Used Crimp for sale (152)

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, UNITECH designs and manufactures pneumohydraulic presses with nominal pressing forces from 10 to 600 kN, available in C-frame, two-column (two-post) and four-column (four-post) designs. The advertised price of EUR 4,000 net (excluding VAT) applies exclusively to the basic 10 kN model. All other press models and equipment configurations are quoted individually according to the required pressing force, frame design, stroke lengths, working area, control system and safety equipment. This listing covers the complete UNITECH range of new pneumohydraulic presses for industrial assembly and production applications. Each press can be configured to suit the workpiece, tooling and intended manufacturing process. TECHNICAL RANGE Nominal pressing forces: – 10, 30, 50, 100, 150, 200, 300, 400 and 600 kN Available frame designs: – C-frame Blsdpsv Snixefx Aptsp – Two-column (two-post) – Four-column (four-post) Stroke ranges: – Power stroke: 5–20 mm – Total ram stroke: 50–250 mm The available combinations of pressing force, frame design and stroke lengths depend on the selected configuration and application. OPERATING PRINCIPLE The pneumohydraulic drive combines a fast pneumatic approach stroke with a short, hydraulically intensified power stroke. The full pressing force is generated only during the working phase of the cycle, providing an efficient solution for industrial pressing and assembly operations. TYPICAL APPLICATIONS Subject to the selected configuration, tooling and process-specific risk assessment, the presses can be used for: – Press-fitting and component assembly – Inserting bearings and bushings – Riveting and crimping – Punching and marking – Bending and forming – Straightening and calibration CUSTOM CONFIGURATION The following parameters and equipment can be adapted to the intended application: – Nominal pressing force – Frame design – Working area and installation dimensions – Power stroke and total ram stroke – Tool and workpiece mounting – Control system and operating sequence – Application-specific guards and safety equipment – Integration with production lines and auxiliary equipment DOCUMENTATION, ACCEPTANCE AND DELIVERY Complete machines are supplied with CE marking, an EU Declaration of Conformity and operating instructions in the agreed language: Polish, English or German. A Factory Acceptance Test (FAT) is carried out prior to dispatch. The presses are covered by a 12-month warranty. Standard delivery terms are FCA UNITECH, Zawiercie, Poland (Incoterms 2020). REQUEST FOR QUOTATION To receive a technical proposal and quotation, please provide: – Required pressing force – Preferred frame design – Workpiece and tooling dimensions – Required working height and working area – Required power stroke and total ram stroke – Description of the manufacturing process – Required control and safety equipment – Expected cycle time or production rate The photographs show examples of UNITECH press configurations and may include optional equipment. The final technical specification, price and delivery time depend on the selected configuration.

Condition: new, plate thickness 2,5 mm roll diameter 98 mm throat 160 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop Blodjfv H Ehepfx Aptop

Condition: new, Year of construction: 2026, - Capacity: 1.2 mm - Expansion: 250 mm Bedsgg Nrkjpfx Aptolp - Includes 8 sets of rollers

