Used Cnc Flatbed Lathe for sale (14,294)

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Leadwell CNC lathe Model LTC - 20 AP Year : 1995 Working lenght : 550 mm. Laedpfxoxqcqqj Aaboh Max. working diameter : 300 mm. Spindle borer : 62 / 52 mm. Number of tools : 12 pcs. X-axis travel : 175 mm. Z-axis travel : 600 mm. Control : Fabuc O-T 3-jaw chuck Tailstock Tool-Setter Tool posts Interface RS-232 C Tool locker Chip conveyer Coolant

Condition: like new (used), Year of construction: 2017, TANDEM 215GL Ljdpfxjvm Ef Tj Aaboah

Condition: good (used), Year of construction: 2006, Puma 700M 2006 Doosan Puma 700M CNC Lathe (2006) Controlled axes: 3, X: 470 (450+20)mm, Z: 1650mm, C: 360(0.001)gr Tools in revolver: 12 (BMT85) Spindle RPM: 3-1500, Rotating tools RPM: 30-3000 Automatic door Weight: 16,100 kg Note that this lot is located at Braås, Sweden Lodsxpdrtopfx Aabjah

Condition: excellent (used), Year of construction: 2005, operating hours: 5,423 h, turning length: 510 mm, turning diameter: 356 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, total height: 2,230 mm, total length: 3,495 mm, total width: 2,050 mm, overall weight: 5,800 kg, CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 520 C-axis: 360º (0.001°) Turning length mm: 515 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Counter spindle Counter spindle travel mm: 525 Equipment Chip conveyor Signal lamp Tool measuring arm Workarea light Lajdpfx Aaoui Ndbobeh Working time hours Under power: 7.456 Cutting Time: 5.423 Basic machine dimensions / weight Length mm: 3.495 Width mm: 2.050 Height mm: 2.230 Weight kg: 5.800

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, turning length: 560 mm, turning diameter: 220 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 170 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, overall weight: 4,900 kg, Fanuc 32i CNC – Model B WORKING RANGE Max. workable bar diameter: 45 mm Max. Machinable length: 220 mm Maximum workable length: 560 mm Maximum rotating diameter: 580 mm MAIN SPINDLE Maximum rotation speed: 5.000 rpm Spindle nose: ASA 5" Spindle bore: 52 mm Internal bearing diameter: 90 mm TAILSTOCK Tailstock taper: CM 5 with CM4 reduction B-axis rapid traverse: 15 m/min TURRET Number of positions: 12 Tool shank for external/internal: 20 x 20 mm – 25 x 25 mm – Ø32 Rotation time (1 position): 0.15 sec DRIVE TOOLS Number of positions: 12 Maximum rotation speed: 4.000 rpm Motor power: 3,7 kW Motor torque: 47 Nm C-AXIS Minimum programmable value: 0,001° Maximum rapid traverse speed: 100 rpm AXES X-axis travel: 170 mm Z-axis travel: 560 mm Y-axis travel: + 55 / – 50 mm B-axis travel: 490 mm X-axis rapid traverse: 20 m/min Z-axis rapid traverse: 24 m/min Y-axis rapid traverse: 6 m/min COOLANT Tank capacity: 250 l Ledpfxexqhaks Aabjah Pump flow rate: 230 l/min Pump motor power: 1.5 kW DIMENSIONS – WEIGHT Overall dimensions with chip conveyor: 4.240 x 2.000 x 2.020 mm Height of spindle center: 1.000 mm Weight with chip conveyor: 4.900 kg Equipment Machine: • 3-jaw Autoblock chuck, diam. 210 mm • Various motorized modules (axial + radial) • Operation and maintenance manuals and CE declaration of conformity

Condition: good (used), Year of construction: 2000, Daewoo Puma 230, year of manufacture 2000, Fanuc 18 iT control, turning length 548 mm, turning diameter 350 mm, 10-position turret, tailed tailstock, three-jaw chuck Ø 254 mm, tool measuring arm, swarf conveyor, coolant system, main spindle newly mounted, flat guides, Lodewx I Efjpfx Aabsah accessories,

