Used Cnc Gear Hobbing Machine for sale (70,520)

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 400 mm, The design of the basic machine is characterized by the following features: - Horizontal arrangement of the workpiece spindle; vertical arrangement of the milling spindle or milling head - The workpiece is held between the workpiece spindle housing (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The swivel milling head is equipped with an automatic angular adjustment (A-axis); the swivel slide (Y-axis) moves tangentially to the workpiece diameter TECHNICAL DETAILS Travel range, X-axis: 140 mm Travel range, Y-axis: 100 mm Travel range, Z-axis: 300 mm Tailstock travel, W-axis: 420 mm Swivel angle, end mill head, A-axis, left: 50° Swivel angle, end mill head, A-axis, right: 60° Largest module that can be milled with involute cutters according to DIN 8002: 4.5 mm Largest module that can be milled for high-performance milling: 3.0 mm Number of teeth: 2–999 Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Workpiece length: max. 400 mm Milling spindle speed range, B-axis: 0–1,500 rpm Workpiece speed, C-axis: 0–350 rpm Milling tool data Milling tool diameter: 40–102 mm Milling tool length: max. 230 mm Radial front diameter (standard): 16–32 mm Cjdpfx Ajzwmyieizjri Milling coordinates Z-axis: 100–400 mm X-axis: 130–150 mm Y-axis (face of milling spindle): 50–230 mm W-axis (face of tailstock spindle): 165–585 mm Feed rate, X-axis: 3,500 mm/min Feed rate, Z-axis: 3,500 mm/min Feed rate, Y-axis: 4,000 mm/min Feed rate, W-axis: 5,500 mm/min Feed rate, V-axis (portal loader): 80,000 mm/min EQUIPMENT IBH control system Loading device A wide range of accessories

Condition: used, Year of construction: 1994, Used CNC gear hobbing and milling machine Pfauter P800 / 1200 Cjdpjz H Nuxofx Aizeri For gear milling of spur and bevel gears.

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 180 mm max. module: 7 hob turning speeds: 200-2000 U/min min. number of teeth: 4 Csdpfxeyzxbij Aizeri excluding conveyor belt *

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 80 [mm] - Z-axis travel : 220 [mm] - Max module : 2.5 - Max workpiece-holding spindle speed : 3000 [rpm] - Max dimensions of the hob (diameter x length) : 118 X 120 [mm] - Speed of the hob-holding spindle : 200-5000 [rpm] - Shifting travel : 140 [mm] Credpjyuzgaefx Aizei - Angular travel of hob-holding headstock : -45/+115 [°] - Machine floor space : 2700/2180 [mm] - Machine height : 2310 [mm] - Machine weight : 4800 [kg] EQUIPMENT - CNC : Siemens 840D PowerLine - Loading manipulator

Condition: used, Year of construction: 1970, max. wheel diameter 1600 mm gear width 660 mm max. module 16/18 number of milling spindle turning speeds 18 number of feeds 18 total power requirement 12 kW weight of the machine ca. 20 t The machine's electrical system was renewed. Cedpfxez Rqnvo Aizsri

Condition: like new (used), functionality: fully functional, workpiece weight (max.): 3 kg, feed length X-axis: 100 mm, feed length Y-axis: 100 mm, feed length Z-axis: 200 mm, workpiece diameter (max.): 180 mm, milling length: 200 mm, overall weight: 5,000 kg, rotational speed (max.): 3,000 rpm, rotational speed (min.): 400 rpm, tool diameter: 80 mm, Equipment: documentation/manual, rotational speed infinitely variable, This machine is completely dismantled and rebuilt from the ground up. During the overhaul, it undergoes comprehensive modernization with state-of-the-art technology and the latest premium-quality components. Following refurbishment, the machine is presented in a technical and visual condition equivalent to new – reliable, high-performance, and future-proof. Codpfjx Af A Hjx Aizsri The equipment and configuration can be tailored individually to your requirements, ensuring maximum productivity in your production environment.

