➤ Used Cnc Turning And Milling Machine for sale 🏷️ on Machineseeker India ⚙️✔️

Listing

Albion Works, Savile St, Sheffield S4 7UD, UK

7,565 km

CNC Horizontal Boring & Milling machine

Giddings and Lewis MC50 Twin Pallet HBM

Call

Condition: like new (used), Year of construction: 1987, USED GIDDINGS AND LEWIS MODEL MC 50 TWIN PALLET HORIZONTAL MACHINING CENTRE WITH LIVE SPINDLE, 60 ATC AND G&L 8000A CONTROL SYSTEM. Serial # 445-1052.YEAR OF MANUFACTURE: 1987 MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPINDLE DIAMETER 130 MM SPINDLE TAPER 50 ISO SPINDLE TRAVEL (Z AXIS) 915 MM SPINDLE SPEEDS (4 RANGES) 5 to 1500 RPM MAIN MOTOR 30 HP PALLET SIZE 1219 x 1245 MM PALLET ROTATION INCREMENTS 0.001 DEG (360,000 POSITIONS) Ccw33ul8jo PALLET CHANGER MAX LOAD 5000KGS PALLET MAX LOAD WITHOUT APC 9000KGS LONGITUDINAL TRAVEL (W) 1700 MM VERTICAL TRAVEL OF HEAD (Y) 1500 MM CROSS TRAVEL (X) 1800 MM FEED RATES PER MINUTE 1.00MM/MIN TO RAPID RATE RAPID TRAVERSE RATE PER MINUTE (X AND Y) 4500 MM / MIN RAPID TRAVERSE RATE PER MINUTE (Z AND W) 3000 MM / MIN AUTO TOOL CHANGER 60 POSITIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT HIGH PRESSURE (25 Bar) THROUGH SPINDLE COOLANT, HIGH TOLERANCE MACHINE. ACUURATE MACHINE WHICH WAS WEWLL MAINTAINED AND REGULARLY CALIBRATED BY MANUFACTURER. RENISHAW PROBING. LENGTH 11679 MM WIDTH 6502 MM HEIGHT 4423 MM WEIGHT 40329 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

more

Listing

Beringen

6,886 km

CNC Turning & milling machine

HAAS SL30-THF

Call

Condition: excellent (used), C-axis, driven tools HAAS Control Turning diameter max 432 mm Turning length 864 mm Swing Diameter 760 mm Bhascuial2w Spindle speeds 30-3'400 rpm Turret head: 12 driven positions Tool presetting device Misc. accessories MARCELS MASCHINEN CH

more

Listing

Lahti

6,081 km

cnc turning and milling machine

DOOSAN MX2100ST

€1,55,000

Fixed price plus VAT

Call

Condition: like new (used), Year of construction: 2010, FANUC Series 31i model A control Mainspindle + subspindle 2x c-axis Millingspindle Max. 12.000 rpm B-axis: 240° Y-axis: 160 mm ATC 40 tools Capto C6 system Lower turret, 12 toolstation BMT-65P Lower turret 12 driven tool station Parts unloader incl. conveyor Pneumatic parts ejector High pressure coolant th. spindle, 20 bar Toolsetter Tools !!! Swarf conveyor Barfeeder, Iemca KID 80, S/No. 021009QA06 Cfsa7zw08b Machine Dimensions 4.520 mm x 2.300 mm x 2.600 mm Machine Weight 12.500 kG

more

Listing

Székesfehérvár

6,139 km

Cnc turning milling machine

Mazak Integrex 30

Call

Condition: excellent (used), Year of construction: 1999, Controller Mazatrol PC-Fusion-CNC 640MT Turning length 1500 mm Turning Ø510 mm Ø above the bed 510 mm Ø above transversing slide 470 mm Length between centers 1500 mm Isqtwme X-axis 180 mm Y-axis +/- 90 mm Z-axis 1029 mm C axis 360 degree Type of Spindle bore 88 mm Number of tools on turret 80 (40x turning + 40x milling holder) Number of rotating tools 40 Turning tool holder KM63 Milling tool holder SK40 Turning speed 3500 rpm Spindle motor power 22 kW Tailstock no Bar feeder no Weight 7200 kgs Length x width x height LxWxH = 3500 × 3180 × 2800 mm Accessories - Coolant unit - 10 x turning tool holders - 10 x milling tool holders - Manuals

more

Listing

Schweiz

6,913 km

CNC Turning & milling machine

GILDEMEISTER Twin 42-II

Call

Condition: good (used), Year of construction: 2003, Sub-spindle, Y-axis, B-axis Bsnduycjkz SIEMENS 840D Powerline Turning diameter max 200mm Turning length -635mm Swing Diameter -250mm Spindle speeds main & sub-spindle 20-7000 rpm Turret head 1+2: 12 driven positions B-Axis, upper turret head +135/-45° Misc. accessories MARCELS MASCHINEN CH

