panel - Angle scale with length compensation - Motor power: 7.5 kW - Year of manufacture: 2012 The panel saw is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: saw, circular saw, panel saw, format Reference: R-S24F9

Condition: used, Cutting length: approx. 5,300 mm Longitudinal circular saw Irion type HFS-170/15-SA for precise longitudinal cuts in solid wood, panel materials, and wood composites. Csdpexvcacefx Afpjgn

Year of construction: 2016, condition: excellent (used), functionality: fully functional, X-axis positioning speed HS version: 50 m/min Electronic control of intermediate angles Max. internal inclination: 45° Max. external inclination: 15° Electronic CNC feed axis for the saw blade Usable cutting length, depending on model: 5 m Saw blade diameter: 550 mm Conveyor belt for step-by-step or automatic cutting Windows XPE operating system Cgedpfx Aoygr H Iofpon 10.4” color graphic TFT display – 800x600 (SVGA) Touch screen functionality

Condition: ready for operation (used), functionality: fully functional, cutting height (max.): 80 mm, cutting length (max.): 2,500 mm, total length: 7,470 mm, total width: 1,100 mm, overall weight: 450 kg, total height: 1,500 mm, type of input current: three-phase, main saw diameter: 340 mm, OMGA T720 crosscut saw Codpfer Ik I Ajx Afpjgn Specification: - condition - used - manufacturer - OMGA - model - T720 - working width - 250 mm - working height - 80 mm - motor power - 2.2 kW - right table length - 400 cm ( 2 x 200 cm ) - left table length - 315 cm - tables with a width of 29 cm - pneumatic ratchets for cutting to the set length - 3 pcs. - adjustable cutting speed - max blade diameter - 340 mm - spindle - fi 40 mm - suction nozzle - fi 100 mm - weight - about 450 kg - overall dimensions - 742 x 110 x 150 cm (L x W x H) - body dimensions - 100 x 110 x 150 cm (L x W x H) Additional information: - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT

Condition: used, Year of construction: 2004, Feed length: max. 5,500 mm Saw blade diameter: max. 700 mm Cutting width: max. 700 mm Cutting height: max. 120 mm Cgedpfx Aox Eblvsfpsn Automatic optimizing cross-cut saw (push saw) Dimter type OptiCut 700 for cross-cutting very wide timbers according to defects (fluorescent chalk) and lengths.

Condition: used, Year of construction: 2022, Outfeed belt: 7.5 m Infeed thickness: 12 – 80 mm Infeed length: 400 - 6300 mm Cgodpsx Ditfjfx Afpjn Marking station: 5,000 mm Saw blade ø: 500 mm Saw motor: 7.5 kW Control system: OptiCom Pro Cycles: approx. 1 sec Feed speed: max. 250 m/min Optimizing cross-cut saw Weinig type OptiCut 260 for automatic cross-cutting of timber based on defects (fluorescent chalk) and lengths. The separate measuring station records the lengths and marked defects.

Condition: used, Width: approx. 140 cm Height: approx. 160 cm Length: approx. 320 cm Motors: 2 Technical details: on request Cgjdpfx Aexwbpfsfpon Table: Tiltable The robust combined woodworking machine Bäuerle type KFL unites a panel saw, slot mortiser, and spindle moulder with power feed in one machine and comes with a comprehensive range of accessories.

Condition: used, Roller conveyor: 250+360 cm Cutting width: max. approx. 600 mm Cutting height: max. approx. 120 mm Feed: Pneumatic Cjdpfx Ajxrtzpsfpsgn Pfeiffer Piccolo pendulum saw with stable roller conveyor for cutting boards and beams. The machine is equipped with a pneumatic saw feed and secure two-hand operation. Video available upon request.

Condition: used, Mitre angle: 45° – 90° Cutting length: approx. 2,200 mm Cjdpfx Afew D Dfxepsgn Further data: See PDF Workpiece: max. 50x70 mm Double mitre circular saw Striffler type 2750-E for precise mitre and cross cuts in wooden profiles, mouldings, and frames. The machine is ideally suited for series production in window, door, and furniture manufacturing thanks to two pneumatically swivelling saw units and electronic positioning.

Condition: used, Motor: 3 kW Triple combination table saw, slot mortiser, and milling machine Kirchner Leipzig. Cgjdpfxowzbcve Afpon Without milling arbor.

Condition: used, Operation: Foot switch Codpfxov Hp Hbo Afpegn Strip width: max. 100 mm Strip height: max. 100 mm Possible angles: 90°, 120°, 135° Cycle time: approx. 4 seconds Mitre Assembling Machine Himmel Type HF120 for precise and strong gluing of mitre joints in wooden frames, muntins, and strips using white glue. The machine enables fast curing times through high-frequency technology, pneumatic pressing mechanisms and exact alignment of the workpieces. Ideal for furniture and picture frame production. Glue application must be performed manually, as the machine does not have a glue reservoir.