Used Corner Rounder Cutter for sale (5,443)

Condition: good (used), Double side corner cutter Very good condition. This is a professional, production device for rounding corners. Solid construction ensures precision of operation. Two trimming heads. Bdodpfx Ansz N Sixodji Interchangeable knives. Adjustable margins. Controlled by foot pedal. One set of 8mm knives included Stack height approx. 80mm Weight 100kg Efficiency 20 cycles/min Compressed air supply.

Condition: good (used), Samed Innovazioni MM 1 Corner cutter for hardcovers Bsdpfez N Sh Ujx Andedi Produced in Italy, Samed Innovazioni Rebord. Very good condition. This is a professional, production device for cutting corners for hardcover. Year of production 2014. Solid construction ensures precision of operation. Interchangeable knives. Adjustable cutting depth. One set of knives included.

Condition: good (used), Karl Tranklein EK-100 Corner Rounder Made in Germany. Very good condition. This is a professional, production-grade corner rounding machine. Bdsdpfx Anjz Rk Rqedji Sturdy cast iron construction and strong pressure ensure precise operation. Replaceable blades. Adjustable margins. One set of blades with a 12 mm radius is included. Stack height: 100 mm Weight: 130 kg Cycles per minute: 50 cycles/min Power supply: 400 V Waste is directed outside the machine to the chutes. This is the model currently in production.

Condition: good (used), Tranklein EH I corner cutter Made in Germany. Perfect condition. This is a professional device for rounding corners. Solid cast iron construction, strong pressure ensure precision of operation. Interchangeable knives. Adjustable margins. A knife with a radius of 4 mm is included. Stack height 55 mm Bsdpfxoz N Si Se Andedi Weight 32 kg This is the currently produced model.

Condition: used, Year of construction: 1982, Format: 0x0 Bsdpfsx Rh Dxox Andsdi Equipment: Corner cutter, manual

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Shackle pitch: 6" Length (X): 2508 mm Height (Y): 2985 mm Width (Z1): 1693 mm Iebttsv Au Nge Shdfoar Width (Z2): 3092 mm Width (Z3): 2580 mm Weight: 1535 kg Water consumption: 1.0 m³/h Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP Bdodpfowdic Aex Andji

Condition: used, Format: 0x0 Bdedpfx Ajx Rh D Eendoi Equipment: Corner cutter

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture: 2021 (Table machine) For stationary profiling of head edges on soft-forming and post-forming workpieces. Also for edge trimming on thick PVC edges with right-angled workpieces and multi-sided gluing. The processing of symmetrical and asymmetrical soft-forming and post-forming profiles is possible after manual Bjdskwhapepfx Andsdi profile depth adjustment. The motor feed is performed manually by sensing the workpiece. Basic equipment: - Workpiece stop system - Pneumatic clamping cylinder - 1 milling motor, 0.8 kW, steplessly adjustable up to 27,000 rpm, standardly equipped with radius cutter R=2. Sensing is performed by a guide ring on the workpiece. - Aggregate guidance on precision linear guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Soft-forming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on the edge material) Milling tool: Radius cutter R 2 Electrical connection: 230V / 50Hz / 1 phase Total connection: 0.8 kW Pneumatic connection: 6 bar Space requirement: approx. 740 x 460 x 500 mm Net weight: approx. 45 kg Availability: short-term Location: Solingen

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 213, Atla Coop - Schuco CC120A Bdedpfx Asxvnwtjndei Compact corner crimping machine. Various assembly steps can be efficiently implemented at just one workstation: punching the frame, milling the glue holes and injecting the glue into one or two-chamber profiles. The option to switch off the cutter and adhesive injection makes the machine universally applicable for different aluminium profiles, and manual controls for the cutter and pump facilitate handling. Equipped with Schuco knives, Schuco bracing clamp, triangular support benches, user manual.

