Used Complete Offers for sale (26,294)

Condition: excellent (used), Automatic molding for plates and/or salad bowls with drying tank and complete with various accessories. Brand: JOB FORNI Dkedpfx Afev Upkcspeh

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dsdpfxoycfw Ej Afpekh Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Condition: excellent (used), functionality: fully functional, Complete hydraulic feed unit for EWD Esterer creel type HDE. Very well maintained. Infinitely variable from 0 - 12m / min. Dkjdpfx Afsrrxtpepoh

Condition: excellent (used), functionality: fully functional, Complete Industrial Ammonia Refrigeration System (R717) A complete refrigeration system based on ammonia (R717) refrigerant, designed for industrial applications in food processing plants, cold stores, freezing facilities, and high-performance process installations. The installation includes compressor units, pressure vessels, heat exchangers, circulation pumps, and control panels. Main system components: Ammonia separator vessel Manufacturer: Retech Refrigeration Technologies A/S Type: PSH-0820 Number: 346601 Year of manufacture: 1994 Capacity: 1,092 l Design pressure: -1 / +22 bar Test pressure: 29 bar Refrigerant: R717 Equipment: 2 ammonia pumps Dimensions: 2,700 × 1,300 × 2,400 mm Condenser / Heat exchanger (Shell & Tube Condenser) Manufacturer: Sabroe Refrigeration Type: COSB 411904 Year of manufacture: 1994 Refrigerant: R717 Capacity: 134 / 61.9 l Dimensions: 2,500 × 800 × 2,300 mm Pressure vessel Manufacturer: Tortmans Capacity: 80 l Refrigerant: R717 Dimensions: 1,300 × 500 × 1,400 mm Intermediate cooler Manufacturer: Sabroe Refrigeration Type: DVEA 051411 Serial number: 92578 Year of manufacture: 1994 Max. working pressure: 26 bar Capacity: 340 / 10 l Refrigerant: R717 Dimensions: 1,000 × 800 × 2,300 mm Compressor unit (Sabroe skid): 2 × single-stage reciprocating compressor Sabroe Type: CMO 28 Serial numbers: 99008 / 99007 Year of manufacture: 1994 Capacity: 2 × 190 m³/h Pressure: 20 bar Refrigerant: R717 Sabroe separator Type: GHEA 0520 Serial number: 92419 Year of manufacture: 1994 Capacity: 600 l Alfa Laval heat exchangers: • M10-BWFDT – 37.2 l (year 1993) • M10-BWFGT – 67.4 l (year 1994) Overall skid dimensions: 3,700 × 2,500 × 2,050 mm Additional heat exchanger: Manufacturer: Alfa Laval Type: M10-BWFD Factory number: 30101-12952 Year of manufacture: 1995 Capacity: 104.0 l Design pressure: 25 bar Design temperature: 110°C Dimensions: 1,700 × 500 × 1,000 mm Dksdpfx Afoydqpvspeh Grundfos circulation pumps (set): LP 80-125/124 – 50 m³/h (several units) LP 100-125/130 – 85 m³/h (2 units) LP 65-125/117 – 42 m³/h UPS 50-120 F – 3 × 400–415 V, 50 Hz Two-stage compressor: Manufacturer: Sabroe Refrigeration Type: TSMC 108 L Serial number: 99112 Year of manufacture: 1994 Refrigerant: R717 Capacity: LP – 276 m³/h Pressure: 18 bar Dimensions: 2,200 × 1,100 × 1,550 mm Control panels (3 units): 2 × panel with Siemens touchscreen – 1,200 × 500 × 2,200 mm Sabroe ammonia plant control cabinet – 2,000 × 500 × 2,300 mm Auxiliary cabinet – 800 × 300 × 800 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: Wood-Mizer WB2000 Bandsaw (Year of manufacture: 2020) Offered for sale is a Wood-Mizer WB2000 from 2020, which has only been in operation since 2021. The machine has been regularly maintained, used very little, and is in excellent technical condition. Technical specifications: powerful 30 kW electric motor Log diameter up to approx. 1 m Cutting width up to about 90 cm Load capacity approx. 6 tons Suitable for 90–100 mm wide band saw blades Equipment (included): complete loading/infeed conveyor outfeed table with three-way material distribution (left / right / straight ahead) Camera system for cut monitoring PRO operator panel with touchscreen Dkjdpeyha Ipefx Afpjh retrofitted quick-clamping system The machine can be inspected and tested on site; everything works perfectly.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical data: - Capacity: 32,000 bph on 1.5L - Formats: 1500 ml - Filling product: Water and Non-carbonated drinks - Blowing/Filling/Capping: COMBI - Closure system: 26.7 mm plastic screw caps Equipment includes: Preform hopper – M. Tanner AG / Prologic Cap hopper – Gassner Preform orientator – M. Tanner AG Blow moulder – Krones Contiform S20 Filler – Krones Volumetric Nitrogen doser – Cryotech International Capper – Krones Bottle inspector – Krones Checkmat Bottle conveyors – Krones SynCo Labeller – Krones Etima Coder – Markem SmartLase C350 Shrink-wrapper – Ocme Vega N70/2 Handle applicator – Comag/Decimo HM 100/2 Pack conveyors – Europool Dodjxxbl Nopfx Afpekh Palletiser – Ocme Pegasus M400 Pallet wrapper – Bema Silkworm Turbo Pallet label printer/applicator – Bancale Eidos 7P6ERL

