Used Cleaning Equipment for sale (45,365)

Year of construction: 2020, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20526 Specifications: Model: AD500 Year of Manufacture: 2020 Voltage: 400V Maximum Working Pressure: 14 bar Weight: 165 kg Condition: In good working order Delivery Status: Ready for delivery Iedjxu A Dfjpfx Adwjht Description:Pneumatech AD500 refrigerated air dryer, manufactured in 2020. The unit is in good working condition. Ready for immediate delivery and use. Total Weight: 165

Year of construction: 1994, operating hours: 34,200 h, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20522 Specifications: Ijdoxu A Ecjpfx Adwjht Year of production: 1994 Hours : Approximately 34,200 Voltage: 400V Condition: Works as it should Delivery status: Ready for delivery Description: The compressor was produced in 1994 and has run approximately 34,200 hours . It works as it should and is ready for immediate delivery. Hours: 34200

Year of construction: 2016, operating hours: 68,000 h, condition: used, Serial number: CAI72xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20523 Specifications: Model year: 2016 Hours: Approx . 68,000 Voltage: 400V Ihodjxu A Eiepfx Adwot Maximum pressure: 8.25 bar Weight: 360 kg Condition: Ready for delivery Description: The compressor is from 2016 and has run for approximately 68,000 hours . Ready for immediate delivery. Hours: 68000 Total Weight: 360

Year of construction: 2008, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20893 Specifications: Year: 2008 Bucket volume: approx. 1,600 liters Ihodswwqduspfx Adwjt Bucket width: approx. 200 cm S70 quick coupler (top and bottom) Previously mounted on CAT 325DL (2008 model) 4 hydraulic hoses (approx. 240 cm) Extra outlet Control system: Engcon No. 9 Description:Engcon EC30 tiltrotator and SMP grading bucket sold as a set.Both feature S70 couplers and were previously fitted to a CAT 325DL.According to the owner, both units are in decent working condition.Available for prompt delivery. Own weight: 1000 Model: Engcon EC30 Rotortilt & SMP Pusseskuffe – S70 feste

Year of construction: 2018, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21946 Specifications: - 2018 model - S40 attachment - Stood on a 5 ton truck - Works as it should - Ready for delivery Isdpfox Am Ttox Adweht Own weight: 11 Model: Pigghammer m/ S40 feste.

Year of construction: 2003, condition: used, Various blasting machines are for sale! Roller table blast machine Trough belt shot blast machine Haengebahn blasting machine Rotary table blasting machine Blast cabinet Pressure blasting cabinet . Ihjdpfs Hq S Dox Adwot

Year of construction: 2016, condition: used, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 13667 Ihsdpfevg N Hhex Adwot Specifications: - Holm's SL-2.5 - 2016 model - Board (see pictures) - Own weight: 375 kg - Ready for delivery

Year of construction: 2010, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21293 Specifications: Approx. 2010 model S70 coupling Functions as it should 645 kg Ijdsxb N Dxepfx Adweht 172 bar Ready for delivery Own weight: 645 Model: HS11000

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 Iedpofz U Nbjfx Adwoht 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Ijdpfx Adoflk Awjwjht 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19981 Isdpfx Adoxt Dgrewoht Description:Handtmann VF 200 sausage stuffer for making sausages, equipped with automatic twister. The machine has been in operation until March 13, 2025 and has worked. It is ready for immediate delivery.

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19985 Description: 120 liter Kramer & Grebe chopper. New engine, axle, bearings and overhauled belts. 230 Volt cabinet included. Ihedpjv U Shkefx Adwot Can be delivered at short notice.

Condition: used, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: LP-240/03, total width: 250 mm, total length: 250 mm, total height: 35 mm, overall weight: 2 kg, input voltage: 230 V, input frequency: 50 Hz, The item offered is a slightly used but as-new rotating inspection window in its original packaging. It is mounted on the inside of your machine screen and, thanks to its rotation, ensures a consistently clear view of your machining process—even with high coolant volumes. Ihjdpfxjx Rvi No Adwet Includes: - 24V 15A power supply - HaiClear SDU electronic control unit with soft start feature - Original operating manual Please see the attached flyer for further information. If you have any questions or are interested, please feel free to contact us.

