Used Cnc Lathe for sale (11,425)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, USED Taiwan Takisawa model EX-108 high performance 2-Axis CNC lathe. Serial Number CA11E80453 Year 2000. NOTE THIS IS A 2 AXIS MODEL EX108 NOT A 3 AXIS EX308. • Heavy Cast Iron Slant Bed Construction • Fanuc 21iT CNC Control • 4-Track Heavy Duty Linear Guideways • High Speed Servo Turret Pgsdst E Hvgjpfx Ab Isw • Tool Setting Device • 8” 3-Jaw Hollow Spindle Hydraulic Chuck • Parts Counter • Toolholders included Max. Swing Over Bed - 400 MM Max. Swing Over Cross Slide - 320 MM Distance Between Centres - 645 MM Standard Turning Diameter - 216 MM Max. Turning Diameter - 320 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X-Axis Stroke - 180 MM Z-Axis Stroke - 530 MM Spindle Speeds - 60 – 4000 RPM Spindle Nose - A2 – 6 Spindle Bore - 63 MM Turret Type - 12 Station Tailstock Stroke - 435 MM Tailstock Quill Stroke - 100 MM Tailstock Quill Taper - 5 MT Rapid Traverse (X & Z) - 20 & 24 M/Min Jog Feed Rate (X & Z) - 0 – 1260 MM/Min Spindle Motor - 7.5 / 11 KW Electrics - 415V,3PH,50HZ Floor Space - 2240 MM X 1645MM Machine Weight - 4300 KGS

Condition: good (used), Year of construction: 2014, operating hours: 9,554 h, functionality: fully functional, machine/vehicle number: SL8-1620455DJAAH, turning diameter over cross slide: 300 mm, turning diameter: 256 mm, spindle speed (max.): 4,800 rpm, travel distance X-axis: 198 mm, travel distance Z-axis: 508 mm, rotational speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 6,000 mm, total width: 2,200 mm, feed rate X-axis: 19 m/min, feed rate Z-axis: 24 m/min, overall weight: 5,500 kg, bar passage: 50 mm, bar diameter (max.): 32 mm, controller manufacturer: HURCO, controller model: MAX, positioning accuracy: 0.01 mm, repeat accuracy: 0.005 mm, operating hours of spindle: 2,027 h, HURCO TMM8i CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 40 A - Connection: 28 kW - Max. swing diameter: 525 mm - Max. diameter over cross slide: 300 mm - Chuck diameter: 200 mm - Acceleration: 0 - 3000 rpm - Turret type: VDI 30 - With a total of 12 stations - Max. spindle speed: 5000 rpm - Indexing time: 0.23 sec Pgedpexw Sr Defx Ab Isw - Max. boring bar diameter: 32 mm - Tool shank cross-section: 19 mm - Including powered tool stations The machine is equipped with a bar feeder from BREUNING, type: ILS MUK 7012-III, year of manufacture: 2017. Also included are a chip conveyor, tailstock, and a three-jaw chuck with a diameter of 200 mm. Attention: The item must be collected firmly and bindingly between 19.01.2026 and 23.01.2026 on a date to be agreed. FCA D-76571 Gaggenau – loaded on truck.

Condition: used, Year of construction: 2011, turning diameter 460 mm turning length 795 mm control MORI SEIKI M730 BM Swing diameter face slide 590/360 mm spindle passage 80 mm Traverse X/Z: 260/795 mm Number of working hours 19.552 h Cutting time 10.704 h spindle drive 18,5 kW total power requirement 40 kVA weight of the machine ca. 6,4 t Pedpfx Aboxwzfye Iegw dimensions of the machine ca. 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV max. bar length 1,600 mm

Condition: excellent (used), Year of construction: 2001, turning length: 8,000 mm, turning diameter over bed slide: 2,000 mm, workpiece weight (max.): 25,000 kg, turning diameter over top slide: 1,550 mm, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Spindle bore: 150mm Pgedpfxsxxxbzo Ab Iow Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter: 42 mm, spindle speed (max.): 7,000 rpm, rapid traverse Z-axis: 60 m/min, overall weight: 5,500 kg, bar passage: 42 mm, bar diameter (max.): 42 mm, power: 57 kW (77.50 HP), bar length: 3,300 mm, Equipment: documentation/manual, rotational speed infinitely variable, 3 turrets Main and counter spindle C-axis on main and counter spindle Conveyor belt Podpexwwd Sjfx Ab Ijgw IEMCA Boss – bar feeder Chip conveyor High pressure Machine operates with emulsion