Condition: like new (used), Year of construction: 2018, operating hours: 14,000 h, functionality: fully functional, Technical data: - Capacity: 54,000 bph on 250 ml - Formats: 250 ml / 500 ml / 1,000 ml / 1,500 ml - Filling product: Water and non-carbonated beverages - Blowing/Filling/Capping: COMBI - Closure system: 26.7 mm plastic screw caps Equipment included: - Krones Preform Contifeed Orienter Feeder - Krones 24-cavity Blow Molder, model Contiform 324 Pro - High pressure air compressors, low pressure and high pressure booster - Krones 88-valve Volumetric Bottle Filler, Modufill PET with 33-head capper set for 26.7 mm - Krones model Capcade, cap hopper – cap feeder for flat caps - Fogg model 756-5-5-12-U-19, cap hopper – cap feeder for sports caps - Krones Checkmat Inspection System - Krones Linadry Air Knife System - Two (2) Krones Contiroll 8100 Hot Glue Wrap-Around Roll Feed Labelers - Two (2) Krones Checkmat Inspection Systems, post-label - Markem-Imaje Coder SLC350 - Krones stainless full-bottle conveyor and controls - Krones full case conveyor from packer discharge to palletizer infeed - Krones Robobox Case Orienter Dodpfx Afsxvda Dopekh - Krones Modulpal Case Palletiser - Krones Palco full pallet discharge roller conveyor from palletizer to wrapper - Wulftec pallet wrapper with infeed and discharge pallet conveyor, model WCRT-200 - Ingersoll-Rand low pressure compressor (plant air), model IRN100N-OF (VSD) - Ingersoll-Rand low pressure receiver tank and air dryer - Atlas-Copco low pressure model ZR315VSDFF (paired with HPC-001) - Atlas-Copco high pressure air compressor booster - Manchester high pressure receiver, model 303724–600 gal *All equipment has already been dismantled and was serviced by Krones technicians The line is ready for shipment Installation and commissioning can be included in the offer