more

Listing

CNC Bridge Milling Machine Nicolas Correa FPM-60

Manlleu, Barcelona, España

7,425 km

CNC Bridge milling machine

CNC Bridge Milling Machine Nicolas Correa FPM-60

Call

Condition: good (used), Year of construction: 1992, double head bridge milling machine correa fpm 60 (gantry milling machine) characteristics brand nicolas correa model fpm-60 working dimensions useful area 9000 x 2000 mm distance between uprights 3000 mm number and width of t-slots 8 x 28 x h12 mm distance between slots 250 mm automatic slide travel x axis travel (longitudinal) 9000 mm z axis travel (vertical) 5000 mm y axis travel (transversal) 1000 mm w axis travel (quill) 200 mm a axis travel (head rotation) +90º / - 100º travel axis c +/-200º frontal chuck with shank with head 4th and 5th axes cone type iso 50 iso 50 power 42 kw 15 kw number of ranges 2 2 rotation speed *a part constant from *a constant power from 20-2000 rpm (3200 nm) 20-125 rpm (42kw) 125-2000 rpm 25-4000 rpm (573nm) 25-250 rpm (15kw) 250-4000 rpm working feeds (x-y-z-/w shank) 2 to 6000 / 5000 mm /min rapid: (x, y, z) 8000 mm/min rapid: w (quill) 5000 mm/min axes: a and c (headstock) 1125º/min torque feed motors: (x/y/z axes) 37 nm torque feed motors: w axis (shank) 14 nm torque feed motors: a and c axes (head) 18 nm Irmfijhd8

more

Listing

RicoCNC edgebander PCD pre milling cutter heads

Suzhou Shi

4,319 km

Edgebander Machine parts

RicoCNC edgebander PCD pre milling cutter heads

Call

Condition: new, WhisperCut Pre-Mill Cutter Aluminum Jointing Milling Cutters with PCD inserts for Edgebanders This WhisperCut is a low-weight PCD jointing head for edgebanders pre-milling. It is aluminum jointing milling cutter with replaceable/sharpenable precision PCD diamond inserts. The light-weight aluminum alloy cutter body reduces machine spindle wear and inserts design damping cutting noise. Rfiptkva It is possibility to change position of the cutter tips to have symmetrical or asymmetrical cutter. Poly-Crystalline Diamond (PCD) inserts, durable use, and can reduce your tooling cost. Changeable and sharpenable PCD inserts, easy to use. PCD jointing cutter suitable to work on chipboard panel, coated, laminated, veneered, particleboard, MDF, plywood, etc. WhisperCut Pre-mill Cutters Technical Information: Aluminum body, low weight, low noise Exchangeable PCD inserts Symmetrical or Asymmetrical designs available Used on Homag, Brandt, IMA, Biesse, Holz Her, Chisa, IMA Advantage edgebanding machines RicoCNC supplies a range of advantage tools and tooling systems for woodworking, such as CNC routers, edgebanders, CNC drills, etc. It is a reliable source for brands machines such as Biesse, Homag, Brandt, IMA, SCM, Holz-her, KDT, Nanxing, Laguna, Giben, etc. If any needs, welcome your inquiry.

more

Listing

Italie

6,576 km

milling machine

PARPAS CNC BRAVE 6000 x 1200 x 2100

Call

feed length X-axis: 6,000 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 2,100 mm, Condition: good (used), Year of construction: 2007, Functionality: unexamined, 2007 PARPAS BRAVE MOBILE MOUNT MILLING MACHINE cnc selca 4060 D + RCTP STATICO + VOLANTINO SELBO X2 X 6000 Y 1200 Z 2100 Onwermnzm FAST on all axes 30m/min automatic head with continuous positioning spindle center coolant ISO 50 - 6000 rpm - 30kw head cooler without tool magazine chip conveyor.

more

Listing

Chemnitz

6,584 km

cnc turning and milling center

CNC-Drehmaschine Gildemeister NEFCT40

Call

Condition: good (used), Year of construction: 1988, machine/vehicle number: 08885, CNC-Drehmaschine, Hersteller Gildemeister, Typ NEFCT40 mit Steuerung, div. Zubehör Bhg9bgflgem Baujahr 1988 betriebsbereit Maschinennr. 08885 CNC lathe, manufacturer Gildemeister, type NEFCT40 with control, various accessories Year of construction 1988 ready for operation machine number 08885

more

Listing

Beinwil am See

6,915 km

Tool room milling machine

CNC Fräsmaschine VMC 650

€69,000

ONO plus VAT

Call

travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, spindle speed (min.): 10,000 rpm, Condition: as good as new (ex-display), Year of construction: 2023, Operating hours: 100 h, machine/vehicle number: 20230519, For sale is a new CNC milling machine 4 axes in perfect condition. Key data about the machine: - Year 2023 - Travel X,Y,Z: 650x400x500 mm - Table size: 800x400 mm B2nhg98hii - Siemens control - 24-fold tool changer - 4th axis - Tool probe - 3D probe - Spindle BT40 10000rmp - Spindle oil cooler The machine is available for viewing in the Swiss canton of Aargau. You are welcome to make an appointment.

