Used Complete for sale (13,194)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, Vertical log bandsawline Primultini with side chippercanter, from 2016, max log length 7,2 m, diam 20-100 cm Vertical log bandsaw Primultini 1400SHF-CEI Chipper canter Primultini WSF Saw Path cleaning machine Multiripsaw Paul KME3-1012-L Redpfez N Tdwsx Airjch Loginfeed and conveyors between machines Operating Electronics Line stands under power and can be started-up for demo without logs

Condition: like new (used), Year of construction: 2024, operating hours: 490 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, COMPLETE MINERAL MASTERBATCH PRODUCTION LINE – PELLETIZING PROCESS High-concentration mineral masterbatch • Turnkey industrial installation • Spain ASKING PRICE: XX.XXX + VAT | COMPLETE LINE ONLY A complete production solution Complete industrial installation designed for the production of highly concentrated mineral masterbatch. The line integrates raw material handling, weighing/dosing, high-speed mixing, conveying, pelletizing, screening, and bagging into a single, coordinated system. The equipment is offered as one complete lot, dismantled and available for relocation. Capacity Rcsdpfxsz Aibas Aireh Approx. 750–850 kg/h* Operating hours Maximum 490 h Mixer 500 L / 300 L usable / 75 kW Pelletizer 350 mm / 37 kW Automation Siemens S7-1200 PLC Power supply Includes 200 kVA Perkins generator Integrated process RAW MATERIAL FEEDING → AUTOMATIC WEIGHING/DOSING → HIGH-SPEED MIXING → TRANSFER → PELLETIZING → SCREENING → BAGGING Why this line is attractive • Complete and integrated: avoids the engineering and integration work involved in sourcing the equipment individually. • Very low operating hours: maximum recorded operating time is 490 h. • Industrial-scale mixing: 500 L mixer with 75 kW drive and variable-speed control. • Automated dosing and control: Siemens S7-1200 PLC architecture with weighing and recipe-management functions. • Relocatable asset: installation is offered dismantled, making it suitable for transfer to another industrial site. *Capacity is an approximate figure based on the installation configuration and intended application; actual throughput depends on formulation, operating conditions, and product specification.

Condition: used, Year of construction: 2021, functionality: fully functional, Sale of complete PVC profile extrusion lines We offer for sale 6 complete technological lines for the production of PVC profiles, originating from an operational production facility. The equipment dates from 2011–2025, with some units having undergone major overhauls. The technological lines include: • twin-screw conical extruder Pol-Service Majcher PSMD 65 / PSMD 65/132, • main motor power: 37 kW, • output: approximately 120 kg/h, • calibration table with 2 vacuum tanks (Pol-Service Majcher, Polreplast or Greiner – depending on the line), • caterpillar haul-off with guillotine (Greiner or Gruber Extrusion), • stacking device, • vibrating station for unloading Big-Bags. Key information • 6 complete technological lines, • main motor power: 37 kW, • output: approximately 120 kg/h, Rjdpszlpabofx Airoch • equipment from reputable manufacturers: Pol-Service Majcher, Greiner, Polreplast, Rawotechnik and Gruber Extrusion, • selected equipment after major overhauls, • available technical documentation and CE documentation for selected machines. Purchase options: • single technological line, • several selected lines, • complete machine park, • the entire facility with all production equipment. The price quoted is for one line. A detailed list of equipment, technical parameters, technical documentation and additional photos are available upon request. Location: Lower Silesian Voivodeship, Poland.