Condition: new, HORIZONTAL BAND SAWING MACHINE A 1200 BIG 150 Successor of A-1200 PLUS In addition to the functionality of its predecessor, the A 1200 BIG 150 is significantly larger, which results in increased performance. It is used for longitudinal cutting of wood in the form of beams, square timbers and planks. Thanks to its design, it can be operated by one person, which is now a valuable advantage of every industrial machine. Fittings: Length of the log cut: individually to the needs of the recipient Diameter of the processed log: 1500 mm Guide wheel of the bandsaw: 600 mm Band saw: length: 61500 mm Width: 40-50 mm Main engine: 15 kW Electric lifting up / down Smooth feedrate control Hydraulic tension of the saw Average efficiency: 1-1.5m3 / hour (Depending on the size of the log) In addition, the A 1200 BIG 150 can be equipped with: increasing power to 18.5kW or 22kW electrically moving roller bark cutter SELBIT ISP-10 microprocessor cutting thickness controller operator seat stationary desktop plank discharge bed extension Hydraulics: Hydraulically raised retaining arms loading of the log leveling holdfast chain rotator leveling with hydraulic drive Dedpfx Asu Sg A Ujfpekh hydraulic aggregate 5.5kW

Condition: new, ✔ Band sawmills ✔ Multi saws ✔ Edge cutters ✔ Milling machines for pallet boards ✔ Wood cutters Why Boldrew? ✅ Over 30 years of experience in the industry ✅ Professionalism and precision ✅ Customer service in Europe, America and Africa We invite you to cooperate! Mobile band sawmill TS-1200 H Mobile band sawmill TS-1200 H Innovative technology for woodworking professionals The mobile band sawmill TS-1200 H is a technologically advanced machine designed for efficiency, precision and reliability. Thanks to its mobility and modern hydraulic solutions, the machine will meet the expectations of even the most demanding users. --- Technical data ·Length of the cut log: 100–820 cm Track bed: 6 meters, with an additional 4 meter long hydraulically folding segment ·Diameter of the processed log: up to 950 mm ·Band saw guide wheels: Ø 600 mm Band saw: ·Length: 4800 mm ·Width: 40-50 mm ·Main engine: Briggs & Stratton Vanguard V-Twin 35 HP combustion engine ·Generator: 8 kW to power additional components Dkjdpjvvw R Tefx Afpsh ·Head lifting system: Double-sided chain drive 16 B ·Feed control: Stepless adjustment for maximum control ·Saw tension: Hydraulic ·Debarker for the first log preparation ·ISP 10 cutting thickness gauge ·Electrically operated roller ·Adjustable Angle supports (load capacity 600 kg each) ·LED lighting, ideal for working in different conditions --- Advanced hydraulic kit The efficient hydraulic system allows easy and quick handling of the logs: ·Hydraulic support arms - stabilization of the log during cutting Log loading - 2 individual cylinders for operator comfort ·Wood leveling - 2 adjustment points ·Log pressure - 2 points for precise clamping ·Chain turner - 2 points, facilitates handling of the log ·Hydraulic motor: 8 kW Briggs & Stratton combustion engine with efficient hydraulic pump Mobility and durability Mobile axle: Double ALKO with brake and height-adjustable drawbar Construction: Solid and resistant to difficult working conditions Transport: Easy thanks to mobile chassis and compact dimensions Advantages of Trak A-1200 M 1. Versatility: Ability to cut large logs with different diameters and lengths 2. Mobility: Perfect for working in sawmills and directly in the field 3. Efficiency: Fast and precise cutting thanks to modern hydraulic systems 4. Operator comfort: Intuitive controls and ergonomic solutions

Condition: like new (used), functionality: fully functional, power: 110 kW (149.56 HP), Complete Refurbished Amandus Kahl C35-780 Pellet Press. The C35-780 pellet press itself has been recently refurbished with a full documentation of the all the new parts available, with one of them included in the pictures. The pellet press has been refurbished in 2024. The production line includes: - Amandus Kahl C35-780 Pellet Press with hydraulic nut Dodexykzpepfx Afpokh - The Pellet Press has a new 110 KW engine - Electrical cabinet with emergency stop including complete electrical documentation - 4 additional die's of 6 mm - 60 liters of extra synthetic oil List of refurbished parts: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oilfilter - 1 new oil pump - 20 liters of 800/460 Syntethic Oil - 1 New Pressure Piece Main Shaft

