Used Core Sampler for sale (972)

Condition: used, Year of construction: 2007, Cutting area: 3900 x 3100 mm Motor power: 11 kW Saw blade diameter: 350 mm Speed: 4070 rpm Feed speed: 0-70 m/min Maximum clamping jaw opening: 72 mm Maximum saw blade protrusion: 77 mm with scorer Storage location: Supplier Lhsdexfbwrspfx Aaben

Condition: new, functionality: fully functional, Year of construction: 2025, color: grey-black, Office Container 6x3 Meters – Insulated, with Glass Door and Glazing – Suitable for Year-Round Use The price refers to a 6 x 3 meter container with 2 glass glazed windows and 1 glass door. The photos display various options and façade colors – even more variants are available! We manufacture containers and pavilions in various sizes, starting from 15 m² and up. Our offer is constantly evolving – we are always improving! Specifications of the standard model (6.0 x 3.0 x H 2.9 m / 18 m²): Lhodpfx Ajxpt Iqoabon Insulated walls: Sandwich panel with a 100 mm thick styrofoam core, U-value: 0.38 W/m²K, RAL 7016 color Floor: Sandwich panel with 100 mm thick polyurethane core, U-value: 0.22 W/m²K, including OSB board and PVC flooring Roof: Single-pitch design, sandwich panel with 100 mm thick polyurethane core Exterior finishes: Decorative trim in “golden oak” / “walnut” Windows: 2 glass glazed units (2000x1000 mm) Door: 1 full-height glass door (1100x2050 mm) Decorative front in “golden oak” Electrical installation: 2 ceiling lamps, 1 switch, 2 double power sockets, fuse box Ventilation grilles Customization options: - Separate WC cabin with full equipment - Custom sizes available: e.g., 5x3, 7x3, 8x3, 6x6 meters - Custom RAL color - Additional equipment on request: air conditioning, blinds, alarm system, video surveillance, piping, sanitary fittings, etc. Applications: Suitable as an office, retail pavilion, or service kiosk. Fully insulated and equipped – ready for all-year use. Price: The listed price is exclusive of VAT and applies to the model shown in the photos. Transport: Delivery available with our own transport fleet. Important: This advertisement is for informational purposes only and does not constitute a legally binding offer. We reserve the right to make changes to prices, specifications, and availability.

Condition: used, Year of construction: 2006, Carriage length: 3000 mm Cutting width at rip fence: 1000 mm Cutting width at cross-cut fence: 3200 mm Cutting depth: 154 mm Scorer: yes Lhedsxp Radjpfx Aaben Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: electric / position control Cross-cut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Cross-cut scale display: scale Cross-cut scale with miter function: yes Saw blade diameter: 450 mm Speeds: variable Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 1200 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 29,497 h, functionality: fully functional, machine/vehicle number: 230240, clamping force: 2,000 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Here, as a dealer specializing in injection moulding machinery, we are offering the following well-maintained used injection moulding machine: Naturally, we also purchase well-maintained injection moulding machines from model year 2010 onward. We have been a leading wholesaler of used injection moulding machines for over 25 years. Important notice – Tax advantage for used machines: From 01.07.2025, used machines can also benefit from a special depreciation scheme of 30% annually. In addition to the lower purchase price compared to new machinery, you can utilize the same depreciation allowances as with new machines (see: 'Growth Booster', (§ 7 paragraph 2 EStG-E)). Offered Machine: Arburg 1500T 2000-400 Vertical Rotary Table Machine Machine No. 225999 A full list of equipment is available in the downloadable documents (machine card). Control: Selogica Year of manufacture: 2013 • Total machine cycles: only 1,907,296 Lhodpfxsuuf Iae Aabon • Automatic operation hours: 42,160 Clamping Unit • Distance between platens: 700 mm • Clamping force: 200 t / 2000 kN • Mould installation height: 400 mm • Table diameter: 1500 mm • Rotary angle: 180° • Rotation time: 2.4 s min. • Maximum weight on rotary table: 1,050 kg • Ejector force: 45 kN / 175 mm stroke Injection Unit • Screw diameter: 40 mm • Shot volume: 201 ccm • Injection weight: 184 g • Injection pressure: 2,000 bar Extras • 2-station rotary table, 180° forward/reverse alternating operation with servo-electric rotary drive and hydraulic locking pin for fine-centering of the rotary plate in end position; separating guard between clamping and loading areas, the height on the rotary plate adjustable to suit the mould bases, with media lines and connections for the mould bases • Rotary table diameter: 1500 mm • Max. clamping force: 2000 kN • Injection unit according to EUROMAP 400 • Screw diameter: 40 mm • Special ergonomic rotary table version with the following features: - Corrosion protection treatment for rotary table (VE 574/90) - Water connections: 2 circuits - 3 hydraulic connections for needle shut-off system - 3 core pulls - Per station: one core pull and 2 x tempering - 6 x mould temperature control - 12 control zones for mould heating circuits - 2 x Kistler cavity pressure sensors - Temperature monitoring for start-up components • Weight: 11,200 kg • Power: 22 kW motor – heating power 9.4 kW (5 zones) – connected load 100 A The machine is offered fully tested for functionality, fully operational with a start-up guarantee – tested before dismantling. About our company and offered machines: - We only sell our own machines purchased from current production, from our warehouse in Hannover. - All offered machines are tested before dismantling. - We DO NOT deal with insolvency goods – we are NOT brokers trading in third-party property. - All machines stem from successful businesses with a proven maintenance and servicing record. - All listed machines can be inspected at our warehouse.