Condition: excellent (used), Year of construction: 2008, For sale complete PVC carpentry production line, brand URBAN, composed of: *1. Welding machine at 2 ends; URBAN brand, model: AKS 5305-FF, serial number: 53372, year of manufacture: 2007, perfect working condition; *2. Channel milling machine; URBAN brand, model: WS 103, serial number: 790, year of manufacture 2007, perfect working condition; *3. 2-headed saw: brand RAPID, model DGS 100, serial number: 004606128, year of manufacture 2010, sold together with vacuum cleaner with bags, perfect working condition; Redeucl Dcepfx Airjch *4. MACC rebar cutting saw, model NEW 275, serial number: 88266, year of manufacture 2008, perfect working condition; *5. Pantograph brand URBAN, model MLA A23 – 100466321S, serial number: 528-0, year of manufacture: 2008, perfect working condition; 6. Upright milling machine: URBAN brand, model M7CRH-100149891, serial number 559, year of manufacture 2008, perfect working condition; *7. De burring machine with 2 groups of cutters; brand URBAN, model SV 280, serial number: 29342, year of manufacture 2008, perfect working condition; *8. Saw for cutting sticks: brand URBAN, model GLS 102; serial number: 102015; year of manufacture 2010, perfect working condition; The production capacity of the line is 30-50 units/8h (depending on the number of people serving the line). The line was used very little from 2010 to 2014, and not at maximum capacity. We can also sell individual machines on request from the line. Net price complete line 33.500 Euro + VAT, negotiable, FCA Oradea.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). Rcedpfxoy Um T Ho Airjh 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Videos available on request.

Condition: excellent (used), Year of construction: 2024, We offer for sale a heavy-duty double-blade angular saw type D9, designed for efficient processing of hardwood logs up to 4 m length. The machine is in very good condition and is supplied as a complete line including clamping wagons, conveyors, sorting system, and operator control cabin. Key Features & Benefits Double-blade angular cutting system (horizontal + vertical saw) Redpszgtfqjfx Airjch Designed for hardwood processing High-performance industrial solution Smoothly adjustable feed speed Complete technology line including conveyors and sorting Includes operator control cabin Energy-saving system with braking energy recovery Technical Specifications Cutting System Saw blades: 2 × 500 mm (horizontal + vertical) Saw head power: 2 × 22 kW Blade speed: approx. 2,900 rpm Max. cutting section (angular): approx. 180 × 180 mm Material Capacity Log diameter: approx. 100 – 800 mm Log length: approx. 2,000 – 4,000 mm Processing line for logs up to 4 m Feeding & Handling 4 clamping wagons, each with clamp and rotator 1 transport wagon with travel motor (approx. 30–32 kW) Adjustable feed speed up to approx. 120 m/min Horizontal compensation of tapering Hydraulic system with lubricated track and wagons Drive & Power Main motors: 2 × 22 kW Saw head feed servo (X axis): approx. 5.5 kW Clamping tower servos (Y axis): 5 × 5.5 kW Travel motor: approx. 30–32 kW Hydraulic unit motors: 5 × 3 kW Total installed power: approx. 135 kW Control & Equipment Operator control panel 2 laser guides Remote access system Measurement of power consumption Hydraulic heating function Electric cabinet heating Conveyors & Line Equipment Infeed system: 2 × infeed conveyors, each 6 m long Heavy-duty 3-chain construction Integrated log handling and transfer system Chip extraction belt conveyor (cutting waste removal) Outfeed system: 1 × single-sided tilting conveyor for waste 2 × sorting conveyors for processed timber (both sides discharge) Sorting System Extraction Requirements Required extraction capacity: min. 8,000 m³/h Connections: 150 mm + 2 × 200 mm Dimensions & Weight Machine length: approx. 36,500 mm Machine width: approx. 3,000 mm Machine height: approx. 3,000 mm Total weight: approx. 13,500 kg Condition & Sale Terms Condition: Very good Fully operational industrial line Sale includes control cabin Dismantling and removal to be arranged by the buyer Advantages Complete production line High productivity for hardwood processing Strong and reliable industrial construction Precise cutting and stable output Efficient handling with integrated conveyors and sorting