Condition: ready for operation (used), functionality: fully functional, Fully equipped plastic processing line, including: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, mounted on a support column. The line consists of several components. Dkodpfjyc R U Asx Afpsh - Suitable for co-extrusion applications – e.g., multi-layer profiles, strips, technical components TECHNICAL DATA – BA92 Extruder (NOVEL) - Screw: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm - Barrel: 34CrAlNi7 steel, hardness 1000 HV - Gearbox: ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 - Cooling zones: 4 - Motor: 63.8 kW, DC, 210–2100 rpm - Venting: 2.2 kW pump, 36 m³/h, vacuum 700 Hg - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder - Screw: Ø1¾", length 21D, compression ratio 2:1, twin-flighted - Barrel material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt 1:1.65 (total ratio 1:27) - Drive belt: type 3VX560, 3 pcs. - Thrust bearing: load capacity 20,000 kg - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Condition: complete, fully operational line, ready for operation Application: plastic processing in co-extrusion processes Technical documentation available upon request. Includes additional spare parts.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, The line includes: Dkjdpfx Afoyc Rtxjpoh - Main extruder: BA130 (Cobra), year of manufacture 2008 - Co-extruder: CM65, year of manufacture 2008, sold for parts - Embosser, cooling tank, nailer, puller, perforator, guillotine – all year of manufacture 1996 TECHNICAL DATA – BA130 Extruder (Cobra) - Main screw: Ø130 mm, length 26 L/D - Center distance: 1050 mm - Screw material: XALOY 41CrAlMo7, hardness 1000 HV - Gearbox: 1:31:7 R - Thrust bearing: 2 020 000 N - Barrel heaters: 74.6 kW (7 heating zones, 6 cooling zones) - Main motor: 205 kW, 1460 rpm - Degassing: pump 4 kW, 100 m³/h, vacuum 700 Hg - Feeders: 2x motor 2.2 kW, ratio 1:25:4 R, screw speed 112 rpm Technical condition: The line is operational and ready for production The configuration allows for the complete siding production process – from granulate to finished profile Individual price quotation and on-site machine demonstration available.

Condition: used, axle configuration: 2 axles, first registration: 02/2011, loading space length: 10,500 mm, loading space width: 2,490 mm, loading space height: 2,670 mm, total length: 11,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 6,720 mm, color: other, Year of construction: 2011, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift - Central lubrication = Notes = Number of axles: 2, Payload: 24,680 kg, Curb weight: 8,320 kg, Gross weight: 33,000 kg, Kingpin size: 2 inch, Central lubrication, Suspension type: full air suspension, ABS, EBS, Body year: 2011, Axle type: BPW, Tail lift = Further Information = General information Cab: Day cab Registration number: OL-06-GS Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: lift axle; tyre tread left: 6 mm; tyre tread right: 4 mm Axle 2: lift axle; tyre tread left: 6 mm; tyre tread right: 4 mm Weights Unladen weight: 8,320 kg Load capacity: 24,680 kg Gross vehicle weight (GVW): 33,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European makes, years of manufacture, and price ranges. Why buy at Kleyn Trucks? Simple! Dkedpfow Da A Tox Afpoh • Large and fast-changing inventory • Recognizable quality • Competitive prices • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates quickly arranged • Expert technical services • The assurance of “recognizable quality” • And more ... Visit our website for special offers and the full stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and request a quote on our website. Ask us directly about our European warranty package.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 10,100 h, functionality: fully functional, type of input current: three-phase, cutting length (max.): 8,000 mm, overall weight: 19,500 kg, cutting height (max.): 800 mm, input current: 250 A, input voltage: 400 V, saw blade width: 500 mm, main saw diameter: 500 mm, Equipment: cabin, centralized greasing system, scorer, - Log circular saw, fully functional - max. log diameter 800 mm, max. length 6 m, individual pieces up to 8 m - max. timber size 180/180 mm, in wide board mode 310/180 mm - automatic timber sorting Dkjdpfx Ajyc Ncrsfpsh - price includes log feeder, 2x outfeed conveyors, and 1x sorting conveyor

