Used Condensate Valve for sale (7,421)

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. Iijdpfxjwc Afhe Ahnjg No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: good (used), functionality: fully functional, Year of construction: 1998, operating hours: 2,618 h, load capacity: 2,000 kg, lifting height: 4,000 mm, free lift: 1,900 mm, load center: 500 mm, fuel type: electric, mast type: duplex, battery capacity: 465 Ah, battery voltage: 80 V, DGUV certified until: 09/2027, fork length: 1,200 mm, total height: 2,550 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, full service history, lighting, sideshift, Linde E 20 electric forklift with the following specifications: * Operating hours: 2,618 * Lifting capacity: 2,000 kg * Lifting height: 4,000 mm * Overall height: 2,550 mm * Year of manufacture: 1998 LINDE 2.0-ton electric forklift with a semi-cabin, very good tires (rear tires new), duplex mast with full free lift, side shifter, 4th valve, multi-lever, two-pedal control, lighting, fork length 1,200 mm, charger. Includes service according to LINDE manufacturer's specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available by appointment only. Please call to schedule. Sale is exclusively to commercial businesses. Subject to prior sale, errors and omissions excepted. Iisdpfxszrr H Ds Ahnjg We can deliver your new forklift cost-effectively with our own ramp-equipped low-loader (transport costs upon request). You can find more information and offers on our website!

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. Iiodpfxsz Dhrqj Ahneg An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Iisdpfx Aewc Rk Ejhnjg Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: good (used), Condensate drain, pressure reducing valve, condensate drain, valve, check valve, control valve Iiodpfx Asvuzpkshneg -Manufacturer: Bekomat Ecoair, condensate drain type KA02 ACO AO / AK 05 -Voltage: 230 VAC/50 Hz Temperature: 1 °C/ 60 °C -Nominal pressure: max. 16 bar -Quantity: 3 available Price: per piece -Transport dimensions: 220/140/H150 mm -Weight: 1.6 kg/pc.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: EF2UA23105068402, This is an UltraVent condensation hood from the premium manufacturer Rational, type UV 202E. This hood can be used with iCombi appliance sizes 20-2/1 in an electric version. Thanks to the condensation technology, the UltraVent binds escaping vapors. An external connection or the extension of an existing exhaust system is not required for this recirculating hood. The hood has been inspected in our in-house workshop and is fully functional. The stated price is the gross price, including 19% VAT. The recommended retail price for this hood is €7,233.00 net. Service: We will gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational appliance type? Ask us; we have access to an extensive range of used and new products. We will gladly advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Iodpozu R Ufjfx Ahnjig Our appliance service for you: 6-month warranty on all electrical parts High-quality branded appliances at fair prices Professional overhaul/inspection & expert cleaning Inspected & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: External dimensions WxDxH: 1084x1134x337mm Electrical connection: 1NAC 230V 50Hz 0.16kW Serial number: EF2UA23105068402 Year of manufacture: 2023 Maximum extraction rate: 705 m3/h Operating noise: Average: 50-65 dB(A) Condition: Used, inspected, and fully functional. SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday, 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC), which can be found at the link "Legal Information".

Condition: like new (used), Year of construction: 2017, functionality: fully functional, High-quality DMS valve applicator - used, but in like-new condition! For sale is an excellently maintained, used DMS aroma valve applicator from Deerberg Mechanical Systems (DMS GmbH), built in 2017. The device was only used for testing and is therefore as good as new. Technical data: • Project number: 639001 Isdpfsv Hzr Asx Ahnoig • Year of manufacture: 2017 • Supply: 400V 50Hz +N +PE • Rated current: 18A • Input fuse: 25A • Control voltage: 24VDC Ideal for precise and efficient aroma valve applications in demanding industrial environments. Although the aroma valve applicator is used, it has always been carefully maintained and is in like-new condition. It is ready for immediate use and offers reliable performance for a wide range of industrial applications. Collection and shipping possible *Shipping prices are calculated individually! Sale without any warranty