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 2,200 h, machine/vehicle number: 7792, The advantages The machining spectrum was further expanded by flexible selection of the power-driven tools on the tool post of the SB-12/20R G. The main spindle is fitted by power-driven front drilling unit and saw unit as well as polygon unit and thread whirling unit. The use of power-driven tools on the rear side are now standard. FANUC 0i-TF control system C-axis control as standard on main and sub spindle completely independent backworking changeable from sliding head to fixed headstock lathe movable control panel low space requirement ideal replacement for cam-controlled lathes Kinematics & Tools 6 (7) turning tools front and rear side each with 4 drilling tools 4 + α power-driven tools on the tool post 4 + α power-driven tools for backworking 7 axes Kinematics of the SB-12R Front Side Number of axes 7 Main spindle (headstock) Z1 / C1 axis Tool post X1 / Y1 axis Max. machining diameter 12 mm Max. headstock stroke (sliding head / fixed headstock lathe) 205 mm / 30 mm Max. drive power 3.7 kW Max. main spindle speed 15,000 rpm Tools on the tool post Turning tools 7 tools (□ 10 mm) Drilling tools (4-spindle sleeve holder) 4 tools (ER16) Cross driven tools 4 (5) tools Speed 10,000 rpm Sub spindle Sub spindle X2 / Z2 / C2 axis Max. chucking diameter 12 mm Drive power 1.1 kW Max. sub spindle speed 12,000 rpm Backworking tools Ljdpelrvxwefx Aabsah Drilling tools (4-station tool holder) 4 tools (Ø 22 mm sleeve) Drive unit (standard) 4 tools (ER16) Max. speed backworking 8,000 rpm

Year of construction: 2004, condition: good (used), We are offering a Doosan Puma 2000 LSY with bar feeder: - Year 2004, 9,400 operating hours - Fanuc 18i-TB - LNS Servo 2 bar feeder - Tool measurement system - Chip conveyor - 12 tool stations - x, y, x, b = 250, ±50, 830, 830 Under power Laedexk Uz Iepfx Aabjh

Condition: new, The KNUTH Roturn 400 M is a highly advanced CNC Slant Bed Lathe positioned within the 2-axis CNC Lathes group. This machine combines modern technology with robust design, featuring a rigid inclined-bed configuration that enhances stability and chip removal efficiency. Equipped with the Siemens 828 D Basic control, it meets comprehensive control technology requirements, providing you with precision performance. The Roturn 400 M includes a hydraulic 3-jaw chuck, a 12-station tool turret with driven tools for versatile applications, and precise linear guides for high accuracy even under heavy loads. Additionally, the machine boasts an automatic central lubrication system, including a hinged belt conveyor and a powerful coolant system to ensure optimal operation. The spacious enclosed workspace is easily accessible, designed for user convenience and safety. If you're looking for a reliable CNC Slant Bed Lathe, request a quote for the Roturn 400 M today to elevate your machining capabilities in the lathe category. Ljdpfxexhfuge Aabsah

Condition: excellent (used), Year of construction: 2019, MAZAK QUICK TURN 250MSY Max. turning diameter: 380 mm Max. turning length: 511 mm Max. milling speed: 10,000 rpm Max. main spindle speed: 4,000 rpm Max. sub spindle speed: 6,000 rpm Max. bar capacity: 80 mm Machine equipped with: Laodpfsw Ihzqex Aaboh - Mazatrol SmoothG CNC control - KITAGAWA 3-jaw chuck for main spindle, diameter 254 mm - KITAGAWA 3-jaw chuck for sub spindle, diameter 169 mm - Tool Eye - C-axis - C-axis for sub spindle - Y-axis - Interface for bar feeder - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - 8 static tool holders - 2 driven tool holders

Condition: excellent (used), Year of construction: 2007, operating hours: 8,800 h, functionality: fully functional, Equipment: documentation/manual, The used HAAS SL 30 THE CNC lathe is a fast, medium-sized slant bed CNC lathe equipped with a tailstock, hydraulic 3-jaw power chuck, and a 12-position automatic turret. The configuration is completed with tool presetting, chip conveyor, programmable tailstock body, 250mm BB hydraulic 3-jaw chuck, and fixed tool holders. Main features: Lsdpfexiu D Tox Aabeah Maximum workpiece diameter: 350 mm Maximum workpiece length: 826 mm Maximum bar capacity: 76 mm Spindle speed: 3,400 rpm Spindle power: 30 HP Year of manufacture: 2007, with only 8,800 spindle hours. Machine compliant with "CE" standards.

