Used Cnc horizontal borer for sale (11,576)

Listing

Request more images Request more images Already requested

13

Komárno

6,173 km

Borer horizontal - floor type

Fermat WRF 130 CNC

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2008, Heidenhain TCN 530 control system X axis - 8000 mm Y axis - 3000 mm Z axis - 900 mm W axis - 730 mm CNC rotary table T25 - 2000x3000 mm, V=2400 mm Tool cooling also through the spindle, chip conveyor Rkdnv The machine is under power, possibility of testing. Regularly serviced.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

13

Babberich

7,060 km

CNC Horizontal borer X 10000 and Y 3500

Wotan Rapid 6

Price info Price info Already requested Call

Condition: good (used), Year of construction: 1999, Make: Wotan Type: Rapid 6 Control: Bosch CC 200 Year: 2003 Aerostic in X Direction Hydrostatic Z Direction ( RAM) Hydrostic W Direction ( Spindel) Retrofitted in 1999 Optional DV45 Rotary table Optional Floorplates (3 units) 6750 x 5250 mm Optional Angle plates (2 units) 2700 x 1500 x 5000 mm Specifications Metric US Standard X - Travel 10000 mm Y - Travel 3500 mm Z - Travel 1000 mm W - Travel 900 mm Table Length 3000 mm Table Width 3000 mm Table load 25000 Speeds / ranges 800/2500 Rpm Power 63 kW Ram size 420 x 420 mm Spindle Taper 50 ISO/Bt/Mk Feed rate X-Axis 1000 mm/min. Crisehifzw Feed rate Y-Axis 8000 mm/min. Feed rate Z-Axis 4500 mm/min. Feed rate W-Axis 4500 mm/min. Number of controlled axis 6 ( X, Y, Z, W, B, V-Axis) Dimensions (Estimate) Length 15000 mm Width 6000 mm Height 7000 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Bocholt

7,028 km

Bandsaw - Horizontal

BEHRINGER HBP 430 A/CNC

Price info Price info Already requested Call

Condition: used, Year of construction: 1998, cutting diameter 430 mm saw band length 5800x54x1,3 mm cutting width 430 mm Control Behringer sawing motor 7,5 kW cutting speed 17-110 m/min min. cut-off length 8 mm length of rest piece autom. 130 mm length of rest piece man. 40 mm weight of the machine ca. 3,4 t dimensions of the machine ca. 3x2,2x2,1 m K2ytczlg

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Deutschland

6,760 km

Band Saw - Automatic - Horizontal

BERG & SCHMID SBS 300 VA-I / CNC

Price info Price info Already requested Call

Condition: new, 300 mm Cketktfre 300 mm 300 x 260 mm saw band length 3920 x 34 x 1,1 mm table height 780 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 1,65 t dimensions 2,0 x 2,05 x 1,7 m

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Deutschland

6,760 km

Band Saw - Automatic - Horizontal

BERG & SCHMID SBS 330 VA-I / CNC

Price info Price info Already requested Call

Condition: new, 330 mm 330 mm 400x330 mm saw band length 4570 x 34 x 1,1 mm table height 800 mm band speed 20 - 100 m/min Bgwjqqzlff total power requirement 3,7 kW weight of the machine ca. 2,35 t dimensions 2,23 x 2,15 x 1,8 m

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Deutschland

6,760 km

Band Saw - Automatic - Horizontal

BERG & SCHMID SBS 460 VA-I / CNC

Price info Price info Already requested Call

Condition: new, 460 mm 460 mm 460 x 460 mm saw band length 5450 x 41 x 1,3 mm table height 800 mm Bh2y28wmnr band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,2 t dimensions 2,675x 2,15 x 2,05 m

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Deutschland

6,760 km

Band Saw - Automatic - Horizontal

BERG & SCHMID SBS 550 VA-I / CNC

Price info Price info Already requested Call

Condition: new, 550 mm 550 mm 550 x 550 mm saw band length 5980 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,8 t dimensions 3,0 x 2,15 x 2,2 m Bh2y3ihsbs

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

104. SK. No:9 D:Sitesi A Blok, 34776 Dudullu Osb/Ümraniye/İstanbul, Türkiye

5,188 km

CNC HORIZONTAL MACHINING CENTER

DMG MORI DMC 55 H

Price info Price info Already requested Call

Condition: used, Year of construction: 2006, STOCK NUMBER Z100000471 CONTROL PANEL SIEMENS 840-D SOLUTIONLINE AXIS MOVEMENT X 560 MM / Y 600 MM / Z 600 MM ROTARY AXIS MOVEMENTS B 360 ° / 1 ° Bfhup08n2 SPINDLE SPEED 18.000 MIN/-1 TOOL HOLDERS SK 40 NUMBER OF TOOL POSITION 60 TABLE SURFACE AREA 400 X 400 MM NUMBER OF PALLETS 2 MAX. TABLE LOAD 500 KG DIMENSIONS OF THE MACHINE 4.10 X 2.10 X 2.35 M