Condition: excellent (used), functionality: fully functional, REFRIGERATION UNIT: CARRIER Ijdpez Aa Rxofx Ahnjig Unit with Wilo circulation pumps + external condenser. Dismantled by a professional refrigeration company. The unit does not contain glycol. The transport costs depend on the weight, volume and above all the distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require a telephone contact, so please ask about transport costs and other delivery methods to contact us by phone. Our contact details can be found in the seller's legal information. Payment in cash on delivery on site. We sell and export worldwide, thanks to our very large warehouse capacity we can also flexibly and quickly deliver larger quantities. Please contact us before purchasing. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: used, Year of construction: 2021, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 505 IE 2021, tank capacity: 300 l, usable tank capacity: 300 l, total length: 1,120 mm, total width: 1,120 mm, total height: 1,000 mm, inner diameter: 900 mm, outer diameter: 1,000 mm, overall weight: 400 kg, wall material: stainless steel, wall thickness: 25 mm, wall structure: double-walled, number of chambers: 1, manhole diameter: 500 mm, manhole location: front, reception height: 500 mm, discharge height: 500 mm, operating temperature: 10 °C, operating pressure: 3 bar, pressure (max.): 2.55 bar, power: 38 kW (51.67 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, The core Thissen & Stecher TSRR series is primarily manufactured as an indirectly heated electric vessel. However, Thissen & Stecher designs for energy input from gas. The specific factory physical and structural dimensions for the TSRR 300-liter core chassis provide the official footprint for this unit: 📐 Structural Dimensions (300L Chassis) Internal Diameter: Ø 900 mm Internal Depth/Height: 500 mm External Width: 1,120 mm External Depth: 1,250 mm External Height: Approx. 1,000 mm to the lip (excluding top-mounted lid clearance/venting arrays). ⚖️ Weight: Net Weight (Empty): The baseline unit weight ranges between 380 kg and 450 kg, depending on the reinforced frame option and agitator configuration. Operating Weight (Full): Approx. 680 kg to 750 kg when loaded to its full 300L liquid capacity. 🔥 Gas Heating & Utility Requirements. Fitted with a gas burner jacket, the unit utilizes an indirect thermal jacket fluid or a direct-fired bottom array. Thermal Power Output: Typically engineered between 38 kW and 44 kW to manage a rapid heat-up curve for a 300L volume. Ijdpfx Ahszzxcwenoig Gas Connection Port: 3/4 inch or 1 inch standard gas line connection. Electrical Supply (For Agitator): Requires a 3-phase 400V / 50Hz connection to power the bottom-driven heavy-duty scraping agitator. ⚙️ Operational Features: Agitator System: Bottom-driven stable agitator with standard stepless speed regulation from 10 to 60 RPM. Tilt Angle: Built with an integrated 5° oblique slope toward the front outlet valve to guarantee smooth product discharge and improved mixing geometry. Controller: Standard integration of the Aditec MIC 900 microprocessor supporting multi-step cooking programs.

Condition: used, Year of construction: 1998, machine/vehicle number: 09025018, 25 valves Filler Bertolaso for PET and glass (18 mm, hot filling ecologic with HEPA filter) (1998) Iisdpfjz A Dhxex Ahnjg Capacity: approx. 6000 bph different format parts Optional ID6103 - 24 grippers Rinser Procomac for PET and glas ID6011 - Screw capper Bertolaso 28 mm for PET (Plastic) (1998) with screw cap feeding

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 440079, We offer this ready-to-use GSE Dispensing Colorsat Slim M20-WB paint mixing machine, manufactured in 2008. The unit currently has 12 dispensing stations connected, but it can be expanded to include an additional 8. We will also provide the user manual and operating instructions with the machine. The mixing machine features: Sandpiper pump module Network connectivity Pneumatic control Component circulation system Printer Iiodpfez Daukox Ahnog Dispensing valves Valve cleaning module Dispensing based on formulations Component dispensing Inventory management system We experienced an issue with the scale, which was resolved after replacing the power supply. During dispensing, the mixing machine occasionally fails to dispense the specified component, but only when dispensing in droplet mode. We can send a video demonstrating the machine's operation upon request. If you have any questions or require further information, please send a message or contact us by phone.