Condition: used, Year of construction: 2005, Machine used for training purposes Emco E 65, year of manufacture 2005, control Siemens 840 D, travel X/Z 210/610 mm, Ljdpfx Aswv N Susabsah maximum bar capacity Ø 65 mm, driven tools, C axis, main spindle up to 4,200 rpm, 12-position turret, VDI 30 tool holder, tailstock, chip conveyor, coolant system, oil mist extraction,

Condition: excellent (used), Year of construction: 2005, turning length: 1,500 mm, CNC lathe STYLE - 510 x 1500 Revolver with Vdi 40 New software STYLE Version 2021? Closed housing 3 chuck 315 mm Under power Ledpfx Aasxlf Ihsbeah DBC Turning Length: 1500mm Swing over bed Ø: 510mm Swing over cross slide Ø:300mm Spindle bore: 80mm Spindle power: 16kW Bed width: 330mm Tailstock spindle Ø: 75Ø Stroke pinole: 160mm Spindle taper: 5Mk Speeds / ranges: 2500Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 3700mm Width: 1800mm Height: 1800mm Weight: 3250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1996, MAZAK SUPER QUICK TURN 10 MS CNC LATHE MAKE MAZAK, MADE IN JAPAN MODEL SUPER QUICK TURM 10 MS Lasdpoxnpp Ijfx Aabeh YEAR 1996 CONTROL MAZATROL T PLUS MAX SWING 435mm SWING OVER CARRIAGE 370mm MAX. MACHINING DIA 230mm MAX. BAR WORK DIA 42mm MAX DISTANCE BETWEEN SPINDLES 705mm SPINDLE MOTOR AC11kw (15HP) SPINDLE SPEED 6000rpm 2ND SPINDLE MOTOR AC5.5kw (7.5HP) 2ND SPINDLE SPEED 6000 rpm ROTARY TOOL MOTOR AC2.2kw (3HP) ROTARY TOOL SPEED 3000 rpm TURRET TOOL CAPACITY 12 TOOLS STATIONS RAPID TRAVERSE RATE X,Z:30m/min (1180IPM),C: 400rpm MACHINE DIMENSION L x W x H, 2705mm x 1465mm x 1835mm MACHINE WEIGHT 3850kg PLUS C-AXIS SUB SPINDLE DRIVEN TOOLS (3 NO.S) PARTS CATCHER SWARF CONVEYOR TOOL SETTING PROBE COLLET CHUCK BUILT IN TRANSFORMER FULL SET OF MANUALS GOOD WORKING ORDER

Condition: new, The Roturn 400 C is a high-performance CNC Slant Bed Lathe designed for precision and efficiency in the category of 2-axis CNC Lathes. This machine exemplifies the robust capabilities typical of the ROTURN C series, featuring advanced Siemens 828 D Basic control technology, which ensures compatibility with current standards. It is equipped with a powerful 15 kW main spindle motor, an 8-station tool turret for rapid tool changes, and a hydraulic 3-jaw chuck with a through-hole. The inclined bed design promotes rigidity and ease of chip removal, while precise linear guides enhance stability under high loads. A hydraulically operated tailstock with 85 mm stroke, automatic central lubrication, and a high-performance coolant system are among the included standard equipment. Buyers can expect a versatile machine that meets complex manufacturing demands. To explore the capabilities of the Roturn 400 C further, request a quote today for this CNC Slant Bed Lathe, and experience the advantages of investing in a quality tool from KNUTH. Laedou E Hytopfx Aaboh

Condition: good (used), Year of construction: 2005, functionality: fully functional, The machine is connected and in operation. The gantry loader is connected but not in operation. Control system: FANUC Series 21i-TB. The machine is supplied with tool holders on the turret head, including all accessories available with the machine. The machine does not have a tailstock; it has a main spindle and one turret head. Machine dimensions approx.: Length: 1600 mm, Width: 1280 mm, Height: 1890 mm, Weight: 2800 kg. Laodpfjxmvgdex Aaboh

Condition: used, Year of construction: 2009, Control system, manufacturer GE Fanuc, 7 axes (X1, Z1, Y1, C1, X2, Z2, C2), bar diameter Ø32 mm, machining length main spindle / sub-spindle 310 / 200 mm, max. speed 8,000 rpm, tooling system with up to 23 tool stations, driven tool stations, coolant system by Knoll, type KF110, belt filter, CO2 extinguishing system by Kraft + Bauer, bar feeder by FMB, type Turbo 3-36, serial no. 261209, length 4,200 mm, accessories: sheet steel cabinet Laedpfxow A Ryye Aabeh +++ Attention: Item is part of an online auction! +++