Condition: refurbished (used), BANDSAW HEADRING Mod. 1300/SG-CFC - Cast iron structure with stabilizing treatment. -right hand design (cutt from right to left!) - Flywheel diameter 1300 mm. - Flywheel width 165 mm for maximum blade width of 180 mm. -Filled flywheels with special ribs to enhance mechanical characteristics, subjected to stabilizing treatment; shaped with double curve for the best stability on the table; perpendicular to the rotation of axis. - 55kW (75 HP) main engine, automatic star-delta starter, pulley, belts and brakes -chains for timber unload HYDRAULIC CARRIAGE CFC - 4 clamps for log centering - Maximum distance from blade to clamp 1000 mm. -Max opening of hooks 900 mm - COMPUTERIZED-Mudata control system Dkodpfexzth Iex Afpoh - Continuously variable speed feed from 0 - 140 ml/min and exploits the power of the main motor to obtain a quality cut, hydrostatic design -4 turning logs chain systems - Control unit and seat, multi-function joystick and electric servo control !!!!! OPTIONAL !!!!! INSTALLATION..... 40,000 EUR EXCLUDING VAT, FOR A 1-YEAR WARRANTY Mechanization and unloading rollers Log ramp, length 4 m - 20,000 EUR + VAT Log loading arms on the log saw trolley, hydraulically operated with a single cylinder - 20,000 EUR + VAT Roller conveyor - EUR 20,000 + VAT - Length 7.60 m - Width 1.1 m - Rollers Ø 215 mm - Gear motor Second unloading roller conveyor - EUR 20,000 + VAT - Length 7.2 m - Width 1080 mm - Rollers 840 mm - Left/right chains - Own motorization These options significantly increase production flow, reduce downtime, and automate the log exit area. Advantages for industrial production - Complete line, fully reconditioned in 2025 - Excellent cutting stability thanks to cast iron construction - Extremely precise positioning with BRUSHLESS servo motors - High productivity and minimal maintenance - Ideal solution for factories wishing to modernize their cutting flow without investing in new equipment

Condition: like new (used), Year of construction: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EGDE COMPLETE LINE INCLUDES: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE FILLER V200, YOM 2010 15.120 RUNNING HOURS CAPACITY 9.000 CARTONS PER HOUR 2. TETRA PAK ACHX 10-0400-44 HELIX CARTON ACCUMULATOR V400, YOM 2010, 17.431 RUNNING HOURS 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM APGRATED V300, YOM 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, YOM 2010, 10.914 RUNNING HOURS 5. TETRA PAK FILM WRAPPER 32 V400, YOM 2010, NEVER USED, ONLY 45 HOURS! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, YOM 2010 WRAP AROUND 7. TETRA PAK LINE CONTROLLER LC30+ 8. CONVEYORS SYSTEM 9. INC PRINTER VIDEOJET 1620 THE LINE IS IN AS NEW CONDITION. LOCATION - SWEDEN. READY FOR DISMANTLING AND SHIPPING IMMEDIATELY. PRICE UNDER REQUEST Dsdpfxoya Nf Ij Afpokh