Condition: used, Year of construction: 2000, machine/vehicle number: LC593, Used complete pharmaceutical filling glass line - 3500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete, second hand pharmaceutical packaging solution designed for the filling and packaging of glass bottles for infusion-type applications. The line is currently in production and supports multiple dosage formats with integrated washing, filling, capping, crimping, sterilization, inspection, labeling, cartoning, and palletizing. Engineered for sterile handling, it uses purified water (PW), water for injection (WFI), and sterile compressed air in critical stages.Production speed: 3500 bottles per hourBottle volumes supported: 0.2L, 0.25L, 0.4L, 0.5LContainer type: Glass bottles (infusion/IV-style)Line configuration: Depalletizer, Bottle Washer (PW/WFI + sterile air drying), Filler, Vacuum stage, Bottle Capper, Aluminum Crimping Machine, Tray Loader, Autoclave, De-trayer, 2 x Manual Inspection Stations, Labeling Machine, Cartoning Machine, Carton Sealer, PalletizerSterilization: Autoclave by SBMOperation status: In productionAdvanced Automation & Control SystemsThe line features integrated handling and synchronized conveyors to maintain steady flow through washing, filling, closing, and terminal packaging stages. Manual visual inspection stations are positioned downstream of sterilization to ensure product quality. Format changeover is designed to handle multiple bottle sizes from 0.2L to 0.5L, enabling efficient batch transitions. Standard pharmaceutical best practices such as sterile air drying and clean utility segregation support controlled operations. Electrical parameters and PLC/HMI specifications are line-dependent and can be aligned with site utilities.Production Line Integration CapabilitiesAs a complete packaging line, this system operates in-line from depalletizing to palletizing. The upstream sections prepare and clean glass containers, the midstream modules manage accurate filling and secure closure with crimping, and the downstream area performs sterilization, inspection, labeling, case packing, sealing, and palletizing. The line offers multi-format flexibility for 0.2L, 0.25L, 0.4L, and 0.5L glass bottles and can be integrated with site-level quality systems and traceability procedures. Conveyors and accumulation zones are configured to balance cycle times across process steps.Machine Condition & Maintenance HistoryThe line is currently in production, indicating ongoing operability and maintained status. Washing with PW/WFI and sterile air drying underscores disciplined hygienic routines aligned with pharmaceutical processing. Regular operation across all stations—from depalletizer through palletizer—demonstrates a cohesive, production-ready asset suitable for immediate deployment after site adaptation.Operational Performance & VersatilityDesigned for glass bottles and sterile liquid products, the line combines precise filling with a dedicated vacuum stage and reliable closure via capping and aluminum crimping. The presence of an autoclave enables post-closure sterilization, while dual manual inspection stations provide visual particle control. The labeling, cartoning, ... Bsdpfxeydpa To Aptslp

Condition: good (used), Pressing pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand pressing pliers, cable cutters, cable shears, hydraulic cable cutters -Manufacturer: VEB WMW, Hydraulic cable cutter with built-in hand pump -Type: PT 300 08 300 -Passage: 45 x 27 mm -Dimensions: 710/130/H115 mm -Weight: 9.7 kg Bsdpfxsvu Tv Ne Aptolp

Condition: new, Year of construction: 2025, functionality: fully functional, throat depth: 600 mm, sheet thickness steel (max.): 5 mm, sheet thickness copper (max.): 5 mm, sheet thickness brass (max.): 5 mm, sheet thickness aluminum (max.): 5 mm, For sale JURADO ALS 600 device. A device for connecting steel, aluminum, copper sheets, up to 5 mm total thickness using the clinching technology. The maximum throat depth is 600 mm. The distance between the punch and the die: 8 mm Blsdpfx Asvncfgsptsp A device in hydraulic-pneumatic technology.

Condition: good (used), Beading machine, flanging machine, seam closing machine, motorized beading machine -Max. sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Protrusion: 50 mm Bsdsb A Ncropfx Aptelp -Dimensions: 900/800/H1100 mm -Weight: 250 kg

Year of construction: 2025, condition: used, A Set of 6 Merck Millipore Lynx ST Connector 1/2 in Fractional Triclover Code STC21THN01 Unused and in Original Packaging This is for 1 Unit although 50+ in stock Expiry Date: 31st August 2026 Bljdjxv Afropfx Aptop Sterilized fluid transfer systems containing tubing, connectors, clamps, valves, and disconnectors provide a critical link between disposable fluid paths and the various steps in your aseptic process, whether that is plastic-to-stainless or plastic-to-plastic. We offer three types of connectors and a crimping tool for sterile disconnection. We also can configure standard single-use assemblies with common types of commercially available tubing, such as platinum-cured silicone and C-Flex® 374 thermoplastic elastomer. Reliable and easy to use, Lynx® connectors feature unique designs that enable fluid transfer and maintain sterility. Lynx® connectors are available separately or as part of a complete assembly

Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers -Separating wedge: Split wedge, hydraulic -Intermediate dimension: 67 mm -Insertion width: 70 mm -Number: 2x wedge tool available Bsdpjvvafyefx Aptjlp -Price: per piece -Dimensions: 410/130/H62 mm -Weight: 6.5 kg/piece