more

Listing

Drachten

7,066 km

Milling machine

Brown and Sharpe No 2

Call

Condition: good (used), Used fras machine from Brown and Sharpe Type: No 2 Incl. sharnk with accessories Digital reading Csxrd7xmtw

more

Listing

Albion Works, Savile St, Sheffield S4 7UD, UK

7,565 km

Plano Milling machine

Noble and Lund model P/RLMA

Call

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM Bs3tykri WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

more

Listing

Doulton Rd, United Kingdom

7,615 km

CNC Bed milling Machine

XYZ Machine Tools SMX 3500

Call

Condition: like new (used), Year of construction: 2013, XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm BT40 Quill Dia 105mm Bcvjrayrnx2 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm. Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2013 Jet Machinery Stock Number: #78678 Machine Serial Number: 11873 £24,950.00 + VAT

more

Listing

Geldern

(dealership location)

7,046 km

CNC portal milling machine / CNC Router

CNC-STEP CNC Portalfräse T-Rex N-0609

€10,240

Fixed price plus VAT

Call

Condition: new, With the T-Rex N-0609 portal milling machines you buy mature technology and long-proven technology combined in one portal machine Machine with CNC control, CADCAM software, control software, control panel, manual central lubrication, multi-zone vacuum table. Due to the robust steel frame construction, vibrations can be damped during the machining process. Thus, the machined workpiece gets clean cutting edges and surfaces. The CNC portal milling machine with helical racks and HWIN / THK / PMI linear slides has a solid cast steel frame. The portal milling machine enjoys great popularity with its robust construction and high stability. Due to the compact base, the machine is ready for use directly at waist height, eliminating the cost of a base as an additional purchased element. Further advantages of the T-Rex portal milling machine Compared to the CNC milling machine from the High-Z T series, the T-Rex portal milling machine has a 100mm greater clearance height between the grooved plate and the Z axis. In this case, the plate material can also be a little thicker in order to still fit under the bridge. This means that you are buying a machine that is unparalleled in its price class, with outstanding precision combined with high stability, maximum ease of operation and an attractive appearance. Travel X-axis 900 mm Y-axis travel 600 mm Z-axis travel 200 mm Passage height 200 mm (optional 300/400mm) Clamping surface X / Y on grooved plate 930 x 630 mm length x width x height 165 x 144 x 195 cm Iteunet Weight 650 kg backlash +/- 0,015 Repeatability ± 10 ?m feed speed 17.000 mm/min Working speed max. 12.000 mm/min

more

Listing

Geldern

(dealership location)

7,046 km

3D CNC MILLING MACHINE

CNC-STEP High-Z S-400/T

€2,979

Fixed price plus VAT

Call

Condition: new, Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine With the purchase of the T-variation of High-Z cnc-router you get a proven technology. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you’re able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3D outlines. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-engraving-machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller. A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter. Basic equipment of all High-Z CNC-milling machines: Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !! To use the software CAD CAM ConstruCAM in full screen, you need the milling software version WIN PCNC Economy upward Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !! ----- Equipment / Productdetails: •Drive : 4 stepping motor by Nanotec with 2000 steps/rev (1/10 Step) •2 motors for constant tension and compression during milling operation on X-Axis •Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface •Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle •Ball bearings at both sides of ball screws on X and Y axis •Traverse speed of rapid feed: max. 7000 mm/min •Technical resolution : 0,00625 mm ( 1/8 Schritt ) •Reversal error max.: +/- 10µm ( 0,01mm ) Zjhpdyxl •Table size / clamping area: 730 x 400 mm •Traverse Paths: X=400 mm; Y=280 mm; Z= 110 mm •Reference- and limit switch on all axes •Double safety emergency stop button •Energy chain for clean cabling •Total dinemsions incl motors: L x W x H = appr. 730 x 520 x 500mm •Milling Motor anchorage: Euroneck Ø43mm •incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional) •incl. Software ConstruCAM-3D limited ( recommended sell price 1902.81 EUR) •Modular frame for universal application •Weight appr. 31 kg •Complete machine Included 5 driver microstep controller 5 x 3,5 Amps (Zero3) •An approx. 30-minute long introduction during pick up and an unlimted telephone support are included. •An approx. 2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too. ----- Technical data contained in the price TÜV-certified control system, tailored to the CNC milling machine / CNC engraving machine: • 4-Channel Stepper motor -CNC-Controller with actual SMD-Technology • Main voltage 115 - 240 Volt / 47 - 63 Hz. • Motor current 4 x 3,5 Amper

more

Listing

Geldern

(dealership location)