Condition: ready for operation (used), functionality: fully functional, Fatosa Frozen Meat Slicer, Frozen Blok Cutter Sold on behalf of a customer – functioning machine, sold as is, without warranty, no returns. Bdsdpfxozmp Rpo Andsi

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 170.012.100, Brand new Holmatro hydraulic shears. Perfect for auto recyclers, for cutting catalytic converters, etc. The shears are brand new, manufactured in 2024, but have never been used. Bdodpfxszcyrwj Andsi Includes a complete service kit.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 221363, working width: 400 mm, passage height: 250 mm, total length: 1,300 mm, total width: 1,070 mm, total height: 1,450 mm, height adjustment type: mechanical, overall weight: 600 kg, working height: 900 mm, compressed air connection: 6 bar, extraction nozzle diameter: 100 mm, type of input current: three-phase, power: 8.73 kW (11.87 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 250 mm, workpiece width (max.): 400 mm, empty load weight: 580 kg, input current: 16 A, Equipment: emergency stop, rotational speed infinitely variable, This used cross-cutting machine, equipped with one brushing unit, is designed for creating textures on wooden surfaces. The combination of the cross-cutting unit and the brushing unit allows for the creation of various effects, including authentic band saw textures and other natural surface patterns. The machine features a TAP function that enables the application of a random effect to the workpiece. This is achieved using five separate tapping heads above the sanding belt. A compressed air connection is required for the operation of this function. By adjusting the transport speed, the settings of the cross-cutting unit, and the brushing unit, the intensity of the process can be easily controlled. This allows for the creation of a wide range of textures and finishes, depending on the desired end result. The machine is suitable for processing various wooden products, including wooden floors, wall panels, furniture components, doors, and other wooden products where a distinctive surface texture is desired. This particular machine is offered as a used machine, is in very good condition, and is immediately available. For additional information, technical specifications, or photos, please contact us. Bedps Aazymefx Andedi

Condition: excellent (used), CATALOGUE NUMBER 8010 TECHNICAL DATA Equipment: - platen - pre-milling - strip feeder - 2 glue tanks: for granules and cartridges - hot melt glue (granules) currently in the machine - guillotine – pre-trimming of the veneer - 3 pressure rollers - 2 trimming units with saws for final trimming - 2 milling units for edge profiling (radius milling cutters) - corner rounding unit - edge sanding units – for removing excess glue - polishing units - stepless feed speed adjustment 8-18mm - workpiece thickness 6-45mm - min workpiece length 180mm - min workpiece width 600mm - max thickness of veneer fed from a roll 3mm - air consumption 6-8 bar - diameter of dust extraction nozzle 7x80mm, 1x130mm - dimensions L/W/H 6650x1260x1700mm - weight 1850kg ADVANTAGES - German production - spray system - pre-milling and corner rounding Bsdpfszw Dx Aox Andedi - 2 glue tanks - 4 additional milling cutters included - unpainted - original technical documentation + CE - very good condition - used veneer edging machine Net price: 49900 PLN Net price: 11605 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: like new (used), Cutter CFS GEA CutMaster 500 VACUUM Bdjdpfxeyn Dy Ns Andsi After capital renovation 3 months warranty for parts

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, electronic double sheet detection, registration mark BS + AS, machine height adjustment 300 mm, 1 die-cutting frame, 2 stripping frames and 1 set of stripping pins, quick centering device for sheet stack, manual non-stop system at the feeder, manual non-stop system at the delivery, price includes loading onto a truck (no container loading or sea freight packaging included!) In May 2026, a PLATEN CONDITIONING was performed by BOBST on the machine; all deposits were removed from the upper and lower platen, and the cylinder was polished. The sector was opened and assessed as being in "as new" condition. Photos, video, or invoice available upon request! Attention: The platform must be adapted by the buyer! Longitudinal handrail is missing! Technical main data: Maximum sheet format: 720 × 1020 mm, Minimum sheet format: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Equipment features of the series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast setup times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double sheet detection Attention: Bsdozmyfdepfx Andedi In addition to the machine, the following can be purchased separately for an extra charge: - Foundation/die-cutting frame turning table (third-party manufacturer) (see photo) - Die-cutting frame (see photo) - Honeycomb foundation - Turning table/preparation table, waste stripper (see photo) - Extra stripping frames and stripping tools (see photo)