Condition: good (used), Year of construction: 1976, max. wheel diameter 2300 mm gear width 1000 mm max. module 22 min. module 1 total power requirement 45 kW weight of the machine ca. 22 t Csdezr Rpdopfx Aizsri dimensions of the machine ca. 5x3x4 m

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 420 mm Z-axis travel: 480 mm Table length: approx. 3,000 mm Table width: approx. 500 mm Spindle speed: up to 6,000 rpm Tool holder: SK 40 Tool positions: 22 Crjdpfe Afxrqox Aizsi MACHINE DETAILS Control system: Heidenhain TNC 407 EQUIPMENT 22-position tool changer Coolant system Heavy-duty frame construction Additional angular/universal milling head 4/5-axis machining possible

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5-K/500 -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm Accessories: Includes extensive accessories (see photos) -Not included: Template for helical gearing Cedjv Dtmmepfx Aizori -Machine dimensions: 2300/1460/H1870 mm -Accessory dimensions: Pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories

Condition: used, Year of construction: 1977, max. wheel diameter 400 mm gear width 280 mm max. module 1 min. module 4 Crjdpfx Aet Hw Hxeizji total power requirement 15 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler Csdpew Rrb Hefx Aizsri - Technical documentation

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. Credpfoymf Dasx Aizei - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens 840D max. workpiece dia. 1600 mm max. module 20 mm tip circle diameter 350 mm weight of the machine ca. 33500 kg dimensions of the machine ca. 10,53 x 6,38 x 4,68 m Technical details: - x-travel: 900 mm - y-travel: 300 mm - z-travel: 1000 mm - Control system: Siemens Sinumerik 840D - Workpiece diameter - max.: 1600 mm Csdpfx Aewzypueizjri - Module - max.: 20 mm - Head circle diameter: 350 mm - Milling spindle diameter: 375 mm - Total power consumption: 80 kVa - Machine weight approx.: 33500 kg - Space requirement approx.: 10.530 x 6.375 x 4.680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in 1/min: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - Motor milling head M 2 - Milling mandrels - Oil cooler - Technical documentation

Condition: used, Year of construction: 2006, Technical details: max. wheel diameter: 300 mm max. module: 7 weight of the machine ca.: 15 t Csdpfx Aioyz Sd Rozjri table turning speeds: 100 U/min table diameter: 180 mm hob turning speeds: 750 U/min max. hob diameter: 300 cutter length max.: 230 mm Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion *

Condition: ready for operation (used), Year of construction: 1981, Stankoimport gear hobbing machine 5K328A Year of manufacture: 1981 Max. diameter of the gear wheel: Credpfx Aszq Sq Heizoi - with counterbeam: 800 mm - without counterbeam: 1250 mm Max. module: 12 mm Max. width of the gear wheel: 560 mm Min. number of teeth: 20 Helix angle: +/- 60 degrees Table diameter: 935 mm Max. weight on the table: 2000 kg Hob arbor taper: Morse 6 Hob arbor speed range: 32 - 200 RPM Working feeds: - vertical: 0.5 - 5.6 mm/rev - radial: 0.22 - 2.6 mm/rev - tangential: 0.07 - 2.58 mm/rev Main electric motor power: 10 kW Net weight of the machine: 14 tons Change gears, arbors, and support available! Video of the machine in operation available!

Condition: ready for operation (used), Gear shaping machine STANKO 5M150 Max. diameter of gears that can be cut: 800 mm Max. module: 12 mm Max. cutter stroke: 200 mm Saddle indexing gear diameter: 360 mm Distance between axes (tool and table): 0-700 mm Largest tool diameter: 200 mm Cutter arbor diameter: 44.443 mm Taper: M5 Table diameter: 800 mm Distance from floor to table: 870 mm Indexing gear diameter: 762 mm Table hole diameter: 120A mm Double stroke per minute (s.p.m.): 33-188 mm Range of table feed rates per cutter double stroke: -Circular: 0.2-1.5 mm -Radial: 1-5.4 mm Table rapid rotation speed: 1.7 rpm Table rapid travel speed: 137 mm/min Cutter rapid rotation speed: 3 rpm Main electric motor power: 4.8; 5.7; 7.5 kW Dimensions: 3100x1800x3500 mm Weight: 10200 kg Crodsqcvkvspfx Aizei