7,046 km

WOOD CNC ROUTER 3D MILLING MACHINE

CNC-STEP High-Z S-1000/T

€3,909

Fixed price plus VAT

Call

Condition: new, Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you’re able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3D outlines. All cnc-routers / cnc-milling-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller. Basic equipment of all High-Z CNC-milling machines: Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !! Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !! ----- Equipment / Productdetails: • Drive : 4 stepping motor by Nanotec with 1600 steps/rev (1/8 Step) • 2 motors for constant tension and compression during milling operation on X-Axis • Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface • Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle • Ball bearings at both sides of ball screws on X and Y axis • Traverse speed of rapid feed: max. 7000 mm/min • Technical resolution : 0,00625 mm ( 1/8 Schritt ) • Reversal error max.: +/- 10µm ( 0,01mm ) • Table size / clamping area: 1300 x 700 mm • Traverse Paths: X=1000 mm; Y=580 mm; Z= 110 mm • Reference- and limit switch on all axes • Double safety emergency stop button • Energy chain for clean cabling • Total dinemsions incl motors: L x W x H = appr. 1320 x 840 x 500mm • Milling Motor anchorage: Euroneck Ø43mm • incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional) • incl. Software ConstruCAM-3D limited( recommended sell price full version 1902.81 EUR) • Modular frame for universal application • Weight appr. 51 kg • Complete machine Included 5 driver microstep controller 5 x 3,5 Ampere (Zero3) • An approx. 30-minute long introduction during pick up and an unlimted telephone support are included. • An approx. 2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too. ----- Technical data contained in the price TÜV-certified control system, tailored to the CNC milling machine / CNC engraving machine: • 4-Channel Stepper motor -CNC-Controller with actual SMD-Technology • Main voltage 115 - 240 Volt / 47 - 63 Hz. • Motor current 4 x 3,5 Ampere Zjhraz2n • Microstep controller Resolution 1/10-Step / 2000 Steps/Rev. • 4 Connections for 4 brushless Motor / Stepper motor • Connection with parallel port and Software WIN

more

Listing

Geldern

(dealership location)

7,046 km

3D-CNC ROUTER MILLING MACHINE Fresatrice

CNC-STEP High-Z S-720

€2,479

Fixed price plus VAT

Call

Condition: new, Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs…..you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller. A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter. Basic equipment of all High-Z CNC-milling and engraving machines / routers: Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !! To use the software CAD CAM ConstruCAM in full screen, you need the milling software version WIN PCNC Economy upward Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !! ----- Equipment / Productdetails: •Drive : 4 stepping motor by Nanotec with 1600 steps/rev (1/8 Step) •2 motors for constant tension and compression during milling operation on X-Axis •Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle •Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface •Ball bearings at both sides of trapezium spindles Tr. 12x3 mm flank lead •Traverse speed of rapid feed: max. 2500 mm/min •Technical resolution: 0,00187 mm ( 1/8 Schritt ) •Reversal error max.: +/- 30µm ( 0,03mm ) Bzbfv •Table size / clamping area: 1050 x 520 mm •Traverse Paths: X=720 mm; Y=420 mm; Z= 110 mm •Reference- and limit switch on all axes •Double safety emergency stop button •Energy chain for clean cabling •Total dinemsions incl motors: L x W x H = appr. 1070 x 690 x 500mm •Milling Motor anchorage: Euroneck Ø43mm •incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional) •incl. Software ConstruCAM-3D limited ( recommended sell price full version 1902.81 EUR) •Modular frame for universal application •Weight appr. 41 kg •Complete machine Included 5 driver microstep controller 5x 3,5 Ampere (Zero3) •An approx. 30-minute long introduction during pick up and an unlimted telephone support are included. •An approx. 2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too. ----- Technical data contained in the price TÜV-certified control system, tailored to the CNC milling machine / CNC engraving machine: • 4-Channel Stepper motor -CNC-Controller with actual SMD-Technology • Main voltage 115 - 240 Volt / 47 - 63 Hz. • Motor current 4 x 3,5 Ampere • Microstep controller Resolution 1/10-Step / 2000 Steps/Rev. • 4 Connections for 4 brushless Motor / Stepper motor • Connection with parallel port and Software WIN PCNC Light, Economy or USB with WIN PCNC USB or Profi version. ( Also possible:MACH3, USBCNC, NC-Easy LINUX

more

Listing

CNC-STEP CNC Fräsmaschine T-Rex Servo-0609

Geldern

(dealership location)

7,046 km

CNC portal milling machine 900x600

CNC-STEP CNC Fräsmaschine T-Rex Servo-0609

€13,230

Fixed price plus VAT

Call

Condition: new, With the servo motor milling machine T-Rex Servo-0609 you buy mature technology and long-proven technique combined with trend-setting servo motor technology. Machine with control panel incl. control system, multi-zone vacuum table, manual central lubrication, CADCAM software, control software Machine dimensions 1650 x 1440 x 2050 mm traversing range 900 x 600 x 200 mm clamping area 930 x 630 mm Passage height Z 220 mm (optional 320 / 420 mm) Weight approx. 700 kg Backlash approx. 0.02 to 0.03 mm Repeat accuracy approx. 0.01 mm Rapid speed diagonal max. 50,000 mm per min. Working speed diagonal max. 35.000 mm per min Drive type Servo motors Yaskawa 400 Watt Linear guides width 20 mm (optional 25 mm) The servo motor CNC milling machine T-Rex Servo-0609 with helical racks and HWIN / THK / PMI linear slides has a solid steel frame. The portal milling machine enjoys great popularity with its robust construction, high stability and extensive basic equipment. Due to the robust steel frame construction, vibrations can be damped during the machining process. Thus, the machined workpiece receives clean cutting edges and surfaces. Further advantages of the servo motor milling machine T-Rex Due to the installed servo motors, high efficiency is brought into the production. Besides, there is a high time-saving in clamping, machining and maintenance. A 200mm high clearance between the vacuum table and the Z-axis also makes it easy to machine taller panel materials, as they fit under the bridge without effort. Versatile applications Lyk2j T-Rex Servo-0609 servo motor milling machine is not only suitable for precise milling work but can also be used for drilling, cutting or engraving. Massive components and the high quality of processing of mechanical components allow the production of workpieces from various materials! Due to the built-in helical racks, the T-Rex servo-mills achieve fantastic accuracy and immense speed and are also very flexible in special sizes and can also be manufactured to customer specifications. CE-compliant commissioning of our CNC milling machines requires the installation of a protective enclosure and exhaust port.