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16041309, cutting length (max.): 4,800 mm, cutting height (max.): 1,150 mm, roll diameter: 115 mm, saw drive: 30 W, input current: 56 A, input voltage: 400 V, Equipment: 3rd hydraulic function, WRAVOR WRC 1150 AC BAND SAWMILL FOR SALE Stationary WRAVOR WRC 1150 AC band sawmill with log infeed system. Year of manufacture: 2016 The machine is still in operation and can be inspected while running. Technical specifications: Capacity when processing oak logs, diameter 250–700 mm: approx. 18–20 m³ per 8-hour shift Total installed power: 66 kW Main drive motor: 30 kW 2 debarkers Saw blade dimensions: 140 × 8,190 mm Wheel diameter: 1,150 mm Wheel width: 115 mm Cutting optimization software Rcsdoy Hx I Tepfx Airsh The machine is currently installed and operational. Please contact us for further information, photos, videos, price or to arrange an inspection.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete wood debarking line for pallet production, including a stacking machine, crosscut saw, chipper, edger, and dust extraction system. Year of manufacture: 2021 Technical data: - Max wood diameter: 480 mm - Minimum wood diameter: 120 mm - Minimum wood length: 1500 mm - Max log length: 3000 mm CAPACITY: UP TO 200 m3 PER SHIFT THE DEBARKING LINE CONSISTS OF THE FOLLOWING MACHINES: 1. BRODPOL DEBARKING LINE, which includes: - Log infeed conveyor - Longitudinal conveyor for the saw - Circular saw – 110 and 90 kW motors - Receiving roller table with a mechanism for removing edgings and side boards - Powered roller table - Base table SB 4000 - Multi-blade two-shaft saw WP 210 – 110 and 75 kW motors - Receiving table with board discharge and conveyor to the stacking machine - Lower return conveyor for edgings, side conveyor to the edger, and conveyor belt to the chipper - Sawdust screen 2. LIGNUMA OFZ 300 EDGER AND TRIMMER Year of manufacture: 2023 The machine consists of the following components: - Centering table - Trimmer MN 315 - Separating table SC-2 - Edger OFD 500/K 3. TEKNAMOTOR SKORPION 650 EB/2 CHIPPER with infeed and discharge systems. Rcodpfx Aev Dm T Toiroh 4. COMPLETE DUST EXTRACTION SYSTEM FOR ALL MACHINES.

Condition: used, Year of construction: 1972, functionality: fully functional, type of input current: AC, cutting height (max.): 95 mm, cutting width (max.): 105 mm, control type: manual, actuation type: hydraulic, total height: 2,500 mm, total length: 8,000 mm, total width: 2,300 mm, overall weight: 1,500 kg, Due to the closure of the business, a complete package is for sale, consisting of a very robust stationary band saw (j.Boegli, Ursenbach, Switzerland) including a sharpening device; a multi-blade resaw (Paul, Germany) with bundling equipment; a 58 kW/400 volt generator (Perkins engine/Visa unit), manufactured in 10/1996; a dust extraction system; and an L10 OuK wheel loader. Rcedpfoz Dvtiox Airsh

Condition: used, Year of construction: 2015, operating hours: 19,600 h, functionality: fully functional, fuel type: gas, power: 2,028 kW (2,757.31 HP), output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, =Scope of supply= Complete set of 3 x MTU 16V4000 GS (16V4000L64) with Skid cooling groups Radiators Absorption chiller Genset outgoing breakers Lube oil systems Electrical auixiliaries panels MTU - MCS , MTU - MMC panels =Technical specifications= Time for delivery - in stock Engine type - 16V4000L64 Electrical power - 2028 kW Engine speed - 1500 rpm Total efficiency - 89 % Rcjdpezmnzaefx Airjh Voltage - 400 V Frequency - 50 Hz =Other information= Production country - Germany

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Rcodpfxerl S Ufe Aireh Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: used, No. 3280 Complete painting line / water-wash spray booths Used, system still completely assembled, from a furniture manufacturing company Large complete painting line, consisting of various water-wash spray booths, spraying equipment, extensive roller conveyor system as well as fresh air and exhaust air ducting Several water-wash spray booths / spray walls Spray booths partly designed as 3-sided booths Turntable available Rsdpszhblnsfx Airsch Various spraying units / pumps available Extensive roller conveyors for workpiece transport Fresh air supply / air technology available Exhaust air ducts / extraction system available Lighting above the spray booths available Dimensions of the spray booths approx. 3000 x 2000 mm / 2000 x 2000 mm / 2500 x 2000 mm Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, Year of construction: 2013, Block bandsaw CTR710M, year 2013, 12 m cutting length, incl. LG automatic feeder and scorer, 6 kW, 550 kg Rcsdsxlng Tjpfx Airjh