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. Cjdpfx Aot Hw D Rjizeri The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: ready for operation (used), In very good condition. Cjdpfxj Ah Emle Aizori

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) Crodpfxoznwu Sj Aizsi - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: used, Year of construction: 1987, max. wheel diameter 4400 mm gear width 645 mm max. module 35 Control Siemens main drive motor 37 kW table diameter 2500 mm ical angle +/- 30 ° workpiece weight 40000 kg total power requirement 142 kVA weight of the machine ca. 75 t Partial overhaul 2006 5 controlled axes a, c, x, y, z Max. gear outer diameter 3000 mm Max. outer diameter for internal gears 3560 mm Max. module with hobs 30 Max. module with internal form cutters 18 Min. gear diameter 900 mm Axial feed travel 1800 mm Largest axial slide travel 1800 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Credpfx Aieyqt S Hozei We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x310x245 cm weight of the machine ca. 5,0 t Specifications: - Maximum wheel diameter: 400 mm - Min. module: 1 - Max. module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter strut: 400 mm Codpfx Aisu A I Elozeri - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. tooth helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Axial feed continuously adjustable: 0.2-10 mm/rev - Tangential feed continuously adjustable: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Gewicht - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (normal) 2950 mm with DC drive 3350 mm - Width: 3100 mm - Height Machine: 1980 mm Electrical cabinet approx.: 2200 mm Machine with DC drive approx.: 2150 mm

Condition: refurbished (used), functionality: fully functional, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Max. workpiece diameter over saddle: 250 mm Max. workpiece diameter over bed guideway: 500 mm Spindle bore: 102 mm Tailstock quill travel: 100 mm Main motor: 4.0 kW Cross-feed motor (X-axis): 4.3 kW Longitudinal feed motor (Z-axis): 3.8 kW Electrical configuration Csdsw Hquxopfx Aizori Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control (PLC) for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard accessories: • Standard thread milling attachment ApG • Max. milling diameter: 150 mm • Spindle taper: Morse 3 • Max. module for hobbing: Module 3 • Min./max. number of teeth for hobbing: 4–50 Options: • Hobbing attachment ApFW Hobbing of parallel and helical profiles up to module 7 Max. milling diameter: 150 mm Spindle taper: Morse 4 • Heavy-duty thread milling attachment ApGS Hobbing of parallel and helical profiles up to module 5 Max. milling diameter: 150 mm Spindle taper: Morse 4

Condition: excellent (used), max. wheel diameter 130 mm gear width 180 mm max. module 2,5 min. module 0,3 turning speeds 140 - 900 U/min min. number of teeth 4 clamping length max. 200 mm Control Siemens max. workpiece diameter 80 mm total power requirement 3,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 1,8 x 1,6 x 1,9 m Codey Umizopfx Aizeri

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 80/120 mm max. module: 2,5 max. top circle diameter: 65 mm : 22 mm Crodpfoxrwpkox Aizei : 140 mm : 120 mm slide travel axial ( Z-axis ): 320/400 mm Dimensions (L/W/H): 3270 x 3240 x 2020 mm weight of the machine ca.: 6 t P60 - The compact all-rounder for wheels, shafts and worms The P60 is the smallest machine in the Gleason line of horizontal hobbing machines. The all-rounder not only mills spur gears with all rollable profiles, but is also the optimal solution for machining steering pinions and worms. with automatic loading system, extraction unit, chip conveyor, with balancing device with 2 tailstocks, with Artec process monitoring system, type CTM-BT1.1 *

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 280 mm max. module: 7 weight of the machine ca.: 13 t table turning speeds: 100 U/min table diameter: 250 mm min. number of teeth: 4 hob turning speeds: 1500 U/min max. hob diameter: 160 cutter length max.: 230 mm Credeyzxbcjpfx Aizsi Machine in good condition. Available 01.08.2024 *