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Králova 279/9, 616 00 Brno-Žabovřesky, Tschechien

6,306 km

Horizontal boring machine

TOS WHN 13A CNC

Price info Price info Already requested Call

Condition: good (used), Control system: MEFI CNC 859 Length of work table: 1600 mm Work table width: 1800 mm Maximum spindle speed: 2800 1/min X: 2000 mm Ciisqig7pg Y: 1600 mm Z: 1200 mm Spindle power: 38 kW Machine weight: 34,600 kg

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

14

Halberstadt

6,724 km

CNC Machining Center - Horizontal

HÜLLER HILLE NBH 170

Price info Price info Already requested Call

Condition: used, Year of construction: 2008, Ref. -No.: 10335 Manufacturer: HÜLLER HILLE Type: NBH 170 Year of construction: 2008 Type of control: CNC Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Dm7icz Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: 0 - 12000 RPM Rapid Traverse: 60 m / min Further information: Coolant system = 1250 l

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Bochum

6,984 km

CNC HORIZONTAL BAZ

Kitamura Mycenter HX300F

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2004, See documents. Dm7ent

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

2

Wiener Neudorf

(dealership location)

6,311 km

Band Saw - Automatic - Horizontal

BIANCO 330 AE CNC

€18,970

EXW ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Year of construction: 2023, neu 2023 6240 prompt, Zwischenverkauf v Italien 18970 € 388.89 € 1 Schwenkrahmen 3010x27x0,9 mm 20-100 m/min 260 mm 240 mm 330x120 mm rund 200 mm, quadrat 190 rund 120 mm, quadrat 115 220 mm 835 mm 1.5 kW 2800 mm Piykl 2050 mm 1900 mm 1090 kg material feed andnumber of pieces by CNC (99 programms) automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed 600 mm/stroke variable cutting pressure variable cutting speed coolant equipment automatic saw blade breakage detection hydraulic vices for material clamping while cutting and for feeder unit user manual in GERMAN or ENGLISH

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

8

Zevenbergen

7,166 km

CNC Horizontal/Vertical Machining Center

Kao Ming KMC 700 HV

Price info Price info Already requested Call

feed length X-axis: 1,050 mm, feed length Y-axis: 800 mm, feed length Z-axis: 900 mm, input power: 15 kW (20.39 PS), table width: 700 mm, table length: 700 mm, Condition: used, Year of construction: 1995, Control Fanuc 15-M Table size 700 x 700 mm Table load 1300 kg Number of pallets 2 Max workpiece diam x height Ø 950 x 850 mm Movement X-Y-Z-axis 1050 x 800 x 900 mm C-axis (table rotation) 0,001 ° Spindle speed 20-5000 1/min Spindle taper MAS BT 50 Spindle motor 15 / 11 kW Magazin capacity 60 Dm20zn If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Tuřanka 1319/104, 627 00 Slatina, Czechia

6,299 km

Table Type Horizontal Boring Mill

Fermat WPT 130 L CNC

Price info Price info Already requested Call

travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, spindle diameter: 130 mm, spindle speed (max.): 3,400 rpm, motor power: 41,000 W, table length: 2,600 mm, table width: 1,800 mm, travel distance W-axis: 800 mm, CNC controller: Heidenhain, coolant supply through spindle: 20 bar, Condition: new, Year of construction: 2023, New machine ready for pre-acceptance from the week 2 / 2024 Control system: Heidenhain Spindle Diameter: ø 130 mm Table Travel (X Axis): 4 000 mm Headstock Travel (Y Axis): 2 500 mm Column Travel (Z Axis): 1 500 mm Spindle Travel (W Axis): 800 mm Spindle Taper: SK 50 Maximum Spindle Speed: 3 400 rpm Max. Spindle Power: 41 kW Rotary Table Clamping Plate Size: 1 800 x 2 600 mm Bii7nnj2kfk CTS: 20 bars

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

14

Poznań

6,331 km

Horizontal CNC Lathe

Mazak HTC 400

€12,900

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Year of construction: 1998, Mazak HTC 400 horizontal machining center Machine in very good condition Syb2es 2 pallets 400x400mm X / Y and Z axis movement 560/510/510 mm year 1998 ready for shipping full documentation

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

5

Halberstadt

6,724 km

CNC - boring mill - horizontal - 3 Axis

UNION BFT 110/6

Price info Price info Already requested Call

Condition: used, Year of construction: 2001, Ref. -No.: 10022 Bil7dtlbgi0 Manufacturer: UNION Type: BFT 110/6 Year of construction: 2001 Type of control: CNC Control: Heidenhain-Steuerung TNC 310 Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 2000 mm Machine length: 6950 mm Machine width: 4685 mm Machine Height: 3885 mm Table Height: 1050 mm Spindle Diameter: 110 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1400 x 1600 mm Faceplate speed: 5,6 - 224 RPM Spindle Speed: 5,6 - 1120 RPM Metric thread feeds: 1,25 - 56 mm Drive Capacity - Spindle Motor: 40 kW Weight Of The Machine Ca.: 25 t Bore Depth: W 800 mm Further information: with facing slide 13 inch thread feeds 1 1/8 - 28 Gg / 1 “ YOM: 1990/ Retrofit: 2001