Condition: new, Year of construction: 2024, WRAVOR Horizontal bandsaws WRC 1050,1150,1225,1250,1550,2000 Dkedpfx Afjtpwgxopeh edgers, multirip saws, mechanization etc. We are your contact for the company Wravor in Germany. We are happy to offer you the right machines.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, Söderhamn Eriksson Band Sawline 3 quad saw grups included reducers, 120 mm – 500 mm small end diameter, to 550 mm large end diameter, with length 2.4 - 5.5(6.2) m. Feeding speed of the sawing line can be adjusted from 25 m/min to 90 m/min. - Top diameter: 120–500 mm - Maximum log diameter: 550 mm - Cant width in Chipper Canter 1: 75(82)–410 mm - Cant width in Chipper Canter 2: 75(82)–410 mm - Saw kerf: 2.7–3.2 mm - Chip length: 20–30 mm Sawline: 1) Log infeed Dkodpfoyag T Njx Afpeh 2) Butt-end reducer 1200mm 3) Debarker Cambio 850 (six tools) 4) 3D log sacnner (rema logbark) 5) Automatic log turner 6) Customill sawgrup 1 included reducer (4 bands) 7) Bord separator (first sawgrup) 8) Reducer 2 Söderhamn/Kocum 240-12 9) Customill sawgrup 2 (4 bands) 10) Bord separator (second sawgrup) 11) Customill sawgrup 3 (4 bands) 12) Edger line 1 Söderhamn Edgar 5200 (up to 35 pcs/min) 13) Edger line 2 Catech/Arivislanda (up to 40 pcs/min) 14) Gunnarssons combisorting line 40 pins (trimming 3 dm stepps) 15) Renholmen stacker W=1,6mH=1,6-1,8mL=5.6m 16) Automatic stick layer system of stick placers (25x50x1630) Waste handling conveyors electric and control system, hydraulic systems included.

Condition: excellent (used), functionality: fully functional, 2 units DEMAG trolleys, 3.2 t, complete with hoist PLV168 Very good condition, ready for immediate use 1 unit for €3,300.00 net 2 units for €6,200.00 net DEMAG slip ring motor 36/24 S4 GÜ Fine gear FG36 19K or Fine gear 72 DFg refurbished or Hoisting motor 36/24 K6P 24/14 K4P 24/10 K4P Djdpfjwafidox Afpokh Info: 20,000 DEMAG spare parts and components in stock! demag parts warehouse

Condition: excellent (used), Year of construction: 2021, Year of construction: 2021/2022 Space requirement for entire system: 10x32 meters Total connected load: approx. 350 kW Peak value: approx. 120 kW Average value: approx. 90 kW Personnel requirement: min. 2 people Cutting capacity: maximum 80-100 fm/8h Round log diameter: min. 10cm max. 100cm Round log lengths: min. 100cm max. 600cm Edging system: 3-stack variable / 120mm cutting height Due to a restructuring of the company, a new, complete band sawmill is for sale as follows: - Round log feeder - Block puller Djdpfxjvw Ry Ds Afpskh - Balz debarking machine BG 90 6W-GR - Steep conveyor with feeder - Tension carriage ELCA Legno CRO 17 - Band saw ELCA Legno SNI 14 - Conveyor belt - Trimming machine Möhringer 323 001 12 - Stacking system M-TEC - Disposal line / chipping system ZENO ZTI 600/520/160

Condition: good (used), functionality: fully functional, lifting height: 10 mm, load capacity: 25,000 kg, DEMAG double-rail trolley with hoist P1600 Load capacity 25,000kg / 25 t Hoist motor 36/20 K6P Djdpfjv Uvftex Afpokh Fine adjustment FG 36 20 hoists available for sale Trolley travel 2-stage Fully functional Far below manufacturer's new price

Condition: good (used), Complete restacking system Wood lengths: 3–5 m Wood thicknesses: 17–140 mm Wood widths: 75–300 mm Performance: 60–80 boards/minute Cross conveyor Tipping table Singulation Alignment Sorting facility Stacking Without stick magazines Cross conveyor Complete electrical system/control Siemens S7 (Alfha) Dkedjyfb Hbopfx Afpsh

