Used Destacking device for sale (65)

Year of construction: 2012, Condition: ready for operation (used), Machine no: 483 Year of manufacture: 2012 Technical data Belt length: 3900 mm Bwsbvqov Rpxfou Daol Belt width: 1350 mm Total width: 1900 mm Max weight on belt: 400 kg Motor: 0.37 kW, 50 Hz, 380 V, 3-phase Stock number: 2002452BXA

Condition: excellent (used), Year of construction: 2017, Vacuum lifter from Schmalz for heavy panels with new suction cup rubber. Load capacity 150 kg horizontally and vertically. Suction cup can be motor-pivoted 90 degrees. Suction box 1000 x 675 mm. Acoustic warning signal if vacuum is too low. 400 V, 1.5 kW. Bwjbev S Synovqu Dasl Can be attached to an on-site chain hoist. CE mark. No inspection booklet available. Suction cup rubber replaced. As good as new. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See "Other offers from this supplier."

Year of construction: 2007, Condition: used, Extra-flat lifting table Load capacity 1250kg 2 units available Bwebvquswfh Tce Dael 380V

Condition: good (used), Automatic board stacker for use after a moulder, resaw, crosscut, double end tenoner etc. Pack size up to 6,5m x 1,2m x 1,2m high. Bobvjr E A Eujqu Daewl Capable of stacking 10 layers per minute.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam Bobvswbp Nwoqu Dajwl No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Year of construction: 2001, Condition: good (used), Functionality: fully functional, Pinomatic cross conveyor for a planing and sawing line Year of manufacture: 2001 Manufacturer: Pinomatic OY Type: POS 9+10 Bwebvquev S Hfxj Daol S/N: P1033 Motor-driven cross conveyor with 7 chain hoists Arm length: 6000mm Cross conveyor width: up to 4000mm (adjustable) Height: 900mm 6 fixed chain hoists 1 adjustable chain hoist Voltage: 230/400VAC

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 031001-1, 3 Sicko STM 80 stacking units Bwjbvqsumxb Rsu Dael Data see photos (data sheet) If you have any questions, please contact Mr. Klaus Schmidt by telephone only.

Year of construction: 2024, Condition: as good as new (ex-display), Weinig Stacker for long boards Min length 1500mm Max Length 6000mm Machine is under total rebuilding and will be like new. All hydraulic Systems are changed to Electric motors New control panel sand blasted and repainted. Bwebveunaw Nequ Daol Machine comes with brick stacking option Work in progress New photos as i get along.

Condition: used, Automatic stacker Motorized feed rollers Bwjbvqu Dswfh Rzsael Coin counter 380V

Condition: like new (used), Year of construction: 1999, Functionality: fully functional, input voltage: 400 V, frequency: 50 Hz, LITTLE BUFFER TABLE PERFECT CONDITION (Can be converted for other side) Option Conveyor belt 4m Bebvowcp Ehoqu Dajwl

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Bobvqot Ty A Aju Daowl Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: ready for operation (used), Tilt destacking for layer separation Stacking lath separator with conveyor belt Layer transport to the layer buffer Layer buffer with separation before feeding unit Layer patterns for the two separated timbers including transfer belts, for example to the stacking machine Bwsbouzht Tevqu Daol

Condition: good (used), Lenght with arm at 0 point 0 - 3400 mm Lenght with arm max opened - 4100 mm Bjbvquev Nzgls Daewl Width 1400 mm Weight 1000 kg

Condition: used, Year of construction: 2010, machine/vehicle number: 13820, - Manufacturer MAKOR - Type. CSRT, Loader - Year of construction 2010 - Max. Part width 180 mm - Min. part length ~ 1,000 mm - Max. Part length ~ 6.500 mm - Length of the longitudinal conveyors ~ 6500 mm - Distance between the lifting rakes centre - centre 400/530/700/770/1150/1270 mm - Length ~ 6.500 mm - Weight 750 kg Bwsbvqoumvtwou Dael - Incl. control unit - In stock in Blomberg

Condition: new, Year of construction: 2025, Functionality: fully functional, Form a layer from boards for stacking, putting layers on other, and form a pack, with/or without sticks. Size of pack - 1200x1200x2000-6000. Size of boards - L 2000 – 6000 mm, T14 – 100 mm, W 50 - 270 mm Packing speed max - 14 row/min. Lifting capacity max 5,5 tons NORD electric motor for chain drive 0,75 kW, 400 V, 50 Hz, with brake, for board separator NORD electric motor 1,5 kW, 400 V, 50 Hz, with brake, for lift NORD electric motor 5,5 kW, 400 V, 50 Hz, with brake. Dimensions of equipment – H 1850, W 3200, Total lenght 5350. The price includes equipment with engines and pneumatics. It is possible to install different electric motors with other speeds, as desired and needed by the customer. (Additional costs may be applied) The price does not include electricity installation and automation, delivery and setting up. The offered equipment packs without sticks. We can also offer optional installation of this equipment (if necessary) – Sticker cassettes (sticker size is customizable), price for one “cassette” – from EUR 1900,00/pcs. If the customer needs the sticker cassettes, then the additional cost is the installation of the frame - EUR 900,00. Bwobjv Dh Npjvqu Daol We are using following elements in producing line: 1. NORD motors and reducers 2. Pneimatic components FESTO 3. Equipment is manufactures according to directive 2006/42/EB concerning the CE marking, and will be supplied with the statutory A/B declarations.