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

14

Celle

6,795 km

4-Axis CNC Horizontal Machining Centre

Makino MCB 1210/A120

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 1998, 4-Axis CNC Horizontal Machining Centre Makino MCB 1210–A120 Year 1998 Fanuc 16MC + Professional 3 Two pallets Pallet size 800 x 800 mm X 1250 mm Y 1050 mm Z 810 mm Spindle taper ISO 50 Spindle drive motor 26 KW AC Spindle speeds 10 – 4500 rpm Number of gear steps 4 automatic steps Spindle torque max. 1066 Nm Tool taper ISO 50 Tool changer Igcwoin8 Tool magazine positions 120 station Equipped with: B-Axis circular inductosyn measurement system Direct tapping to 2000 rpm (rigid tapping) Chip conveyor High pressure coolant through the spindle 30 bar Coolant filtration unit to 40 µm Tool monitoring system Tool life control Tool measurement Tool breakage control Renishaw probing system with probe Excellent condition – Inspect under power Top quality machine. High accuracy. Very interesting price. Proposal Number MH-6335

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Asenovgrad

5,561 km

CNC Machining Center Horizontal

Stenbergs BTF130 R22

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2003, machine/vehicle number: 912463, CNC Horizontal BTF130-R22 Stenbergs Taple:2500x2500 E9r9uozbj Diameter:130.mm Toshiba-Tosnuc Control Japan

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

8

București

5,507 km

Floor Borer AFL 150 CNC Titan

Titan boring&milling

Price info Price info Already requested Call

Condition: used, Year of construction: 1984, Used Horizontal borer TITAN AFL 150 CNC CNC Heidenhain Srcows - X column - 9000 mm; - Y vertical - 2000 mm; - W spindle - 900 mm - Z column cross - 600 mm - spindle speed 900 rpm - spindle dia. 150 mm - Machine weight aprox. 50 tons Floor plates 2 pcs. 2000x6000 Rotary table Skoda E20

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Tuřanka 1319/104, 627 00 Slatina, Czechia

6,299 km

Horizontal Boring Mill - Table Type

Fermat WFT 13 R CNC

Price info Price info Already requested Call

travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 130 mm, motor power: 41,000 W, table length: 2,400 mm, table width: 2,000 mm, travel distance W-axis: 800 mm, CNC controller: Heidenhain TNC 640, Condition: new, Year of construction: 2023, New machine ready for pre-acceptance from the week 13 / 2024 Control: Heidenhain TNC 640 Spindle diameter: 130 mm X-axis: 5000 mm Y-axis: 3000 mm Z-axis: 2000 mm W-axis: 800 mm V-axis: 700 mm Spindle taper: SK 50 Main motor power: 41 kW (S1) Bh9gztcqh8c Table dimensions: 2000 x 2400 mm ATC 60 H/V Internal cooling: 70 bars

Price info Price info Already requested more

Listing

Monheim am Rhein

7,007 km

CNC Horizontal Surface Grinding Machine

ROSA LINEA STEEL 13.7

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2000, CNC surface grinding machine in very good condition The machine can be demonstrated under power grinding length 1500 mm grinding width 750 mm workpiece height 600 mm Table dimensions 1400 x 500 mm table load 1700 kg dimensions of grinding wheel 400 x 30 x 100 mm grinding wheel speed 1450 rpm. main drive 11 kW table speeds 1 - 40 m/min cross feeds: 0 - 4 m/min Jn93ozwcbh weight of the machine approx. 9,4 t dimensions of the machine approx. 6,4 x 3,1 x 2,65 m Equipment: - CNC control E.C.S. CNC 2401 System III - Magnetic plate 1400 x 500 mm - Coolant device with paper band filter Accesories: Machine shoes / fixators Machine documentation Various new spare parts, including coolant pump, grinding wheel with flange, guideway covers, electronics assembly, etc.

Price info Price info Already requested more

Listing

Halberstadt

6,724 km

CNC - Machining Center - Horizontal

STARRAG HECKERT CWK 630

Price info Price info Already requested Call

Condition: used, Year of construction: 2015, Ref. -No.: 10342 Manufacturer: STARRAG HECKERT Type: CWK 630 Year of construction: 2015 Type of control: CNC Control: Fanuc Series 16i Storage location: Halberstadt Country of origin: Schweiz Serial no.: 12217 X-Travel: 1000 mm Y-Travel: 910 mm Z-Travel: 835 mm Distance spindle center - table: 100 mm Table Dimensions (Lengthxwidth): 630 x 800 mm Table Load: 1250 kg Max. Tool Length: 600 mm Max. Tool Diameter: 500 mm Tool Taper: HSK-A 100 L8npos9ps9 Numbers Of Tools In Magazin: 240 Spindle Speed: 20 - 6000 RPM Feed Capacities X/Y/Z: 20.000 N Rapid Traverse: 40 m / min Internal cooling: 30/40/50 bar External cooling: 2 bar