Condition: used, Year of construction: 2014, Overview Complete 10 hl craft brewery around an Eco Brew Tech 10-20 HL steam-heated two-vessel brewhouse from 2014. One package from milling to bottling: malt mill, brewhouse with wort cooling and oxygenation, hot and cold water tanks, steam generator, three 20 hl unitanks, filtration, an atmospheric filler-capper monoblock, a self-adhesive labeller and a microchiller. 10 hl of cast wort per brew at 12.5 °P, up to 4 brews in 24 hours. Technical data - Brew length: 10 hl cast wort at 12.5 °P; 20 hl in 12 hours, up to 4 x 10 hl per 24 hours - Brewhouse: 2 vessels, AISI 304, steam-heated, PLC with touchscreen and recipe memory - Fermentation: 3 x 20 hl unitanks, AISI 304, 0.49 bar - Bottling: 800-1,000 bottles/h, crown cap - Year: 2014 (microchiller 2018) Scope of Delivery - Malt mill | Robix | ROPPI-1100 | two fluted rollers, adjustable and lockable gap, protective magnets, 1,100 kg/h, 4.8 kW, 400 V / 50 Hz - Brewhouse | Eco Brew Tech | 10-20 HL | mash/lauter tun 1,557 L gross with false bottom, grant, sparging and 1.1 kW bidirectional rake with variable speed; kettle/whirlpool 1,890 L gross with tangential inlet and bottom steam jacket; rock wool insulation, platform and stairs | 2014 - Wort pumps | 2 sanitary pumps for hot and cold wort, 2 kW and 3 kW - Water mixing station | hot and mains water, flow meter and in-line thermometer - Plate heat exchanger | AISI 316 plates, NBR gaskets, wort cooling with hot-water recovery - Wort oxygenation | in-line, porous stone, flow control valve, outlet thermometer - Hot water tank | Eco Brew Tech | HWT | 20 hl working (2,869 L gross), steam jacket, PT100 thermostat, 0.75 kW pump 80 L/min, 24 L expansion vessel | 2014 - Cold water tank | Eco Brew Tech | CWT | 20 hl working (2,869 L gross), glycol jacket, PT100 thermostat, 0.75 kW pump 80 L/min | 2014 - Steam generator | Thermindus | GV INSIEME | 150 kg steam/h, diesel burner, feed-water unit and boiler control panel | 2014 - Unitanks, 3 units | Eco Brew Tech | 20 hl working (2,731 L gross) each, AISI 304, 0.49 bar, 2 independent cooling jackets (side and cone), PT100, pressure gauge, safety valve, CIP spray ball | 2014 - Mixing tank | Eco Brew Tech | 2,200 L, AISI 304 | 2014 - Mobile pump on trolley | 1.5 kW, 200 L/min at approx. 15 m, AISI 316 pump, AISI 304 trolley, for CIP and beer transfer - Cartridge filter | AISI 304 housing, up to 2,000 L/h, cartridges not included - Process pump | EP MINI | 0.37 kW, 3/4" connection - Filler-capper monoblock | Idrotecnica | I8C | atmospheric filling, crown capping, 800-1,000 bottles/h | 2014 - Self-adhesive labeller | STS | S2/Z | automatic, 1,000 bottles/h, batch coder | 2014 - Microchiller | Keyter | KWF2009 | process cooling | 2018 Rsdpfx Aisz Sk Aqersch Condition Used, still installed. Inspection on site is possible. Availability Immediately. Location: Spain.

