Used Circular Sawmill for sale (2,293)

Condition: good (used), Year of construction: 2003, functionality: fully functional, Internal article number: 26081 Metal circular saw BIMAX TA 91-250 Year of manufacture: 2003 + Roller conveyor 2550mm + Coolant pump + Various saw blades + Operating manual / Electrical wiring diagram Control: Siemens Simatic OP7 Dimensions (L x W x H): 130 x 110 x 195cm Weight: approx. 1000 kg Dimensions of roller conveyor: 260 x 70 x 105cm Bdsdpezxgvaofx Airei The machine is fully functional and can be inspected while powered on, by arrangement, in our heated warehouse covering an area of over 500 m².

Condition: used, Year of construction: 2020, saw blade diameter 420 mm capacity 90 degrees: round 130 mm capacity 90 degrees: flat 160 x 100 mm capacity 45 degrees: round 110 mm capacity 45 degrees: square 130 x 80 mm turning speeds 3000 U/min engine output 2,0 kW total power requirement 2,0 kW Bdsdpfxoygx Ais Airji weight of the machine ca. 190 Kg dimensions 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) Bdjdpfx Aiorkmv Ssrji * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.

Condition: good (used), Spare parts for the Zembrot sawmill Bsdpfx Aisz Ak Hkjrsdi

Condition: used, Round magnets with MK 4 mount, D = 140 mm and D = 220 mm Bodpfo Afw Scex Airjdi

Condition: used, Rema circular saw with carriage Main motor: 5.5 kW 3 cutting speeds Scoring saw: 0.75 kW Saw blade adjustable up/down and at an angle of 0-45 degrees Max. blade diameter: 400 mm Used machine, still in good working condition. Bdodpfjz A Al Nex Airji

Condition: repair required (used), HAMECH TKS 400 CIRCULAR SAW – FOR PARTS For sale: a Polish-made HAMECH TKS 400 circular saw. The machine is sold FOR PARTS / FOR REPAIR – it is incomplete. MISSING THE SAW LIFTING / ADJUSTMENT MECHANISM. Sold in the condition shown in the photos. DATA FROM THE NAMEPLATE: • Manufacturer: HAMECH • Forest Machinery Industry Plant • Type: TKS 400 • Year of manufacture: 1990 • Serial number: 536 • Voltage: 380 V • Motor power: 5.5 kW • Frequency: 50 Hz The saw has a solid, heavy-duty construction and a large work table. The machine can be used as a basis for repair or as a source of spare parts. PLEASE NOTE: • Missing saw lifting mechanism • Machine is incomplete • Not sold as ready for operation • Technical condition has not been thoroughly checked • Visible signs of years of use • Paint loss and surface corrosion • Sold in the condition shown in the photos For the TKS 400 model, configurations with a main blade up to 400 mm, a 5.5 kW motor, and adjustment of the blade position up/down and at an angle are common. The parameters of individual TKS 400 versions may vary. The machine is sold as INCOMPLETE – FOR PARTS / FOR REPAIR. Possible to inspect before purchase. Bedpfez Hrgqex Airsdi Collection in person.

Condition: used, Year of construction: 2026, Avola construction site circular saw ZBV 500-S. Complete with operating manual, adjustable cutting height, and bevel adjustment 90°-45°. Electrical connection for three-phase current 400 V, 50 Hz. Device plug CEE 32, with phase inverter. Circular saw blade, carbide-tipped, sound-dampened, 500 mm diameter. With safety guard and table extension. Parallel fence with 2 support edges. 4 lifting eyes. Cutting height 0-170 mm, weight 175 kg. Motor power P1/P2: 6.4/5.0 kW. Therefore, ready for use in all respects. Bsdpfs Af Nnlox Airsdi Storage location: Available for delivery.