Condition: used, Elektrischer Eckenrunder / Electric Corner Rounder Pescha EK 100 Elektrischer Eckenrunder / Electric Corner Rounder Pescha EK 100 mit 3 Werkzeugen / with 3 Set of Blades Serial-No. 202 076 Geschwindigkeit / Speed max. 50 cycles/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Bodjz H Aw Hspfx Andjdi On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Please refer to the images for all technical specifications. Transport and loading can be arranged throughout Europe for an additional charge upon request. Prices are subject to VAT. Viewing is possible by appointment. Contact us—our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MUCH MORE. Do you need a high-quality yet affordable machine for your production? Or are you looking to sell yours? Bjdpfx Ajzvnnfendsdi For further information or contact options, please reach us via the contact form.

Condition: like new (used), Year of construction: 2024, operating hours: 80 h, functionality: fully functional, machine/vehicle number: Seriennr. 3073196, working width: 380 mm, type of input current: AC, input voltage: 220 V, total width: 800 mm, total length: 2,820 mm, total height: 1,070 mm, stack height: 400 mm, Equipment: safety light barrier, The Morgana RDC 3852 is a digital rotary die-cutter for print finishing, enabling die-cutting, kiss-cutting, creasing, and perforating in a single pass—ideal for the digital print market and short runs. It utilizes flexible magnetic dies and features an air suction feeder for materials up to 400 gsm (up to 368x508 mm), an automatic waste stripper, and rapid job changeover, making it highly efficient for producing tailored products such as labels, cards, and tickets. Bdsdpfex Syvcjx Andji

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge Bjdpexwtu Tofx Andsdi 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: good (used), Good condition. Warranty & Delivery Component: complete delivery car The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing this machine, you have a 6-month warranty and a 5-year post-warranty. Worldwide Delivery We always have more than 1000 machines in stock so that each customer can choose from several options. 
With over 20 years of experience in the textile industry and over 10,000 satisfied customers, we make sure that your plans become successful businesses! Bdsdpslmnzqjfx Andji

Condition: used, Bertuetti Universal Dough Cutter. In working condition. With two dusters. Belt 400mm wide One additional cutter included. Bedpfotpvt Tjx Andodi Price € 590 We can organise shipping if you require this service

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm Bjdpfxj Aaw Uas Andodi The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Year of construction: 2020, operating hours: 414 h, condition: used, functionality: fully functional, machine/vehicle number: C-322-K7-13853, We offer this used MultiCam Celero 7 Flatbed cutter / CNC Router, year of construction 2020. Serial Number: C-322-K7-13853 Year of Manufacture: 2020 year Voltage: 380 V Phases: 3 Ph Current: 58.2 A Power: 38.3 kW Frequency: 50/60 Hz Comes with HF Spindle, Two Knife modules, ATC, Depth Adjustment Sensor, Laser Pointer Bdedpfxezvvc Dj Andji If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of manufacture: 2021 Empty weight: 620 kg Dimensions of cargo space: 279 x 89 x 126 cm Technical condition: good Visual appearance: good Production country: NL Please contact Christian Theißen for more information Bsdsz R S I Sspfx Andsdi Manufacturer: Vermeer Corporation Model: Stump Cutter SC362 Year of build: 2021 Condition: Used Data: Drive type: 35 PS Performance: 21,1 kW Fuel type: Benzin Number of milling teeth: 16 Milling height: 61 cm Milling radius: 119 cm Milling depth: 38 cm Transport dimensions LxHxW: 2,79 x 0,89 x 1,26 m Empty weight: 620 kg Special features: Caterpillar drive Price on demand Location: 41468 Neuss Available immediately

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Bdodpfxoz N Sftj Andsi Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.