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Celle

6,795 km

CNC 5-Axis Horizontal Machining Centre

Heller MCH 450 C

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2007, 5-Axis Horizontal Machining Centre for complex heavy-duty machining Heller MCH 450 C Year 2007 Siemens Sinumerik 840C Number of pallets: 2 : Twin pallet changer Pallet size: 800 x 1000 mm Pallet load: max. 2500 kg Pallet changing time: 27 sec. NC Rotary table 4th axis : B 360000 x 0.001° NC Tilting milling head 5th axis: C 360000 x 0.001° Traverses: X 1600 mm Y 1200 mm Z 1700 mm Feeds: X/Y/Z 1-40000 mm/min. Rapids: X/Y/Z 40000 mm/min. Spindle taper: ISO 50 DIN 69871 Spindle front bearing ID: 100 mm Spindle drive motor: 28 / 43 (100% / 40% ) KW Spindle speeds: 45 ~ 6.000 rpm Spindle torque: max. 536 / 822 (100% / 40%) Nm Tool taper: ISO 50 DIN 69871 Tool magazine positions: 100 Tool diameter with/without adjacent tools: max. 112 / 228 mm Tool length: max. 600 from spindle nose mm Tool weight: max. 25 kg Chip-to-chip time (H) : approx. 8.2~12.2 sec. Machine weight: approx. t.b.a. kg 9vizyfgfow Machine dimensions: L x W x H t.b.a. mm x mm x mm Equipped with: 5-Axis simultaneous machining 4th axis NC Rotary table 5th Axis NC swivelling milling head Twin pallet changer 100-station tool magazine Linear measurement scales X,Y,Z axes Tool measurement and tool breakage control Coolant through spindle 50 bar Chip conveyor Proposal Number MH-6298

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Bongamgongdan 13-gil, Bongam-dong, Masanhoewon-gu, Gyeongsangnam-do, South Korea

5,090 km

CNC Horizontal Heavy duty Lathe

KARATSU L-32N

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2018, Swing over Bed, 2,800mm Bf8kzntfh2e Distance between centers. 15,000mm Max. Loading capacity of the workpiece between centers. 200tons Diameter of faceplate. 2,000mm Range of spindle speed. 1~100rpm Requested space of the machine for installation, 8,000 x 29,000mm Control, Fanuc 18I-TB Steady rests are available the machine is assembling like the picture

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Kirchheim bei München

6,649 km

horizontal flat grinding machine

Minini PL8.32 CNC

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2007, Kuehlmittelanlage 2.500l, Haftkraftregelung, halbautom. Wuchtsystem Yrfwbw Schleiflaenge 3150 mm Schleifbreite 800 mm Werkstueckhoehe 650 mm Tischflaeche 3.150 x 600 mm Magnetspannplatte 3.000 x 600 mm Spindeldrehanzahl 1/min Schleifscheibenabmessung 450 x 100 x 127 mm Spindelleistung kW Gesamtleistungsbedarf 22 kW Maschinengewicht ca. t Raumbedarf ca. 11 x 3 x 2,4 m

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Tuřanka 1319/104, 627 00 Slatina, Czechia

6,299 km

Table Type Horizontal Boring Mill

Fermat WPT 130 L CNC

€4,99,000

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, table load: 20,000 kg, spindle diameter: 130 mm, spindle speed (max.): 3,400 rpm, motor power: 37,000 W, table length: 2,600 mm, table width: 1,800 mm, CNC controller: Fanuc, Condition: new, Year of construction: 2023, New machine ready for pre-acceptance Control system: Fanuc Spindle Diameter: ø 130 mm Table Travel (X Axis): 4 000 mm Headstock Travel (Y Axis): 2 500 mm Column Travel (Z Axis): 1 500 mm Spindle Travel (W Axis): 800 mm Spindle Taper: SK 50 Maximum Spindle Speed: 3 400 rpm Max. Spindle Power: 37 kW Rotary Table Clamping Plate Size: 1 800 x 2 600 mm Max. Workpiece Weight: 20 ton ATC 40 H Cuwucpirr CTS: 70 bars The price includes installation.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

7

Deutschland

6,760 km

CNC horizontal milling center

DMG MORI NHX4000 2nd

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2017, Equipment Standard Spindle 15,000 min-1, 30.7/ 26/ 18.5 kW - APC 2-fold - 4th axis - Tool storage 60 pockets - Tool holder BT40 - Tool length measuring function at table (Metrol) - Preparation IKZ (center through, 7.0 MPa) - coolant gun - Chip conveyor Bh9ms0ykteh - Electronic handwheel - Signal light 4-fold - Programming of islands and pockets - High speed cycles Travel range X-axis approx. 560mm Y-axis approx. 560mm Z-axis approx. 660mm table 360° 0,001 workpiece diameter approx. 630mm workpiece weight max. approx. 400kg speed max. approx. 15.000rpm spindle motor approx. 30,7/26/18,5KW number of tool places approx. 60 rapid traverse approx. 60m/min Pick-up cone BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min power consumption approx. 37,3kVA footprint L x W x H approx. 2,70x4,20x2,54m Machine weight approx. 8.500kg This offer is subject to change and non-binding. (Changes, errors and prior sale expressly reserved)