Condition: good (used), beading machine, hand beading machine, flanging machine, seam closing machine, manual beading machine Bljdpfx Ajcmtntoptop -max. sheet capacity: 1.0 mm -Projection: 200 mm -Tool holder: Ø 24 mm -Stop plate: adjustable -Dimensions: 750/700/H1500 mm -Weight: 120 kg

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines • maximum free space for material bending thanks to the F-geometry for the bending beam • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/100 mm and 24/100 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Blsdpfxolbilvs Aptjp Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: used, Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end ferrules, wire end ferrules, cable lugs, manual crimping pliers -Lever arms: extendable 250 mm -for: various press jaws -Inserts for: Cable lugs DIN 46234 installed Blsded Nzg Aspfx Aptep -Dimensions: 575/140/H50 mm -Weight: 2.6 kg

Condition: good (used), Button machine, knee lever press, crimping machine, eyelet machine, workshop press with foot pedal -Knee lever press: with foot pedal, on solid base frame Bsdet E D Dnjpfx Aptslp -Table size: 260 x 180 mm bore Ø 60 mm -Spindle holder: Ø 32 mm -Intermediate dimension: 135 mm -Dimensions: 460/400/H1450mm -Weight: 113 kg

Condition: used, Electronic crimpers provide secure, reproducible crimps. A single press of the button both closes the crimping jaws to attach the seal and opens them to release the vial. Decappers provide quick and easy removal with a single press of the operation button. Adjustable crimp settings allow compatiblity with standard aluminimum, pressure-release, tin-plated steel and bimetal two-piece seals† Ergonomic design reduces wrist strain Controls and indicator lights are visible and accessible for left- or right-handed operation Crimpers and decappers can be operated while plugged in and recharging Vials can be crimped or decapped while they remain in most standard removable sample trays Crimp-force sensing automatically determines when a proper seal has been formed and opens the jaws to release the vial Bedpoxzhy Sofx Aptolp

Condition: used, machine/vehicle number: 92, Continous Form Collator Micro Pack S 50Serial-No. 92-164 / 1992/51/ mpkc 6 Stationen / Stations Format / Size max. 330 x 12 Zoll Bjdpfx Aporbnnpotolp umstellbar bis auf 7 Zoll / convertible until 7 inch Standard 240 x 12 Zoll / inch Einlauf breite bis / Infeed width until 55 cm Crimpung alle 2 Zoll mit Ersatzmesser / Crimp every 2 inches with spare blade Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Crimping jaws, crimping tools for cable end sleeves, wire end sleeves, cable lugs -for: cable end sleeves -Sizes: approx. Up to 28 mm² -in the suitcase -Dimensions: 490/300/H70 mm Bedpfx Apsd Ar Utotelp -Weight: 22.4 kg

Condition: used, Technical details: tube diameter: siehe o mm wall strength: siehe o mm voltage: 230 V / 1Phase V total power requirement: 0,55 kW machine weight approx.: 56 kg dimensions L x W x H: 0,45 x 0,37 x 0,35 m Bsdou Icu Sspfx Aptjlp HYDRAULIC LINE PRESETTING DEVICE for EO pipes Application for crimping flared fittings on hydraulic lines. Crimping of common raw materials such as steel (ST 35.4 NBK and-or ST 37.4 NBK and-or ST 52.4 NBK), stainless steel (1.4571/1.4541/316Ti or similar) and copper pressure-controlled There is a flaring tool for the size Ø 14mm on the machine. The operating pressure is variably adjustable. *