Condition: excellent (used), Year of construction: 2022, operating hours: 2,963 h, functionality: fully functional, TECHNICAL DATA - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 42 mm - Travel: 100 mm - Spindle speed: 6,000 rpm - Spindle drive power: 7.5/5.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 34 mm - Spindle speed: 5,000 rpm - Spindle drive power: 5.5/3.7 kW - Minimum C-axis resolution: 0.001° - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 8 - Travel X: 140 mm - Travel Z: 235 mm - Travel Y: 70 mm (+/-35 mm) - Driven tool speed: 5,000 rpm - Driven tool power: 1.0 kW LOWER TURRET HEAD - Number of positions: 6 - Travel X/Z: 140 / 310 mm ELECTRICAL SUPPLY - Total connected load: 30 kVA WEIGHT AND DIMENSIONS - Required floor space: 2,220 x 1,460 mm - Machine height: 1,700 mm - Machine weight: 3,100 kg Pgodpfjw Igyrex Ab Iow

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Serial number CF02E30091 Year 2005 Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Built in Oil Cooled Spindle Motor with Full C-Axis Programmable Tailstock Quill 8” 3-Jaw Hollow Spindle Hydraulic Chuck Tooling Package including two driven tool holders Swing Over Bed - 450 MM Distance Between Centres - 645 MM Max. Turning Diameter - 260 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X Axis Stroke - 180 MM Z Axis Stroke - 530 MM Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 RPM Driven Tool Motor - 1.1/3.7 KW Tailstock Travel - 435 MM Tailstock Quill Travel - 100 MM Podjt Dzz Iepfx Ab Iegw Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 KW Floor Space - 2360 X 1745 MM Machine Weight - 4300 KGS

Condition: like new (used), Year of construction: 2022, CNC Lathe Hyundai Wia SE2200MA Pjdpfx Absxr H Ipj Iegw Year of manufacture: 2022 FANUC i Series Smart Plus Touch C axis, driven tools Max. bar diameter: 51mm Max. turning diameter: Ø300mm Max. turning length: 309mm Chuck size: 170mm Max. travel (X/Z): 210/340mm BMT 45 turret - Tool probe - Parts catcher - Programmable tailstock - Documentation - Chip conveyor - 2 driven tool holders

Condition: excellent (used), CNC cycle lathe Haas TL1 (Machine from training) Year of manufacture: 2010 Spindle hours approx. 500 Swing diameter over bed: 508 mm Swing diameter over cross slide: 279 mm Turning length: 762 mm Wedge bar chuck ROTA-S 200 (Prepared for hydraulic chuck with foot pedal) Travel paths: X: 203 mm Z: 762 mm Pgsdpfx Abjxwtqbe Ijw Rapid traverse X/Z: 11.4 m/min Drive power: 7.5 kW Torque: 146 Nm Spindle bore: 58 mm The machine comes from training and was only rarely used. Therefore, the low spindle hours. Very good condition and immediately ready for use.

Condition: used, Year of construction: 2001, turning diameter 210 mm Podpoxwzhuefx Ab Ijgw travel: . x-axis 215 mm z-axis 508 mm Number of tools in turret 10 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: new, functionality: fully functional, Universal centre lathe ŠKODA SRM 125 - 4000 after modernization of the mechanical part of the machine. The electrical part is equipped with Siemens CNC control: SIEMENS SINUMERIK 828D with SINAMICS drives. Technical data: Maximum swing over bed: 1,250 mm Maximum swing over carriage: 900 mm Maximum distance between centres: 4,000 mm Maximum workpiece weight: 14,000 kg Pgedpoxyxdxofx Ab Iew Maximum torque: 34,000 Nm Minimum turning diameter: 200 mm Bed height: 620 mm Bed width: 1,100 mm Spindle nose: No. 10 Number of speed ranges (infinitely variable in each range): 3 Spindle speed range: 1.4 – 350 rpm Main spindle drive motor: 39 kW, fixed gear ratio 1:3 Maximum workpiece diameter in jaws: 1,030 mm Spindle centre taper: 80 mm – 1:10 Centre height above bed: 630 mm Carriage: Feed rate (Z and X axes): 2,000 mm/min Rapid traverse (Z axis): 6,000 mm/min Rapid traverse (X axis): 3,000 mm/min Traverse motor (Z axis): Siemens 1FK7 101, 27 Nm, with planetary gearbox Traverse motor (X axis): Siemens 1FK7 060, 6 Nm, with planetary gearbox Maximum tool section: 70 × 70 mm Maximum tool section for turret head: 50 × 50 mm Tailstock: Quill stroke: 200 mm Tailstock centre taper: 80 mm, 1:10 Tailstock feed rate: 2,000 mm/min