Condition: refurbished (used), * Machine made in Germany, reelstands from Massenzana. • Single facer 2200mm, profile B, new Friese corrugating rolls. • Brand new Friese steam heads (3pcs). • New condensate valves. • Bridge Iisdpfekyt Iisx Ahnsg • Reelstands 2PC – Massenzana • Glue kitchen, 2 tanks 2+3T • Slitter- scorer, longitude • Rewinder, role former ejector • Robust cutter (crossway) • Steam generator Zafa, heating oil 8T tanks. • All unconditional bearings, belts etc. has been replaced (brand new). Urgently need to free up the space, best offer wins.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,806 h, load capacity: 4,000 kg, lifting height: 4,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 3,150 mm, battery capacity: 870 Ah, remaining battery capacity: 78 %, battery voltage: 80 V, DGUV certified until: 09/2027, fork length: 2,400 mm, total height: 3,150 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following specifications: Lifting capacity: 4,000 kg Ijdpfx Aezivgcohnjig Lifting height: 4,450 mm Overall height: 3,150 mm Year of manufacture: 2010 Operating hours: 8,806 Still 4.0-ton electric forklift with a full cabin and heater, battery at 78%, good tires (rear tires new), telescopic mast with clear view, side shifter, 4th valve, pre-installation for road traffic regulations, fork length 2,400 mm, charger Additional attachments such as fork positioners, rotators, etc., as well as other fork lengths are available upon request. Price ex works, including 1,000 hours of service according to STILL manufacturer's specifications and a valid FEM (UVV) inspection upon sale. We would be happy to arrange an inspection, demonstration, and test drive by telephone appointment. Sales are exclusively to commercial customers; subject to prior sale and errors and omissions. We can deliver your new forklift cost-effectively using our own ramp low-loader (transport costs upon request). You can find more information about us and our other offers on our newly designed website!

Condition: used, mileage: 490 km, power: 375 kW (509.86 HP), axle configuration: 6x4, color: green, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone). Mercedes-Benz Arocs 2651 L 6x4 short log transporter SCHEMEL short log body, manufacturer: EBERT, dimensions: approx. 6,750 mm between the front wall and the crane, 4 EXTE-D6 stanchions – adjustable with clamping fasteners and lashing ratchets or counter supports for load securing, with 8 EXTE-D5 posts – telescopic, with special Z-profile subframe, 200 mm high in the center of the frame, closed with tear-plate steel, front wall welded construction with internally located special aluminum profiles, approx. 2,600 mm high, 4-part folding and telescopic tarpaulin cover for wood transport, high-quality hose chains and supply lines, with a step ladder for easier access, mounting of side marker lights, access to the crane, double compressed air connections, cover over the battery box and air tank with aluminum tread plate, on both sides, electrical and hydraulic connection (engine start/stop from the crane seat), with oil shut-off valve, with optional pivoting cover for chainsaw etc., holder for snow chains, holder for broom and shovel on the front wall, body primed, vehicle frame black, epoxy resin primed and painted in acrylic quality, oil filling, TÜV inspection – UVV inspection – speedometer check with: Palfinger-EPSILON loading crane Y CRANE ON 2 M 12 Z91 – fully hydraulic wood loading crane M12Z EPSILON loading crane, crane folded to the side, equipment HIC/HD4/04, base unit and crane pillar painted in RAL 7021 black-grey, hydraulic lines protected, integrated operating switch and service interval indicator Ijdpfx Aoyfpwnjhnjig MZ91_2 Z-arm system 9.1 m, reach: 9.1 m, net lifting moment: 107 kNm, maximum performance: 107 kNm HHC_2 High seat with removable manual control, incl. mechanical pivoting device at the crane pillar (without slewing ring), B1B electronic braking system with ABS and ASR, B1F heater, electronic compressed air supply unit, B1H electric compressed air supply and control, medium, B2A disc brake, on front and rear axles, B2X parking brake, electronic, B2Z parking brake, additionally on front axle, B4A condensate monitoring, for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections on the left, C2R wheelbase 4800 mm, C4L frame overhang 2550 mm, C6J steering power pump, unregulated, C6Q stabilizer, front axle, C6U additional stabilizer, rear/trailing axle, D0A leather steering wheel, D0S compressed air connection, in the cab, D1C driver's suspension seat, comfort, D1N co-driver's functional seat, D2N seat back, release, driver's seat, D3B comfort bunk, lower, D4T curtain, transverse in front of the bunk(s), D4Y sun blind, side, driver's side, D5F LED ambient lighting, D6G automatic climate control, D6M hot water auxiliary heater, cab, D7A thermal insulation, additional, D8N lift roof, electric, E3R power socket 24 V/25 A, co-driver's footwell, E5H switch for night driving lights, E5K switch for MirrorCam, on the bunk, E6A trailer socket 24 V, 15-pin, E6Z reversing warning, E7F cable remote control for air suspension, E9G pre-wiring for electrical equipment, F0F side module, N3 vehicle, F0T Mercedes star, illuminated, F2E floor variant, tunnel 170 mm, for storage compartment on the left, F2G cab width 2.30 m, F2W StreamSpace, F5L sun visor outside, transparent, F6C windshield tinted, F6I front mirror, heated, F6Q compressed air horn, F6T MirrorCam, F8V light sensor, F8W rain sensor, G0B powertrain, 44 t to 80 t, G0