Price info Price info Already requested more

Listing

Halberstadt

6,724 km

CNC - Machining Center - Horizontal

STARRAG HECKERT HEC 630 Athletic

Price info Price info Already requested Call

Condition: used, Year of construction: 2007, Ref. -No.: 10357 Manufacturer: STARRAG HECKERT Bil7lexzstl Type: HEC 630 Athletic Year of construction: 2007 Type of control: CNC Steuerung Control: Sinumerik 840D Storage location: Halberstadt Country of origin: Schweiz X-Travel: 1200 mm Y-Travel: 950 mm Z-Travel: 1200 mm Work spindle drive power (25% ED): 67 kW Work spindle torque (25% ED): 1508 Nm Tool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mm Tool Piece Magazine With: 80 Pcs./pcs. Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mm Feed Speeds X/Y/Z Axis: 60000 mm / min Feed Capacities X/Y/Z: 22/18/22 N Speed range - main spindle: 20 - 6000 RPM Numbers Of Pallets: 2 Max pallet load: 1500 kg Size Of Pallet: 800 x 630 mm pallet change time: 14 s Pallet clamping area (lxw): 800 x 630 mm Weight Of The Machine Ca.: 25 t

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Celle

6,795 km

CNC 5-Axis Horizontal Machining Centre

Mandelli Spark 3500X

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2018, 5-Axis horizontal machining center with pallet changer Mandelli Spark 3500X New in 2018 Siemens Sinumerik 840D Number of pallets 2 Pallet size 1250 x 1600 mm Pallet load capacity max. 5100 kg 4th axis 0.001° NC rotary table 5th Axis NC-Tilting milling head A-Axis +80° ~ -120° X 3500mm Y 1850mm Z 1800 mm Feeds B8dj3dkqzu X,Y,Z up to 20000 mm/min. Rapids X,Y,Z up to 35000 mm/min. Tool taper HSK-A100 Spindle drive motor rating 46/67.7 kW Spindle speeds up to 6000 rpm. Spindle torque max. 1851 Nm 200 station tool magazine. Tool diameter max. 120 mm/425 mm Tool length max. 600 mm Tool weight max. 35 kg Coolant through the spindle 25/40/60 bar Proposal Number MH-6234

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Plovdiv

5,573 km

CNC HORIZONTAL MACHINING CENTER

Makino A99

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2000, X-Y-Z axis travel: 1000-1000-950 mm Control system: Fanuc Pro 3 Spindle taper: BT-50 Spindle rpm: 12.000 rpm Spindle diameter: 110 mm Rotary table spec. 2x Pallets size : 800x800 mm Cs3afopqe3 Magazine ATC frame structure : (A132) Machine is in our warehouse in Bulgaria,Plovdiv , welcome to visit.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

3

Korschenbroich

7,032 km

CNC Gear Hobbing Machine Horizontal

Pfauter P210L

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2004, CNC Gear Hobbing Machine Horizontal . no tailstock, just for chuck parts . max. gear diameter: 90 mm . max gear width (b): 50 mm Bz3ysegep8 . max module: 3

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

13

Mörsdorf

6,664 km

Horizontal CNC machining center

MATSUURA MC 600 H - 45 mit 2 Wechseltischen

Price info Price info Already requested Call

Condition: good (used), Year of construction: 1987, Horizontal CNC machining center make MATSUURA type MC 600 H - 45 Machine # 870706216 Year of construction 1987 Technical data: Table working area 450 x 450 mm table longitudinal travel X 600 mm vert. Headstock travel Y 450 mm column cross travel Z 480 mm table indexing increment 0,001 mm max. table load 500 kg number of tools in changer 50 distance table - spindle axis 85 - 525 mm table center - spindle 125 - 605 mm spindle diameter 80 mm spindle support BT 40 spindle speed 30 - 6000 rpm. rapid traverse XYZ 15000 / 15000 / 15000 mm/min. feed speed stepless 1 - 5000 mm/min. drive power AC 7,5 / 11 kW weight 8200 kg with - CNC control Fanuc 11 M - number of shuttle tables 2 - very many tool holders 9ymbvcamal - 14461 operating hours - chip conveyor used, in very good condition current special price - as on stock free loading truck