more

Listing

Geldern

(dealership location)

7,046 km

3D-CNC ROUTER MILLING MACHINE FRESATRICE

CNC-STEP High-Z S-1400/T

€5,509

Fixed price plus VAT

Call

Condition: new, Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you’re able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter. This 3D-cnc-milling machine series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3D outlines. With the S-1400 cnc-routers you are able to mill in almost all materials. Additional linear rail ways from HIWIN at X-axis are making the machine extreme stable. With the two trapezium nuts at X and y axis you are able to adjust backlash too. Zjhr9kno High quality components and a optional underframe leave none wishes open. So you are able to do that too: Milling in a big metall sheet cabinet. Work further like a professional and arrange a demonstration today in our house. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller. Basic equipment of all High-Z CNC-milling machines: Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !! To use the software CAD CAM ConstruCAM in full screen, you need the milling software version WIN PCNC Economy upward Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !! ----- Equipment / Productdetails: •Drive : 4 stepping motor by Nanotec with 1600 steps/rev (1/8 Step) •2 motors for constant tension and compression during milling operation on X-Axis •Guide ways X 22mm and Y axle 30 mm / Z Axis 16mm, grinded and with 61hrc hardened surface •Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle •Additional linear guide rails 15mm from HIWIN for the X Axis •Ball bearings at both sides of ball screws on X and Y axis •Traverse speed of rapid feed: max. 7000 mm/min •Technical resolution : 0,0079375 mm ( 1/8 Schritt ) •Reversal error max.: +/- 10µm ( 0,01mm ) •Table size / clamping area: 1730 x 880 mm •Traverse Paths: X=1400 mm; Y=780 mm; Z= 110 mm •Reference- and limit switch on all axes •Double safety emergency stop button •Energy chain for clean cabling •Total dinemsions incl motors: L x W x H = appr. 1750 x 1040 x 500mm •Milling Motor anchorage: Euroneck Ø43mm •incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional) •incl. Software ConstruCAM-3D limited ( recommended sell price full version 1902.81 EUR) •Modular frame for universal application ( shown underframe optional, 980 Euro incl VAT ) •Weight app

more

Listing

CNC-STEP CNC Fräsmaschine T-Rex Servo-1325

Geldern

(dealership location)

7,046 km

WOOD CNC ROUTER 3D MILLING MACHINE

CNC-STEP CNC Fräsmaschine T-Rex Servo-1325

€25,620

Fixed price plus VAT

Call

Condition: new, The servo CNC milling machine T-Rex Servo-1325 with helical racks and HWIN / THK / PMI linear slide has a solid steel frame. The portal milling machine enjoys great popularity with its robust construction, high stability and extensive basic equipment. Machine including CNC control, CADCAM software, control software, control panel, manual central lubrication, multi-zone vacuum table. traverse area 2500x1300x200 mm clamping area 2530x1320 mm passage height Z max. 220 mm (optional 320/420 mm) Machine dimensions 3270x2150x2100 mm Datdyqaqc machine weight 1600 kg max. rapid traverse diagonal 50.000 mm per min. max. working speed diagonal 35.000 mm per min. drive: Yaskawa 750 Watt servo motors ( optional available with 850 Watt) A 200 mm clearance height between the vacuum table and the Z-axis also makes it easy to process higher panel materials, as they fit under the bridge without difficulty. Solid components and the high quality of workmanship of the mechanical components allow the production of workpieces from various materials! With the built-in helical racks, the T-Rex servo-mills achieve fantastic accuracy and immense speed, and are also very flexible when it comes to special sizes, and can also be made to customer specifications. CE-compliant commissioning of our CNC milling machines requires the installation of a protective enclosure and exhaust port.

more

Listing

Ennepetal

6,975 km

Universal Milling Machine

MAHO MH 700 C (CNC)

Call

Condition: used, Year of construction: 1989, x-travel 0700 mm y-travel 450 mm Calg20cz8p z-travel 500 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 8 kW milling head -swivable +/- 90 ° total power requirement 23 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with 432 Control and universal table.

more

Listing

Lüdenscheid

6,953 km

milling machine CNC

MACMON M 434 NC/CNC

€23,900

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 1999, - control: Heidenhain TNC 310 - table size: 320 x 250 mm - travel range: X= 400, Y= 250, Z= 400 mm Bjjumyoc - tool holder: ISO 40 dimensions LxWxH: 1600 x 1500 x 1900 mm weight: ca. 1200 kg

more

Listing

Brașov

5,573 km

CNC Travelling column milling machine

ANAYAK HVM 5000

Call

Condition: used, Year of construction: 2005, CNC Travelling column milling machine - ANAYAK HVM 5000. Travels on axes X - Y - Z: 4300x1200x1500mm; Table size: 5000mm x 1200mm; Table load: 6,000 kgs; Spindle Motor: 30kW; ISO50 Spindle Taper. Bhm9gqh9 The machine is ready for delivery.

