Used Barrels for sale (234)

Condition: good (used), 1 x Trowaisiertrommel (Trowaising drum) Mafag VEB SG 2 A with timer Crjdpfoz Hurpex Ai Ssh automatic lowering/lifting The machine can be inspected while powered on.

Condition: used, incl. case for CIP Crsdsz Icp Sjpfx Ai Seh

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx Cedpjy Ufk Rjfx Ai Sorh ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Year of construction: 2012, operating hours: 25,967 h, condition: used, functionality: fully functional, machine/vehicle number: 2525, We offer this used COGEIM TA 30 BANFI TA 30 drum-type shot blasting machine, manufactured in 2012. Machine type: TA30-2892 Serial number: 2525 Year of manufacture: 2012 Minimum air pressure: 5 bar Maximum air pressure: 8 bar Crodpfx Aiozrwy Ne Ssh Weight: 18,000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 90 mm, Clamping force 5000 kN Mould opening force, max. 279 kN Travel force movable platen opening 137,1 kN Travel force movable platen closing 116,8 kN Size of mould platens (h x v) 1370 x 1200 mm Distance between tie bars (h x v) 1000 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 90 mm Cjdsz I Dvyopfx Ai Sorh Ls/D ratio 20 Injection pressure 1839 bar Stroke volume 2290 ccm Shot weight (PS) 2084 gr. Injection rate 604 ccm/s Screw speed 195 1/min Plasticising rate max. 134,2 g/s Nozzle pressure 129,4 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Reservoir capacity 1175 ltr. Dimensions and weights: Dimensions of the machine ca. 8,00 x 2,52 x 2,40 m Total machine weight 28800 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pull on fix plate - 2 x core pulls on movable plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: used, machine/vehicle number: IDC000031, Chip drying barrel Codsrl Ra Hspfx Ai Serh Length - 14 m Width - 3.6 m Drying capacity - 10t/h

Condition: good (used), Continuous Barrel Washer a robust, high-capacity washing solution designed for the efficient cleaning of root vegetables and produce in continuous processing lines. Cedpfx Aezzpr Nei Sjrh

Condition: excellent (used), total length: 8,088 mm, total width: 2,500 mm, total height: 2,095 mm, overall weight: 4,000 kg, Static Autoclave BARRIQUAND STERIFLOW 8 Baskets – Stainless Steel Static autoclave BARRIQUAND STERIFLOW with a capacity of 8 baskets, designed for the sterilization, pasteurization, and heat treatment of packaged food products in industrial batch processes. Manufactured by BARRIQUAND STERIFLOW, the equipment is designed to perform controlled thermal cycles of heating, holding, and cooling, offering a high-capacity solution for industrial canning production lines. Its static configuration of 8 baskets, stainless steel construction, and automatic control system make it particularly suitable for facilities with high production volumes. MAIN FEATURES -Manufacturer: BARRIQUAND STERIFLOW -Type: Industrial static autoclave -Capacity: 8 baskets -Application: sterilization / pasteurization -Static operation -Batch heat treatment -Large-capacity horizontal chamber -Stainless steel construction -Large-diameter front door -Mechanical safety locking system -Automatic cycle control -Control panel with Siemens HMI -Process parameter control -Integrated piping and valve system -Designed for industrial production -Integrable into automatic sterilization lines PROCESS The BARRIQUAND STERIFLOW with 8 baskets is designed to perform controlled heat treatments on previously packaged products. The loaded baskets are placed into the chamber, and once closed, the programmed cycle is executed, controlling the different phases of heating, thermal holding, and cooling. As it is a static autoclave, the packages remain stationary during the process, making it suitable for a wide variety of products and formats that do not require agitation. It can be integrated with: Basket loading and unloading systems Basket conveyors Automatic loaders and unloaders Transfer systems Process water preparation equipment Crjdpfxszkfx De Ai Seh Automatic sterilization lines APPLICATIONS Especially suitable for canning industries, manufacturers of ready meals, vegetable products, fish and seafood, meat products, and pet food that require industrial sterilization or pasteurization processes. Depending on the configuration and process, it can be used with cans, jars, trays, pouches, and other packaging compatible with autoclave heat treatment. The combination of BARRIQUAND STERIFLOW technology, static operation, and a capacity of 8 baskets provides a high-capacity solution for industrial sterilization facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 1993, condition: used, Two identical Dreher centrifugal drum machines are offered. Number of drums: 4, total volume: 20l, drive power: 1.5kW, direction of rotation: clockwise/counterclockwise, speed control: continuously variable. Machine dimensions: approx. 1200mm/1000mm/1600mm, weight: 280kg. An on-site inspection is possible. Cedpszv T I Dofx Ai Sorh

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Crodpfx Ajx Apckei Ssh

Year of construction: 2000, operating hours: 811 h, condition: used, functionality: fully functional, machine/vehicle number: 292, IDE Co-extruder MEB 38/2 Cjdpfxozmnp Rj Ai Ssrh - Motor: 5.2 kW / Max. screw speed: 42 rpm - Screw diameter: 38 mm - Screw length: 25D - Smooth, single-piece barrel - 4 barrel heating zones - 1 flange heating zone - 1 die heating zone - KS 40 controller - 3-zone screw - Die connection: IDE M48x2 - Melt pressure and melt temperature measurement - Height-adjustable - Tilt-adjustable - Barrel and screw in very good condition - First-hand ownership, very well maintained, only 811 operating hours, used only in a technical center.