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

2

Eislingen/Fils

6,803 km

Surface Grinding Machine - Horizontal

ELB Super-Rubin 024 CNC Unicon

Price info Price info Already requested Call

Condition: used, Year of construction: 1980, machine/vehicle number: 19780, grinding length:600 mm grinding width:300 mm workpiece height:375 mm number of spindle speeds:1000 - 3000 UpM Y7lfchbsv grinding wheel dimensions::300 x 50 x 76,2 mm grinding spindle drive:2,8 - 8,4 kW weight of the machine ca.:3,5 t CNC-controlled, 3D-controlled profile-dressing unit, Unicom ELB-CNC control with integrated 024 CNC Unicon electric hand wheel, display screen, analogue spindle load display, stepless adjustable cross feed, coolant device with magnetic-roller chip collector, full housing, separate electrical cabinet, additional grinding wheel with flange

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

13

Pfullingen

6,838 km

Horizontal milling and drilling center

SW Schwäbische Werkzeugmaschinen GmbH BA 600 2-CNC, 2-spindlig

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal milling and boring center SW Swabian Machine Tools GmbH Travels: X-axis 600 mm Y-axis (change position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side mounted Feed/rapid traverse speed: X, Y, Z 1 - 45000 mm/min. Max. Feed force X, Y, Z, 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Direct displacement measuring system X, Y, Z Spindles: Spindle speed (infinitely variable) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK -A 100, arrangement horizontal side by side spindle distance 600 mm spindle bearing diameter 100 mm motor spindles liquid cooled in AC-technology working range: Bzy7ufiycw Swivel beam with face gear, max. transport load 2000 kg swiveling time 0/180 degree approx. 6,0 sec 2 NC rotary tables hydraulically clamped, max. transport load 700 kg, speed 25 rpm Partition wall between cutting and loading area tool magazine: 2 x 50 tools HSK-A 100 chain magazine tool change time (chip/chip) 4,48 sec. max. tool diameter 100 mm 250 mm with free secondary space max. tool length 420 mm max. tool weight 20 kg equipment: Central lubrication oil minimum lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Cooling lubricant cleaning with compact belt filter Hydraulic system Maintenance unit Water recooler Full enclosure, crane loading possible dimensions: approx. 5,15 x 8,50 x 4,20 m Weight: approx. 20,000 kg Year of construction 2007 Other: very good condition setup parallel to main time Available from December 2023/January 2024

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Leipzig

6,630 km

Surface Grinding Machine - Horizontal

KEHREN RW7D-CNC

Price info Price info Already requested Call

Condition: used, Year of construction: 1993, rotary table diameter: 2x700 mm grinding height: 200 mm grinding head - power requirement: 15 kW max. dia. of grinding wheel: 400 mm grinding spindle speed: 1400-2800 stufenlos /continous U/min automatic feeds: 0,001-0,02 weight of tools max.: 650 kg table speed: 5-10 m/min rotary table revolutions per minute : 5-10 stufenlos U/min rotary table: Querbewg. 0,2...10 m/min Byfmtdwt total power requirement: 49 kW weight of the machine ca.: ca. 12,0 t dimension machine xH: 6,0x3,0x2,8 m dimensions electric cabinet LxWxH: 2,0x0,55x2,2 m ROTARY TABLE SURFACE GRINDING MACHINE - 2 magnetic rotary tables each Ø=700mm - diamond roller dressing device - without coolant unit i.D.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Plovdiv

5,574 km

NH5000 CNC Horizontal Machining Center

Mori Seiki NH5000

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2005, B axis is with 0.001 indexing degree Bcvjhzxfm3y CTS system Fanuc based control system Please feel free to contact us for your further questions

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Korschenbroich

7,032 km

CNC Gear Hobbing Machine Horizontal

Pfauter P100

Price info Price info Already requested Call

Condition: refurbished (used), Year of construction: 1998, machine/vehicle number: 28128, CNC Gear Hobbing Machine Horizontal B9dknlam2n . no tailstock, just for chuck parts . max. gear diameter: 90 mm . max gear width (b): 50 mm . max module: 3

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

9

Tuřanka 1319/104, 627 00 Slatina, Czechia

6,299 km

Horizontal Boring Mill - Table Type

Fermat WFT 15 CNC

Price info Price info Already requested Call

travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, table load: 20,000 kg, spindle diameter: 150 mm, motor power: 37,000 W, table length: 2,200 mm, table width: 1,800 mm, travel distance W-axis: 800 mm, CNC controller: Fanuc, coolant supply through spindle: 70 bar, Condition: new, Year of construction: 2023, New machine ready for pre-acceptance Control: Fanuc Spindle diameter: 150 mm X-axis: 3000 mm Y-axis: 2000 mm Z-axis: 1500 mm W-axis: 800 mm Spindle taper: SK 50 Dmmok9 Main motor power: 37 kW S1 Table dimensions: 1800 x 2200 mm Max. table load: 20 t ATC 40 H Internal cooling: 70 bars