Condition: excellent (used), Catalog number: 7937 TECHNICAL DATA - max. disc diameter: 500mm - spindle diameter: 30mm - pneumatic top pressure - disc guard - pneumatic disc extension - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - diameter of dust extraction nozzles: 120mm - table dimensions (length/width): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table + guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall dimensions of the machine (without table) (length/width/height): 1200x640x1280mm Bjdpfx Aszrnt Hjirjdi - weight: approx. 500kg ADVANTAGES – Polish-made – original technical documentation – 2 roller tables – pneumatic disc stroke – used saw, in perfect condition Net price: 14900 PLN Net price: 3465 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in exchange rates)

Condition: excellent (used), Catalog number: 7545 TECHNICAL DATA track width: 250mm roller width: 220mm max. disc diameter: 300mm disc bore diameter: 60mm cutting height: 100mm table width: 650mm table length: 1460mm – top: 2 rows of pawls smooth, sliding roller roller with saws smooth, sliding roller – bottom: guide pawls track 2 feed speed settings + stepless adjustment central lubrication feed motor: 1.2kW main motor: 21kW dust extraction port diameter: 180mm overall dimensions (L/W/H): 1700x1450x1500mm weight: approx. 1800kg – made in Italy Bdodpfx Aoztad Tjiroi – DTR documentation available – robust machine – used multi-blade saw, very good condition Net price: 22900 PLN Net price: 5326 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Year of construction: 2012, saw blade diameter 400 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180 x 100 mm saw blade turning speeds 3000 U/min total power requirement 2,2 kW weight of the machine ca. 0,51 t Bdsdpoy N D Nhofx Airei dimensions 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m

Condition: used, Model FSK Dimension of sliding table- 3000x330mm Gross cut capacity- 2700mm Width of cut between saw blade and rip fence - 1650mm Saw blade diameter - 400mm Scoring saw blade diameter - 120mm Height of cut - 125mm Speed levels 3 Tilting saw blade - 0-45º Saws lifting, up and down, mechanical control. Bsdpfjz Dt U Rsx Airjdi Main motor - 5,5 kW Scoring motor - 1,1 kW With clamp Weight: 780 kg Transport dimensions - 3100x1300x1200mm Price 1500 Eur (EXW Jonava, Lithuania)

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL INFORMATION Manufacturer: Eisele Type: LMS III-D Machine number: 3.028 Year of manufacture: 1975 Machine type: Metal circular saw Bdjdpfx Aio Aduyhsrsi ELECTRICAL DATA Operating voltage: 220–380 V DRIVE Speed: up to 2,800 rpm TOOL Grinding wheel diameter: 250 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 700 mm Width: 500 mm Height: 1,000 mm Weight: 150 kg

Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Year of manufacture 1982 With sliding table Swivel saw blade Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available - Bdjdpsr Elmwefx Airji

Condition: new, Year of construction: 2026, functionality: fully functional, The semi-automatic circular saw TL-600-A is an “upcut” machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (partially solid materials). The machine is characterized by its easy operation, quick and convenient material changes, and simple miter angle adjustment. The TL-600 A has a continuously adjustable miter range to the left and right up to 20° (swivel range of two times 70°). Technical data: • Cutting range: 90° round: 230 mm / square: 200 x 200 mm / rectangular: 500 x 50 mm 45° L/R: round: 230 mm / square: 160 x 160 mm / rectangular: 250 x 100 mm • Drive power 4.1 KW / 400 V / 50 Hz • Speed 3000 RPM • Cutting speed 55 m/sec • Blade dimensions 600 x 50 mm • Working height 970 mm • Max. cutting height 230 mm • Dimensions 1300 x 1220 x 1635 mm • Weight 500 kg Equipment: • Double miter 20° – 90° – 20°, large support plate, powerful drive motor • Two-button control for initiating the sawing cut (optionally also available as a single-button control) • Clear control panel • Adjustable blade/cutting feed Bdodpfx Aij Aft Rheroi • Two vertical and two horizontal pneumatic clamping cylinders • Hydropneumatic lifting of the saw blade, with oil level indicator • Fixed material support can be moved to the rear to increase cutting performance • Large protective cover, covers the entire work area • Minimal lubrication system with a 2-liter reservoir • Air gun for cleaning the machine • Saw blade ø 600 mm

Condition: new, Year of construction: 2024, Type of device/machine SAW PLANT - Manufacturer PRIMULTINI Bedpo Ad E Uvjfx Airjdi - Type SLH - 1800 - Year 2024 TECHNICAL STATE - The sawmill consists of: - Band saw PRIMULTINI type SLH 1800 , year 2024 - PRIMULTINI stroller year 2024 - Transporters pcs. 2 PRIMULTINI, year 2024 - The sawmill is new and has not yet been installed - According to the above findings, the sawmill should be in technically correct condition