Condition: used, machine/vehicle number: FN535356, Year of construction: 2017, operating hours: 3,483 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fork length: 1,800 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 3,600 mm Fork length: 1,800 mm Lifting mechanism Mast design: Duplex mast Mast type: Free-lift mast without a central hydraulic cylinder MACHINE DETAILS General Year of manufacture: 2017 Operating hours: 3,483 h Drive type: LPG Dimensions and weight Own weight: 4,896 kg Overall length: 5,700 mm Overall width: 1,300 mm Overall height: 2,420 mm Maintenance and inspection UVV certificate valid until: Next service due in: 516 h Starter battery: new (?) Previous owner: former Jungheinrich full-service unit EQUIPMENT Side shifter 3rd valve Full cabin Heater Iisdpfx Ahozz Hrysnsg Windshield wiper LED work light (front) LED work light (rear) Comfort seat LPG cylinder exchange system

Condition: used, Year of construction: 2015, operating hours: 12,091 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 5,450 mm Mast: Triplex mast with full free lift Fork length: 2,000 mm Fork adjustment: Hydraulically adjustable MACHINE DETAILS Machine type: Diesel forklift UVV certificate valid until: 05/2027 Dimensions & Weight Ijdpfx Aozz Hl Hshnoig Dimensions (L × W × H): 6,300 × 2,400 × 3,200 mm Dead weight: 15,000 kg Operating hours: 12,091 h EQUIPMENT 3rd and 4th valve Formerly a Linde full-service unit Full cabin Heater Windshield wiper LED work light front LED work light rear Safety light rear Comfort seat Lumbar support Seat heating If requested, a mast that is too high can be disassembled for transport and loaded accordingly. All dimensions are approximate values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3

Condition: new, Year of construction: 2013, Internal valve, Petrol Valves, Body - A995-4A/UNS, J92205 NACE, Class ASME 2500, 8inch, Serial 39275. API 6D, ISO 14313, 3pcs. Iiodpsvvh H Ejfx Ahnog

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X396V01495, Year of construction: 2019, operating hours: 15,000 h, load capacity: 8,000 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,300 mm, No minimum price – guaranteed sale to the highest bidder! The forklift has a license plate! TECHNICAL DETAILS Iiedpfx Ahszza Tkenog Lifting height: 7,000 mm Lifting capacity: 8,000 kg Number of wheels: 4 MACHINE DETAILS Mast type: Duplex Fuel type: Diesel Engine manufacturer: Deutz Operating hours: 15,000 h Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,230 x 4,100 mm Overhead height: 4,300 mm Unladen weight: 13,050 kg EQUIPMENT 3rd and 4th hydraulic valve for the fork carriage Heater Joystick Work lights Full cabin User manual CE marking