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

9

Cantù

6,845 km

CNC Horizontal panel saw with clamps

GIBEN STARMATIC 850

Price info Price info Already requested Call

Condition: good (used), Code: 0068 Brand: GIBEN Model: STARMATIC 850 - CE Standard CNC Horizontal panel saw with clamps for cutting wood panels, plywood, furniture, composite materials, sandwich panels, plastics and various materials - CE Standard Technical data: Useful cutting length 4500 mm Automatic pusher with lateral upper guides, electronically controlled, complete with 6 pneumatic clamps- Clamps opening 117 mm - Pusher stroke 4550 mm Max blade projection 85 mm Max main blade diameter 360 mm Main blade motor 7,5 kW - Rpm 3827 Max scoring blade diameter 160 mm Scoring blade motor 1,1 kW - Rpm 8290 Scoring exclusion with selector Quick tool removal (Pneumatic) Automatic adjustment of main blade overhang according to stack height Adjustment (lateral and in height) of outside scoring unit Blade carriage translation by brushless servomotor Blade carriage feed speed 1-80 m/min Blade carriage return speed 80 m/min Presser with unique structure Lateral aligner with automatic positioning Cu7y8ndzhl Alignment stroke 50-1600 mm Working table height 950 mm 4 Air curtain support tables - size 2000 x 510 mm Positioning control by encoder Material sliding tables in pusher area with wheels Manual loading of panels from the front G-DRIVE control system on PC for programming cutting patterns and machine control Overall dimensions of assembled machine: mm 7250 x 8000 x 1800 h

Price info Price info Already requested more

Listing

Baden-Württemberg, Deutschland

6,829 km

used cnc horizontal MC

Mazak FH-6000

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2000, used Mazak FH6000 horizontal machining center Year 2000 /06 number of tool magazine places 80 / ATC 80 tool holder SK50 / max. tool length 500mm / max. tool diameter 260 / 135mm (with free adjacent places) / max. tool weight 30kg Tool holder package total machine running time: 87085hd. Spindle revolutions: 7,000 rpm / 7,000 RPM. New spindle since 2017 currently has 10,657hrs. Y-Couver 09/2018 Operation 8std / per day X-way 800 Y-way 800 Z-way 800 Rapid traverse: 40 m/min Control Mazatrol Fusion 640M Coolant system with IKZ MAYFRAM CONSEP 2000 RENISHAW measuring probe / 11/2019 Pallet size: approx. 500 x 500 mm Number of pallets 2 Special equipment: pallet changer Total power requirement 60,4 KVA Weight 18.700Kg The machine can be inspected by appointment. Be3ejfuzhc8 Changes and errors in the technical data and information and prior sale subject to change!

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Beringen

6,886 km

Table type horizontal borer

PFEIFER F75-1

Price info Price info Already requested Call

Condition: ready for operation (used), Spindle diameter 75mm Spindle taper Mt5 Spindle stroke 500mm Table size 1000x850mm Cross travel 800mm Longitudinal travel 1300mm Gut0o2r Vertical travel 1000mm Misc.accessories MARCELS MASCHINEN CH

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

3

Plovdiv

5,575 km

NH4000 DCG CNC Horizontal Machining

Mori Seiki NH4000 DCG

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2011, Axis travel: 560x560x620 mm MSX-501 control system R3vixv8m8 Machine is stocked in our Bulgaria warehouse. For further questions, You are welcome to contact us.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

8

Unterschleißheim

(dealership location)

6,664 km

Band Saw - Automatic - Horizontal

BEHRINGER HBP 360 A - CNC

Price info Price info Already requested Call

Condition: used, Year of construction: 1999, Operating range - Ø / flat 360 / 360 x 360 mm smallest material dimension - Ø / flat 15 / 10 x 15 mm dimensions of saw-band 5400 x 41 x 1,3 mm Control Behringer fuse 25 A min. cut-off length 10 mm cutting speed 19 - 130 m/min power capacity 5,5 kW feeding 2 - 610 mm cutting length 10 - 9999 mm total power requirement 9 kW weight of the machine ca. 3000 Kg dimensions of the machine ca. 2,5 x 3,1 x 2,2 m bundle clamping devic Hc3u9qsew follow job automatic Cutting-line laser LAP type HD chip conveyor Coolant system Minimal quantity lubrication no roller conveyors chip brush

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Tuřanka 1319/104, 627 00 Slatina, Czechia

6,299 km

Horizontal Boring Mill - Table Type

Fermat WFT 11 CNC

Price info Price info Already requested Call

travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, table load: 10,000 kg, spindle diameter: 110 mm, spindle speed (max.): 4,000 rpm, motor power: 31,000 W, table length: 1,800 mm, table width: 1,400 mm, travel distance W-axis: 730 mm, CNC controller: Heidenhain TNC 640, coolant supply through spindle: 20 bar, Condition: new, Year of construction: 2023, New machine ready for pre-acceptance from the week 5 / 2024 Control: Heidenhain TNC 640 Spindle diameter: 110 mm X-axis: 3000 mm Y-axis: 2000 mm Z-axis: 1250 mm W-axis: 730 mm Spindle speed: 4000 rpm Spindle taper: SK 50 Main motor power: 31 kW S1 Table dimensions: 1400 x 1800 mm Eltdhy7v7 Max. table load: 10 t ATC 40 H Internal cooling: 20 bar