Condition: new, Year of construction: 2013, functionality: fully functional, Dürr RAM Station Double barrel pump Pumps and dosing concept MPDK X20: Type L10011525 - Pneumatic gun PVA08/40 - Heatable hose KMHH6007/040 Cedpfx Aeu Eqkvei Sjrh - Electric dosing unit ED150/7 The device is unused!!!

Condition: used, functionality: fully functional, total length: 1,200 mm, total width: 1,050 mm, total height: 1,350 mm, For sale: Inject Star mixing drums. We have 19 drums available, including 15 with lids. Net price per drum: 500 EUR. Price negotiable for larger quantities. Csdpfx Aszguf Esi Sjrh Dimensions: Depth 120 cm, Width 105 cm, Height 135 cm with wheels, Height with wheels and lid 156 cm; approximately 900 liters. Weight of the drum without lid: 162 kg.

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Manufacturer - Riggs Autopack Ltd. Codpfx Aowpunboi Serh Model - 1000 Series 3. Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts Csdpozxxifefx Ai Sjrh One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: used, Year of construction: 2000, Overview The SAME barrel support cradles are V-shaped metal supports specifically designed for wineries, ensuring stable and secure positioning of oak barrels during storage, handling, and washing operations. Their geometry guarantees optimal load distribution and perfect barrel support, reducing stress on the barrel structure. SAME standard supports are fully compatible with automated barrel washing lines, making them ideal for professional cellar operations. Technical Data:  A total of 488 units are included in this lot. Key Features - Equipment Type: Barrel support cradles / sleepers for wineries - Design: V-shaped structure for secure barrel positioning - Barrel Capacity: 2 barrels per support - Compatible Barrel Sizes: 225 to 700 liters - Manufacturing Process: Robotic MAG continuous wire welding - Structural Strength: High resistance to load, handling, and mechanical stress - Surface Finish: Oven-cured polyester powder coating Codpfxeyiamrs Ai Sorh - Compatibility: Suitable for automated barrel washing systems - Application: Wine cellar barrel storage and handling - Quantity: 488 units Dimensions (Standard 225 L Barrel Support) - Length: 1,430 mm - Width: 610 mm - Height: 364 mm

Condition: excellent (used), Year of construction: 2023, operating hours: 421 h, functionality: fully functional, Equipment: CE marking, Multiplas V4 Injection molding Machine (new 2024) We are offering for sale a well-maintained vertical injection molding machine from 2024 which is currently being used in a clean and well maintained production facility outside of Oslo, Norway. Price: 25.000 EUR This Multiplas vertical injection molding machine ensures precise positioning, enhancing the overall quality of your products. With precise control over injection speed, pressure, and temperature, you can produce high-quality parts with tight tolerances, minimizing waste and maximizing yield. Traditional horizontal injection molding machines require significant floor space, limiting your production capacity. In contrast, vertical injection molding machines utilize vertical space efficiently, allowing you to maximize your factory's footprint. With a smaller footprint, you can optimize your layout and increase machine density. Vertical injection molding machines excel in molding complex, intricate parts with precision. Their vertical clamping and injection units facilitate seamless integration into multi-component molding processes, enabling you to manufacture diverse products with varying material properties. General information: • Manufacturer: Multiplas Enginery Co. LTD • Model: Multiplas V4, V2C-50T • Serial number: on request • Year of manufacturing: 2023, delivered 2024 • Operating hours: 421 • Dimensions (L/W/H): 2,3 x 1,5 x 3.7 m • Weight: 3,4 ton • Functionality: fully operational Credpfxjw S Ewqe Ai Sjh • Condition: very well maintained Extras: • TPU Screw and barrel • CE Certificate • Color RAL 9002 • 400V Transformer • Installation guide • Machine Manual Machine Specifications: • Screw diameter: 35 mm • Theoretical Injection Volume: 154 cm3 • Injection Capacity (PVC): 145 gm • Injection Pressure: 1383 kg/cm2 • Injection Rate: 69cm3/sec • Plasticizing Capacity (PVC): 53 kg/hr • Screw Rotation speed: 186 r.p.m. • Heater Capacity: 3,9 kw • Clamping Force: 55 ton • Min. mold Thickness: 350 mm • Opening Stroke: 300 mm • Max. opening Thickness: 650 mm • Ejector power: 1,8 ton • Electrical Power: 10/7,5 hp/kw • Oil tank Capacity: 160 L • Cooling water Capacity: 230 l/hr • Machine size: 2,3 x 1,5 x 3,7 m • Machine weight: 3,4 ton Can be viewed on site. More pictures and videos can be sent to interested buyers. The machine is ready to be sold immediately.