Condition: good (used), Crimping tool, cable lug crimping tool, mechanical crimping tool -for: large cable lugs, hoses -up to: 60 mm² -Number: 7x hand press jaws available Blodpfx Apob A Sfrjtop Price: per piece -Dimensions: 650/220/H45 mm -Weight: 8 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: AWPC 6005, total width: 5,000 mm, total length: 8,000 mm, total height: 2,000 mm, Automatic Wooden Pallet Collars The machine equipment is specified below in sequence: 1-Automatic Wood Feeding Unit 2-Automatic Drilling and Nailing Unit (including Automatic Nail Feeder) Bedpfxezi Tvbe Aptslp 3-Automatic 180-Degree Turning Unit 4-Automatic Hinge Pickup and Positioning Unit 5-Automatic Crimping Unit 6-Automatic Marking Unit 7-Automatic Stacking Unit 8-Automatic Width Adjustment System All mechanical components, pneumatic equipment, and electrical components included in the machine are covered within the quoted price. The pneumatic components are configured with Festo products, and the automation system is configured with Mitsubishi components. The product specifications for operation on the machine are as follows: Board Length: 700 mm – 1600 mm Board Width: 180 mm – 230 mm Board Thickness: 15 mm – 25 mm Line Capacity: 300 products/hour (capacity may be increased depending on the product dimensions being processed) Installed Power: 40 A, 380 VAC, 50 Hz Air Consumption: 1,500 liters/minute Machine Weight: 9,500 kg The entire machine has been designed by EFO Makina. Dimensional revisions and changes to material brands can be implemented in accordance with the customer's requirements. All CE certification documents, spare parts lists, and operation manuals related to the machine will be supplied together with the machine upon delivery.

Year of construction: 1999, condition: used, Technical Data Connection Data Power supply: 380 V Drive: three-phase motor, 0.75 kW, with electronic brake Blodpfxexcuqas Aptjp Processable cables Cross-section: up to 6 mm Motor speed: 1420 rpm, fixed Pressing force: 20 kN Stroke length: 40 mm Stroke time: 0.3 s Top dead center (TDC) infinitely adjustable Variable bottom dead center (BDC)

Condition: new, Year of construction: 2026, High-performance deburring machine for simultaneous internal and external deburring of profiles and pipes in a single operation (approx. 3 seconds). Powerful industrial gear three-phase motor with frequency control, allowing stepless speed adjustment: 600 – 2,700 rpm. Designed for deburring pipes and profiles with material dimensions (horizontal/vertical) up to 120 mm. Easily adjustable working table height (adjustable and lockable) to match the required material size. Adjustable, lockable feed (carriage) of the deburring brushes to the working table via hand wheel with locking function. Drawer for dust residue collection. Sheet steel housing prepared for connection to an external extraction system. Folding covers for easy brush changeover. Machine body color: RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm crimped steel wire. Power cable with CEE plug. Operating tools included. 12 months warranty for single-shift operation. Bledonvfl Aspfx Aptsp Working height: 1050 mm Speed: 600 – 2700 rpm Weight: 410 kg Machine dimensions: 680 x 1200 x 1380 mm Power: 3 kW Electrical connection (V/Hz): 400/50 Brush diameter: 250 mm Standard brush width: 60 mm. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU THE FULL FLOTT PRODUCT RANGE! REQUEST AN OFFER TODAY!

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, warranty duration: 6 months, SINGLE-HEAD DISPENSING AND CRIMPING UNIT for screw caps Equipped to handle screw caps with a diameter of Ø 28X18 with a feed chute and a vibratory bowl Bledps Agn Hqjfx Aptep 1 crimping head CRAM protection In-line insertion machine (without motor or gearbox)

Condition: used, Crimping pliers for crimping cable lugs and connectors with interchangeable blades for the processing range of 10 - 120 mm² available blade inserts: 10, 35, and 70 mm² Overall length: 660 mm Bedpfx Ajcabzroptelp Weight: 4.1 kg

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers Bljdpfx Ajvu Sqxjptjp -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 120 x 330 mm -Weight: 11.4 kg

Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers, cable shears, cable cutter Bjdpfx Ajvvagdjptelp -cable cutters: Split wedge Separating wedge, hydraulic -Intermediate dimension: 95 mm -Wedge length: 100 mm -Number: 3x wedge tools available -Price: per piece -Dimensions: 550/100/H175 mm -Weight: 13.5 kg/piece