Condition: good (used), Year of construction: 2000, Traub TNE 300, year of manufacture 2000, Ledpfxew Dp H Ij Aabeah control TX 8 H, travel X/Z 210 / 450 mm, turning length 450 mm, turning diameter 275 mm, 8-position turret, three-jaw chuck, spindle speed up to 4,000 rpm, drive power 11 kW, spindle bore 65 mm, chip conveyor, machine without the visible bar feeder,

Condition: used, Year of construction: 1998, turning diameter 500 mm Ledpfx Aasw E Nplebjah turning length 1000 mm control Heidenhain Manual Plus M swing diameter over bed slide 280 mm spindle bore diameter 63 mm number of controlled axis 2 turning speed range 1- 2500 U/min rapid speed 10/7 m/min number of tapers in turret head 2 Multifix "B" tail stock MK 5 power requirement 7,5 kW weight of the machine ca. 3,2 t dimensions 2,8 x 1,75 x 1,57 m Used Teach In CNC- lathe - coolant system - 2x Multifix "B" station - 3 jaw chuck Ø 200 mm - some tool holders - two steady (2 point/ 3 point) - 4-jaw chuck - two gear steps

Condition: new, The Roturn 402 C, a cutting-edge CNC Slant Bed Lathe, exemplifies the robust performance and precision that KNUTH machines are known for. Incorporating the Siemens 828 D Basic control, this CNC production lathe is designed to meet the demands of modern machining technology. Its inclined bed design coupled with an 8-station tool turret and a powerful 15 kW main spindle motor ensures efficient operation and versatility. The machine can handle workpieces with a maximum turning diameter of 400 mm and length of 420 mm. Moreover, it features a reliable hydraulic 3-jaw chuck with a through-hole and a hydraulically operated tailstock, both key for precise machining. The standard equipment package includes a high-performance coolant system, an automatic central lubrication system, and a hinged belt conveyor to facilitate effective chip removal. With its substantial machine frame and precise linear guides, the Roturn 402 C is engineered for stability and accuracy, even under heavy loads. For those seeking a reliable and efficient CNC Slant Bed Lathe, the Roturn 402 C is an excellent investment. Request a quote today to enhance your machining capabilities. Ledeng Ah Rspfx Aabsah

Condition: good (used), Year of construction: 1999, turning length: 635 mm, Gildemeister CTX 400 Series 2, year of manufacture 1999, Heidenhain CNC Pilot control, travel X/Z 220/635 mm, Laodpfx Aewx H T Ieaboh turret with 12 positions / 6 driven stations, VDI 30 mounting, C axis, three-jaw chuck Ø 200 mm, tailstock, swarf conveyor, coolant system 6 bar, including accessories, driven tools,

Condition: good (used), Year of construction: 2001, Benzinger TNI B6, Year of manufacture 2001, Siemens 840 D control system, max. bar machining up to 42 mm, Main / counter spindle with C axis, spindle speed up to 6,000 rpm, Turret 1 Y axis 70 mm, turret 1/2 16/12 times, all 28 stations driven, Hydrobar bar loader 3m, Lajdpfeu Hlcpox Aabjh Parts removal transport system, chip conveyor, high pressure cooling,

Condition: good (used), Year of construction: 2000, Emco Emcoturn 365-65, Year of manufacture 2000, Siemens 810 D control system, Lajdpfx Ajwd E N Sjaboh X/Z travel 210/610 mm, 12-station VDI 30 turret, all stations driven, driven tools up to 4,000 rpm, collet chuck, tailstock, C-axis 0.001°, spindle speed up to 6,300 rpm, coolant system, chip tray, accessories, Machine has exclusively machined aluminum and brass, Machine is available at short notice.

Condition: good (used), Year of construction: 2008, Weiler DZ 40, year of manufacture 2008, Siemens 840 D control, travel X/Z 200/350 mm, Y axis +/- 25 mm, tailstock MK 4, main spindle max. bar capacity 42 mm, spindle bore 52 mm, rapid traverse X/Z/Q 30/30/20 m/min, 16-position turret – all stations driven, shank diameter 25 mm, driven tools up to 4,500 rpm, parts tray, accessories, driven toolholders, rigid holders. Ljdpfoxnna Sex Aabeah

Condition: good (used), Year of construction: 2000, Gildemeister CTX 400, year of manufacture 2000, Heidenhain control, turning length 640 mm, turning diameter 470 mm, 12-position turret without driven tools, VDI 30 mounting, tailstock, chip conveyor, Schunk three-jaw chuck Ø 230 mm. Lasdpfx Aajw E H I Eeboh