Condition: used, Complete Factory Package for Processing PVC and Aluminium Profiles – Block Sale Includes the following machinery: 1️⃣ Welding and Cleaning Line – ProfteQ QUADOS Including: 4-head welding machine QUAD OS12 + transfer/cooling table + CNC corner cleaning machine FRT9 + automatic loading table 2️⃣ Machining Center – Mecal MC 304 Atlas 4-axis machine equipped with a head for frontal machining, specifically designed for aluminum processing. 3️⃣ Double-head cutting-off machine – FOM ALVA 500A – year 2005 Blade: Ø 500 mm – Blade inclination: external 4️⃣ Cold Saw – ALTECH GOTHA (complete with roller conveyors) Single-head ascending blade saw Ø 600 mm, blade tilting -45° / +45°, blade rotation with digital angle display. 5️⃣ Glazing Bead Cutting Machine – RobTech MAESTRO Dodpfxov Ig Hhj Afpekh Designed for cutting aluminium and PVC glazing bead profiles with four blades positioned at 45°. 6️⃣ Single-head cutting-off machine – MG TLG 350 Blade Ø 350 mm – Table rotation: 45° - 0° - 90° 7️⃣ Two-Head Drilling Machine – FOM 8️⃣ Vertical Assembly Bench for Glass and Glazing Beads – ProfteQ BV7 + Bench – Rotox VPAH 3023 9️⃣ Assembly Table – FOM 🔟 Double-Sided Cantilever Rack – 1 Block (9 Shelves per Side) (Multiple units available). 11️⃣ Electric Forklift – Career R30N S (4 wheels) Capacity: 3,000 kg, complete with side-shift. 12️⃣ Electric Order Picker – OM XOp Capacity 1,200 kg, lifting height 6,725 mm, fork length 800 mm.

Condition: used, PRODUCTION OF: ➢ Single-portion shortbread biscuits in 2x2 or 3x2 formats, subsequently packed in tray + flowpack ➢ Crunchy cereal and cocoa biscuit snacks Dksdpsyc Ngdsfx Afpjh ➢ Cracker sandwiches filled with cream cheese 1. PROCESSING LINE COMPONENTS consisting of: - IMAFORNI disc greasing machine - No. 2 EUROINOX chocolate storage silos with related piping - Mobile mixer - SOLLICH extruder / filling machine - LICO dosing units - No. 4 AZO mobile tanks - SHERPA elevator - TECNOFOOD mixers - OPM ultrasonic cutter (currently out of use) - FANTINI tilting conveyors, aligners and overhead by-pass Including aerial conveyor (excluding M3) - FPE capping machine with related 3-flavour cream feeding system Includes: - Transfer belts - Alignment - Biscuit preparation - Filling (with dosing heads) - Individual outfeed conveyors 2. COMPLETE PACKAGING LINE: - No. 1 distributing system with row phasing unit, single-pack feeding lines and accumulation buffer - No. 3 TECNO PACK single-pack packaging machines (including final distributor) - No. 3 LIVETECH tray loaders (year 2019) - No. 2 JOINTECH multipack machines (accessories excluded) - No. 3 RAMA tray forming machines - No. 1 OPM case packer (LIVETECH retrofit) - No. 1 OPM carton opener (LIVETECH retrofit) - No. 1 OPM glue carton sealer (LIVETECH retrofit) CONTACT US TO RECEIVE THE COMPLETE BROCHURE AND PRICING INFORMATION. LIMITED AVAILABILITY, ONLY FOR A FEW DAYS.

Condition: used, Complete Corrugator width 2500: 3 single facer MITSUBISHI 50C (onda C,B,E) 7 Mill Roll Stand liner Martin 7 Splicer Liner Marquip 1 Mill Roll Stand liner Agnati year 2004 Dodpfx Afjycgazjpskh Gluer Peters year 1994 HOT PLATES Martin HI-Trac II Rotary Shear Agnati HRS 90 year 2003 Slitter Scorer Agnati Power Set year 2003 Cutt off Agnati TR/EL 90 year 2003 Stacker New Enginering