Condition: used, Technical data: Saw diameter: 500 mm Bsdpferi Skwox Airedi Saw spindle diameter: 30 mm Saw feed manual Max cutting height: 150 mm Max cutting width: 500 mm Table width: 580 mm Table with 6 rollers in the table Diameter of rollers: 60 mm Extraction spigot diameter: 100 mm Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 4000 mm Width: 1180 mm Height: 1700 mm

Condition: good (used), Year of construction: 2014, machine/vehicle number: 746, Offer 26216 Technical data: - Saw blade diameter up to 400 mm - Miter adjustable to the left and right up to 30° - Cutting range at 90° for round and square stock: 140 mm - Cutting range at 90° for rectangular stock: 210 x 120 mm - Cutting range at 45° for round and square stock: 120 mm - Cutting range at 30° for round and square stock: 105 mm - Cutting speeds continuously adjustable from 10 to 80 m/min - Feed speed of the saw blade hydraulically continuously adjustable - Pneumatic clamping system/vise - Coolant system + micro-spray system Bedsz Ny Ddjpfx Airjdi - Outfeed – roller conveyor with dimension stop: 3000 mm - Infeed – roller conveyor: 3000 mm - Pneumatic connection: 6 bar - Drive: 400 V / 4.0 kW - Space requirement: approx. W 1000 x H 1900 x D 1200 mm - Weight: approx. 1000 kg

Condition: used, Year of construction: 2001, turning speeds 15/30 U/min Bdsdpfxe Agpgxs Airji saw blade diameter max. Ø 370 mm Vice opening 180 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100x100 mm capacity 90 degrees: flat 180x100 mm 105 mm 100x100 mm 130x100 mm 120 mm 100x100 mm 130x100 mm weight of the machine ca. 400 kg dimensions of the machine ca. 1100x900x1850 mm

Condition: used, Year of construction: 2026, machine/vehicle number: 0101-260040, BEHRINGER EISELE VMS 350 – Vertical Metal Cutting Circular Saw The BEHRINGER EISELE VMS 350 is a robust, manually operated industrial metal cutting circular saw for precise cutting of steel pipes, profiles, and solid materials. The powerful worm gear with EISELE rotational balancer ensures low-vibration sawing, high cutting quality, and long saw blade life. The precise miter adjustment, simple operation, and integrated coolant system make it a reliable circular saw for steel construction, metalworking, and workshops. Key technical data: Saw blade diameter 350 mm Motor power 1.4 / 1.9 kW Speeds 17/34 or 34/68 rpm Cutting range 90° round Ø 120 mm Cutting range 90° rectangular 170 × 100 mm Cutting range 45° round Ø 120 mm Bjdpfe Afagcsx Airedi Miter adjustment Up to 45° on both sides, 30° to the right Material clamping / Feed Manually Dimensions (L × W × H) 895 × 665 × 1,750 mm Weight approx. 300 kg

Condition: used, Year of construction: 1989, saw blade diameter 400 mm capacity 90 degrees: round 120 mm Bjdpfxsy D A E De Airedi turning speeds 1400 / 2800 U/min engine output 4,0 kW weight of the machine ca. 180 Kg dimensions 1,0 x 0,9 x 1,2 m Manuell underfloor aluminum circular saw

Year of construction: 2013, condition: used, This machine is used for sharpening circular blades for Eillert slicing machines. The machine is in good working order and ready for use. Please check my other listings. Bdodpsz H At Uefx Airji

Condition: used, Year of construction: 2022, Woodmizer block bandsaw, year 2022, incl. debarker, electric height adjustment, electric feed, 900 mm max. log diameter, 11 kW, 10 m cutting length, 1000 kg Bjdpfx Aioxlnf Aeredi

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Sharpening machine for carbide-tipped circular saws. Sharpens the front and rear edges in a single pass. Bedpozl Snuefx Airsdi Technically inspected. Technical specifications in the PDF.

Condition: used, Stock of 4 circular saws for construction sites Bjdj Ahgp Hspfx Airodi