more

Listing

Hürriyet, Gündoğdu Cd. No:1, 34766 Kâğıthane/İstanbul, Türkiye

5,196 km

cnc turning and milling center

Mazak INTEGREX i-300

€2,95,000

Fixed price plus VAT

Call

turning length: 1,011 mm, turning diameter over cross slide: 658 mm, main spindle motor power: 30 W, motor power: 22 W, spindle bore: 80 mm, travel distance X-axis: 615 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 1,585 mm, Condition: like new (used), Year of construction: 2015, Operating hours: 9,577 h, System SmoothG Chuck Size 10" Stroke 615mm/260mm/1585mm B Stroke -30 + 210 Swing 658 mm Cutting Lenght 1011 mm Spindle Speed 4000 Rpm Spindle Motor 30/22Kw M/S Speed 12.000 Rpm M/S Motor 15/22 Kw TailStock MK5 TailStock Stroke 1526 mm Yhh2ugue Steady Rest Chip Conveyor Machine Weight 15,5 Ton

more

Listing

Wien

6,310 km

Table Type Boring and Milling Machine

TOS WHN 13 CNC

Call

Condition: used, Year of construction: 1991, spindle diameter 130 mm x-travel 3500 mm y-travel 2000 mm z-axis 1250 mm w-axis 800 mm b-axis 360 ° output 85 KVA table-size 1800x1800 mm table load 12 t table rotation 360x0,0001 ° spindle taper ISO 50 Binyuicm097 spindle motor 37 kW spindle turning speed range 1500 U/min feed range 4-8000 mm/min electrics - voltage/frequency 400 / 50 V/Hz weight of the machine ca. 35 t dimensions of the machine ca. 7x7x6 m

more

Listing

Halberstadt

6,724 km

CNC turning and milling center - 5 Axis

SCHIESS VMG4 MA90

Call

Condition: used, Year of construction: 2009, Ref. -No.: 10026 Manufacturer: SCHIESS Type: VMG4 MA90 Year of construction: 2009 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Turning Diameter: 5000 mm Turning Diameter Over Bed: 4000 mm Birc2vrb23s Clamping Diameter: 4000 mm Cross Travel: 420 x 340 mm Spindle Speeds: 0 - 120 RPM Max workpiece height: 3000 mm Main Drive: 52 kW Max. Tension: 120000 N Max. Payload: 50 t Power Capacity - Table: 110 kW Max torque faceplate: 100 kNm Further information: Automatic tool changer with 80 positions (AAC) Automatic attachment changer for 6 milling heads Live spindle C-axis table Travel of the Y-axis gantry columns Drilling and milling head (master head principle) Straight drilling and milling head GB-1B Renishaw RBP 60 touch probe Hand terminal Teleservice Internal and external coolant Operator cabin Chip conveyor SADDLE (X-AXIS): Horizontal movement from the center to the right side 4,800 mm Horizontal movement from the center to the left side 3,100 mm Vertical distance between the saddle rails 1,400 mm Speed / range 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Gantry stroke 5,000 mm Feed 0 - 16,000 mm / min RAM (Z-AXIS): Maximum cutting force when turning 60 Kn Enter minimum bore 550 mm Guide length 1,600 mm Speed / feed range 0 - 16,000 mm/min Spindle speeds: Range 1 0 - 180 - 520 rpm Range 2 0 - 1,100 - 3,150 rpm Spindle torque: Range 1 2,400 - 2,400 - 850 Nm Range 2 450 - 450 - 160 kNm

more

Listing

Niederhelfenschwil

(dealership location)

6,841 km

Multi Spindle Turning Machine (CNC)

HK-CON L32SDZ-12

Call

Condition: used, Year of construction: 2018, CONTROLS .. CNC controls SIEMENS 840 D SL BASIC FUNCTIONS .. design principle: front bed .. number of spindles: 6 .. number of x/z slides: 3 .. spdl. indexing device: yes .. live positions: yes .. number of c-axes: 6 WORKING RANGE TURNING .. turning diameter (max): 125 mm ELECTRICAL SPECIFICATIONS .. total power consumption: 100 kW DIMENSIONS / WEIGHTS .. total weight approx.: 23000 kg 6-spindle transfer lathe as double spindle machine for chuck turned parts Spindle power 14.6 kW per spindle. with 3 operations and 2 direct transfers. With 2 turning spindles arranged one above the other per operation, 2 workpieces are machined simultaneously. B3akwwhrol The transfer of the parts between the 3 tool blocks is fully automated and by direct transfers without releasing the workpiece. Thus, a total of 6 spindles are always engaged at the same time. The scope includes: - Robot KUKA KR6 R900 sixx - blowing station - Measuring station - Marking laser Trumpf TruMark 5000 - infeed and outfeed belts

more

Listing

Staufenberg

6,878 km

CNC Turning- and Milling Center

PFIFFNER-MANURHIN KMX-XL32

Call

Condition: used, Year of construction: 2001, machine/vehicle number: 2503, turning diameter:33 mm turning length:330 mm control: 840 total power requirement:20 kW weight of the machine ca.:6 t dimensions of the machine ca.:3850,2000,2100 m Cjdgjyl07l