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. Iiedpfx Ahez Ai Tpsneg - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: good (used), Year of construction: 2002, Pig slaughterhouse, approx. 200 animals/hour. Location: 26215 Wiefelstede/ Germany The plant has been disassembled into individual parts. -consisting of the following components: -1): 1x Rider seat retainer with automatic cardiac/brain anesthesia, Banss color, type LVR-8940L -2): 1x bleeding plate conveyor, make Banss, type EFB -4): 1x plate conveyor type PB-1500 -5): 2x flame/hygiene flame oven, make Banss, type BF2 -6): 1x Dry whipping machine, manufacturer Banss, type T3S -7): 1x Whip washing machine, manufacturer Banss, type AW -8): 1x Pre-wash machine, manufacturer Banss, type V3S -9): 1x condensation brewing tunnel, make KBT-220 -10): 1x Continuous hair removal machine, manufacturer Banss, type 300-2/1 -11): 1x cable lot -12): 1x bleeding and brewing tunnel conveyor -13): 1x internal conveyor -14): 1 Slaughter conveyor -15): 1x PLC controller, manufacturer Siemens, type S7-414-2DP -16): 1x Weighing rail conveyor, manufacturer Banss, type WSF560 Li -17): 1x evaluation terminal, manufactured by Bizerba, type Banss, type ST(SWE) -18): 1x overhead conveyor scale, manufacturer Bizerba type ST(NSW) -19): 1x empty hook conveyor system for slab conveyor, manufacturer Höcker -20): 1x steam generator, manufacturer Certuss, type Universal 1300 oil -21): 1x intestinal feces separator, make Itec, type 300 Ijdoh Db Hcopfx Ahneig -22): 1x rotary lobe pump, manufacturer Itec/Vogelsang, type VX136/186Q -23): 1x pump for bowel transport -24): 1x Typhoon packaging transport system for raw meat, manufactured by MariMatic, type E0800-150-200FB -25): 1x ejector, manufacturer MariMatic, type TF852 -26): 1x separator, make MariMatic, type 200 L -27): 6x suction points with slide valve, manufactured by Stafsjö, type DN150 -28): 1x shaft cabinet, manufacturer MariMatic, type S5-200 -29): 1x car marker, make Carometec Food Technology -30): 1x Item Box Stall -31): 1x lot of pipework -32): 1x Item of drawings/operating instructions, circuit diagrams -34): 1x supporting structure Individual components can be sold separately; please inquire.

Condition: used, functionality: fully functional, Year of construction: 1996, operating hours: 11,233 h, load capacity: 2,000 kg, lifting height: 5,500 mm, free lift: 1,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Triplex Transmission: Hydrostatic Condition: Ready for use and fully functional Iisdsz Dc Duopfx Ahnsg Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Description: Side shifter, 3rd valve, rear work light, front work light, half-cab, LED.

Condition: used, Year of construction: 2003, machine/vehicle number: M338, Used Crown Bevcorp 40 valve filling monoblockTechnical Specifications & Performance DataThis used can filling monoblock combines a Bevcorp UB40 rotary can filler with an Angelus 61H seamer, delivering dependable performance for industrial packaging and beverage production. The system is configured for aluminum cans and is supplied with tooling for multiple can body styles. It is an excellent option for a second hand solution within a used bottling line where reliability and ease of integration are essential.Filler model: UB40 rotary can fillerFiller valves: 40Seamer model: 61HOverhauled in 2019Containers: Aluminum cans (standard and sleek)Ends: 202 can endsSpeed: 20.000 BPHConfigured can sizes: 12 oz (approx. 0.355L) and 16 oz (approx. 0.473L)Included components: Can transfer conveyor, electrical panel, lubrication panel system, stainless steel mechanical safety guarding, handling parts, operator manualElectrical: 480 V, 3 Ph, 60 HzNitrogen dosing: Vacuum barrier nitrogen dosing systemCondition: Used – good; regularly maintainedAdvanced Automation & Control SystemsThe monoblock includes an integrated electrical panel to manage coordinated operation of the filler and seamer. Safety interlocks and stainless steel safety guarding support operator protection during beverage production. Variable speed drive elements are supported by a dedicated lubrication approach for reliable operation under continuous duty. Quick access to guarding and panels facilitates routine adjustments and preventive maintenance in industrial packaging environments.Production Line Integration CapabilitiesDesigned to operate inline with upstream and downstream equipment, this filler–seamer block integrates smoothly into a used bottling line or a new beverage production layout. The included can transfer conveyor simplifies synchronization between the 40-valve filler and the 61H seamer. Existing handling parts and tooling accommodate both standard and sleek aluminum cans with 202 ends, supporting efficient format changes between 12 oz and 16 oz. The monoblock can operate as part of a complete packaging machinery setup alongside depalletizing, rinsing, coding, and case packing systems.Machine Condition & Maintenance HistoryThe equipment is described as used – good and has been regularly maintained. Mechanical safety guarding, lubrication panel, and operator manual are included, indicating a machine that has been cared for and kept in service-ready condition. This makes it a strong second hand choice for plants seeking to expand or refresh beverage production capacity with minimal downtime.Operational Performance & VersatilityEngineered for flexibility, the monoblock is capable of running carbonated and non-carbonated beverages. The 40-valve filler supports steady throughput and consistent fill accuracy, while the Angelus 61H seamer is recognized for robust end application and seam integrity. The vacuum barrier nitrogen dosing system enhances product quali... Iodpfezcf Idjx Ahnsig