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Complete Abrasive Belt Production Line for Sale – Excellent Condition (2024) Complete Abrasive Belt Manufacturing Line – Ready for Production We are offering for sale a complete abrasive belt production line, purchased new in April 2024 from iSharp China. The equipment is in excellent working condition, has been professionally maintained, and is available immediately. Equipment included: 1. Cutting to Length Machine – CTB-L/W-1800      Quantity: 1 Maximum cutting width: 1800 mm Cutting angle: ±55° / 90° Pneumatic pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 2. Skiving Machine – SKV-C-N      Quantity: 1 Skiving speed: 30–200 mm/s Pneumatic pressure: 0.7 MPa Installed power: 7 kW Application: abrasive belt joint preparation / skiving 3. Abrasive Belt Press – PRS-480       Quantity: 1 Rated pressure: 15 tons Maximum width: 400 mm Press board temperature: 20–60°C Press holding time: 0–999 sec Power supply: 220V / 1PH / 50Hz 4. Rolling Abrasive Belt Press – PRS-R-1900        Quantity: 1 Pressing width: 1900 mm Pressing mode: Rolling Pressure: 350 kgf Press board temperature: 20–60°C Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 5. Jumbo Roll Slitting Machine – SLT-R-1650N Rcsdpfx Aozrzk Esiroh Quantity: 1        Slitting width: 50–1650 mm Slitting speed: 2–10 m/min Blade pressure: 6–60 kgf Slitting accuracy: ±0.5 mm Working pressure: 0.7 MPa Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 6. Narrow Belt Slitting Machine – SLT-B-300   Quantity: 1 Application: narrow abrasive belt slitting 7. Belt Slitting Machine – SLT-B-650        Quantity: 1 Belt width: 10–650 mm Belt length: 530–4000 mm Blade pressure: max. 500 kgf Belt tension: max. 160 kgf Air pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 8. Wide Belt Slitting Machine – SLT-B-1600 Quantity: 1 Maximum slitting width: 1600 mm Belt length: 1400–3200 mm Air pressure: 0.7 MPa 9. Abrasive Disc Punching Machine – PUN-40T1500    Quantity: 1 Stroke: 5–150 mm Power supply: 380V / 3PH / 50Hz 10. Portable Forklift – ELS500-1000KG   Quantity: 1 Application: material handling / lifting equipment 11. Moulds / Cutting Dies   Quantity: 44 pieces Various moulds / cutting dies for abrasive disc production Advantages: Complete production line Excellent mechanical and cosmetic condition Low operating hours Ready for immediate production Ideal for companies looking to expand production capacity or start abrasive belt manufacturing The original purchase value of the machinery exceeded USD 100,000 (excluding shipping and import costs). Location: Oradea, Romania The machines can be inspected under power by appointment.

Condition: used, Year of construction: 2007, functionality: fully functional, SE-HSM-40/26-COMPACT-PLUS Horizontal four-head welding machine 2MC Horizontal CNC corner edging machine, motion control WST-30 Horizontal turning station Minimum element size 320 × 320 mm Maximum element size 4,000 × 2,600 mm Maximum element weight 80 kg Minimum working area 320 × 320 mm Rcsdpezm N Nrjfx Aireh Maximum working area 4,000 × 2,600 mm

Condition: new, Year of construction: 2024, Type of device/machine SAW PLANT - Manufacturer PRIMULTINI Rcods Ad E Uvepfx Aireh - Type SLH - 1800 - Year 2024 TECHNICAL STATE - The sawmill consists of: - Band saw PRIMULTINI type SLH 1800 , year 2024 - PRIMULTINI stroller year 2024 - Transporters pcs. 2 PRIMULTINI, year 2024 - The sawmill is new and has not yet been installed - According to the above findings, the sawmill should be in technically correct condition

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, FEATURES OF THE LINE FUSION 4H 4-head welding machine Frame unloading unit First Q-MATIC 1 milling module Serial connection between welding machine and cleaning unit Rotating table Rodoy S E E Njpfx Airech TRIMMER 4A electronic cleaning unit Extraction table Second Q-MATIC 2 milling module Refilling unit Automatic frame unloading

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Rsdpfeq U Sa Ssx Airech Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: used, Year of construction: 2004, functionality: fully functional, cutting length (max.): 8 mm, Equipment: cabin, Complete Artiglio log saw with Eagle 1100/I carriage. It has been maintained by Artiglio in 2018. It is in excellent condition. Rcsdev Sr U Eopfx Airjh

