Used Erika 60 for sale (20,582)

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 Dodpey H Aizefx Aa Nocg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2005, Hedelius RS 60 K - 2000 Year of manufacture: 2005 Control: - Heidenhain iTNC 530 - Electronic handwheel Main spindle: - SK40 - Max. spindle speed: 15,000 rpm Travel paths: - X – 2000 mm (775 + 600) mm, Y – 620 mm, Z – 520 mm Table: - Clamping area fixed table 1200 x 600 mm (left working area) - NC rotary/tilting table (right working area) - NC rotary table, 360° rotatable / tilting +15 / -95° Coolant: - 20 bar through-spindle coolant (IKZ) - Chip conveyor Dedpfoy H D S Djx Aa Nscg Extraction: - Emulsion mist extraction system Delivery time: - Immediately available

Condition: excellent (used), Catalogue number: 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: Djdjytdkxopfx Aa Necg - Toothed feed roller - Kickback pawls - 2 pressure rollers - Toothed feed roller - Pressure roller - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure rollers - Smooth feed roller From below: - Guide bar - Adjustable infeed table with split, smooth sliding shaft - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure roller At the rear: - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle, 160 mm, adjustable up/down and left/right + tilting, approx. 4 kW - Planing possible with the additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers on lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction port diameters: 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Approx. weight: 3,000 kg ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, floorboards, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Complete with cutterheads - Manufactured by German brand KUPFERMUHLE - Used planer in very good condition - Original photos Net price: 58,900 PLN Net price: 14,020 EUR (based on exchange rate €1 = 4.2 PLN) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg Dcedpsyz Sfbefx Aa Nsg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7303 TECHNICAL DATA - Cutterhead width: 640 mm - Number of knives: 3 pcs - Max. thickness of workpiece: 250 mm From above: - Pawls - Toothed, feed-in roller - Hold-downs - Planing shaft - Hold-downs - Smooth, feed-out roller From below: - Adjustable rollers on lower table: 2 pcs - Motor: 7.5 kW - Electric table lift - Lift motor: 0.75 kW - 4 feed speeds - Feed motor: 1.5 kW - Extraction port diameter: 140 mm - Dimensions (L/W/H): 1120x1250x1680 mm - Weight: 1033 kg – Made in Poland – Used thickness planer, very good condition Original photos Dcsdpeymm Hcsfx Aa Nsg Net price: 21,900 PLN Net price: 5,200 EUR (conversion rate 4.2 EUR) (Prices may change due to exchange rate fluctuations)

Condition: excellent (used), Catalogue no. 6815 TECHNICAL DATA - shaft width: 640 mm - number of knives: 4 pcs - max workpiece thickness: 230 mm top side: - toothed feed shaft, driven, sequential - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, driven bottom side: - feed roller + infeed table - adjustable roller in lower table - outfeed table + roller - main motor: 5.5 kW - stepless feed speed adjustment - feed motor: 0.5 kW - extraction port diameter: 150 mm - dimensions (LxWxH): 1630x1630x1140 mm - weight: 920 kg FEATURES - Italian-made - used thickness planer, in very good condition Dedpfxoytd A Uj Aa Njcg Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6935 TECHNICAL DATA - Shaft width: 630mm - Number of knives: 4 pcs Djdpfx Ajytd Uqea Necg - Max. thickness of workpiece: 210mm * Top section: - Anti-kickback fingers - Serrated feed roller, driven - Pressure bars - Planing shaft - Pressure bars - Smooth outfeed roller, driven * Bottom section: - Adjustable rollers on the lower table: 2 pcs - Motor: 4.4kW - 2 feed speeds - Dimensions (L/W/H): 1220x950x1060mm - Weight: 750kg ADVANTAGES – Made in Germany – Used thickness planer, very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may vary in case of significant currency fluctuations)

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar Dodpfx Aajyfhiio Nocg - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls Djdpfeyaq Tajx Aa Njcg - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, type of input current: three-phase, overall weight: 350 kg, input voltage: 400 V, total length: 500 mm, total width: 520 mm, total height: 1,200 mm, input frequency: 50 Hz, DGUV certified until: 05/2027, Dough dividing and rounding machine Roll divider Record Semi-automatic, 36-piece Dividing head NEWLY overhauled NEW stainless steel blade Dough capacity up to 2100g Includes 3 rounding plates Connection: 400V, 16A-CEE plug Dimensions: 520 x 500 x 1200 mm (W x D x H) Refurbished used machine with warranty + spare parts service Option: ONLY WITH US! New rounding plates Delivery service Stainless steel platform Maintenance contract Dcsdpeuav Itefx Aa Nsg Service package E-box Instruction & commissioning You will only find a large selection of roll dividers with us!

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 05/2027, type of input current: three-phase, year of last overhaul: 2026, Record Roll Press Semi-Automatic for consistent quality! Dividing head NEWLY redesigned Stainless steel knives NEW simple, robust engineering! with 3 forming plates only from us: DGUV V3 tested Connection: 400V, 16A-CEE plug Dimensions: 520 x 500 x 1200 mm (WxDxH) Dcsdpoy Ebkbofx Aa Neg Refurbished used machine, SAB inspected with warranty & spare parts service Visit our large showroom!

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Stator blades: 2 Dcsdpsufi Rxofx Aa Njg plus blade set: 2 Blade setting table

Condition: good (used), functionality: fully functional, overall weight: 540 kg, total length: 580 mm, total width: 690 mm, total height: 1,650 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: three-phase, Roll Press Record Automat Dough Divider and Rounder Record Automat 30-piece Roll press for dividing and rounding with rounding plate Connection: 400V, 16A-CEE plug Dodpfxoyurilo Aa Njcg Dimensions: 690 x 580 x 1650 mm, W x D x H Used machine Visit our large exhibition!