Condition: excellent (used), functionality: fully functional, SPX APV & ALFA LAVAL | Industrial CIP Valve Manifold (Hybrid Process Valve Block on a Frame) Manufacturers: SPX FLOW / APV and ALFA LAVAL Model / System Type: DELTA / UNIQUE MIXPROOF (Integrated single- and double-seat valve block) Control Heads: SPX APV (CU4 series model, including CU41N S AS-i) Control Heads and Actuators: ALFA LAVAL Main Component Identifier: Olympia BE-0112005 / DS53XVE03 Configuration Factory Code: 13085-089614-E Power and Communication: Industrial AS-Interface network bus, pneumatic actuator power supply Construction Material: AISI 316L / 1.4404 grade stainless steel Supporting Structure: Factory-made stainless steel support frame with adjustable leveling feet This professional, hybrid valve manifold, based on components from SPX APV and Alfa Laval, represents a top-class industrial distribution hub. This device is the absolute core of liquid flow management systems, automatic process distributors, and advanced CIP (Cleaning In Place) stations. This type of valve block is a key pillar of infrastructure in large and medium-sized dairy plants, breweries, fruit and vegetable processing plants (juice, beverage, and concentrate production), as well as in the production of liquid ready meals, sauces, and in the chemical and food industry. The use of Mixproof technology (double-seat valves) from Alfa Laval, combined with SPX APV CU4 digital control, solves one of the biggest problems in liquid logistics: it allows the simultaneous flow of two completely different media (e.g., a finished food product and an aggressive cleaning agent, such as lye or acid) through a single valve block, without any risk of cross-contamination. When switching, special drain chambers immediately remove any remaining residue, providing a 100% guarantee of microbiological cleanliness. Iisdpfx Asy Ufglshnsg Thanks to AS-Interface communication, the manifold transmits real-time feedback signals about the exact position of each valve seat directly to the main PLC controller (e.g., Siemens S7). This prevents operator errors, reduces technological downtime, and allows for the simultaneous cleaning of one section of the pipeline while continuous production continues on the other. The compact mounting of the entire unit on a sturdy, stainless steel frame (so-called skid construction) dramatically reduces installation costs in a new or modernized plant. Key features and advantages: - Hybrid of best technologies (SPX APV + Alfa Laval): Combines the mechanical reliability and sealing of Alfa Laval stainless steel with the advanced control and monitoring electronics of the APV DELTA CU4 series. - Quick installation and space saving: A complete, compact valve block mounted on a stable mounting frame – delivered as a plug-and-play unit, minimizing the time required for line modernization.

Condition: used, Year of construction: 2015, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 210054, tank capacity: 225 l, usable tank capacity: 200 l, total length: 800 mm, total width: 1,600 mm, total height: 1,020 mm, inner diameter: 1,498 mm, overall weight: 315 kg, wall material: stainless steel, wall thickness: 10 mm, wall structure: double-walled, number of chambers: 1, manhole diameter: 50 mm, manhole location: front, reception height: 250 mm, discharge height: 250 mm, operating temperature: 300 °C, operating pressure: 20 bar, input voltage: 230 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, The Firex Easybratt 200L Gas Variant (BM1G200I) is a heavy-duty industrial tilting bratt pan engineered for bulk cooking, braising, shallow frying, and boiling. While marketed in the 200-liter chassis tier, its precise volumetric breakdown consists of a 225-liter total geometric capacity with a 170-to-200-liter usable working capacity. The comprehensive breakdown of dimensions, weight, and utilities sourced from the manufacturer's technical specifications includes: 📐 Physical Dimensions & Cooking Vessel Overall Width: 1600 mm Overall Depth: 900 mm Overall Unit Height: 1020 mm (with lid closed) Vessel Internal Width: 1498 mm Vessel Internal Depth: 564 mm Vessel Internal Height: 250 mm Cooking Surface Area: 84 dm² 🏋️ Weight & Construction Details: Net Weight: 315 kg. Pan Base Thickness: 10 mm to 15 mm high-thickness compound steel for balanced heat distribution. Chassis & Tank Material: High-grade AISI 304 stainless steel throughout. Tilting Mechanism: This is a motorized model; the suffix is BM1G200I. Lid: Double-skinned, counterbalanced lid with spring loading to reduce heat loss and enable hands-free opening. 🔥 Gas & Burner Specifications: Total Gas Power: 40 kW. Burner Type: High-efficiency stainless steel multi-tube gas burners. Gas Connection Size: 1/2" inlet. Thermostatic Control: Micro-adjustable range between 45°C and 300°C Safety Features: Automated pilot valve safety shut-off; when the tank is tilted/lifted, burners drop down to a pilot-only mode and automatically re-ignite when lowered back into place. 🚰 Water & Electrical Supply Requirements Water Connection Size: 1/2" cold water inlet Water Supply Pressure: 50 to 300 kPa Iiodpfx Ahez Ad Stjneg Water System: Integrated swivel water fill tap built into the top surface for automated pot filling and seamless cleaning. Electrical Feed: Requires a basic 230V / 1-phase supply solely to power the easy-light electronic ignition and internal control array.