more

Listing

Bacău

5,494 km

cnc turning and milling center

Hitachi Seiki Super Hicell CH 250

Call

turning length: 2,000 mm, turning diameter: 500 mm, CNC controller: Fanuc SEICOS 16T, Condition: excellent (used), Year of construction: 2001, machine/vehicle number: CH20186, CNC Horizontal lathe with milling capability HITACHI SEIKI Super Hicell CH 250 K7cf90djo9 Turning Diameter - 500mm Turning Lenght - 2000mm CNC Control - SECOS 16T The machine is available for Loading and transport and can be inspected in Bacau, Romania, anytime with prior appointment.

more

Listing

Mazzano

6,751 km

Cnc lathe - Cnc turning machine

voest alpine WNC 300S

Call

Condition: good (used), Lathe Machine Details NAME Bioht9ibpy3 CNC LATHE MACHINE ITEM NO. 1122 MANUFACTURER VOEST ALPINE MODEL / TYPE WNC 300s YEAR OF MANUFACTURE 1991 CONTROL FANUC OT SPINDLE BORE 65 MM CHUCK DIAMETER 250 MM TURNING DIAMETER 470 MM TURNING Ø OVER SADDLE 345 MM TURNING LENGTH 1120 MM TURNING SPEED 5,000 RPM TOOLCHANGER POSITIONS 12 WEIGHT APPROX. 5,500 kg this machine also has live tools.

more

Listing

Hessisch Lichtenau

6,811 km

CNC drilling machine and milling machine drilling machine

ALZMETALL Abomat 35 CNC

€3,000

Fixed price plus VAT

Call

Condition: used, Year of construction: 1985, CNC drilling and milling machine ALZMETALL type Abomat 35 CNC drilling machine with control Heidenhain TNC 135 make no. 136 year of construction 1983 drilling capacity in steel Ø 40 mm drilling capacity in cast iron GG 20 Ø 50 mm Bc9u9us2oe threading in steel M 36 threading in cast iron GG 20 M 46 spindle mounting ISO 40 travel X: 500 mm, Y: 400 mm, Z: 850 mm distance table - spindle nose max. 1000 mm throat 420 mm table size 620 x 400 mm Spindle speed 5-1800 rpm. 37 steps spindle drive 20 KW Baumüller Torque at spindle max. 400 Nm Mains connection 380 Volt, 50 Hz, 26 kW - CNC linear control Heidenhain TNC 135 - spindle drive via servo motor BAUMÜLLER with electrical speed preselection - swivelling control panel - interface V 24 - hydro-mechanical tool clamp - 15-fold tool changer (not in function) (was last operated with hand tool change only) - Splash guard cabin with front door (not mounted on the pictures, but available) space requirement L x W x H 3000 x 1900 x 2950 mm Weight approx. 4 ton.

more

Listing

Halberstadt

6,724 km

CNC - milling-turning center - 5 axes

STAMA MT 733 two plus

Call

Condition: used, Year of construction: 2021, Ref. -No.: 10372 Manufacturer: STAMA Type: MT 733 two plus Year of construction: 2021 Type of control: CNC Control: SINUMERIK Siemens 840 D sl Storage location: Halberstadt Country of origin: Switzerland Turning Speeds: 4200 RPM Tool Taper: HSK T-63 Spindle Speeds: 12500 RPM Workpiece Length: 300 mm X-axis travel: 615 mm Y-axis travel: 290 mm Z-axis travel: 500 mm Max. Tool Weight: 10 kg Max. Tool Diameter: 78 mm Max. Tool diameter with 2 free spaces: 140 mm Spindle bearing diameter: 80 mm Number of tools in the chain magazine: 64 Max. Rapid traverse: 65 m / min Max. Feed force: 4000 N Max. Feed force: 8000 kN Acceleration (X): 7 m/s² Acceleration (Y): 9 m/s² Acceleration (Z): 13 m/s² Xsyhhqui Further information: - Ball screw - Automation - Workpiece loading/unloading chuck parts with X- / Z- gantry loader - Clamping pressure preselection 15 - 50 bar for both spindles - Buffer station for constant short chip-to-chip times - NCU High Performance NCU 730.3.m - Magnetic gripper

more

Listing

Dieburg

6,868 km

CNC milling machine

Enshu VMC 40

€5,000

Fixed price plus VAT

Call

Condition: excellent (used), CNC milling machine ENSCHU VMC 40 X,Y, Z : 560x 350x 410 mm Speed range : 100 to 6000 rpm D3a2av0rx SK 40