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Spodnja Brežnica 14, 2319 Poljčane, Slovenia

6,350 km

Horizontal boring mill FERMAT WHN 13 CNC

TOS - FERMAT WHN 13 CNC

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2005, CNC drilling and milling center, manufactured by TOS Varnsdorf WHN 13 /Heidenhein 530 Bfsbaufrcxa The engine and steering were restored in 2005 Heidenhein TNC 530 controls Spindle fi 130 mm, ISO 50 Table size: 2,200 x x1,800 mm 360° rotatable table Table load capacity: 12,000 kg Moves: X: 3,500 mm Y: 2,500 mm W: 1,250 mm W: 800 mm Traversing speed in all axes: 4-3,000 mm/min Fast movements: 6 m/min Main spindle: Spindle drive: 37 kW no. RPM: 5-1250 min-1, stepless complete with Heidenhein TNC530 control Required connection for the entire machine: 50 kW Machine dimensions: approx. 7.2x7.8x5 m

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Hradec Králové

6,367 km

HORIZONTAL BORRING MACHINE

TOS VARNSDORF WHN 13,8 CNC

€95,500

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), Year of construction: 2001, WHN13,8 (retrofit in 2001)price is with desmantling and loading. Bl8yzr99b If you want any information, please write me. 5 axis , Heineheim TNC 430, perfect codition. Spindle speed 2500. X 3.500mm, Y 2.000mm.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

15

104. SK. No:9 D:Sitesi A Blok, 34776 Dudullu Osb/Ümraniye/İstanbul, Türkiye

5,188 km

CNC HORIZONTAL MACHINING CENTER

DMG MORI DMC 55 H DUOBLOCK

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2008, STOCK NUMBER Z100000331 CONTROL SIEMENS 840 S SL SOLUTIONLINE 7u0cirk70i AXIS MOVEMENT X 560 MM / Y 600 MM / Z 600 MM / B 360 ° / 0.001 ° SPINDLE SPEED 12.000 MIN/-1 MAIN SPINDLE DRIVE POWER 19 ( %40 ) / 28 ( %100 ) KW TORQUE 121 Nm (%40 ) / 82 Nm (%100 ) TOOL HOLDERS SK 40 NUMBER OF TOOLPOSITIONS 60 TABLE SURFACE AREA 400 X 400 MM MAX. TABLE LOAD 500 KG WEIGHT OF THE MACHINE 12.000 KG DIMENSIONS OF THE MACHINE 2.66 X 4.12 X 2.47 M

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

3

Metzingen

6,834 km

Surface Grinding Machine - Horizontal

GEIBEL & HOTZ FS 635-Z CNC

Price info Price info Already requested Call

Condition: used, Year of construction: 1999, grinding length 600 mm grinding width 350 mm workpiece height 385 mm total power requirement 19 kW weight of the machine ca. 2,3 t Jcmjbngr9 dimensions of the machine ca. m

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Niederhelfenschwil

(dealership location)

6,841 km

Surface Grinder, horizontal

STEFOR RTC 40/10 CNC

Price info Price info Already requested Call

Condition: used, Year of construction: 1991, CONTROLS .. CNC controls SIDIC WORKING RANGE SURFACE GRINDING .. grinding length: 4000 mm .. grinding width: 1000 mm TABLE (SURFACE GRINDING) .. magnetic table: yes MAGNETIC TABLE B9ezlmgpy7 .. length: 800 mm .. width: 500 mm .. height: 60 mm GRINDING TOOL .. type of grinding tool: wheel .. diameter (max): 500 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 10500 mm .. space requirements -front/back-: 2600 mm .. total height: 3500 mm .. total weight approx.: 25200 kg ATTACHMENTS (GRINDING) .. Flange of grinding wheel: no Equipment - There are 4 magnetic plates (each 800x500x80mm) distributed on the table length - Belt filter

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

11

Tuřanka 1319/104, 627 00 Slatina, Czechia

6,299 km

Horizontal Boring Mill - Table Type

Fermat WFT 13 CNC

Price info Price info Already requested Call

travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, table load: 20,000 kg, spindle diameter: 130 mm, spindle speed (max.): 3,400 rpm, motor power: 37,000 W, table length: 2,600 mm, table width: 1,800 mm, CNC controller: Fanuc, Condition: new, Year of construction: 2023, New machine ready for pre-acceptance from the week 50 / 2023 Control: Fanuc Spindle diameter: 130 mm Cvxhetidp X-axis: 4000 mm Y-axis: 2500 mm Z-axis: 1500 mm W-axis: 800 mm Spindle speed: 3400 rpm Spindle taper: SK 50 Main motor power: 37 kW S1 Table dimensions: 1800 x 2600 mm Max. table load: 20 t ATC 40 H Internal cooling: 20 bar

Price info Price info Already requested more

Save search query