Condition: used, Year of construction: 2021, operating hours: 3,557 h, functionality: fully functional, Technical data With FANUC 0i-MF control - Table dimensions: 850 x 400 mm - Max. table load: 250 kg - Table height from the floor: 850 mm - Travel paths: - X-axis: 710 mm - Y-axis: 400 mm - Z-axis: 350 mm Spindles, tools and axes - Spindle speed: 12,000 min⁻¹ - Spindle cone: BBT 30 - Max. number of tool positions: 20 - Rapid traverse (X, Y, Z): 60 m/min - Tool dimensions: - Max. tool diameter: Ø 68 mm - Max. tool length: 200 mm - Max. tool weight: 3.0 kg - Tool change time: 0.9 sec Drive power - Main spindle: 13 kW - Coolant pump: 3.7 kW Machine data - Dimensions: 2,100 x 2,600 mm - Machine height: 2,700 mm - Machine weight: 3,150 kg Control - Type: FANUC 0i-MF with 8.4" LCD color monitor Automatic door The machine is equipped with an automatic door that makes it easier to open and close the machine. This ensures greater user-friendliness and safety during operation. The machine is equipped with a Keyarrow chip conveyor that ensures the efficient transport of chips and makes cleaning easier. First commissioning: 03.2021  Disclaimer Disclaimer: Podpfx Absvzaw To Ijgw All technical data and information have been provided to the best of our knowledge and belief. We accept no liability for any errors or mistakes. Please check the information carefully and do not hesitate to ask questions if you have any questions.

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Year 2005 CF03E30096 Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Built in Oil Cooled Spindle Motor with Full C-Axis Programmable Tailstock Quill 8” 3-Jaw Hollow Spindle Hydraulic Chuck Tooling Package including two driven tool holders Swing Over Bed - 450 mm Distance Between Centres - 645 mm Max. Turning Diameter - 260 mm Max. Turning Length - 530 mm Bar Capacity - 52 mm X Axis Stroke - 180 mm Pgjdpfst N Sitjx Ab Ijw Z Axis Stroke - 530 mm Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 Rpm Driven Tool Motor - 1.1/3.7 kW Tailstock Travel - 435 mm Tailstock Quill Travel - 100 mm Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 kW Floor Space - 2360 X 1745 mm Machine Weight - 4300 Kgs Electrics - 415 V, 3 Ph, 50 Hz

Condition: new, Year of construction: 2025, 0554 mm Pgjdoxxb A Uepfx Ab Iow 2000 mm 277 mm 104 mm 400 mm 2000 U/min D1-11 DIN 55029 95 mm 145 mm

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 3,200 mm, turning diameter: 900 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, spindle motor power: 45 W, total height: 2,780 mm, total length: 7,360 mm, quill travel distance: 150 mm, quill diameter: 160 mm, swing diameter over cross slide: 800 mm, overall weight: 21,800 kg, swing diameter over bed slide: 1,030 mm, bar passage: 164 mm, spindle nose: A1-15, Doosan Puma 700L Large Capacity Lathe Built 2014 Psdewqf Uuspfx Ab Iegw Accessories include Swarf Conveyor, Tailstock with Mt #6 Taper, SMW Hydraulic Steady, 800mm 3 Jaw Chuck, FANUC 32i Control.

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 395 mm Turning length : 450 mm Mainspindle: Technology:Belt-driven spindle Speed:4.500 rpm Power (max.):20 kW Torque (max.):169 Nm Bar capacity:67 mm Workpiececlamping:3-Jaw chuck, Samchully MH-208 BVI Subspindle: Technology:Motorspindle Pgjdpfx Aoxv Nlljb Ijw Speed:6.000 rpm Power (max.):7,8 kW Torque (max.):45 Nm Workpiececlamping:3-Jaw chuck, Samchully HS-06VI Movement in B:580 mm Rapid travers in B:24 m/min Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:BMT55 Tooldive:5.000 rpm, 9,3 kW, 44 Nm Movement in X/Y/Z:235/105/580 mm Rapid travers in X/Y/Z:24/10/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with Oilskimmer and Highpressure, 10bar Toolmeasurement:Automatic Measuringarm Rawmaterialfeed I:Interface Barloader prepared Rawmaterialfeed II:Automatic Working Door and Interface Robot prepared Finsihedpartremoval:Part catcher with collecting box Setup operations:Electronic Handwheel Further Equipment:Trafo

Condition: good (used), Year of construction: 1999, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 570 mm, Swing over bed Ø: 570mm Swing over cross slide Ø:365mm DBC Turning Length: 2000mm Spindle bore: 62mm Spindle power: 25kW Tailstock spindle Ø: 100Ø Stroke pinole: 190mm Spindle taper: 4Mk Pgjdpfxjxxh N Ue Ab Iow Workpiece weight: 2500 Speeds / ranges: 2500Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 10000mm/min. Length: 5200mm Width: 2200mm Height: 2100mm Weight: 5200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 2,040 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, Okuma CNC Oil Country Hollow Spindle Lathe Psdpfoxzi D Sex Ab Iogw Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Pgjdpfx Abexwdw Ee Isw Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Gyártó: SIM Tip: EPA 220 Pgsdpfxoh T T Dke Ab Ijw Rúdadagolóval szerelve