more

Listing

Bursa

5,183 km

Cnc Turning and Milling Center

EMCO HYPERTURN 690 MC PLUS

Call

travel distance X-axis: 490 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 1,110 mm, Condition: excellent (used), Year of construction: 2005, machine/vehicle number: N69T050275, HT 690 MC PowerMill Multi-axis CNC turning / milling center with automatic tool change, Y-axis and B-axis for complete machining of turned and milled parts; Max. Diameter approx. Over bed 700 mm Max. Turning diameter approx. 520 mm Distance between the spindles approx. 1500 mm Travels X-axis 490 mm Z-axis 1110 mm Y-axis 200 mm Drive power: Bhz7ypgaxhc Main spindle 54 kW (S6) Counter spindle 25 kW (S6) Speed range: Main spindle 0 - 3200 min-1 Counter spindle 0 - 3200 min-1 Main spindle: A2-8 (ASA 8 ") DIN 55026, Counter spindle: A2-8 (ASA 8 ") DIN 55026, Y-axis: travel range +/- 100mm PowerMill: A motorized milling spindle with 48-fold tool magazine is integrated into the upper slide system for machining inclined surfaces and bores. The swivel range of 210 ° can be steplessly traversed and interpolated. Preloaded roller guides in all linear axes; digital drive system, integrated spindle encoder; State-of-the-art control technology SINUMERIK 840D Contains: • Main spindle with clamping cylinder • Counter spindle (with clamping cylinder) • Milling spindle with Y and B axes • C-axis for main spindle and counter spindle • TRANSMIT software for simple C-axis programming • Kelvin cooling unit for headstocks, storage of main and counter spindle and milling spindle • Sinumerik 840D, electronic handwheel, RS 232 interface • Chip conveyor with an ejection height of 1100mm programmable (type hinge belt) • Coolant device integrated in the chip conveyor, HP pump with 14 bar • Feed rinsing device for both spindles • Control cabinet air conditioner • Programmable clamping pressure on main and counter spindle • Line filter • Hydraulic power pa

Sell cnc turning and milling machine now

from €2.99*

Inform now
+44 20 806 810 84

Used Cnc turning and milling machine for sale (90,263)

Giddings and Lewis MC50 Twin Pallet HBM

HAAS SL30-THF

DOOSAN MX2100ST

Advertise now from €2.99*
10 million buyers are waiting for you

Mazak Integrex 30

GILDEMEISTER Twin 42-II

CNC Bridge Milling Machine Nicolas Correa FPM-60

RicoCNC edgebander PCD pre milling cutter heads

PARPAS CNC BRAVE 6000 x 1200 x 2100

CNC-Drehmaschine Gildemeister NEFCT40

CNC Fräsmaschine VMC 650

Brown and Sharpe No 2

Noble and Lund model P/RLMA

XYZ Machine Tools SMX 3500

CNC-STEP CNC Portalfräse T-Rex N-0609

CNC-STEP High-Z S-400/T

CNC-STEP High-Z S-1000/T

CNC-STEP High-Z S-720

CNC-STEP CNC Fräsmaschine T-Rex Servo-0609

CNC-STEP High-Z S-1400/T

CNC-STEP CNC Fräsmaschine T-Rex Servo-1325

MAHO MH 700 C (CNC)

MACMON M 434 NC/CNC

ANAYAK HVM 5000

Mazak INTEGREX i-300

Trust Seal

TOS WHN 13 CNC

SCHIESS VMG4 MA90

HK-CON L32SDZ-12

PFIFFNER-MANURHIN KMX-XL32

Hitachi Seiki Super Hicell CH 250

voest alpine WNC 300S

ALZMETALL Abomat 35 CNC

STAMA MT 733 two plus

Enshu VMC 40

EMCO HYPERTURN 690 MC PLUS

Filter results

Sell cnc turning and milling machine now

from €2.99*

Inform now +44 20 806 810 84

Used Cnc turning and milling machine for sale (90,263)

Sort results

Giddings and Lewis MC50 Twin Pallet HBM

HAAS SL30-THF

DOOSAN MX2100ST

Advertise now from €2.99* 10 million buyers are waiting for you

Mazak Integrex 30

GILDEMEISTER Twin 42-II

CNC Bridge Milling Machine Nicolas Correa FPM-60

RicoCNC edgebander PCD pre milling cutter heads

PARPAS CNC BRAVE 6000 x 1200 x 2100

CNC-Drehmaschine Gildemeister NEFCT40

CNC Fräsmaschine VMC 650

Brown and Sharpe No 2

Noble and Lund model P/RLMA

XYZ Machine Tools SMX 3500

CNC-STEP CNC Portalfräse T-Rex N-0609

CNC-STEP High-Z S-400/T

CNC-STEP High-Z S-1000/T

CNC-STEP High-Z S-720

CNC-STEP CNC Fräsmaschine T-Rex Servo-0609

CNC-STEP High-Z S-1400/T

CNC-STEP CNC Fräsmaschine T-Rex Servo-1325

MAHO MH 700 C (CNC)

MACMON M 434 NC/CNC

ANAYAK HVM 5000

Mazak INTEGREX i-300

Trust Seal

TOS WHN 13 CNC

SCHIESS VMG4 MA90

HK-CON L32SDZ-12

PFIFFNER-MANURHIN KMX-XL32

Hitachi Seiki Super Hicell CH 250

voest alpine WNC 300S

ALZMETALL Abomat 35 CNC

STAMA MT 733 two plus

Enshu VMC 40

EMCO HYPERTURN 690 MC PLUS

Inform now
+44 20 806 810 84

Advertise now from €2.99*
10 million buyers are waiting for you