Condition: excellent (used), Year of construction: 2016, Engel duo 1800/500 eco drive Clamping force: 500 t Screw diameter: 70 mm Injection volume: 1139 cm3 Injection pressure: 1735 bar Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Type: Horizontal Drive: Hydraulic Lhedpfxow Hbyle Aabon CC300 controll Hours: 38.000 Euromap 67 2 core pullers Ecodrive 2 pumps Quick clamp system

Condition: used, x-axis / mm y-axis / mm Lhodjxdnrajpfx Aaben z-axis / mm The boring mill is sold without clamping plates – the price refers exclusively to the boring mill. Technical data Horizontal milling and drilling machine with support sleeve Working range Vertical adjustment of the headstock from the clamping surface: 0 - 3000 mm Horizontal adjustment of the column: 7000 mm Maximum drilling depth with drill spindle alone: 1200 mm Maximum drilling depth with drill spindle and support sleeve together: 1300 mm Drill spindle diameter: 150 mm Milling spindle diameter: 240 mm Support sleeve diameter: 390 mm Support sleeve extension: 700 mm Drill spindle tool holder: ISO 50 Maximum workpiece weight: 70,000 kg When placed in 4 prisms: 95,000 kg Main drive Total speed range, adjustable from 2 - 795 rpm Series 1 2 - 50.4 rpm Series 2 50.4 - 126 rpm Series 3 126 - 314 rpm Series 4 314 - 795 rpm Maximum drive power at rated speed 17.5 80 kW Quick adjustment speed of spindle box and column 1800 mm/min Rapid adjustment speed of drill spindle and support sleeve 1400 mm/min Fine adjustment speed of spindle box and column medium 75 mm/min Fine 3 mm/min Fine adjustment speed of drill spindle and support sleeve Medium 57.7 mm/min Fine 2.5 mm/min Feed of headstock and column for milling Row 1 3 - 75 mm/min Row 2 72 - 1800 mm/min Feed of drill spindle for drilling Row 1 0.19 - 4.7 mm/min Row 2 2.2 - 56 mm/min Row 3 56 - 1400 mm/min Special equipment Numerical length measuring device in horizontal and vertical directions Accuracy 0.01 mm Rotatable and movable clamping table, Collet & Engelhard, Offenbach Model Tdvmf 1.6 (for technical data, see ‘Clamping table’) Rotatable and movable clamping table from Scharmann, Rheydt Model DAV 1600 Rotatable and movable clamping table from Froriep, Rheydt Swivel crane for tool change, maximum load capacity 500 kg Special tools Carbide core drill bits for extracting core samples Universal facing and boring head from Wohlhaupter, Frickenhausen Model UPA7, with the following specifications: 1 division of the fine adjustment 0.01 mm in diameter 1 revolution of the fine adjustment 0.5 mm in diameter Facing and boring range 0 - 1250 mm Maximum slide adjustment 210 mm Automatic slide feed in mm/rev during facing 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - Quick adjustment per revolution of the quick adjustment spindle 6 mm in diameter Largest diameter of the slide at zero position corresponds to the smallest drilling diameter of 323 mm Head height without shaft 260 mm