Condition: good (used), Year of construction: 2013, Ref. -No.: 10607 Manufacturer: GEMINIS Type: GT5 - G2 1200 x 1000 Year of construction: 2013 Type of control: CNC Control: Siemens 840 D - SL Storage location: Halberstadt Country of origin: Spanien Machine-No.: 220XXXX Pjdoxvw R Ajpfx Ab Isgw Turning Diameter Over Bed: 1200 mm Centre Height: 615 mm Centre Distance: 1000 mm Travel -X Axis: 1260 mm Traverse path of the crossbar: 603 mm Rapid Traverse: 8000 mm / min cross-section: Ø 850 mm Machine length: 5830 mm Machine width: 3350 mm Machine Height: 2700 mm Weight Of The Machine Ca.: 14 t

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 430 mm Turning length : 1530 mm Mainspindle: Technology:Belt spindle Speed:2,000 rpm Pedpfx Ajxv Nlfsb Iegw Power (max.):33 kW Torque (max.):2,315 Nm Bar capacity:117.5 mm Workpiece clamping:3-jaw chuck, Samchully HCH-15 Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Tool holder:BMT24 Tool drive:4,500 rpm Travel in X/Y/Z:280/130/1,605 mm Rapid traverse in X/Y/Z:30/10/30 m/min Equipment/Accessory: Chip management:Chip conveyor Coolant management:IKZ pump with oil skimmer and high pressure, 10 bar Tool measurement:Automatic measuring arm Raw material feed I:Bar loader interface prepared Raw material feed II:Automatic work area door and robot interface prepared

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 1,200 mm, turning diameter: 600 mm, Heidenhain plus IT CNC control 8 fold turret head 3-jaw chuck 315mm diameter tailstock coolant device chip conveyor Technische Daten / technical details: max. Drehdurchmesser über Bett / max. turning diameter over bed 600 mm max. Drehdurchmesser über Schlitten / max. turning diameter over sledge 410 mm max. Drehlänge / max. turning length 1200 mm Planweg (x) / cross way (x) 320 mm Längsweg (z) / longitudinal way (z) 1250 mm Drehzahlbereich / spindle speed 3000 UpM /rpm Werkzeugrevolver / turret head 8 fach /holes Reitstockaufnahme / tail stock taper MK 5 Podpfxewnwz Uo Ab Iegw Eilgang X/Z / rapid feed X/Z 15 m/min. Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 24/18 kW Gewicht der Maschine ca. / weight 5500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2000, machine/vehicle number: 202000, Hegenscheidt MFD 7893 CNC Deep Rolling Machine Pjdjxxyluepfx Ab Iegw max length 920mm, max radius of counter weight (deending on dtroke and bearing width) 195 - 270mm, max 8 main + 6 pin bearings, min/max main bearing dia 33 - 88mm, min/max pin bearing dia 30 - 84mm, max bearing width 18,5mm, max stroke 140mm, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 35kVA, weight 13to

Condition: good (used), Year of construction: 2009, Ref. -No.: 10523 Manufacturer: DMG GILDEMEISTER Type: NEF 600 Year of construction: 2009 Type of control: CNC Control: SIEMENS SINUMERIK 840D SL Storage location: Halberstadt Country of origin: Germany - Japan Turning Speeds: 4.000 RPM Tool holder type: VDI 40 DIN 69880 X stroke: 398 mm Y stroke: 1250 mm C-Axis: ° Turning Length: 1.200 mm Swing Diameter Over Bed Slide: 490 mm Spindle Diameter In Front Bearing: 160 mm Spindle Bore: 118 mm Spindle nose: 220h5 Spindle Speed Min.: 3.500 RPM Max. Torque: 790 / 590 Nm Rapid Travel Speed X-Axis: 30 m / min Pgsdoxvw Ibjpfx Ab Isw Rapid Travel Speed Z-Axis: 30 m / min Main Drive: 20 - 4000 kW Total Power Requirement: 50 kW Max. Rod diameter: 92 mm Spindle 1 chuck diameter: 315 mm Max feed rate: mm / min Power Capacity: 37 / 28 kW Turret places: 12 Pcs Machine length: 6500 mm Machine width: 3500 mm Machine Height: 2300 mm Weight Of The Machine Ca.: 5,3 t Further information: Tailstock: Tailstock displacement: 1,150 mm Clamping force: 12.5 kN Tailstock holder: MK 5 Machine is still in production and can be inspected at any time.