Year of construction: 2008, condition: good (used), functionality: fully functional, Complete Industrial Recycling Line for Plastic and Non-Ferrous Metal Separation A presentation video is available. A presentation video of the complete recycling line, recorded before dismantling, is available and can be provided to interested buyers upon request. The video shows the complete configuration of the installation prior to disassembly. A complete industrial recycling line, suitable for processing rigid plastics and other recyclable materials, is offered for sale. The installation is in good overall condition, featuring a robust industrial design and high-quality European components. Rcedpfx Asznmgqeirsh Main components: Feed hopper MEM 46 MG Hammer Mill (Italy) IFE Vibrating Feeder / Vibrating Screen Eddy Current Separator Conveyor belts Electrical control cabinets Steel supporting structure Technical information Hammer Mill Manufacturer: MEM – Società Generale Macchine Edili S.p.A. (Italy) Model: MEM 46 MG Year of manufacture: 2008 Hammer Mill Weight: approx. 7,080 kg Suitable for processing: Rigid plastics (PVC, PE, PP, ABS, PC, etc.) Plastic profiles Plastic containers Mixed recyclable materials Non-ferrous metal recovery Aluminum separation Advantages: Complete recycling line Heavy-duty industrial construction European manufacturers Robust and reliable equipment Ready for installation Ideal for recycling companies looking to increase processing capacity The line can be inspected by appointment. Additional photos and videos are available upon request.

Condition: excellent (used), Year of construction: 2002, Flexible twin-blade circular saw Rjdpfxjz Tfaxo Airsch Cutting height 375mm 4 movable axes 4 x 132 kW motor power 2 x 37 kW height-limiting cutter The machine was only used for 2 years and then stored.

Condition: used, Year of construction: 2019, machine/vehicle number: LC681, Used complete 10hl craft brewery lineTechnical Specifications & Performance DataThis complete 10 hl craft brewery and bottling line is built around a BBC INOX Essential 1000 steam-heated, two-vessel brewhouse. Designed for bottle-conditioned beer production, the plant combines brewing, fermentation, glycol cooling, gravity filling, labeling, crown capping, cold storage, cleaning and handling equipment in one integrated industrial packaging installation.Brew length: 10 hl / 1,000 L per brewBrewhouse: BBC INOX Essential 1000, two vessels, AISI 304 stainless steel, steam heatedHot liquor tank: 2,000 L AISI 304 tank with internal steam coilFermentation: 3 x 18 hl gross-volume cylindro-conical fermenters, approximately 15 hl working volume eachFilling system: six-head linear gravity bottle filler, 480 L/hBottle formats: compatible with 0.33L, 0.5L and 0.75L bottlesWort cooling: Kelvion plate heat exchanger, 2,000 L/hCellar output: approximately 700–800 hl/year with the installed fermentation capacityAdvanced Automation & Control SystemsThe brewhouse is equipped with a digital control panel featuring recipe programming, with capacity for 15 stored recipes, brewing-temperature display and control, and management of the wort pump and lauter rake. Individual temperature controllers on the fermenters support controlled glycol cooling across cone and shell zones.The semi-automatic OMB labeling machine uses an electric drive, label photocell and micrometric adjustments for accurate front and back label application on round bottles. The bottling section includes quick couplings and supply hoses, while the pneumatic AIR-MATIC crown capper requires compressed air for operation.Power supply: 380–400 V, three-phaseOMB labeling machine: 230 VMalt mill motor: 1.5 kWGlycol operation down to -5 °CProduction Line Integration CapabilitiesThis used bottling line forms part of a complete brewing and beverage production plant. The process moves from malt milling and wort production through cooling and fermentation, followed by priming, gravity filling, labeling, crown capping and cold-room bottle conditioning. It is suited to craft beer operations requiring a compact, coordinated production line with packaging machinery for glass bottles.Machine typeManufacturer / modelYearVarious EquipmentBBC INOX Essential 1000 Brewhouse2019ChillerMonobloc glycol chillerFilling MachineLinear gravity bottle filler... Rjdjz E Dfcspfx Airjch