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Ledpsvvi I Rsfx Aabehn

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or Lhedefp A I Eopfx Aabsn keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: good (used), Horizon BQ-270C Perfect Binder Machine in very good condition. Ready to use. Very low mileage. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of book covers or pages. The Horizon BQ-270C is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. Equipped with a core thickness scanner, it allows for on-demand binding. Lsdpfxjxk U R As Aabjhn Binds books with a thickness of 0.5 to 50 mm and a spine length of 135 to 320 mm, with a maximum production rate of up to 500 books per hour. Factory-installed cutter with additional scoring knives. Maximum milling depth up to 3 mm. Automatic cover feeding via a suction drum with a secure, consistent alignment with the bound sheets. A factory-installed system creates 4-fold creases on the cover, which automatically adjusts for precise alignment.

Condition: excellent (used), operating hours: 49,130 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 42 mm, displacement volume: 214 cm³, injection pressure: 1,724 bar, ejector force: 20,400 N, ejector stroke: 130 mm, plate length: 610 mm, plate width: 635 mm, total length: 4,370 mm, total width: 1,210 mm, total height: 2,200 mm, overall weight: 3,730 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 725 mm, Equipment: documentation/manual, warehouse no.: 503452 manufacturer: BOY type: 90 E controller: Procan ALPHA year of construction: 2012 operation hours: 49130 h clamping force: 900 kN distance between tie-bars h x v: 430 x 360 mm size of mould plates h x v: 635 x 610 mm min. mould height: 250 mm max. open daylight: 725 mm opening stroke: 475 mm screw diameter: 42 mm Ljdpfjxqc Hfsx Aabohn swept volume: 214.7 ccm injection pressure: 1724 bar screw length: 20 l/d screw stroke: 155 mm screw speed: 280 min screw torque: 700 N plasticising rate: 136 g/s PS number of heating zones: 4 nozzle stroke: 250 mm equipment included screen text german core pulling hydraulically 1x machine without material hopper machine without water flow regulator Anti vibration mounts interface EUROMAP 67 interface USB measures of machine l x w x h: 4.37m x 1.21m x 2.2m total weight: 3730KG

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 Origin: ENGEL St. Valentin, Austria 🔧 CLAMPING UNIT 1. Clamping force: 7000 kN 2. Opening force (with pressure pads): 510 kN 3. Opening stroke: 1350 mm 4. Minimum daylight: 450 mm 5. Maximum daylight: 1900 mm 6. Minimum mold height: 450 mm 7. Maximum mold height: 950 mm 8. Distance between tie bars (H × V): 1465 × 1360 mm 9. Mold plate size (H × V): 1025 × 990 mm 10. Ejector stroke: 250 mm 11. Ejector force: 63 kN 12. Dry cycle time (Euromap 6): 3.6 s (Z) / 2.4 s (Stroke) 🔩 INJECTION UNIT 1 Ljdpfswnqk Nox Aabjhn 1. Screw diameter: 90 mm 2. Max. shot volume: 3180 cm³ 3. Max. shot weight (PS): 2880 g 4. Injection pressure: 1470 bar 5. Injection speed: 100 mm/s 6. Plasticizing capacity (3-zone screw): 270 g/s 7. Plasticizing capacity (barrier screw): 308 g/s 8. Injection flow rate: 465 cm³/s 9. Heating zones: 7 10. Installed heating power: 75 kW 11. Hydraulic pump drive: 100 kW Engel Linear Robot ERC53/1-E 22 Hotrunner 4 core pullers PC, ABS material