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: three-phase, year of last overhaul: 2026, Bun Divider Rounder Erika Record Automat Erika Record Automat, 30-part Divider head – NEWLY refurbished Stainless steel knives – NEW Includes 3 rounding plates Easy to clean DGUV V3 tested exclusively by us Dsdpfeyurfmox Aa Nscg Connection: 400V, 16A-CEE plug Refurbished used machine Warranty + spare parts service Visit our extensive selection!

Condition: excellent (used), High-quality and very clean condition – well maintained automatic shrink wrapping line consisting of Lady Pack Auto 60 shrink wrapping machine and Madax shrink tunnel. This is a reliable industrial packaging solution suitable for a wide range of products including boxes, printed materials, cosmetics, food products, and general consumer goods. The machine offers automatic operation, making it ideal for efficient and consistent packaging in production environments. Main features • Manufacturer: Lady Pack (Italy) • Model: Auto 60 • Automatic shrink wrapping machine • Included shrink tunnel: Madax • Complete packaging line • Industrial quality construction • Easy operation and maintenance Condition The machines are in good working condition. Previously used in production and well maintained. Logistics Machines are available for immediate pickup. Loading assistance available. Located in Finland. Additional information • Suitable for industrial and commercial packaging • Reliable and proven technology • Compact and efficient line. Higher capacity alternative to semi-automatic machines. Dsdpoywpabefx Aa Nscg Can be connected and tested before purchase. After all, very clean condition – well maintained and ready for production use. Keywords: Shrink wrapping machine Automatic shrink wrapper Lady Pack Shrink tunnel Packaging machine L sealer

Condition: good (used), Technical data for the pallet rack beam: Racking system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x pallet rack beam, used Material color: yellow Box profile: 60 x 40 mm Beam type: TRV1-270-064-30 CE Clear span: 2,700 mm Bracket: 5 HK (hooks) 02x safety pins, used Design: fully galvanized For securing the cross beams Dcsdpoynlraefx Aa Neg against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is desired, additional costs will apply. These can be requested from us separately depending on the delivery location and scope of delivery.

Condition: new, • EPB Graflex A700 60 boring head • Made in France • Working range: • Capacity 1: 85–115 mm (3.345–4.530”) • Capacity 2: 114–144 mm (4.485–5.670”) • Precision adjustment 0.01 mm (0.0004”) • Catalogue no.: 1605.014.24 • Graflex system – for professional applications • The head is in storage condition • No evidence of use. Only minor storage scratches • Sockets and scales in perfect condition • Mechanism operates smoothly and easily Dcedpfow Rdybjx Aa Neg • Ready for immediate use • EPB Graflex stands for proven quality and reliability

Condition: good (used), input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, Dough Divider and Rounder Record Automat Dcjdpforhfp Uex Aa Nog Roll Press for dividing and rounding Dough input from 750 to 2550 grams 30 pieces / 25 to 85 grams per piece with 3 rounding plates Connection: 400V, 16A-CEE plug Dimensions: 690 x 580 x 1650 mm (W x D x H) Used machine Delivery service Many more roll presses in stock!

Operating hours: 54,000 h, condition: ready for operation (used), functionality: fully functional, CINCINNATI PROTON 60-30G Screw diameter: 60 mm, L/D = 30 Grooved feed section Dsdpfxoyrihgo Aa Necg Throughput: approx. 450 kg/h PE Motor (DC drive): 163 kW Screw speed: max. 221 rpm Tool zones: 5 pcs + 1 pc for adapter Melt pressure & temperature sensors included Control system: Cincinnati EXc Pro-NT Cylinder in bimetal design – condition: good Screw with wear-protection and hardened feed section – condition: good Dimensions (L x W x H): 2,580 x 1,430 x 1,800 mm Weight: 2,500 kg

Condition: like new (used), Year of construction: 2008, volume flow: 3,700 m³/h, power: 2.1 kW (2.86 HP), input frequency: 50 Hz, Systemair KTEX 60-35-4 Atex fan 2.1kw 3700m3 duct mount KTEX fans feature a compact, streamlined design, high-performance forward-curved radial impeller and reliable ATEX-rated AC motors. power 2.1 Kw Voltage 230/ 400V 50Hz 5.8/3.8A IP44 power 2.1 KW Air flow max 3.704 m³/h Pressure: 580 Pa Impeller rotation: 1.392 rpm Air flow max 3.704 m³/h Minimum static back pressure 225 Pa Conveyed air temperature max 40 °C Maximum temperature of the conveyed air when speed is controlled 40 °C Insulation class F Explosion-proof designation II 2 G Ex eb h IIB+H₂ T3 Gb Certificate Presafe 17ATEX9970X Ambient and pipe temperature -20 to 40 °C Dimensions and weights inlet (height x width) 350 x 600 mm Dsdpfevu Hrkex Aa Necg outlet (height x width) 350 x 600 mm Weight 42 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, stroke adjustment: 75 mm, Equipment: documentation/manual, safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD Dedpfsu Hav Rox Aa Necg type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, ram adjustment: 75 mm, stroke adjustment: 75 mm, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Inovance IT600 control required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw Dcsdpfx Aasu Hautj Neg machine weight: 5600 kg

Condition: good (used), Four-way tool post Dcsdpfx Aaodcwzus Nog Steel height 60 mm Dimensions: L 190 x W. 185 mm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Scope of supply: 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Dodpfx Aorfucfea Necg Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Dcedpfx Ajwc Afhsa Nog Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.