Condition: used, industrial barrel washing machine Overall size: 1900 x 1450 x 2350 mm Cjdpfey E Tw Tjx Ai Serh Without pump

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 4977, screw conveyor diameter: 60 mm, Leistritz ZSE 60 max.X-44D Extruder (2018) comprising Csdpfjz Akmqex Ai Serh Leistritz ZSE 60 max.X-44D twin-screw extruder with 2x 60 mm diameter screws 40:1 L/D ratio, co-rotating 10-barrel housing section, electrically heated and water-cooled 2 degassing ports 1200rpm max.imum screw speed Motor with Flender direct-driven gearbox

Condition: used, Year of construction: 1998, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Csdjz D U Rmepfx Ai Serh Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN INJECTION UNIT (840) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1946 bar Stroke volume: 442 cm³ Shot weight (PS): 400 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 14.8 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: ready for operation (used), Year of construction: 2012, operating hours: 52,000 h, functionality: fully functional, clamping force: 13,000 kN, screw diameter: 95 mm, Clamping force 13000 kN Mould opening force, max. 910 kN Travel force movable platen opening 217 kN Travel force movable platen closing 153 kN Codpfx Aez Hngysi Ssrh Size of mould platens (h x v) 2210 x 1910 mm Distance between tie bars (h x v) 1570 x 1270 mm Mould opening stroke 2350 mm Mould height min/max 700/1400 mm Max. daylight 3050 mm Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 2173 bar Stroke volume 3721 ccm Shot weight (PS) 2642 gr. Injection rate 659 ccm/s Screw speed 150 1/min Plasticising rate max. 105 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 59 kW Adjustable barrel heating zones 7 Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 13,00 x 4,00 x 3,00 m Total machine weight 64000 kg Max. mould weight 29000 kg Accessories: - Anti vibration pads - Sepro Robot 4050 S3 Trans Additional Options: - 3 x core pulls on movable plate - 3 x core pulls on fix plate - 2 x air valve - 6 x hydr. shot off nozzles - 16 x hotrunner controller - Robot interface according to Euromap 67

Condition: used, Item: D-7806-Rectangular vat 2400 L Used Stainless Steel Rectangular drum, Insulated, 2400 L Crodpfx Ajviukdoi Seh Dimension: 143 X 183 x 115 cm Outlet valve 2,5"

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 Codpfx Aioya Eldj Sorh • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: new, We offer you high-quality roll-off containers as water tanks/water reservoirs, manufactured to your specifications using a self-supporting design. Available to order! Europe-wide delivery! ---FINANCING---LEASE PURCHASE---LEASING--- -possible, please contact us!- Cedpfxszhwcce Ai Sjrh Possible dimensions: 4 - 7.0m x 2.30 x 1.0m Possible internal heights: H = 800 mm H = 1000 mm H = 1100 mm H = 1300 mm H = 1500 mm Optional: Rear platform for mounting a water pump Other dimensions available on request!!! We will gladly design according to your specifications. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Base: 5 mm Walls: 3 mm Roof: 3 mm Cross member: INP 180 Lifting bracket Ø 50 mm, hook height 1,570 mm - 2 internal baffle plates - Internal level indicator with float - Dome lid with rubber seal, 50 x 50 cm - 1x C-Storz connection below the level indicator - Front/top vent with shut-off valve - Rear with approx. 50 cm platform - Rear with 1x C-Storz connection - Rear with 1x 6-inch flange -> Watertight welded with 24-hour leak test - Primed once internally, twice externally - Externally painted twice in a single color according to your desired RAL color Optionally available: - Protective coating inside, according to specifications for the respective application - Fully galvanized version - Anti-slip coating on the roof - A-B-C Storz connection of your choice - Hydraulic dome lid - Additional rear hydraulics for slide valve - Subframe UNP220 for 22t total weight!

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: LE-2104-133, For Sale: Labtech LE30-30/C 3D Filament Extrusion Line We are offering for sale a high-quality 3D filament extrusion line manufactured by Labtech Engineering Co., Ltd., a well-known producer of laboratory and production extrusion equipment. Technical Specifications Manufacturer: Labtech Engineering Co., Ltd. Model: LE30-30/C Year of Manufacture: 2021 Power Supply: 400 V Phase: 3 Installed Power: 16.7 kW CE Certified Price: EUR 45,000 Condition The machine is in excellent condition, has been professionally maintained, and is ready for immediate production use. Included in the Sale Complete 3D filament extrusion line Additional spare barrel 25mm Additional spare screw 25mm/24D Optional Equipment Available for Purchase Laser diameter gauge Credpfx Ajzgwlzji Ssh Material dryer Material feeding/dosing system This extrusion line is suitable for the production of high-quality 3D printing filaments and offers reliable operation with consistent output quality. Additional photos, technical details, and machine inspections can be provided upon request. Location: Ivanka pri Nitre