Condition: like new (used), Year of construction: 2023, machine/vehicle number: MH-FJ-2_Vorführ, Our VOGEL MH-FJ-2 demonstration case sealer is equipped with a side drive belt system. The machine automatically adjusts to the respective carton size within the specified range. Carton formats: Length 150 - ∞ mm Width 140 - 480 mm Height: 120 - 480 mm Technical data: Length 1,150 mm Width 1,005 mm Weight 250 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Lhsdpexqdgyefx Aabjn Our MH-FJ-2 carton sealer has been specially developed for changing carton formats. formats. Thanks to the pneumatic adjustment of height and width, it is possible to changing carton formats can be processed quickly and easily without manual intervention. be processed quickly and easily. The machine adapts to the different formats at lightning speed. Thanks to two side & two upper conveyor belts, your cartons are conveyed safely through the carton sealer. The lid flaps of the cartons are pressed down manually before being fed into the machine. the machine. This machine is designed for adhesive tapes with 76 mm core diameter and 50 mm width. We recommend the use of machine adhesive tape with more meters per roll (than with hand rolls), so you can work longer without work without having to change the adhesive tape! You can use PP & PVC adhesive tapes as well as environmentally friendly paper adhesive tapes can be used. The adhesive units can be easily removed to change the adhesive rolls. However, this can also be used if you only want to tape the top of cartons ( (keyword: automatic bottom cartons). Of course, this machine also bears the the CE mark. An on-site air pressure connection is required to operate this machine! is necessary! Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Ljdpevvi Iqefx Aabshn

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, General Data Measurements width 2200 mm Measurements depth 7200 mm Measurements height 2400 mm Machine weight 17700 kg Injection Unit Screw diameter 60 mm Shot weight 723 g/hp max Injection pressure 2500 bar max Clamping Unit Clamping force 3200 kN Opening stroke 700 mm max Distance between bars 720 mm x 720 mm Mould height min 300 mm Size of mold platens 1040 mm x 1040 mm Additional Equipment The Wittmann robot is not included Conveyor belt is included, protective housing only for the electrical components No other peripherals are included. This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Application Types Lhodpjxpkqiofx Aabjn Injection Moulding

Condition: excellent (used), CATALOGUE NUMBER 7731 - Maximum main saw blade diameter without scorer: 400 mm - Maximum main saw blade diameter with scorer: 350 mm - Cutting height with 400 mm blade: 110 mm - Electrically adjustable saw blade height and angle - Electric angle display - Arbor diameter: 30 mm - Scorer blade diameter: 120 mm - Electrically adjustable scorer height and lateral position - With sliding table - Sliding table cutting length: 2900 mm - Pressure beam: 1480 mm - Sliding table guidance on steel bars - Cutting width with rip fence: 1350 mm - With side carriage - Main motor: 5.5 kW Lhodpfxoxa Elps Aabjn - Scorer motor: 0.75 kW - Electric brake - 4 spindle speeds: 3000/4000/5000/6000 rpm - Electronic speed display - Extraction port diameter: 90/120 mm - Table dimensions with extension and widening: 2060 x 1410 mm - Blade guard - Machine dimensions (LxWxH): 3150 x 3650 x 1550 mm - Weight: 1155 kg ADVANTAGES – German manufacture – Electric adjustment of the saw and scorer – With scorer – Pressure beam – Unpainted – Used saw in very good condition Net price: PLN 33,900 Net price: EUR 7,980 (at the exchange rate of 4.25 EUR) (Prices may fluctuate with significant currency changes)