Condition: good (used), Approx. 55 order picking trolleys, with drawbar and coupling for assembling towing trains, also usable individually – used – : Price per unit: €225 (net)! Price for complete purchase: €199 (net) / unit! Priority is given to selling the entire lot! Manufacturer: unknown, presumably Wanzl Type: unknown, presumably KT4 Year of manufacture: unknown Load capacity: 500 kg Height incl. wheels: approx. 1.85 m Width: approx. 80 cm Depth / Length: approx. 1.30 m Equipped with drawbar and trailer coupling – allows creation of trolley trains The drawbar is spring-loaded, allowing it to be lifted and connected to the coupling of the leading trolley (video available on request) At least 1 intermediate shelf, some with 2 intermediate shelves Some units fitted with fork sleeves Load capacity: 500 kg One 'train' can consist of a maximum of 4 trolleys with max. 350 kg/trolley Max. speed: 4 km/h Ihedjx Tdccepfx Adwet 2 push handles Condition: good Available: immediately Location: Dortmund area

Condition: used, Optics Make Heidenhain Type OZA II 02 - 6 Device number 2739 Mounting distance 14,30 Isdpfecifpmox Adweht

Year of construction: 1994, condition: used, Serial number: 1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21348 Ihjdpfxexc Tqfo Adwst Spesifikasjoner: 1994 modell Usikker tilstand Rust Krokramme Leveringsklar Own weight: Model: Komprimator

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21931 Specifications: Year model uncertain Ihjdpsx Anccefx Adwst Weight: 1785 kg 400 volts Ready for delivery Description:Trenchin SN 50 C lathe with some equipment.The lathe has seen little use and has been well maintained.Ready for delivery. Own weight: 1785

Year of construction: 2021, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 22061 Specifications: Iedpfxsx Ip Tpe Adweht 2021 model Approx. 5.5 meters wide Lightly used Ready for delivery Description: Folding wing from 2021.The owner has hardly used it.Ready for delivery. Own weight: 11 Model: 5,5 m

Year of construction: 2021, condition: used, Serial number: U-H2 52-75-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22059 Specifications: Model year 2021 Weight: 2,500 kg Ready for delivery Ihodpox Ip Uyefx Adwet Own weight: 2500 Model: Schmidt U-H2 klappvingeskjær

Year of construction: 2020, operating hours: 1,050 h, condition: used, Serial number: 2292xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21978 Specifications: Ihsdpox Dg Utefx Adwot 2020 model Hours: approx. 1050 Chassis (see photos) Remote control Shaft set for concrete and wood Includes equipment for installing a magnetic belt AdBlue is disconnected Delivery by agreement Description:2020 Arjes Evo waste shredder.One shaft set for wood and one for concrete.See video.Delivery by agreement. Hours: 1050 Own weight: 11 Model: Evo Avfallskvern. For betong og treverk! SE VIDEO.

Year of construction: 2020, condition: used, Serial number: U-H2 58-74-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22058 Specifications: 2020 model Weight: 2635 kg Ready for delivery Ihedpfx Asx Ip Umsdwst Own weight: 2635 Model: klappvingeskjær

Year of construction: 2022, operating hours: 72 h, condition: used, Serial number: AMOxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21151 Specifications: 2022 model Hours: 72 Weight: 2,950 kg Stage 5 engine Remote control Good tires Ready for delivery Ihodpfx Adew R Nnqswet Hours: 72 Own weight: 2950 Model: F10 Strekkemaskin. Som Ny.

Condition: used, Please contact ATS Norway for more information Ihedpfxoxx H Nyo Adwet Please provide reference number upon request: 21840 Description: Price is per unit.Owner states that one is a 2019 model and the other is a 2017 model.Ready for delivery.

Condition: new, Year of construction: 2025, Pulsed laser cleaning device with 200 watt laser power Significantly more effective for cleaning/de-rusting applications than continuous lasers Iedpfjuhcd Rsx Adweht as used, for example, in welding lasers. - Now available to view and test with us - Top device at a top price from our exhibition - For paint removal, de-rusting, stainless steel weld seam cleaning, etc. - 200 watt pulsed laser / air-cooled - German menu navigation - Immediately available - Leasing or hire purchase possible through our financing partner Sale only to commercial customers Approx. machine dimensions: Width: 60 cm Height: 120 cm Depth: 110 cm Weight: approx. 100 kg

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21085 Description:Various laboratory equipment supplied by HECO for stone quality control.Sold together with the container.The equipment was recently in use and is functioning properly.A complete equipment list is attached as an image.Quick delivery possible. Own weight: 3000 Model: Laboratorieutstyr til steinprøver Ihedpfxow Nvgke Adwst