Year of construction: 1987, condition: used, machine/vehicle number: LC609, Used AMENDUNI complete oil prodaction line 20 qlhTechnical Specifications & Performance DataThis complete continuous-cycle olive oil line is engineered for efficient, high-throughput extraction with integrated handling, crushing, malaxing, separation, and decantation. Manufactured by AMENDUNI, it provides a robust platform for second hand industrial packaging and food processing environments, supporting seamless integration with downstream bottling and industrial packaging operations for edible oils.Operating mode: Continuous-cycle olive oil extraction lineManufacturer: AMENDUNIYear: 1987Throughput: Up to 20 quintals per hour (approx. 2,000 kg/h)Included equipment: olives conveyor, leaf remover, stainless steel hopper, screw conveyors, hammer crusher, 4 stainless steel malaxers, 2 paste pumps, 2 decanter centrifuges, pomace screw conveyor, 4 stainless steel decantation tanks, separators, complete electrical panel, pomace-fired boilerConstruction: Stainless steel on key product-contact units (malaxers, hopper, decantation tanks)Use case: Olive oil extraction and clarification prior to bottling/packagingAdvanced Automation & Control SystemsThe line includes a complete electrical panel designed for centralized control of core processes such as crushing, malaxing, paste transfer, decanting, and separation. The control architecture supports safe equipment interlocks and coordinated start/stop sequences across devices, improving uptime and process consistency. Temperature control of malaxers, motor protection, and emergency circuits are managed through the main panel for dependable production. Quick access to drives and instrumentation simplifies routine checks and adjustments during campaign operations.Production Line Integration CapabilitiesThis system manages the primary extraction workflow, integrating seamlessly with fruit reception and washing units. Its modular design ensures a fluid transition from raw fruit to high-quality oil, focusing entirely on the mechanical transformation process. Engineered for industrial efficiency, the system delivers finished oil ready for bulk storage or filtration through a streamlined, high-performance infrastructure.Inline or semi-standalone operation for each individual processing stage.Steady and controlled transfers between units via high-efficiency pumps and screw conveyors.Layout adaptability to suit diverse facility footprints and storage configurations (tank farms).Optimized for edible oil workflows leading directly to bulk storage or filtration stages.Machine Condition & Maintenance HistoryThe installation is complete and reported as functional, with all major components included. It is currently stopped, offering a solid candidate for recommissioning. The comprehensive equipment list reduces the need for sourcing auxiliary machines and supports a coordinated restart plan.Operational Performance & VersatilityDesigned for continuous processing, the line stabilizes paste quality via controlled malaxing an... Rcsdpfj Adt Drox Airsh

Condition: refurbished (used), functionality: fully functional, /// MONOBLOC COLUMN MODEL 1300/ SHF - Cast iron structure with stabilization treatment. - Cast iron flywheels, ellipsoidal shape, flywheel diameter 1300 mm. - Flywheel width of 165 mm for maximum blade width of 180 mm. - Flywheels with solid discs with special ribs to enhance mechanical characteristics, subjected to stabilization treatment; modeled with a double curvature for the best stability on the table; perpendicular to the axis of rotation. - Tilting the upper flywheel to adjust the blade thrust. - Hydraulic blade tensioning with tension indicators. - Main motor 55 kW (75 HP), automatic star-delta start, pulleys, belts and brake - For 180 mm wide canvas ///Carts hydraulic PRIMULTINI with 4 MORSE - 4 hydraulic morses - Max. clamp blade distance 1000 mm - Maximum needle opening 900 mm - Simultaneous hydraulic clamps - Fast and precise movement of clamps - Electronic module 2026 for control MOVEMENT clips - return arms - Hydrostatic advance - Automatic centralized lubrication with pump Rcjdjzmfrcepfx Airsh - Double control unit with seat - Cables ELECTRICAL and electrical panel - Flat and profiled rails for a maximum cutting length of 6 m MANUFACTURER PRIMULTINI ITALY - REFURBISHED LIKE NEW 2026 OPTIONAL: -Log ramp, length 4 m..... 20,000 eur excluding VAT -Log loading arms on the log saw trolley hydraulically operated with a single cylinder..... 20,000 eur without VAT - Conveyors with ROLLER for unloading - length Approx. 7m , width 1m ..... 20,000 eur excluding VAT SECOND UNLOADING ROLLER -length 6.3 m approx. ..... 20,000 eur without VAT