Condition: good (used), Year of construction: 2003, operating hours: 67,092 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, displacement volume: 5,655 cm³, ejector force: 1,18,000 N, ejector stroke: 300 mm, plate length: 1,690 mm, plate width: 1,960 mm, total height: 2,500 mm, overall weight: 76,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503007 manufacturer: BATTENFELD type: HM 10000-9200 controller: UNILOG B4 year of construction: 2003 operation hours: 67092 h clamping force: 10000 kN distance between tie-bars h x v: 1120 x 1400 mm size of mould plates h x v: 1960 x 1690 mm min. mould height: 550 mm max. mould height: 1020 mm max. open daylight: 2120 mm Ledpfx Aexqc Ageabohn opening stroke: 1100 mm screw diameter: 120 mm swept volume: 5655 ccm injection pressure: 1632 bar equipment included: screen text german complact flash drive core pulling hydraulically 4x Anti vibration mounts electric interface for handling units according to Euromap 12 interface for temperature control units increased oil cooler mould heating 16x measures of machine l x w x h: 11.6m x 2.9m x 2.5m total weight: 76500KG

Condition: excellent (used), Year of construction: 2010, Clamping force: 110 t Tie bar distance: 470x420 mm Min Mould height: 275 mm Max Mould height: 775 mm Platen size : 680x663mm Screw diameter: 22 mm Shot volume: 41 cm3 Opening force: 55 kN Opening path: 500 mm Correct injection pressure: 2864 bar Nozzle pressure: 47 kN Path of the pant : 250 mm Forward ejector force: 41,2 kN Reverse: 26,4 kN Max. mold weight : 1000 kg Lhedpfx Aasu Ekaqsbon min. tool diameter: 315 mm Working hours: 70.000 h Type: Horizontal Drive: Hydraulic Unilog B6 controll Air Valve Core puller Euromap 67

Condition: used, power: 245 kW (333.11 HP), fuel type: diesel, Year of construction: 2012, operating hours: 8,859 h, Empty weight: 29.700 kg Auction item. Front wheel loader is in working condition. Lodpfxexpquno Aabshn Automatic greasing system is installed. Sold together with ASCOREL weighting system.

Condition: new, Röhm KFB ND25 VKS core mandrel 396268A ,unused, 100% functional, scope of delivery according to photos Ljdpfx Aasi Ec Dqjbehn

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Lhodpow Tt R Iofx Aaben Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Year of construction: 2012, condition: like new (used), Multifunctional machine designed for peeling whole apples, as well as cutting them into pieces or slices. By using a special knife, apples of various sizes can be peeled. The equipment includes a coring knife. The machine is ready for operation. Technical specification: Ledpfx Ajxpm Scsabehn – capacity: up to 2,000 pcs/hour – power supply: 400 V, 50-60 Hz – power: 3 kW – compressed air: 6 bar

Condition: ready for operation (used), Works fine. Peels and cores without slicing. Lodpfx Aaovf A Sbebohn

Condition: excellent (used), Year of construction: 2016, Engel Victory 1800/300 Spex year 2016 Clamping force: 300 t Screw dia: 70 mm CC300 Hours: 44000 2 core pullers 3 air valves 8 channels of hot runner controls Isolation blanket Lodpfexlk Imox Aabshn Interface for robot and dosing unit Integrated conveyor belt Viper 12 Conveyor belt

Condition: ready for operation (used), 500-1000 kg per hour processimg capacity. 60 broccoli per minute. Type Floretting broccoli machine Manufacturer Agrabest Model Pop a Top Capacity 52-60 pieces per minute Voltage 400 V Material Stainless steel Year of built 2008 Weight 150 Dimensions 1,80x0,65 Power 2 kW Request information Specifications Eliminate the need for the inefficient manual cutting of broccoli florets with Pop A Top. This is an innovative machine which can produce broccoli florets quickly and easily. Broccoli is place at the infeed with the core upwards. It is possible to produce broccoli florets in the desired dimensions by manually adjusting the machine while it is in operation. The wast material and the broccoli florets are automatcially fed out of the machine. Lhedpsu Rpt Hofx Aabon

Condition: ready for operation (used), Works fine. Peels and cores without slicing. Lhodpfovf Damex Aaben