Condition: used, mileage: 1,62,192 km, power: 335 kW (455.47 HP), first registration: 02/2022, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total length: 9,440 mm, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, 2846 Actros Roll-off Body + PK 28002 Tec E Crane + Grapple Wheelbase: 4.80 m Suspension: Leaf-air suspension Iijdpfx Ahjzn Dbroneg Palfinger Crane Type: 28.002 TEC E Operating hours: 2438 h 6x Hydraulic extension 2x Hydraulic outriggers 5+6 control + Remote control + Grapple Palfinger Roll-off Hook Year of manufacture: 2022 Special equipment: Axle load measuring device, front axle load 9.0 t, equipment package: Driving, right exterior mirror with maneuvering position, electric sun visor for windshield, sun visors for side windows, driver and passenger door, sun visor for driver's side window, equipment package: Media, equipment package: Visibility, Bi-Xenon headlights, LED taillights, headlight cleaning system, 220 Ah battery (AGM), standard and DuoMatic brake connections, interactive cockpit multimedia system, navigation system, remote query function Remote Online, additional compressed air tank, air horn, cab: with air suspension, suspension: front springs 9.0 t, 3 leaves, additional parking brake on front axle, fire extinguisher, vehicle without MirrorCam exterior mirror camera, 12-speed transmission - type: G 281-12, notebook holder, rear axle planetary gear 485, folding table in bulkhead, automatic climate control, comfort telephony (Bluetooth) with inductive charging cradle, additional fuel pre-filter, fuel tank: 390 L aluminum, left, cooler box / refrigerator, cooling capacity for hot climates, steering oil cooler, air intake behind cab, air filter: cyclone air filter, 2-cylinder air compressor, rear engine PTO, ISO pump, reinforced engine brake, reinforced engine mounting, reinforced engine compartment encapsulation, trailing axle 8 t steered, relief-valved, liftable, auxiliary drive MB 123-10c, programmable special module, PremiumComfort mattress lower, wheelbase variant 4900 mm, frame lowering with bellows residual pressure control, frame overhang 2550 mm, reversing warning sound and flashing warning light (external warning signal), switch for loading platform, disc brakes with partial protection, interface for fleet management system, fuse box, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat leather, seats in cab: armrests on both sides of passenger seat, seats in cab: driver seat with massage function, seats in cab: driver seat comfort suspended seat, external sun visor, stowage flap on the outside left, 12V / 15 A socket in the passenger footwell additionally, 24V / 25 A socket in the passenger footwell, 24V socket in storage compartment on the right, door extension for cab, additional thermal insulation, two-plate clutch, oil cooler transmission Additional equipment: Emission standard EURO 6, storage compartment above windshield with lid, axle configuration: 6x2, Actros 5, Actros cab L, heated approach / front mirrors, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pin, exhaust tailpipe to the center of the vehicle, equipment package: Powertrain 2, batteries arranged side by side, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for driving lights (light sensor), cab: cab entry fixed, cab: interior package chrome, cab: tilting mechanism hydraulic, cab: L ClassicSpace, 2.30 m, tunnel 170 mm, cab variant: ClassicSpace, cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab variant: L, stowage flap on the outside right, bumper corners a