Year of construction: 2017, Condition: excellent (used), Return System for panels durable...customized...space-saving...low maintenance The intelligent solution for returning the panels around the edge banding of all manufacturers Working fild L 9 500 mm. x W 6 500 mm.. Functions: Workpiece recirculation Rotation 0° - 90° - 180° Parts measurement Destacking function incl. stacking building (only Return 02) Manual mode for oversize-panels Parts dimension Largest part 4100 x 1300 mm Smallest part 300 x 80 mm. Load max 150 KG *The surface must be smooth, closed, impermeable and without cutouts! Energy supply Electricity 400V / 20 Amps. Pressure air 300 - 420 NL/min System properties Stacking height 800 mm. Movement speed up to 120 m/min Cycle time - max. 8 cycles/min; transport from removal station to return belt lower cycle times in case of destacking. 3-axis manipulator for part transport with vacuum cycle time: 8 - 15 seconds depending on travel distance pick up with suction pads - max. 150kg movings: turning 0° - 90° - 180° pick up of parts and delivery on belt conveyors or roller conveyors stacking possible colour: RAL 7035 portal lenght 9,5 m steel construction to support bridge, incl. Steel posts and crane runway, energy supply via energy chain and installation material Bwobvqu Djv Raggoajl Cgs2Kb3Bqi portal width 6,5 m bridge made of aluminium profile, with double sided tooth belt drive, master/slave control incl. Energy supply via energy chain. Made by Barbaric Made in Austria The company has now changed the lay-out therefore this Barbaric stacker is not needed any longer. The machine can be inspected at any time here in Norway. New price in 2017 was 198 000 euro. Now only 30 000 euro. Excellent condition. Request more information DOCUMENTS 17776136.docx (Word)

Condition: excellent (used), TURNING DEVICE FOR PANELS (FROM CROSSWISE TO LENGTHWISE) Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from cross sense (cross-wise) to longitudinal sense (length-wise) Built-in electric and command panel 1st Table (crosswise) with motorized rollers Bsbsfi Tmtsvqu Dajwl Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (lengthwise) with motorized rollers Min dimensions of the panels (mm) 250 x 320 (ca.) Max dimensions of the panels (mm) 1300 x 2100 (ca.) Min/Max thickness of the panels mm 10 / 50 (ca.) Total installed motor power Kw 3,5 (ca.) Total length of the machine mm 3300

Condition: new, Year of construction: 2025, Automatic stacker with hydraulic lifting, ultra-high performance and super reliable, precision, safety, versatility. Bebvjv Hp Tnsqu Dajwl

Condition: used, Year of construction: 2013, Angle transfer 180°, manufacturer Venjakob VEN TRANS Technical data:- Type. VEN TRANS - Manufacturer: Venjakob - Year of construction:2013 - Max. part length: 5.500mm (part length 6,000mm on request) - Infeed roller conveyor Length: 6100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Infinitely variable feed rate - Cross transfer with carriage and lifting rake - Lifting-lowering, pneumatic - Length of transfer arms: 4600 mm - Number of rakes: 43 pieces - Distance between the rakes 140 mm - Outfeed roller conveyor Length: 6,100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Feed infinitely variable - Connected loads: - Electrical: 400 V, 50 Hz, 3 phases Bwjbvqu Douu Shysael - Location: At the warehouse in D-32825 Blomberg

Condition: new, Year of construction: 2025, Functionality: fully functional, Strapping system solution for mini bundles/packages. Can be integrated into exsisting line. Suitable for boards of different quality, length, width. We can offer individual solutions to manufacture and install a whole line with infeed/outfeed from strapping system. Bwobvqsvz T D Teu Dajl

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Bjbvqu Dsfi Trieaswl Built-in electric cabinet and command panel Total installed motor power KW 3,5 (ca.) 1st table (longitudinal) with motorized rollers Motorized turning device, with double cone (1 top + 1 bottom) 2nd table (cross) with motorized rollers Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 2100 (ca.) Min/Max thickness of the panel mm 10 / 50 (ca.) Total length mm 5680

Condition: excellent (used), DOUBLE LOADER, (DOUBLE CAGE) CE mark Composed of 2 single loaders (one at right and the other at left of the central rollers table) - Motorized rollers table (between the two single loaders) - Built-in electric cabinet and PLC command panel - Total installed power KW 16 General features of each loader: - Vacuum system - Top holding bars deplacement of 180° (horizontal sliding movement) - Horizontal bars for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (metal grid door) Working capacity (cycles/minute) 15 ca. Workpieces thickness (min/max) mm 12 - 60 Minimal workpieces dimensions mm 240 x 240 Maximal workpieces dimensions mm 1200 x 3000 Bebjbgcggjvqu Dajwl Total installed powe Kw 16 x 2

Condition: like new (used), Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) Bobvoc Ux Tmsqu Daswl To turn at 90° the panels (workpieces) from cross sense (crosswise) to longitudinal sense (lenghtwise) Separate electric and command panel (unique with QZ0170A) 1st Table (cross) with motorized rollers (mm 2200 x 1850 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 4800 (ca.)

Condition: like new (used), Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Separate electric and command panel Bwsbvsc Ux Tlequ Dajl 1st Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers (mm 2200 x 2550 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 5500

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Bwobed Siydjvqu Dael Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3